(PHP 4, PHP 5, PHP 7, PHP 8)
touch — Modifie la date de modification et de dernier accès d'un fichier
Tente de forcer la date de modification du fichier
désigné par le paramètre filename à la date
spécifiée par le paramètre mtime.
Notez bien que la date de dernier accès est modifiée, quel que
soit le nombre de paramètres.
Si le fichier n'existe pas, PHP tentera de le créer.
filenameLe nom du fichier à créer.
mtime
La date de création. Si mtime est omis,
c'est l'heure courante time() qui est utilisée.
atime
Si non null, l'heure d'accès au fichier fourni sera défini à la valeur
du paramètre atime. Sinon, elle sera définie à
la valeur passée au paramètre mtime.
Si tous les deux sont null, l'heure courante du système sera utilisée.
| Version | Description |
|---|---|
| 8.0.0 |
mtime et atime
sont désormais nullable.
|
Exemple #1 Exemple avec touch()
<?php
if (touch($FileName)) {
echo "La date de modification de $FileName a été modifiée à la date courante";
} else {
echo "Désolé, il est impossible de changer la date de modification de $FileName";
}
?>
Exemple #2 Exemple avec touch() en utilisant le paramètre
mtime
<?php
/*
* Ceci est la date et l'heure du dernier accès, nous y ajoutons 1 heure
* dans le passé.
*/
$time = time() - 3600;
/* Touchons le fichier ! */
if (!touch('some_file.txt', $time)) {
echo 'Whoops, une erreur est survenue...';
} else {
echo 'L\'appel à la fonction touch() a réussi';
}
?>Note:
Notez que la précision temporelle peut varier selon le système de fichiers utilisé.
Note that when PHP is called by f.e. apache or nginx instead of directly from the command line, touch() will not prefix the location of the invoking script, so the supplied filename must contain an absolute path.
With script started from /home/user/www, this will not touch "/home/user/www/somefile":
<?php
touch( 'somefile' );
?>
But this will:
<?php
touch( __DIR__ . '/somefile' );
?>Update the access time without updating the modified time:
Unix command: touch -a filename
PHP: touch(filename, date('U', filemtime(filename)), time())I've been trying to set a filemtime into the future with touch() on PHP5.
It seems touch $time has a future limit around 1000000 seconds (11 days or so). Beyond this point it reverts to a previous $time.
It doesn't make much sense but I could save you hours of time.
$time = time()+1500000;
touch($cachedfile,$time);At least on Linux, touch will not change the time on a symlink itself, but on the file/directory it points to. The only way to work around this is to unlink the symlink, then recreate it.
It took a bit of searching to discover this. The OS itself provides no way to do it. Many people wondered why anyone would want to do this. I use symlinks inside a web tree to point to files outside the web tree. After a certain length of time has passed, I want the symlinks to die, so the files cannot be successfully hotlinked.To touch a file without being owner, it is much easier:
<?php
function touchFile($file) {
fclose(fopen($file, 'a'));
}
?>I has passed a small test to check which function is faster to create a new file.
file_put_contents vs touch
<?php
for($i = 0; $i < 100; $i++)
{
file_put_contents('dir/file'.$i, '');
}
?>
Average time: 0,1145s
<?php
for($i = 0; $i < 100; $i++)
{
touch('dir/file'.$i);
}
?>
Average time: 0,2322s
So, file_put_contents is faster than touch, about two times.I needed to use this to touch the /etc/cron.d directory when I updated some files in there. I know the docs say this isn't necessary, but I'm finding that i need to do it in order form my changes to be picked up quickly.
I ran into the permissions error as well and I found that using chmod 777 /etc/cron.d does the trick.
So, you should be able to use the PHP touch function on a directory that has open write access.
Of course, this isn't the most secure approach, but in our application it's not a big deal for that folder to not be super secure.Actually, Glen is right, PHP won't touch if it is not the current owner of the file, even if the directory and files are writeable by the PHP user.If you're going to go around deleting (unlinking) files
that you don't own just in order to change the modification
time on the file, you darn well better chown() the file
back to it's original ownership after you are done and
chmod() it back to it's correct permissions. Otherwise
you will almost certainly break things. Additionally the
code listed for touch()ing a file you don't own should
set the file creation time back to it's original time if
what is wanted is to just change the modification time.
Also, the code listed will break things if there is an i/o
error such as disk full or too many files in the directory.
Here's how the code SHOULD be written:
Create the new file FIRST, rather than last, with a different
name such as $file.tmp.
Read the ownership, permissions, and creation time of the old file.
Set permissions and creation time of the new file the same as the old.
Rename the new file to the name of the old.
chown() the new file to the user that owned the file it's replacing.
Please be careful adding to the documentation if you've
never taken programming 101.Only way to change modification date in catalogue is to create file in via touch() and dalete it with unlink():
<?php
$dir = 'temp';
$files1 = scandir($dir);
$files1 = array_slice($files1, 2);
foreach ($files1 as $key => $val)
{
if (!is_dir($val)) continue;
if (!touch($val))
{
touch($val . "/plik.txt");
unlink($val . "/plik.txt");
}
}
?>Note: the script to touch a file you don't own will change it's owner so ensure permissions are correct or you could lose access to itNeat little script that will give you a list of all modified files in a certain folder after a certain date:
$filelist = Array();
$filelist = list_dir("d:\\my_folder");
for($i=0;$i<count($filelist);$i++){
$test = Array();
$test = explode("/",date("m/d/Y",filemtime($filelist[$i])));
//example of files that are later then
//06/17/2002
if(($test[2] > 2001) && ($test[1] > 16) && ($test[0] > 5)){
echo $filelist[$i]."\r\n";
}
clearstatcache();
}
function list_dir($dn){
if($dn[strlen($dn)-1] != '\\') $dn.='\\';
static $ra = array();
$handle = opendir($dn);
while($fn = readdir($handle)){
if($fn == '.' || $fn == '..') continue;
if(is_dir($dn.$fn)) list_dir($dn.$fn.'\\');
else $ra[] = $dn.$fn;
}
closedir($handle);
return $ra;
}I have found out that setting a negative *mtime* deletes the file. The following code always deletes the file at $path while $touch returns true.
<?php
$path = '/folder/file';
$timestamp = -1;
$touch = touch($path, $timestamp);
?>
Running PHP 7.4.5Here's a little workaround that allows the PHP user to touch a file it doesn't own:
<?php
$target_file = "/path/to/file/filename.txt"; //system filepath to your file
$file_content = implode("",file($target_file));
@unlink($target_file);
if($savetofile = fopen($target_file, "w")) {
fputs($savetofile, $file_content);
fclose($savetofile);
}
$new_date = strtotime("23 April 2005"); // set the required date timestamp here
touch($target_file,$new_date);
?>
Of course, PHP needs to have write access to the folder containing the file you want to touch, but that should be easy to arrange.A better explanation:
For file $file and UNIX time stored in vars $access and $modified
- change only access time
\touch($file, \filemtime($file), $access);
- change only modified time
\touch($file, $modified, \fileatime($file));
- change both access and modified time
\touch($file, $modified, $access);
Seeing the results:
//use a session cookie stored in a custom folder
$file = '/var/www/test_com/session/sess_qfn587cudfpgsijm1bs4d81s75';
echo 'stats for sess_qfn587cudfpgsijm1bs4d81s75<br/>';
\clearstatcache();
echo 'access: '.\date("Y-m-d H:i:s", \fileatime($file)).'<br/>';
echo 'modified: '.\date("Y-m-d H:i:s", \filemtime($file)).'<br/>';
echo 'change access to now, modified +1 hour<br/>';
\touch($x, \filemtime($file)+3600, time());
\clearstatcache();
echo 'access: '.\date("Y-m-d H:i:s", \fileatime($file)).'<br/>';
echo 'modified: '.\date("Y-m-d H:i:s", \filemtime($file)).'<br/>';
Notice the double call to clearstatcache()!In unix on the command-line, you can touch files you don't own - but like other comments on this page state - PHP's built in touch won't work.
I simple alternative (on unix):
<?php
function touch_it_good($filename)
{
exec("touch {$filename}");
}
?>Important info:
touch() used on a directory always returns FALSE and prints "Permission denied" on NTFS and FAT Filesystem (tested on winXP).An earlier comment referenced a code snippet that showed file_put_contents() was faster the touch for creating files. I re-ran the same tests on PHP 5.5.9 and this seems to no longer be the case.
<?php
$startTime = microtime(true);
for($i = 0; $i < 100000; $i++)
{
file_put_contents('dir/file'.$i, '');
unlink('dir/file'.$i);
}
echo "Time: ".(microtime(true)-$startTime)."\n"; // Time: 2.6902809143066
$startTime = microtime(true);
for($i = 0; $i < 100000; $i++)
{
touch('dir/file'.$i);
unlink('dir/file'.$i);
}
echo "Time: ".(microtime(true)-$startTime)."\n"; // Time: 2.3343770503998
?>