pcntl_wait

(PHP 5, PHP 7, PHP 8)

pcntl_wait — Attend ou retourne le statut d'un processus fils

Description

pcntl_wait(int &$status, int $flags = 0, array &$resource_usage = []): int

pcntl_wait() suspend l'exécution du processus courant jusqu'à ce qu'un des processus fils soit terminé, ou qu'un signal soit envoyé pour terminer le processus courant ou pour appeler un gestionnaire. Si le processus est déjà terminé au moment de l'appel de la fonction, c'est-à-dire si le processus est un zombie, alors la fonction se termine immédiatement. Toutes les ressources système utilisées par le processus fils sont libérées. Lisez le manuel de votre système à wait(2) pour avoir des détails spécifiques sur le fonctionnement de wait() sur celui-ci.

Note:
Cette fonction est équivalente à appeler la fonction pcntl_waitpid() avec un process_id valant -1 et aucun flags.

Liste de paramètres

status

pcntl_wait() va stocker les informations de statut dans le paramètre status qui peut être lu avec les fonctions suivantes : pcntl_wifexited(), pcntl_wifstopped(), pcntl_wifsignaled(), pcntl_wexitstatus(), pcntl_wtermsig() et pcntl_wstopsig().

flags

Si wait3 est disponible sur votre système (c'est le cas de la plupart des systèmes BSD-), vous pouvez ajouter le paramètre optionnel flags. S'il n'est pas fourni, wait() sera utilisé pour l'appel système. Si wait3 n'est pas disponible, le paramètre flags n'aura pas d'effet. La valeur de flags est la combinaison de zéro ou plusieurs des constantes suivantes :

**Valeurs possibles pour `flags`**
`WNOHANG`	Termine immédiatement si aucun processus ne s'est terminé.
`WUNTRACED`	Termine pour les processus qui sont stoppés, et pour ceux dont le résultat n'a pas été rapporté.

Valeurs de retour

pcntl_wait() retourne l'identifiant de processus qui s'est terminé, -1 en cas d'erreur ou zéro si WNOHANG a été fourni comme option (disponible sur les systèmes wait3), et qu'aucun processus fils n'était disponible.

Voir aussi

pcntl_fork() - Duplique le process courant
pcntl_signal() - Installe un gestionnaire de signaux
pcntl_wifexited() - Vérifie si le code de retour représente une fin normale
pcntl_wifstopped() - Retourne true si le processus fils est stoppé
pcntl_wifsignaled() - Retourne true si le code statut représente une fin due à un signal
pcntl_wexitstatus() - Retourne le code d'un processus fils terminé
pcntl_wtermsig() - Retourne le signal qui a provoqué la fin du processus fils
pcntl_wstopsig() - Retourne le signal qui a causé l'arrêt du processus fils
pcntl_waitpid() - Attend la fin de l'exécution d'un processus fils

Improve This Page

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 7 notes

down

federico at nextware dot it ¶

18 years ago

This a simple multi process application where you can choose 

the maximun process that can run at the same time.

This is useful when you need to limit the fork of process.

When the MAXPROCESS is reached the program wait on pcntl_wait()



<?php



DEFINE(MAXPROCESS,25);



for ($i=0;$i<100;$i++){

    $pid = pcntl_fork();

    

    if ($pid == -1) {

       die("could not fork");

    } elseif ($pid) {

                echo "I'm the Parent $i\n";

        $execute++;

        if ($execute>=MAXPROCESS){

            pcntl_wait($status);

            $execute--;

        }

    } else {

       echo "I am the child, $i pid = $pid \n";

       sleep(rand(1,3));

       echo "Bye Bye from $i\n";        

       exit;

    }

}

?>

down

duerra at yahoo dot com ¶

14 years ago

Using pcntl_fork() can be a little tricky in some situations.  For fast jobs, a child can finish processing before the parent process has executed some code related to the launching of the process.  The parent can receive a signal before it's ready to handle the child process' status.  To handle this scenario, I add an id to a "queue" of processes in the signal handler that need to be cleaned up if the parent process is not yet ready to handle them.

<?php
declare(ticks=1);
//A very basic job daemon that you can extend to your needs.  
class JobDaemon{

    public $maxProcesses = 25;
    protected $jobsStarted = 0; 
    protected $currentJobs = array();
    protected $signalQueue=array();    
    protected $parentPID;
    
    public function __construct(){
        echo "constructed \n";
        $this->parentPID = getmypid();
        pcntl_signal(SIGCHLD, array($this, "childSignalHandler"));
    }
    
    /** 
    * Run the Daemon
    */
    public function run(){
        echo "Running \n";
        for($i=0; $i<10000; $i++){
            $jobID = rand(0,10000000000000);
            $launched = $this->launchJob($jobID);
        }
        
        //Wait for child processes to finish before exiting here
        while(count($this->currentJobs)){
            echo "Waiting for current jobs to finish... \n";
            sleep(1);
        }
    }
    
    /** 
    * Launch a job from the job queue
    */
    protected function launchJob($jobID){
        $pid = pcntl_fork();
        if($pid == -1){
            //Problem launching the job
            error_log('Could not launch new job, exiting');
            return false;
        }
        else if ($pid){
            // Parent process
            // Sometimes you can receive a signal to the childSignalHandler function before this code executes if 
            // the child script executes quickly enough!
            //
            $this->currentJobs[$pid] = $jobID;
            
            // In the event that a signal for this pid was caught before we get here, it will be in our signalQueue array
            // So let's go ahead and process it now as if we'd just received the signal
            if(isset($this->signalQueue[$pid])){
                echo "found $pid in the signal queue, processing it now \n";
                $this->childSignalHandler(SIGCHLD, $pid, $this->signalQueue[$pid]);
                unset($this->signalQueue[$pid]);
            }
        }
        else{
            //Forked child, do your deeds.... 
            $exitStatus = 0; //Error code if you need to or whatever
            echo "Doing something fun in pid ".getmypid()."\n";
            exit($exitStatus);
        }
        return true;
    }
    
    public function childSignalHandler($signo, $pid=null, $status=null){
        
        //If no pid is provided, that means we're getting the signal from the system.  Let's figure out
        //which child process ended
        if(!$pid){
            $pid = pcntl_waitpid(-1, $status, WNOHANG);
        }
        
        //Make sure we get all of the exited children
        while($pid > 0){
            if($pid && isset($this->currentJobs[$pid])){
                $exitCode = pcntl_wexitstatus($status);
                if($exitCode != 0){
                    echo "$pid exited with status ".$exitCode."\n";
                }
                unset($this->currentJobs[$pid]);
            }
            else if($pid){
                //Oh no, our job has finished before this parent process could even note that it had been launched!
                //Let's make note of it and handle it when the parent process is ready for it
                echo "..... Adding $pid to the signal queue ..... \n";
                $this->signalQueue[$pid] = $status;
            }
            $pid = pcntl_waitpid(-1, $status, WNOHANG);
        }
        return true;
    }
}

down

gaylord at 100days dot de ¶

14 years ago

pcntl_wait will not terminate on signals if you have a PHP signal handler activated (pcntl_signal).
This is unless the signal handler was activated with 3rd parameter=true.

Example:
<?php
declare(ticks=1);
pcntl_signal(SIGTERM, "myHandler");
$pid=pcntl_wait($status);
?>

This will not terminate on SIGTERM sent to the process, because "wait" will be restarted after php recieves the signal. The signal handler "myHandler" will not be called unless pcntl_wait terminates for some other reason.

Change to:
<?php
declare(ticks=1);
pcntl_signal(SIGTERM, "myHandler", true);
$pid=pcntl_wait($status);
?>

Now the pcntl_wait terminates when a signal comes in and "myHandler" will be called on SIGTERM. (Make sure to put the wait in a loop though, because it will now not only terminate when a child exits but also when a signal arrives. Test for $pid>0 to detect a exit message from a child)
(thanks to Andrey for helping me debugging this)

down

duerra at yahoo dot com ¶

14 years ago

Oops, I stripped just a little much from the job daemon code in the previous comment.  You'll want to add a little line before the ->launchJob() method is called:

<?php

while(count($this->currentJobs) >= $this->maxProcesses){
    echo "Maximum children allowed, waiting...\n";
    sleep(1); 
}

down

digitalaudiorock at gmail dot com ¶

14 years ago

I was unable to get pcntl_wait or pcntl_waitpid to terminate when I had an active signal handler.  I then noticed the post below from gaylord at 100days dot de, however I'm a little confused by that post as I found the exact opposite to be true.  The default value of the third parameter of pcntl_signal (the restart_syscalls parameter) is true and this seems to cause the wait to continue when the signal arrives.  In order to prevent this I had to expressly set it to false.  That is:

pcntl_signal(SIGTERM, 'my_handler_function', false);

down

thisisroot at gmail dot com ¶

19 years ago

Below is a simple example of forking some children and timing the total duration (useful for stress tests).

<?php

$isParent    = true;
$children    = array();
$start        = microtime( true);

/* Fork you!
 * (Sorry, I had to)
 */
$ceiling = $CONCURRENCY - 1;

for ( $i = 0; (( $i < $ceiling) && ( $isParent)); $i++) {
    $pid = pcntl_fork();
    if ( $pid === 0) {
        $isParent = false;
        
    } elseif ( $pid != -1) {
        $children[] = $pid;
        
    }

}

/* Process body */
echo "Do stuff here\n";

/* Cleanup */
if ( $isParent) {
    $status = null;
    while ( count( $children)) {
        pcntl_wait( $status);
        array_pop( $children);
    }
    
    echo "Completed in " . ( microtime( true) - $start) . " seconds.\n";
    
}

?>

down

-1

thomas dot nicolai at unisg dot ch ¶

18 years ago

The code before isnt working for me cause the children are correctly started but not refreshed after they died. So keep in mind to use this instead and use the signal handler to know when a child exits to know when you have to start a new one. I added a few lines to the posting from {andy at cbeyond dot net} cause his post wasnt working for me as well (PHP5.1). Same effect like the one below.

<?php
declare(ticks = 1);

$max=5;
$child=0;

// function for signal handler
function sig_handler($signo) {
  global $child;
  switch ($signo) {
   case SIGCHLD:
     echo "SIGCHLD received\n";
     $child--;
  }
}

// install signal handler for dead kids
pcntl_signal(SIGCHLD, "sig_handler");

while (1){
       $child++;
       $pid=pcntl_fork();
       
       if ($pid == -1) {
               die("could not fork");
       } else if ($pid) {
               
               // we are the parent
               if ( $child >= $max ){
                   pcntl_wait($status);
                   $child++;
               }
       } else {
               // we are the child
               echo "\t Starting new child | now we de have $child child processes\n";
               // presumably doing something interesting
               sleep(rand(3,5));
               exit;
       }
}
?>

＋add a note