(PHP 4, PHP 5, PHP 7, PHP 8)
unserialize — Erzeugt aus einem gespeicherten Datenformat einen Wert in PHP
unserialize() nimmt eine einzelne Variable aus einer serialisierten Datenmenge und wandelt sie in einen PHP-Wert zurück.
Unvertrauenswürdige Benutzereingaben sollten nicht an
unserialize() übergeben werden, unabhängig vom
options-Wert von
allowed_classes. Die Deserialisierung kann durch
Objektinstanziierung und Autoloading dazu führen, dass Code geladen und
ausgeführt wird, und ein böswilliger Anwender kann in der Lage sein, das
auszunutzen. Es ist ein sicheres, standardisiertes Austauschformat wie JSON
(per json_decode() und json_encode())
zu verwenden, wenn serialisierte Daten an den Nutzer übergeben werden müssen.
Müssen extern gespeicherte serialisierte Daten deserialisiert werden, ist zu erwägen hash_hmac() zur Datenvalidierung zu verwenden. Es ist sicherzustellen, dass die Daten von niemandem außer einem selbst modifiziert wurden.
dataDer serialisierte String.
Wenn die zu deserialisierende Variable ein Objekt ist, wird PHP nach der erfolgreichen Wiederherstellung des Objekts automatisch versuchen, die __unserialize()- oder __wakeup-Methode aufzurufen (sofern eine von diesen existiert).
Hinweis: Die Direktive unserialize_callback_func
Der in der Direktive unserialize_callback_func angegebene Callback wird aufgerufen, wenn eine undefinierte Klasse deserialisiert wird. Wenn kein Callback angegeben wird, wird das Objekt als __PHP_Incomplete_Class instanziiert.
optionsOptionen, die unserialize() als assoziatives Array zur Verfügung gestellt werden sollen.
| Name | Typ | Beschreibung |
|---|---|---|
allowed_classes |
mixed |
Entweder ein Array von Klassennamen, die akzeptiert werden
sollen, oder false um keine Klassen oder true um alle Klassen
zu akzeptieren. Ist diese Option angegeben und
unserialize() trifft auf ein Objekt einer
Klasse, die nicht akzeptierbar ist, wird das Objekt statt dessen
als __PHP_Incomplete_Class instanziiert.
Das Auslassen dieser Option hat die gleiche Wirkung wie sie als
true anzugeben: PHP wird versuchen Objekte beliebiger Klassen zu
instanziieren.
|
max_depth |
int |
Die maximale Tiefe von Strukturen, die während der
Deserialisierung erlaubt ist. Diese Option soll Stack-Überläufe
verhindern. Die Standardtiefe ist 4096 und kann
durch Setzen von max_depth auf
0 deaktiviert werden.
|
Der konvertierte Wert wird zurückgegeben und kann vom Typ bool, int, float, string, array oder object sein.
Falls der übergebene String nicht deserialisierbar ist, wird false
zurückgegeben und E_WARNING produziert.
Objekte können Throwables in ihren Deserialisierungs-Routinen ausführen.
| Version | Beschreibung |
|---|---|
| 8.3.0 |
Gibt nun einen Fehler der Stufe E_WARNING aus,
wenn der übergebene String nicht unserialisierbar ist; zuvor wurde ein
E_NOTICE ausgegeben.
|
| 7.4.0 |
Zu options wurde das Element
max_depth hinzugefügt, um die maximale Tiefe von
Strukturen festzulegen, die während der Deserialisierung erlaubt ist.
|
| 7.1.0 |
Das allowed_classes-Element von
options) ist nun strikt typisiert, d. h. wird
etwas anderes als ein Array oder ein bool
übergeben, liefert unserialize() false zurück und
löst ein E_WARNING aus.
|
Beispiel #1 unserialize()-Beispiel
<?php
// Als Beispiel benutzen wir unserialize(), um Daten aus einer Datenbank in das
// $session_data-Array zu laden. Das Beispiel vervollständigt das unter
// serialize() beschriebene.
$conn = odbc_connect("webdb", "php", "chicken");
$stmt = odbc_prepare($conn, "SELECT data FROM sessions WHERE id = ?");
$sqldata = array($_SERVER['PHP_AUTH_USER']);
if (!odbc_execute($stmt, $sqldata) || !odbc_fetch_into($stmt, $tmp)) {
// wenn execute oder fetch fehlschlägt, initialisiere ein leeres Array
$session_data = array();
} else {
// die serialisierten Daten sollten nun in $tmp[0] stehen.
$session_data = unserialize($tmp[0]);
if (!is_array($session_data)) {
// etwas ging schief, also wieder ein leeres Array initialisieren
$session_data = array();
}
}
?>
Beispiel #2 unserialize_callback_func-Beispiel
<?php
$serialized_object='O:1:"a":1:{s:5:"value";s:3:"100";}';
ini_set('unserialize_callback_func', 'mycallback'); // Festlegen der callback_function
function mycallback($classname)
{
// einfach eine Datei einbinden, dass die Klassendefinitionen enthält
// Sie erhalten $classname, womit Sie herausfinden können, welche
// Klassendefinition benötigt wird
}
?>
Just some reminder which may save somebody some time regarding the `$options` array:
Say you want to be on the safe side and not allow any objects to be unserialized... My first thought was doing the following:
<?php
$lol = unserialize($string, false);
// This will generate:
// Warning: unserialize() expects parameter 2 to be array, boolean given
?>
The correct way of doing this is the following:
<?php
$lol = unserialize($string, ['allowed_classes' => false]);
?>
Hope it helps somebody!Keep in mind that the allowed_classes does not use inheritance, i.e. allowing an interface is not possible and sub-classes won't pass the check. See https://3v4l.org/tdHflJust a note - if the serialized string contains a reference to a class that cannot be instantiated (e.g. being abstract) PHP will immediately die with a fatal error. If the unserialize() statement is preceded with a '@' to avoid cluttering the logs with warns or notices there will be absolutely no clue as to why the script stopped working. Cost me a couple of hours...Here's a simple function to get the class of a serialized string (that is, the type of object that will be returned if it's unserialized):
<?php
function get_serial_class($serial) {
$types = array('s' => 'string', 'a' => 'array', 'b' => 'bool', 'i' => 'int', 'd' => 'float', 'N;' => 'NULL');
$parts = explode(':', $serial, 4);
return isset($types[$parts[0]]) ? $types[$parts[0]] : trim($parts[2], '"');
}
?>
I use this when saving a serialized object to a cookie, to make sure it is the right type when I go to unserialize it.
The type names are the same format/case as you would see if you did a var_dump().For the people who are getting the error
PHP Notice: unserialize(): Error at offset 191 of 285 bytes in ...
and are getting the data from a database, Make sure that you have the database set the the correct encoding, I had the database set as latin1_swedish_ci and all of the data looked perfect, Infact when i copied it into a online unserialize it worked fine. I changed the collation to utf8mb4_unicode_ci and all worked fine.Talk on Exploiting PHP7 Unserialize here: https://media.ccc.de/v/33c3-7858-exploiting_php7_unserializeWhen you serialize an object of a class from a particular namespace, the namespace is recorded as part of the serialization. If you decide to change this namespace's name, it can be hard to read in old serialized objects. I.e., suppose you had serialized an object of type foo\A, you change the namespace of your project to goo but otherwise leave the class definition of A unchanged. You would like to be able to unserialize the object as goo\A, instead unserialization will only create a partial object. To fix this in the case where you don't have nested objects in your class definition, you can use the following simple rename function:
/**
* Used to change the namespace of a serialized php object (assumes doesn't
* have nested subobjects)
*
* @param string $class_name new fully qualified name with namespace
* @param string $object_string serialized object
*
* @return string serialized object with new name
*/
function renameSerializedObject($class_name, $object_string)
{
/* number of digits in the length of name of the object needs to be
less than 12 digits (probably more like 4) for this to work.
*/
$name_length = intval(substr($object_string, 2, 14));
$name_space_info_length = strlen("O:".$name_length.":") +
$name_length + 2; // 2 for quotes;
$object_string = 'O:' .
strlen($class_name) . ':"'. $class_name.'"' .
substr($object_string, $name_space_info_length);
return $object_string;
}In the Classes and Objects docs, there is this: In order to be able to unserialize() an object, the class of that object needs to be defined.
Prior to PHP 5.3, this was not an issue. But after PHP 5.3 an object made by SimpleXML_Load_String() cannot be serialized. An attempt to do so will result in a run-time failure, throwing an exception. If you store such an object in $_SESSION, you will get a post-execution error that says this:
Fatal error: Uncaught exception 'Exception' with message 'Serialization of 'SimpleXMLElement' is not allowed' in [no active file]:0 Stack trace: #0 {main} thrown in [no active file] on line 0
The entire contents of the session will be lost. Hope this saves someone some time!
<?php // RAY_temp_ser.php
error_reporting(E_ALL);
session_start();
var_dump($_SESSION);
$_SESSION['hello'] = 'World';
var_dump($_SESSION);
// AN XML STRING FOR TEST DATA
$xml = '<?xml version="1.0"?>
<families>
<parent>
<child index="1" value="Category 1">Child One</child>
</parent>
</families>';
// MAKE AN OBJECT (GIVES SimpleXMLElement)
$obj = SimpleXML_Load_String($xml);
// STORE THE OBJECT IN THE SESSION
$_SESSION['obj'] = $obj;As mentioned in the notes, unserialize returns false in the event of an error and for boolean false. Here is the first solution mentioned, without using error handling:
<?php
function isSerialized($str) {
return ($str == serialize(false) || @unserialize($str) !== false);
}
var_dump(isSerialized('s:6:"foobar";')); // bool(true)
var_dump(isSerialized('foobar')); // bool(false)
var_dump(isSerialized('b:0;')); // bool(true)
?>You can use the following code to use the php 7 unserialize function in php 5.3 and upwards. This adds the $option argument.
<?php
namespace
{
/**
* PHP 7 unserialize function for PHP 5.3 upwards.
* Added the $option argument (allowed_classes).
* See php unserialize manual for more detail.
**/
function php7_unserialize($str, $options = array())
{
if(version_compare(PHP_VERSION, '7.0.0', '>='))
{ return unserialize($str, $options); }
$allowed_classes = isset($options['allowed_classes']) ?
$options['allowed_classes'] : true;
if(is_array($allowed_classes) || !$allowed_classes)
{
$str = preg_replace_callback(
'/(?=^|:)(O|C):\d+:"([^"]*)":(\d+):{/',
function($matches) use ($allowed_classes)
{
if(is_array($allowed_classes) &&
in_array($matches[2], $allowed_classes))
{ return $matches[0]; }
else
{
return $matches[1].':22:"__PHP_Incomplete_Class":'.
($matches[3] + 1).
':{s:27:"__PHP_Incomplete_Class_Name";'.
serialize($matches[2]);
}
},
$str
);
}
unset($allowed_classes);
return unserialize($str);
}
} // namespace
namespace my_name_space
{
/**
* Use the new php7 unserialize in your namespace without
* renaming all unserialize(...) function calls to
* php7_unserialize(...).
**/
function unserialize($str, $options = array())
{ return php7_unserialize($str, $options); }
}
?>__PHP_Incomplete_Class Object Demystified
1. First take note of the output. A simple example:
__PHP_Incomplete_Class Object (
[__PHP_Incomplete_Class_Name] => SomeObject1
[obj1property1] => somevalue1 [obj1property2] => __PHP_Incomplete_Class Object ( [__PHP_Incomplete_Class_Name] => SomeObject2 [obj2property1] => somevalue1 [obj2property2] => Array (
['key1'] => somevalue3, ['key2'] => somevalue4 ) ) )
2. We analyze this and break it down.
__PHP_Incomplete_Class Object tells you there is an object that needs to be declared somehow.
__PHP_Incomplete_Class_Name simply tells you the expected class name. It is just one of the properties for now.
So we have:
a) an unknown object that has a class name SomeObject1 (first class)
b) it has 2 properties, namely obj1property1 and obj2property2
c) obj2property2 is itself an object whose class name is SomeObject2 (the second class)
d) SomeObject2 has two properties, obj2property1 and obj2property2
e) obj2property2 is an array that contains two elements
3. Now that we have an idea of the structure, we shall create class definitions based from it. We will just create properties for now, methods are not required as a minimum.
<?php
class SomeObject1 {
public $obj1property1;
public $obj1property2;
}
class SomeObject2 {
public $obj2property1;
public $obj2property2;
}
?>
4. Have that accessible to your script and it will solve the __PHP_Incomplete_Class Object problem as far as the output is concerned. Now you will have:
SomeObject1 ( [obj1property1] => somevalue1 [obj1property2] => SomeObject2 ( [obj2property1] => somevalue1 [obj2property2] => Array ( ['key1'] => somevalue3, ['key2'] => somevalue4 ) ) )
As you will notice, __PHP_Incomplete_Class Object is gone and replaced by the class name. The property __PHP_Incomplete_Class_Name is also removed.
5. As for the array property obj2property2, we can directly access that and just assume that it is an array and loop through it:
<?php
// this will be SomeObject1
$data = unserialize($serialized_data);
// this will be SomeObject2
$data2 = $data->obj1property2();
foreach($data2->obj2property2 as $key => $value):
print $key.' : '. $value .'<br>';
endforeach;
?>
Outputs:
key1 : somevalue3
key2 : somevalue4
That's it. You can add more methods on the class declarations for the given properties, provided you keep your original output as basis for the data types.When trying to serialize or unserialize recursive arrays or otherwise linked data you might find the undocumented R data type quite useful.
If you want a array like the one produced with
<?
$a = array();
$a[0] =& $a;
?>
serialized you can store it using a string simular to this one:
<?
$a = unserialize("a:1:{i:0;R:1;}");
?>
Both sources will make $a hold an array that self-references itself in index 0.
The argument for R is the index of the created sub-variable of the serialize-string beginning with 1.Anyone having trouble serializing data with SimpleXMLElement objects stored within it, check this out:
This will traverse $data looking for any children which are instances of SimpleXMLElement, and will run ->asXML() on them, turning them into a string and making them serializable. Other data will be left alone.
<?php
function exportNestedSimpleXML($data) {
if (is_scalar($data) === false) {
foreach ($data as $k => $v) {
if ($v instanceof SimpleXMLElement) {
$v = str_replace(" ","\r",$v->asXML());
} else {
$v = exportNestedSimpleXML($v);
}
if (is_array($data)) {
$data[$k] = $v;
} else if (is_object($data)) {
$data->$k = $v;
}
}
}
return $data;
}
$data = array (
"baz" => array (
"foo" => new stdClass(),
"int" => 123,
"str" => "asdf",
"bar" => new SimpleXMLElement('<?xml version="1.0" encoding="UTF-8"?><foo>bar</foo>'),
)
);
var_dump($data);
/*array(1) {
["baz"]=>
array(4) {
["foo"]=>
object(stdClass)#3 (0) {
}
["int"]=>
int(123)
["str"]=>
string(4) "asdf"
["bar"]=>
object(SimpleXMLElement)#4 (1) {
[0]=>
string(3) "bar"
}
}
}*/
var_dump(exportNestedSimpleXML($data));
/*array(1) {
["baz"]=>
array(4) {
["foo"]=>
object(stdClass)#3 (0) {
}
["int"]=>
int(123)
["str"]=>
string(4) "asdf"
["bar"]=>
string(54) "<?xml version="1.0" encoding="UTF-8"?>
<foo>bar</foo>
"
}
}
*/
?>This little function will check whether the serialized string is well formed.
PHP < 6 because i'd heard changes will be made in this php-intern function,
maybe it could be edited easy for it.
<?php
function wd_check_serialization( $string, &$errmsg )
{
$str = 's';
$array = 'a';
$integer = 'i';
$any = '[^}]*?';
$count = '\d+';
$content = '"(?:\\\";|.)*?";';
$open_tag = '\{';
$close_tag = '\}';
$parameter = "($str|$array|$integer|$any):($count)" . "(?:[:]($open_tag|$content)|[;])";
$preg = "/$parameter|($close_tag)/";
if( !preg_match_all( $preg, $string, $matches ) )
{
$errmsg = 'not a serialized string';
return false;
}
$open_arrays = 0;
foreach( $matches[1] AS $key => $value )
{
if( !empty( $value ) && ( $value != $array xor $value != $str xor $value != $integer ) )
{
$errmsg = 'undefined datatype';
return false;
}
if( $value == $array )
{
$open_arrays++;
if( $matches[3][$key] != '{' )
{
$errmsg = 'open tag expected';
return false;
}
}
if( $value == '' )
{
if( $matches[4][$key] != '}' )
{
$errmsg = 'close tag expected';
return false;
}
$open_arrays--;
}
if( $value == $str )
{
$aVar = ltrim( $matches[3][$key], '"' );
$aVar = rtrim( $aVar, '";' );
if( strlen( $aVar ) != $matches[2][$key] )
{
$errmsg = 'stringlen for string not match';
return false;
}
}
if( $value == $integer )
{
if( !empty( $matches[3][$key] ) )
{
$errmsg = 'unexpected data';
return false;
}
if( !is_integer( (int)$matches[2][$key] ) )
{
$errmsg = 'integer expected';
return false;
}
}
}
if( $open_arrays != 0 )
{
$errmsg = 'wrong setted arrays';
return false;
}
return true;
}
?>Be aware that if useing serialize/unserialize in a serverfarm with both 32bit and 64bit servers you can get unexpected results.
Ex: if you serialize an integer with value of 2147483648 on a 64bit system and then unserialize it on a 32bit system you will get the value -2147483648 instead. This is because an integer on 32bit cannot be above 2147483647 so it wraps.When dealing with a string which contain "\r", it seems that the length is not evaluated correctly. The following solves the problem for me :
<?php
// remove the \r caracters from the $unserialized string
$unserialized = str_replace("\r","",$unserialized);
// and then unserialize()
unserialize($unserialized);
?>I was getting unserialize() Error at offset error.
If you face similar problem then use the following procedure
$auctionDetails = preg_replace('!s:(\d+):"(.*?)";!se', "'s:'.strlen('$2').':\"$2\";'", $dataArr[$i]['auction_details'] );
$auctionDetails = unserialize($auctionDetails);Please note there is a minor difference in how unserializa() works between PHP 7 and 8.
Under PHP 8, strings that are not trimmed of whitespace will emit a warning in the likes of:
PHP Warning: unserialize(): Extra data starting at offset 721 of 722 bytes in /tmp/a.php on line 4
so something like:
$s = 's:3:"bar";'."\n"
unserialize($s); # warning emitted
unserialize(trim($s)); # no warningIn reply to the earlier post about having to include object definitions *before* using unserialize. There is a workaround for this.
When an object is serialized, the first bit of the string is actually the name of the class. When an unknown object is unserialized, this is maintained as a property. So if you serialize it again, you get back the exact same string as if you'd serialized the original object. Basically, to cut to the point...
If you use
$_SESSION['my_object'] = unserialize(serialize($_SESSION['my_object']))
then you get back an object of the correct type, even if the session had originally loaded it as an object of type stdClass.For those who are looking for an efficient solution for handling controversial "FALSE", they can use this function which in case of non-unserializable string, instead of a "FALSE", throws an Exception. Vice versa it returns the unserialized variable.
<?php
/**
* @param string $serializedString
* @param array $options
* @return mixed
* @throws Exception
*/
function UnSerialize(string $serializedString, array $options = []) {
$_unserialized = @unserialize($serializedString, $options);
if ($serializedString === serialize(false) || $_unserialized !== false){
return $_unserialized;
}
throw new Exception("Non-unserializable string");
}
?>A quick note:
If you store a serialized object in a session, you have to include the class _before_ you initialize (session_start()) the session.If serialize() is the answer, you're almost certainly asking the wrong question.
JSON is widely available. The only thing it does not do, is the very thing that makes serialization immensely dangerous. All it takes is a crafty hacker to pass a crafted payload to a supposedly 'secured' serialize call, for a database driver to be overwritten with malicious code, for example.
Recreate the object. Normally. With actual data, and a source file, not with serialize. To do otherwise is laziness bordering on malice.