PHP 8.4.0 RC2 available for testing

Fibers

Fibers overview

(PHP 8 >= 8.1.0)

Fibers represent full-stack, interruptible functions. Fibers may be suspended from anywhere in the call-stack, pausing execution within the fiber until the fiber is resumed at a later time.

Fibers pause the entire execution stack, so the direct caller of the function does not need to change how it invokes the function.

Execution may be interrupted anywhere in the call stack using Fiber::suspend() (that is, the call to Fiber::suspend() may be in a deeply nested function or not even exist at all).

Unlike stack-less Generators, each Fiber has its own call stack, allowing them to be paused within deeply nested function calls. A function declaring an interruption point (that is, calling Fiber::suspend()) need not change its return type, unlike a function using yield which must return a Generator instance.

Fibers can be suspended in any function call, including those called from within the PHP VM, such as functions provided to array_map() or methods called by foreach on an Iterator object.

Once suspended, execution of the fiber may be resumed with any value using Fiber::resume() or by throwing an exception into the fiber using Fiber::throw(). The value is returned (or exception thrown) from Fiber::suspend().

Note: Due to current limitations it is not possible to switch fibers in the destructor of an object.

Example #1 Basic usage

<?php
$fiber
= new Fiber(function (): void {
$value = Fiber::suspend('fiber');
echo
"Value used to resume fiber: ", $value, PHP_EOL;
});

$value = $fiber->start();

echo
"Value from fiber suspending: ", $value, PHP_EOL;

$fiber->resume('test');
?>

The above example will output:

Value from fiber suspending: fiber
Value used to resume fiber: test
add a note

User Contributed Notes 8 notes

up
89
user at csa dot es
2 years ago
Perhaps not using the same variable name everywhere will be a good idea

<?php
$fiber
= new Fiber(function (): void {
$parm = Fiber::suspend('fiber');
echo
"Value used to resume fiber: ", $parm, PHP_EOL;
});

$res = $fiber->start();

echo
"Value from fiber suspending: ", $res, PHP_EOL;

$fiber->resume('test');
?>
up
32
Ali Madadi
2 years ago
Here is a simple scheduler and thread pool that implements multithreading using fibers and tick functions in PHP 8.1 and returns the return value of each function in the pool in an array at the end.

Note that due to some bugs, you need to register a new tick function for each "thread". Remember to unregister all of them at the end.

The link bellow is the discussion on a bug that is going on right now (At the time of writing this). Note that based on the discussion, the ability to call Fiber::suspend() inside tick function may become forbidden in PHP 8.2+. But if the bug gets fixed, you can move register_tick_function() line to the top of the class, and this simple multithreading class in pure PHP code will work like a charm.
https://github.com/php/php-src/issues/8960

<?php

declare(ticks=1);

class
Thread {
protected static
$names = [];
protected static
$fibers = [];
protected static
$params = [];

public static function
register(string|int $name, callable $callback, array $params)
{
self::$names[] = $name;
self::$fibers[] = new Fiber($callback);
self::$params[] = $params;
}

public static function
run() {
$output = [];

while (
self::$fibers) {
foreach (
self::$fibers as $i => $fiber) {
try {
if (!
$fiber->isStarted()) {
// Register a new tick function for scheduling this fiber
register_tick_function('Thread::scheduler');
$fiber->start(...self::$params[$i]);
} elseif (
$fiber->isTerminated()) {
$output[self::$names[$i]] = $fiber->getReturn();
unset(
self::$fibers[$i]);
} elseif (
$fiber->isSuspended()) {
$fiber->resume();
}
} catch (
Throwable $e) {
$output[self::$names[$i]] = $e;
}
}
}

return
$output;
}

public static function
scheduler () {
if(
Fiber::getCurrent() === null) {
return;
}

// running Fiber::suspend() in this if condition will prevent an infinite loop!
if(count(self::$fibers) > 1)
{
Fiber::suspend();
}
}
}

?>

And here is an example code on how to use above Thread class:

<?php

// defining a non-blocking thread, so multiple calls will run in concurrent mode using above Thread class.
function thread (string $print, int $loop)
{
$i = $loop;
while (
$i--){
echo
$print;
}

return
"Thread '{$print}' finished after printing '{$print}' for {$loop} times!";
}

// registering 6 Threads (A, B, C, D, E, and F)
foreach(range('A', 'F') as $c) {
Thread::register($c, 'thread', [$c, rand(5, 20)]);
}

// run threads and wait until execution finishes
$outputs = Thread::run();

// print outputs
echo PHP_EOL, '-------------- RETURN VALUES --------------', PHP_EOL;
print_r($outputs);

?>

The output will be something like this (but probably different):

ABCDEFABCDEFABCDEFABCDEFABCDEFABCEFABFABFABEBEFBEFEFEFAABEABEBEFBEFFAAAAAA
-------------- RETURN VALUES --------------
Array
(
[D] => Thread 'D' finished after printing 'D' for 5 times!
[C] => Thread 'C' finished after printing 'C' for 6 times!
[E] => Thread 'E' finished after printing 'E' for 15 times!
[B] => Thread 'B' finished after printing 'B' for 15 times!
[F] => Thread 'F' finished after printing 'F' for 15 times!
[A] => Thread 'A' finished after printing 'A' for 18 times!
)
up
10
nesk at xakep dot ru
1 year ago
I think that in some cases it makes sense to convert a Fiber to a Generator (Coroutine) for convenience. In such cases, this code will be useful:

<?php
function fiber_to_coroutine(\Fiber $fiber): \Generator
{
$index = -1; // Note: Pre-increment is faster than post-increment.
$value = null;

// Allow an already running fiber.
if (!$fiber->isStarted()) {
$value = yield ++$index => $fiber->start();
}

// A Fiber without suspends should return the result immediately.
if (!$fiber->isTerminated()) {
while (
true) {
$value = $fiber->resume($value);

// The last call to "resume()" moves the execution of the
// Fiber to the "return" stmt.
//
// So the "yield" is not needed. Skip this step and return
// the result.
if ($fiber->isTerminated()) {
break;
}

$value = yield ++$index => $value;
}
}

return
$fiber->getReturn();
}
?>
up
21
maxpanchnko at gmail dot com
2 years ago
One of examples, how to make multi_curl faster twice (pseudocode) using Fibers:

<?php

$curlHandles
= [];
$urls = [
'https://example.com/1',
'https://example.com/2',
...
'https://example.com/1000',
];
$mh = curl_multi_init();
$mh_fiber = curl_multi_init();

$halfOfList = floor(count($urls) / 2);
foreach (
$urls as $index => $url) {
$ch = curl_init($url);
$curlHandles[] = $ch;

// half of urls will be run in background in fiber
$index > $halfOfList ? curl_multi_add_handle($mh_fiber, $ch) : curl_multi_add_handle($mh, $ch);
}

$fiber = new Fiber(function (CurlMultiHandle $mh) {
$still_running = null;
do {
curl_multi_exec($mh, $still_running);
Fiber::suspend();
} while (
$still_running);
});

// run curl multi exec in background while fiber is in suspend status
$fiber->start($mh_fiber);

$still_running = null;
do {
$status = curl_multi_exec($mh, $still_running);
} while (
$still_running);

do {
/**
* at this moment curl in fiber already finished (maybe)
* so we must refresh $still_running variable with one more cycle "do while" in fiber
**/
$status_fiber = $fiber->resume();
} while (!
$fiber->isTerminated());

foreach (
$curlHandles as $index => $ch) {
$index > $halfOfList ? curl_multi_remove_handle($mh_fiber, $ch) : curl_multi_remove_handle($mh, $ch);
}
curl_multi_close($mh);
curl_multi_close($mh_fiber);
?>
up
5
newuser
2 years ago
Example of the same functionality showing what is the difference between Fiber and Generator
<?php
$gener
= (function () use (&$gener): Generator {
$userfunc = function () use (&$gener) : Generator {
register_shutdown_function(function () use (&$gener) {
$gener->send('test');
});
return yield
'test';
};
$parm = yield from $userfunc();
echo
"Value used to resume fiber: ", $parm, PHP_EOL;
})();

$res = $gener->current();
echo
"Value from fiber suspending: ", $res, PHP_EOL;
?>
<?php
$fiber
= new Fiber(function () use (&$fiber) : void {
$userfunc = function () use (&$fiber) : string {
register_shutdown_function(function () use (&$fiber) {
$fiber->resume('test');
});
return
Fiber::suspend('fiber');
};
$parm = $userfunc();
echo
"Value used to resume fiber: ", $parm, PHP_EOL;
});

$res = $fiber->start();
echo
"Value from fiber suspending: ", $res, PHP_EOL;
?>
up
1
nikiDOTamministratoreATgmail at no dot spam
2 months ago
TL;DR

The Thread class from Ali Madabi above has been eventually deprecated by the linked issue as relaying on tick functions for preemptive multi-threading simulation has been deemed "bad practice". Better ways were suggested for achieving some sort of multi-threading, such as: Revolt and AMP.

https://github.com/php/php-src/issues/8960#issuecomment-1184249445
up
0
fibersare at cool dot com
2 days ago
From my observation you will not get any parallel benefit from Fibers unless you `Fiber::suspend()` after some kind of system or server call. In other words, if you were to `Fiber::suspend()` within the function passed to `new Fiber` before `$t = microtime(true)`, as opposed to after it, the code below would take one thousand seconds, instead of just over one second. Also, note that main thread code will not run in parallel unless all Fibers are started before any of the Fibers are resumed.

<?php
// 1000 Fibers that take one second individually can take about one second total along with the main thread in parallel
$entireExecutionStartTime = microtime(true);
function
createTimeoutFibers(int $count = 1, float $milliseconds = 1000):array{
$a = [];
$cF = function() use ($milliseconds):Fiber{
$f = new Fiber(function() use ($milliseconds){
$t = microtime(true); Fiber::suspend();
while((
$q = microtime(true)-$t) < $milliseconds/1000){} // wait
return $q;
});
$f->start();
return
$f;
};
for(
$i=0; $i<$count; $i++){
$a[] = $cF();
}
return
$a;
}
// create an array of 1000 Fibers that each wait one second
$a = createTimeoutFibers(1000); $fiberExecutionTimes = [];
// wait one second on the main thread - to receive a main thread benefit this must occur after all FiberInstance->start()s and before any FiberInstance->resume()s
$m = microtime(true);
while(
microtime(true)-$m < 1){}
foreach(
$a as $f){
while(!
$f->isTerminated()){
$f->resume();
}
$fiberExecutionTimes[] = $f->getReturn();
}
$entireExecutionTime = microtime(true)-$entireExecutionStartTime;
// easy to read output in $test
$test = '$fiberExecutionTimes = ['.join(', ', $fiberExecutionTimes).']; $entireExecutionTime = '.$entireExecutionTime.';';
?>
up
0
fibersare at cool dot com
2 days ago
From my observation you will not get any parallel benefit from Fibers unless you `Fiber::suspend()` after some kind of system or server call. In other words, if you were to `Fiber::suspend()` within the function passed to `new Fiber` before `$t = microtime(true)`, as opposed to after it, the code below would take one thousand seconds, instead of just over one second. Also, note that main thread code will not run in parallel unless all Fibers are started before any of the Fibers are resumed.

<?php
// 1000 Fibers that take one second individually can take about one second total along with the main thread in parallel
$entireExecutionStartTime = microtime(true);
function
createTimeoutFibers(int $count = 1, float $milliseconds = 1000):array{
$a = [];
$cF = function() use ($milliseconds):Fiber{
$f = new Fiber(function() use ($milliseconds){
$t = microtime(true); Fiber::suspend();
while((
$q = microtime(true)-$t) < $milliseconds/1000){} // wait one second
return $q;
});
$f->start();
return
$f;
};
for(
$i=0; $i<$count; $i++){
$a[] = $cF();
}
return
$a;
}
// create an array of 1000 Fibers that each wait one second
$a = createTimeoutFibers(1000); $fiberExecutionTimes = [];
// wait one second on the main thread - to receive a main thread benefit this must occur after all FiberInstance->start()s and before any FiberInstance->resume()s
$m = microtime(true);
while(
microtime(true)-$m < 1){}
foreach(
$a as $f){
while(!
$f->isTerminated()){
$f->resume();
}
$fiberExecutionTimes[] = $f->getReturn();
}
$entireExecutionTime = microtime(true)-$entireExecutionStartTime;
// easy to read output in $test
$test = '$fiberExecutionTimes = ['.join(', ', $fiberExecutionTimes).']; $entireExecutionTime = '.$entireExecutionTime.';';
?>
To Top