imagefilter

The documentation misses the exact meaning and valid ranges of the arguments for ImageFilter(). According to the 5.2.0 sources the arguments are:IMG_FILTER_BRIGHTNESS-255 = min brightness, 0 = no change, +255 = max brightnessIMG_FILTER_CONTRAST-100 = max contrast, 0 = no change, +100 = min contrast (note the direction!)IMG_FILTER_COLORIZEAdds (subtracts) specified RGB values to each pixel. The valid range for each color is -255...+255, not 0...255. The correct order is red, green, blue.-255 = min, 0 = no change, +255 = maxThis has not much to do with IMG_FILTER_GRAYSCALE.IMG_FILTER_SMOOTHApplies a 9-cell convolution matrix where center pixel has the weight arg1 and others weight of 1.0. The result is normalized by dividing the sum with arg1 + 8.0 (sum of the matrix).any float is accepted, large value (in practice: 2048 or more) = no changeImageFilter seem to return false if the argument(s) are out of range for the chosen filter.

I needed an especially strong blur effect today and had a hard time achieving adequate results with the built-in IMG_FILTER_GAUSSIAN_BLUR filter. In order to achieve the strength of the blur I required I had to repeat the filter up to  100 times, which took way too long to be acceptable.After a bit of searching, I found this answer to be quite a good solution to this problem: http://stackoverflow.com/a/20264482Based on that technique, I wrote the following generic function to achieve a very strong blur in a reasonable amount of processing:<?php /** * Strong Blur * * @param resource $gdImageResource  * @param int $blurFactor optional  *  This is the strength of the blur *  0 = no blur, 3 = default, anything over 5 is extremely blurred * @return GD image resource * @author Martijn Frazer, idea based on http://stackoverflow.com/a/20264482 */function blur($gdImageResource, $blurFactor = 3){  // blurFactor has to be an integer  $blurFactor = round($blurFactor);    $originalWidth = imagesx($gdImageResource);  $originalHeight = imagesy($gdImageResource);  $smallestWidth = ceil($originalWidth * pow(0.5, $blurFactor));  $smallestHeight = ceil($originalHeight * pow(0.5, $blurFactor));  // for the first run, the previous image is the original input  $prevImage = $gdImageResource;  $prevWidth = $originalWidth;  $prevHeight = $originalHeight;  // scale way down and gradually scale back up, blurring all the way  for($i = 0; $i < $blurFactor; $i += 1)  {        // determine dimensions of next image    $nextWidth = $smallestWidth * pow(2, $i);    $nextHeight = $smallestHeight * pow(2, $i);    // resize previous image to next size    $nextImage = imagecreatetruecolor($nextWidth, $nextHeight);    imagecopyresized($nextImage, $prevImage, 0, 0, 0, 0,       $nextWidth, $nextHeight, $prevWidth, $prevHeight);    // apply blur filter    imagefilter($nextImage, IMG_FILTER_GAUSSIAN_BLUR);    // now the new image becomes the previous image for the next step    $prevImage = $nextImage;    $prevWidth = $nextWidth;      $prevHeight = $nextHeight;  }  // scale back to original size and blur one more time  imagecopyresized($gdImageResource, $nextImage,     0, 0, 0, 0, $originalWidth, $originalHeight, $nextWidth, $nextHeight);  imagefilter($gdImageResource, IMG_FILTER_GAUSSIAN_BLUR);  // clean up  imagedestroy($prevImage);  // return result  return $gdImageResource;}?>

Here is an alternative to IMG_FILTER_COLORIZE filter, but taking the alpha parameter of each pixel in account.

<?php
function rgba_colorize($img, $color)
{
    imagesavealpha($img, true);
    imagealphablending($img, true);

    $img_x = imagesx($img);
    $img_y = imagesy($img);
    for ($x = 0; $x < $img_x; ++$x)
    {
        for ($y = 0; $y < $img_y; ++$y)
        {
            $rgba = imagecolorsforindex($img, imagecolorat($img, $x, $y));
            $color_alpha = imagecolorallocatealpha($img, $color[0], $color[1], $color[2], $rgba['alpha']);
            imagesetpixel($img, $x, $y, $color_alpha);
            imagecolordeallocate($img, $color_alpha);
        }
    }
}
?>

Function to change the transparency of a png image on the fly. Works only with PNG, and with a browser supporting alpha channel.The function stretches the opacity-range of the image, so that the most opaque pixel(s) will be set to the given opacity. (Other opacity values in pixels are modified accordingly.)Returns success or failure.<?phpfunction filter_opacity( &$img, $opacity ) //params: image resource id, opacity in percentage (eg. 80)        {            if( !isset( $opacity ) )                { return false; }            $opacity /= 100;                        //get image width and height            $w = imagesx( $img );            $h = imagesy( $img );                        //turn alpha blending off            imagealphablending( $img, false );                        //find the most opaque pixel in the image (the one with the smallest alpha value)            $minalpha = 127;            for( $x = 0; $x < $w; $x++ )                for( $y = 0; $y < $h; $y++ )                    {                        $alpha = ( imagecolorat( $img, $x, $y ) >> 24 ) & 0xFF;                        if( $alpha < $minalpha )                            { $minalpha = $alpha; }                    }                        //loop through image pixels and modify alpha for each            for( $x = 0; $x < $w; $x++ )                {                    for( $y = 0; $y < $h; $y++ )                        {                            //get current alpha value (represents the TANSPARENCY!)                            $colorxy = imagecolorat( $img, $x, $y );                            $alpha = ( $colorxy >> 24 ) & 0xFF;                            //calculate new alpha                            if( $minalpha !== 127 )                                { $alpha = 127 + 127 * $opacity * ( $alpha - 127 ) / ( 127 - $minalpha ); }                            else                                { $alpha += 127 * $opacity; }                            //get the color index with new alpha                            $alphacolorxy = imagecolorallocatealpha( $img, ( $colorxy >> 16 ) & 0xFF, ( $colorxy >> 8 ) & 0xFF, $colorxy & 0xFF, $alpha );                            //set pixel with the new color + opacity                            if( !imagesetpixel( $img, $x, $y, $alphacolorxy ) )                                { return false; }                        }                }            return true;        }?>Example for use: <?php  $image = imagecreatefrompng( "img.png" );  filter_opacity( $image, 75 );  header( "content-type: image/png" );  imagepng( $image );  imagedestroy( $image );?>

Here's a page that shows the different filters in actionhttp://www.phpied.com/image-fun-with-php-part-2/Also shows some quick ways to do sepia.

a function to create nice vignette effect:<?phpfunction vignette($im){    global $width, $height;        $width = imagesx($im);    $height = imagesy($im);    function effect($x, $y, &$rgb){        global $width, $height;                        $sharp = 0.4; // 0 - 10 small is sharpnes,          $level = 0.7; // 0 - 1 small is brighter        $l = sin(M_PI / $width * $x) * sin(M_PI / $height * $y);        $l = pow($l, $sharp);                $l = 1 - $level * (1 - $l);                $rgb['red'] *= $l;        $rgb['green'] *= $l;        $rgb['blue'] *= $l;    }    for($x = 0; $x < imagesx($im); ++$x){        for($y = 0; $y < imagesy($im); ++$y){               $index = imagecolorat($im, $x, $y);            $rgb = imagecolorsforindex($im, $index);            effect($x, $y, $rgb);            $color = imagecolorallocate($im, $rgb['red'], $rgb['green'], $rgb['blue']);            imagesetpixel($im, $x, $y, $color);           }    }    return(true);}$im = imagecreatefromjpeg('cars7_134.jpg');if($im and vignette($im)){    header('Content-Type: image/jpeg');    imagejpeg($im);    imagedestroy($im);}else{    echo 'Vignette failed.';}?>

From what i have been able to find from this function, it accepts the following arguments:        IMG_FILTER_NEGATE        IMG_FILTER_GRAYSCALE        IMG_FILTER_EDGEDETECT        IMG_FILTER_GAUSSIAN_BLUR        IMG_FILTER_SELECTIVE_BLUR        IMG_FILTER_EMBOSS        IMG_FILTER_MEAN_REMOVALThe following arguments need one or more arguments.        IMG_FILTER_SMOOTH, -1924.124        IMG_FILTER_COLORIZE, -127.12, -127.98, 127        IMG_FILTER_CONTRAST, -90        IMG_FILTER_BRIGHTNESS, 98        I haven't tested them all, the names speak for themselves.

filtertype is an integer. So if you want to use it as a variable and need to use, e.g. preg_match function you can do it in this way:<?php    $filter = IMG_FILTER_BRIGHTNESS;    if( preg_match( '/^[0-9]{1,2}$/', $filter ) )    {        //Do something    }?>The order of the filtertypes in this manual determines the number of each filter, from 0 to 11. E.g. IMG_FILTER_NEGATE=0.

Simple pixelate function, just in case you are < 5.3<?phpfunction pixelate(&$image, $pixelsize){    $maxX = imagesx($image);    $maxY = imagesy($image);    $rad=floor($pixelsize/2);    for($x=$rad;$x<$maxX;$x+=$pixelsize)        for($y=$rad;$y<$maxY;$y+=$pixelsize){            $color = imagecolorat($image, $x, $y);            imagefilledrectangle ($image, $x-$rad, $y-$rad, $x+$pixelsize-1, $y+$pixelsize-1,$color);        }}?>

If you're looking for fast sepia effect that can be used for on-the-fly thumbnails generation you can't use sophisticated functions. The faster and much better way than described by webmaster at qudi dot de in the note from 31-Jan-2006 is applying colorize filter AFTER grayscale.<?php(...)imagefilter($yourimage, IMG_FILTER_GRAYSCALE); imagefilter($yourimage, IMG_FILTER_COLORIZE, 90, 60, 40); (...)?>I used (90,60,40) for my sepia after couple of tests, however, if you need darker or lighter just check what suits you best.

For people looking to apply a 'multiply' effect on images like the one in Photoshop (generally b&w ones), you can achieve it with the IMG_FILTER_COLORIZE filter.<?phpfunction multiplyColor(&$im, $color = array(255, 0, 0)){   //get opposite color   $opposite = array(255 - $color[0], 255 - $color[1], 255 - $color[2]);   //now we subtract the opposite color from the image   imagefilter($im, IMG_FILTER_COLORIZE, -$opposite[0], -$opposite[1], -$opposite[2]);}?>

a function to make all colors gray except the only one
i made it myself so the code is note so beautiful )

<?php
function imagecolorfilter($im){
    
    $height = imagesy($im);
    $width = imagesx($im);
    for($x=0; $x<$width; $x++){
        for($y=0; $y<$height; $y++){
            $rgb = ImageColorAt($im, $x, $y);
            $r = ($rgb >> 16) & 0xFF;
            $g = ($rgb >> 8) & 0xFF;
            $b = $rgb & 0xFF;
            $c=($r+$g+$b)/3;
            
//if($g<$r || $g<$b+20){$r=$c;$g=$c; $b=$c;}//leaves only green 
//if($b<$r || $b<$g){$r=$c;$g=$c; $b=$c;}//only blue
if($r<$g+30 || $r<$b){$r=$c;$g=$c; $b=$c;}//only red
//if($r<$g-1 || $r>$g+60 || $b>$g-50){$r=$c;$g=$c; $b=$c;}//only yellow
            
            
imagesetpixel($im, $x, $y,imagecolorallocate($im, $r,$g,$b));
        }
    }
}

header ("Content-type: image/jpeg");
$im = imagecreatefromjpeg("image.jpg");
imagecolorfilter($im);
imagejpeg($im);
?>

Examples using imagefilter():<?php$im = imagecreatefrompng('dave.png');if ($im && imagefilter($im, IMG_FILTER_GRAYSCALE)) {    echo 'Image converted to grayscale.';    imagepng($im, 'dave.png');} else {    echo 'Conversion to grayscale failed.';}imagedestroy($im);?>/////////////////////////////<?php$im = imagecreatefrompng('sean.png');if ($im && imagefilter($im, IMG_FILTER_BRIGHTNESS, 20)) {    echo 'Image brightness changed.';    imagepng($im, 'sean.png');} else {    echo 'Image brightness change failed.';}imagedestroy($im);?>/////////////////////////////<?php$im = imagecreatefrompng('philip.png');/* R, G, B, so 0, 255, 0 is green */if ($im && imagefilter($im, IMG_FILTER_COLORIZE, 0, 255, 0)) {    echo 'Image successfully shaded green.';    imagepng($im, 'philip.png');} else {    echo 'Green shading failed.';}imagedestroy($im);?>

Note: applying IMG_FILTER_EMBOSS to text and using in a customization to the CAPTCHA image script in phpBB or a project of your own is a very good way to stop OCR-ing bots from getting through. Embossed serif fonts are fairly easy for the human eye to understand but to an OCR script it is extremely difficult because it seems to give it the illusion of 3D. If you only allocate 2 or 3 colours in the image, it uses the background colour alot in the embossed text, which greatly contributes to this.I made my own custom CAPTCHA script to stop phpBB post spam for a client site I was developing and I have gone from getting 2-3 new spam users created every day to zero.Anything with the source code freely available out there right now is possible to be defeated by spammers once one of them stars sharing code with the other spammers, but if you run something at least someone custom, their bots will pass you over.

This will only work if you have php5. For php4, you'll have to use the sepia function set webmaster at qudi dot de suggested.

This routine was just what I was looking for, I wanted web admin users to be able to recolour their uploaded photos (to go with a news item) either a blue tint or sepia to match the appearance of other colours used on the website. Using a form with a select box containing the RGB values, I can give them the option of either of the two tints or no colourization at all, plus resize their images to the viewing size and a thumbnail image on the fly without having to use any other image editing software.

for a quick, ok-looking, sepia-effect (also in php4) I just use this little fellow, since a real implementation of sepia was just way too slow.function pseudosepia(&$im,$percent){      $sx=imagesx($im);      $sy=imagesy($im);      $filter=imagecreatetruecolor($sx,$sy);      $c=imagecolorallocate($filter,100,50,50);      imagefilledrectangle($filter,0,0,$sx,$sy,$c);      imagecopymerge($im,$filter,0,0,0,0,$sx,$sy,$percent);}

Searching for a way to easily change the color of the image, I tried IMG_FILTER_COLORIZE. I was unable to get the quality results I wanted. It turns out PHP's Colorize is the equivalent of Photoshop's "Linear Dodge" layer filter. Hue adjustments have always worked well for me, so I figured I could try with PHP.This function is kind of slow on larger images, but on small images like what I'm using it for, the difference is trivial.The script calculates the ratio or red, to green, to blue in the color provided, then scales the image appropriately... unfortunately, it does it pixel by pixel.Here's a demo and comparison of this function, to photoshop's hue function, to PHP's colorize. http://img146.imageshack.us/img146/3167/imagefilterhuedemo.png<?phpfunction imagefilterhue($im,$r,$g,$b){    $rgb = $r+$g+$b;    $col = array($r/$rgb,$b/$rgb,$g/$rgb);    $height = imagesy($im);    $width = imagesx($im);    for($x=0; $x<$width; $x++){        for($y=0; $y<$height; $y++){            $rgb = ImageColorAt($im, $x, $y);            $r = ($rgb >> 16) & 0xFF;            $g = ($rgb >> 8) & 0xFF;            $b = $rgb & 0xFF;            $newR = $r*$col[0] + $g*$col[1] + $b*$col[2];            $newG = $r*$col[2] + $g*$col[0] + $b*$col[1];            $newB = $r*$col[1] + $g*$col[2] + $b*$col[0];            imagesetpixel($im, $x, $y,imagecolorallocate($im, $newR, $newG, $newB));        }    }}header ("Content-type: image/jpeg");$im = imagecreatefromjpeg("test.jpg");// Usage: Just as imagefilter(), except with no filtertype.// imagefilterhue(resource $image, int $red, int $green , int $blue)imagefilterhue($im,2,70,188);// The equivalent with colorize, as tested in demo image: imagefilter($im, IMG_FILTER_COLORIZE, 2, 70, 188);imagejpeg($im);?>

http://www.hudzilla.org/phpbook/read.php/11_2_15for more detailed info, and some <i>arg</i> guidelines.

PHP Sepia Effect  $myImage = imagecreatefromjpeg($f);  imagefilter($myImage,IMG_FILTER_GRAYSCALE);  imagefilter($myImage,IMG_FILTER_BRIGHTNESS,-30);  imagefilter($myImage,IMG_FILTER_COLORIZE, 90, 55, 30);    header("Content-type: image/jpeg");  imagejpeg($myImage );  imagejpeg($myImage,$f);  imagedestroy( $myImage );

A colorize algorithm wich preserves color luminosity (i.e black will output black, and white will output white).This works in PHP4 and is great for customizing interfaces dinamically.<?phpfunction colorize($img_src,$img_dest, $r, $g, $b) {if(!$im = imagecreatefromgif($img_src))  return "Could not use image $img_src";     //We will create a monochromatic palette based on//the input color//which will go from black to white//Input color luminosity: this is equivalent to the //position of the input color in the monochromatic//palette$lum_inp=round(255*($r+$g+$b)/765); //765=255*3//We fill the palette entry with the input color at its //corresponding position$pal[$lum_inp]['r']=$r;$pal[$lum_inp]['g']=$g;$pal[$lum_inp]['b']=$b;//Now we complete the palette, first we'll do it to//the black,and then to the white.//FROM input to black//===================//how many colors between black and input$steps_to_black=$lum_inp;        //The step size for each componentif($steps_to_black) { $step_size_red=$r/$steps_to_black;     $step_size_green=$g/$steps_to_black;     $step_size_blue=$b/$steps_to_black;     }for($i=$steps_to_black;$i>=0;$i--) { $pal[$steps_to_black-$i]['r']=$r-round($step_size_red*$i); $pal[$steps_to_black-$i]['g']=$g-round($step_size_green*$i); $pal[$steps_to_black-$i]['b']=$b-round($step_size_blue*$i); }//From input to white://===================//how many colors between input and white$steps_to_white=255-$lum_inp;if($steps_to_white)  {  $step_size_red=(255-$r)/$steps_to_white;      $step_size_green=(255-$g)/$steps_to_white;      $step_size_blue=(255-$b)/$steps_to_white;      } else  $step_size_red=$step_size_green=$step_size_blue=0; //The step size for each component for($i=($lum_inp+1);$i<=255;$i++)  {  $pal[$i]['r']=$r + round($step_size_red*($i-$lum_inp));  $pal[$i]['g']=$g + round($step_size_green*($i-$lum_inp));  $pal[$i]['b']=$b + round($step_size_blue*($i-$lum_inp));  }//--- End of palette creation//Now,let's change the original palette into the one we//createdfor($c = 0; $c < $palette_size; $c++) {  $col = imagecolorsforindex($im, $c);           $lum_src=round(255*($col['red']+$col['green']                +$col['blue'])/765); $col_out=$pal[$lum_src]; imagecolorset($im, $c, $col_out['r'],                                 $col_out['g'],                                $col_out['b']); } //save the image file imagepng($im,$img_dest); imagedestroy($im);}//end function colorize?>

I played with IMG_FILTER_SMOOTH and tried some negativevalues.-1 to -7: looks like a mix of smoothness and edgedetect-8: image seems to be completely broken-9 and lower: kind of sharpening effect (-9 sharper than -10)I think the sharpening effect in particular could be useful.

IMG_FILTER_COLORIZE doesn't seem to work on palette image, here's a way to achieve same result with palette image:<?php//$color is an array containing rvb infos (ie: array(255,80,0))function paletteColorize($imgResource,array $color){    $nbColors = imagecolorstotal($imgResource);    for($i=0; $i<$nbColors; $i++){        $c = array_values(imagecolorsforindex($imgRes,$i));        for($y=0;$y<3;$y++)            $c[$y] = max(0,min(255,$c[$y]+$color[$y]));        imagecolorset($imgResource,$i,$c[0],$c[1],$c[2]);    }}?>Here's also a function that work on both truecolor and palette images that try to do something similar to greyscale with a given color<?phpfunction colorScale($imgRes,array $color){        imagefilter($imgRes,IMG_FILTER_GRAYSCALE);        $color = self::_read_color($color);        $luminance=($color[0]+$color[1]+$color[2])/3; // average luminance added by the color        $brightnessCorrection = $luminance/3; // quantity of brightness to correct for each channel        if( $luminance < 127 ){            $brightnessCorrection -= 127/3; // color is dark so we have to negate the brightness correction         }        if(! imageistruecolor($imgRes) ){            $nbColors = imagecolorstotal($imgRes);            for($i=0; $i<$nbColors; $i++){                $c = array_values(imgagecolorsforindex($imgRes,$i));                for($y=0;$y<3;$y++){                    $c[$y] = max(0, min(255, $c[$y] + ($color[$y]-$luminance) + $brightnessCorrection) ); // parentheses just for better comprehension                }                imagecolorset($omgRes,$i,$c[0],$c[1],$c[2]);            }        }else{ // much easier with truecolor            imagefilter($imgRes, IMG_FILTER_COLORIZE, $color[0]-$luminance, $color[1]-$luminance, $color[2]-$luminance);            imagefilter($imgRes, IMG_FILTER_BRIGHTNESS, $brightnessCorrection);        }}?>with hope that someone will find this useful

// With transparent PNG file you can colorize the "positive" items and stand the transparent has it is - Beta code<?phpheader('Content-Type: image/png');$im = imagecreatefrompng('image.png');$width = imagesx($im);$height = imagesy($im);$imn = imagecreatetruecolor($width, $height);imagealphablending($imn,false);$col=imagecolorallocatealpha($imn,255,255,255,127);imagesavealpha($imn,true);imagefilledrectangle($imn,0,0,$width,$height,$col);imagealphablending($imn,true);imagecopy($imn, $im, 0, 0, 0, 0, $width, $height);imagefilter($imn, IMG_FILTER_NEGATE);// FOR A TRANSPARENT PNG FILE WITH SOMETHING INSIDE, YOU CAN CHANGE THE COLOR HERE: I HAVE RGB: 0, 255, 0imagefilter($imn, IMG_FILTER_COLORIZE, 0, 255, 0);imagepng($imn);imagedestroy($imn);?>