pg_query_params

(PHP 5 >= 5.1.0, PHP 7, PHP 8)

pg_query_params — Envia um comando ao servidor e aguarda o resultado, com a capacidade de passar parâmetros separadamente do texto do comando SQL

Descrição

pg_query_params(PgSql\Connection $connection = ?, string $query, array $params): PgSql\Result|false

Envia um comando ao servidor e aguarda o resultado, podendo passar parâmetros separadamente do texto do comando SQL.

pg_query_params() é como pg_query(), mas oferece funcionalidade adicional: os valores dos parâmetros podem ser especificados separadamente da string de comando propriamente dita. pg_query_params() é compatível apenas com conexões PostgreSQL 7.4 ou superior; falhará ao usar versões anteriores.

Se parâmetros forem usados, eles serão referidos na string query como $1, $2, etc. O mesmo parâmetro pode aparecer mais de uma vez na query; o mesmo valor será usado nesse caso. params especifica os valores reais dos parâmetros. Um valor null neste array significa que o parâmetro correspondente é SQL NULL.

A principal vantagem de pg_query_params() sobre pg_query() é que os valores dos parâmetros podem ser separados da string query, evitando assim a necessidade de tarefas tediosas e propensas a erros de escape. Ao contrário de pg_query(), pg_query_params() permite no máximo um comando SQL na string fornecida. (Pode haver ponto-e-vírgula, mas não mais do que um comando não vazio.)

Parâmetros

connection

Uma instância de PgSql\Connection. Quando o parâmetro connection não for especificado, a conexão padrão será usada. A conexão padrão é a última conexão feita por pg_connect() ou pg_pconnect().

Aviso

A partir do PHP 8.1.0, usar a conexão padrão tornou-se defasado.

query

A instrução SQL parametrizada. Deve conter apenas uma única instrução. (múltiplas instruções separadas por ponto e vírgula não são permitidas.) Se algum parâmetro for usado, ele será chamado de $1, $2, etc.

Os valores fornecidos pelo usuário devem sempre ser passados como parâmetros, não interpolados na string de consulta, onde formam possíveis vetores de ataque de injeção de SQL e introduzem bugs ao manipular dados contendo aspas. Se por algum motivo você não puder usar um parâmetro, certifique-se de que os valores interpolados foram escapados corretamente.

params

Um array de valores de parâmetros para substituir os espaços reservados $1, $2, etc. na string de consult original preparada. O número de elementos no array deve corresponder ao número de espaços reservados.

Valores destinados a campos bytea não são suportados como parâmetros. Use pg_escape_bytea() ou use as funções de objetos grandes.

Valor Retornado

Uma instância PgSql\Result em caso de sucesso, ou false em caso de falha.

Registro de Alterações

Versão	Descrição
8.1.0	Agora retorna uma instância de PgSql\Result; anteriormente, um resource era retornado.
8.1.0	O parâmetro `connection` agora espera uma instância de PgSql\Connection; anteriormente, um resource era esperado.

Exemplos

Exemplo #1 Usando pg_query_params()

<?php
// Conecta a um banco de dados chamado "mary"
$dbconn = pg_connect("dbname=mary");

// Encontre todas as lojas chamadas Joe's Widgets. Observe que não é necessário
// escapar "Joe's Widgets"
$result = pg_query_params($dbconn, 'SELECT * FROM shops WHERE name = $1', array("Joe's Widgets"));

// Compara com apenas o uso de pg_query
$str = pg_escape_string("Joe's Widgets");
$result = pg_query($dbconn, "SELECT * FROM shops WHERE name = '{$str}'");

?>

Veja Também

pg_query() - Executa uma consulta

Melhore Esta Página

Aprenda Como Melhorar Esta Página • Envie uma Solicitação de Modificação • Reporte um Problema

＋adicione uma nota

Notas Enviadas por Usuários (em inglês) 14 notes

down

victor dot engmark at terreactive dot ch ¶

13 years ago

You can't run multiple statements with pg_query_params, but you can still have transaction support without falling back to pg_query:

<?php
$connection = pg_connect("host=127.0.0.1 port=5432 dbname=foo user=bar password=baz");
pg_query($connection, 'DROP TABLE IF EXISTS example');
pg_query($connection, 'CREATE TABLE example (col char(1))');
pg_query($connection, 'INSERT INTO example (col) VALUES (\'a\')');
// 'SELECT col FROM example' in another session returns "a"
pg_query($connection, 'BEGIN');
pg_query_params($connection, 'UPDATE example SET col = $1', array('b'));
// 'SELECT col FROM example' in another session still returns "a"
pg_query_params($connection, 'UPDATE example SET col = $1', array('c'));
// 'SELECT col FROM example' in another session still returns "a"
pg_query($connection, 'COMMIT');
// 'SELECT col FROM example' in another session returns "c"
?>

down

php at richardneill dot org ¶

10 years ago

Debugging parameterised queries can be tedious, if you want to paste the query directly into PSQL. Here is a trick that helps:

<?php
$sql = "SELECT * from table WHERE col_a = $1 and col_b=$2 and col_c=$3";
$params = array (42, "a string", NULL);

$debug = preg_replace_callback( 
        '/\$(\d+)\b/',
        function($match) use ($params) { 
            $key=($match[1]-1); return ( is_null($params[$key])?'NULL':pg_escape_literal($params[$key]) ); 
        },
        $sql);

echo "$debug";
//prints:   SELECT * from table WHERE col_a = '42' and col_b='a string' and col_c=NULL
?>

This works correctly, except in the (unusual) case where we have a literal $N;  the regexp replaces it where it shouldn't.  For example:
<?php
//Both  ' ... $1 ... '   and  $1   get replaced; the former is wrong, the latter is right.
$sql = "SELECT 'Your bill is for $1' AS invoice WHERE 7 = $1";
$params = array(7);
//$debug:  SELECT 'Your bill is for $7' AS invoice WHERE 7 = '7'"
?>

down

ac at esilo dot com ¶

14 years ago

pg_query and pg_query_params can be combined into a single function.  This also removes the need to construct a parameter array for pg_query_params:



<?php

function my_query($conn, $query)

{

  if(func_num_args() == 2)

    return pg_query($conn, $query);



  $args = func_get_args();

  $params = array_splice($args, 2);

  return pg_query_params($conn, $query, $params);

}

?>



Usage:



<?php

/* non-parameterized example */

my_query($conn, "SELECT $val1 + $val2");



/* parameterized example */

my_query($conn, "SELECT $1 + $2", $val1, $val2);

?>

down

dt309 at f2s dot com ¶

18 years ago

If you need to provide multiple possible values for a field in a select query, then the following will help.

<?php
// Assume that $values[] is an array containing the values you are interested in.
$values = array(1, 4, 5, 8);

// To select a variable number of arguments using pg_query() you can use:
$valuelist = implode(', ', $values);
$query = "SELECT * FROM table1 WHERE col1 IN ($valuelist)";
$result = pg_query($query)
    or die(pg_last_error());

// You may therefore assume that the following will work.
$query = 'SELECT * FROM table1 WHERE col1 IN ($1)';
$result = pg_query_params($query, array($valuelist))
    or die(pg_last_error());
// Produces error message: 'ERROR: invalid input syntax for integer'
// It only works when a SINGLE value specified.

// Instead you must use the following approach:
$valuelist = '{' . implode(', ', $values . '}'
$query = 'SELECT * FROM table1 WHERE col1 = ANY ($1)';
$result = pg_query_params($query, array($valuelist));
?>

The error produced in this example is generated by PostGreSQL.

The last method works by creating a SQL array containing the desired values. 'IN (...)' and ' = ANY (...)' are equivalent, but ANY is for working with arrays, and IN is for working with simple lists.

down

jsnell at e-normous dot com ¶

17 years ago

When inserting into a pg column of type bool, you cannot supply a PHP type of bool.  You must instead use a string "t" or "f". PHP attempts to change boolean values supplied as parameters to strings, and then attempts to use a blank string for false.

Example of Failure:
pg_query_params('insert into table1 (bool_column) values ($1)', array(false));

Works:
pg_query_params('insert into lookup_permissions (system) values ($1)', array(false ? 't' : 'f'));

down

peter dot kehl+nospam at gmail dot com ¶

12 years ago

Third parameter $params of pg_query_params() ignores nay part of the string values after a zero byte character - PHP "\0" or chr(0). That may be a result of serialize().



See https://bugs.php.net/bug.php?id=63344

down

alec at smecher dot bc dot ca ¶

12 years ago

Note that due to your locale's number formatting settings, you may not be able to pass a numeric value in as a parameter and have it arrive in PostgreSQL still a number.

If your system locale uses "," as a decimal separator, the following will result in a database error:

pg_query_params($conn, 'SELECT $1::numeric', array(3.5));

For this to work, it's necessary to manually convert 3.5 to a string using e.g. number_format.

(I filed this as bug #46408, but apparently it's expected behavior.)

down

strata_ranger at hotmail dot com ¶

15 years ago

Regarding boolean values, just typecast them as (integer) when passing them in your query -- '0' and '1' are perfectly acceptable literals for SQL boolean input:

- http://www.postgresql.org/docs/8.2/interactive/datatype-boolean.html

It is also safe to write your paramerized query in double-quotes, which allows you to mix constant values and placeholders in your query without having to worry about how whether PHP will attempt to substitute any variables in your parameterized string.

Of course this also means that unlike PHP's double-quoted string syntax, you CAN include literal $1, $2, etc. inside SQL strings, e.g:

<?php
// Works ($1 is a placeholder, $2 is meant literally)
pg_query_params("INSERT INTO foo (col1, col2) VALUES ($1, 'costs $2')", Array($data1));

// Throws an E_WARNING (passing too many parameters)
pg_query_params("INSERT INTO foo (col1, col2) VALUES ($1, 'costs $2')", Array($data1, $data2));
?>

down

-1

mledford ¶

18 years ago

If you are trying to replicate the function pg_query_params, you might also want to support NULL values. While is_int returns true for a NULL value, the formatting for the SQL.

function pg_query_params( $db, $query, $parameters ) {
    // Escape parameters as required & build parameters for callback function
    global $pg_query_params__parameters;
    foreach( $parameters as $k=>$v ) {
        if ( is_null($v) ) {
            $parameters[$k] = 'NULL';
        } else {
            $parameters[$k] = ( is_int( $v ) ? $v : "'".pg_escape_string( $v )."'" );
        }
    }
    $pg_query_params__parameters = $parameters;
        
    // Call using pg_query
    return pg_query( $db, preg_replace_callback( '/\$([0-9]+)/', 'pg_query_params__callback', $query));
}

down

-1

cc+php at c2se dot com ¶

18 years ago

This is a useful function for preventing SQL injection attacks, so, for those of us who are not yet able to upgrade to PHP5.1, here is a replacement function which works similarly on older versions of PHP...

<?php   # Parameterised query implementation for Postgresql and older versions of PHP

        if( !function_exists( 'pg_query_params' ) ) {

                function pg_query_params__callback( $at ) {
                        global $pg_query_params__parameters;
                        return $pg_query_params__parameters[ $at[1]-1 ];
                }

                function pg_query_params( $db, $query, $parameters ) {

                        // Escape parameters as required & build parameters for callback function
                        global $pg_query_params__parameters;
                        foreach( $parameters as $k=>$v )
                                $parameters[$k] = ( is_int( $v ) ? $v : "'".pg_escape_string( $v )."'" );
                        $pg_query_params__parameters = $parameters;

                        // Call using pg_query
                        return pg_query( $db, preg_replace_callback( '/\$([0-9]+)/', 'pg_query_params__callback', $query ) );

                }
        }

        // Example: pg_query_params( $db_resource, "SELECT * FROM table WHERE col1=$1 AND col2=$2", array( 42, "It's ok" ) );
?>

down

-1

Anonymous ¶

7 years ago

If one of the parameters is an array,  (eg. array of ints being passed to a stored procedure),   it must be denoted as a set within the array,  not php array notation.  

eg:  var_dump output  of 2 parms an integer and array of int
aaa is: Array
(
    [0] => 1
    [1] => {2,3}
)

you do not want:

bbb is: Array
(
    [0] => 1
    [1] => Array
        (
            [0] => 2
            [1] => 3
        )

)

down

-2

php at richardneill dot org ¶

10 years ago

pg_query_params() *does* accept NULLs.  They will automatically be transformed, correctly, into SQL NULL. Thus, for example:

<?php
$sql = "UPDATE tbl_example SET column_a = $1, column_b=$2";
$params = array(NULL,  42);
$result = pg_params ($sql, $params);

//is equivalent to:
$result = pg_query ("UPDATE tbl_example SET column_a = NULL column_b  = '42')";

//and not, as one might fear,  either of these (incorrect) things:
// ... column_a = ''      ...
// ... column_a = 'NULL'  ...
?>

Note that you can use NULLs this way in an UPDATE or INSERT statement, but NOT in a WHERE clause. This isn't a restriction of pg_query_params(), but rather it is a consquence of the SQL language.
So, if you want a query of the type:

<?php
//depending on data,  the where-test parameter may or may not be NULL
//the following is WRONG for $1.
$sql = "SELECT * from  tbl_example WHERE column_a = $1 and column_b = $2";
$params = array(NULL,  42);
$result = pg_params ($sql, $params);
?>

This will fail as invalid SQL:  because you should use "= 42" but "IS NULL".  The solution is to use the SQL construct "IS [NOT] DISTINCT FROM".  

<?php
$sql = "SELECT ... WHERE column IS NOT DISTINCT FROM $1"
$params = array (42);    //this works, the same as  "where column = 42"
$params = array (NULL);  //this works, the same as "where column is null"
?>

(Aside: though this is annoying, the behaviour is correct. There is a postgresql compatibility option "transform_null_equals", but it won't help you here, even though you might expect it to.)

down

-1

php at richardneill dot org ¶

10 years ago

A note on type-juggling of booleans:
pg_query_params() and friends do seamless, automatic conversion between PHP-NULL and SQL-NULL and back again, where appropriate.
Hoever, everything else goes in (and comes out) as a string.
The following approach may be helpful when handling boolean fields:

<?php
$sql = " ... ";
$params = array (1, 2, 3, true, false);

//Convert booleans to 'true' and 'false'.  [NULLS are already handled].
foreach ($params as &$value){
    if (is_bool($value)){
        $value = ($value) ? 'true':'false';
    }
}

//Now do the query:
$result = pg_query_params ($sql, $params);
$row = pg_fetch_assoc ($result,0)  //first row

//For booleans, convert 't' and 'f' back to true and false. Check the column type so we don't accidentally convert the wrong thing.
foreach ($row as $key => &$value){ 
    $type = pg_field_type($result,pg_field_num($result, $key));
    if ($type == 'bool'){
        $value = ($value == 't');
    }
}

//$row[] now contains booleans, NULLS, and strings.
?>

down

-4

php at richardneill dot org ¶

10 years ago

For a parameterised date, the value NOW() is not allowed (it gets turned into a literal string and makes postgres choke),  however 'now'
is allowed as a parameter, and has the same effect.

＋adicione uma nota