proc_get_status

(PHP 5, PHP 7, PHP 8)

proc_get_status — Lit les informations concernant un processus ouvert par proc_open()

Description

proc_get_status(resource $process): array

proc_get_status() lit les données concernant le processus process créé avec la fonction proc_open().

Liste de paramètres

process: La resource proc_open() à évaluer.

Valeurs de retour

Un tableau contenant les informations collectées. Le tableau retourné contient les éléments suivants :

Élément	Type	Description
command	chaîne de caractères	La commande passée à la fonction proc_open().
pid	entier	identifiant du processus
running	booléen	`true` si le processus fonctionne toujours et `false` s'il est terminé.
signaled	booléen	`true` si le processus fils a été terminé par un signal inconnu. Toujours défini à `false` sous Windows.
stopped	booléen	`true` si le processus fils a été stoppé par un signal. Toujours défini à `false` sous Windows.
exitcode	entier	Le code retourné par le processus (uniquement si l'élément `running` vaut `false`). Avant PHP 8.3.0, seule la première appel de cette fonction retournait la vraie valeur, les appels suivants retournaient `-1`.
mis en cache	bool	À partir de PHP 8.3.0, ceci est `true` lorsque le code de sortie est mis en cache. La mise en cache est nécessaire pour s'assurer que le code de sortie n'est pas perdu lors des appels suivants aux API de traitement.
termsig	entier	le numéro du signal qui a causé la fin de l'exécution du processus fils (uniquement significatif si `signaled` vaut `true`).
stopsig	entier	le numéro du signal qui a causé l'arrêt de l'exécution du processus fils (uniquement significatif si `signaled` vaut `true`).

Historique

Version	Description
8.3.0	L'entrée `"mis en cache"` a été ajoutée au tableau retourné. Avant PHP 8.3.0, seule la première appel retournait le vrai code de sortie. L'entrée `"mis en cache"` indique que le code de sortie a été mis en cache.

Voir aussi

proc_open() - Exécute une commande et ouvre les pointeurs de fichiers pour les entrées / sorties

Found A Problem?

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 9 notes

down

Mark Seecof ¶

15 years ago

On Unix/Linux, if you change the command line you pass to proc_open() just slightly then proc_get_status() will give you the actual process-id (pid) of your child.

Suppose you wish to run the external command /usr/bin/compress to create a BSD foo.Z file.  Rather than proc_open("/usr/bin/compress /tmp/foo",...) you may invoke proc_open("exec /usr/bin/compress /tmp/foo",...) and then proc_get_status()['pid'] will be the actual pid of /usr/bin/compress.

Why?  Because the way proc_open() actually works on Unix/Linux is by starting "/bin/sh -c usercmd userargs...", e.g., "/bin/sh -c /usr/bin/compress /tmp/foo".[Note 1]  That means normally your command is the child of the shell, so the pid you retrieve with proc_get_status() is the pid of the shell (PHP's child), and you have to fumble around trying to find the pid of your command (PHP's grandchild).  But if you put "exec" in front of your command, you tell the shell to *replace itself* with your command without starting another process (technically, to exec your command without forking first).  That means your command will inherit the pid of the shell, which is the pid that proc_get_status() returns.

So if you would like the actual pid of the process running your command, just prepend "exec " to  your proc_open() command argument then retrieve the pid using proc_get_status().

This also makes proc_terminate() and proc_close() work more like you might prefer, since they will affect the actual process running your command (which will be a child process rather than a grandchild process).

[Note 1] My guess is that the PHP developers want the shell to expand wildcards in path/filenames.

down

php dot net at crazedsanity dot com ¶

15 years ago

For clarification, the "exitcode" is only valid the FIRST TIME IT IS CALLED after the process exits.

If you have a method that polls a spawned process for its status, you *MUST* have that same method capture the exitcode: if the method is called a second time (after realizing the pid is dead) and it hasn't cached that exitcode, it will receive the -1 mentioned.

down

Lachlan Mulcahy ¶

13 years ago

It is worth noting that proc_get_status will continue to indicate the process that you spawned is running (because it is!) until that process has been able to write everything it wants to write to the STDOUT and STDERR streams.

PHP seems to use a buffer for this and so the spawned process can can get it's write calls to return immediately. 

However, once this buffer is full the write call will block until you read out some of the information from the stream/pipe.

This can manifest itself in many ways but generally the called process will still be running, but just not doing anything as it is blocking on being able to write more to STDERR or STDOUT -- whichever stream buffer is full.

To work around this you should include in your loop of checking proc_get_status' running element a "stream_get_contents" on the relevant pipes.

I generally use stream_set_blocking($pipies[2], 0) kind of calls to make sure that the stream_get_contents call will not block if there is no data in the stream.

This one had me stumped for a while, so hopefully it helps someone!

down

webmaster at rouen dot fr ¶

16 years ago

The following function takes an array of shell commands and executes them. It is able to execute up to $nb_max_process at the same time. As soon as one process is terminated, another one is executed. Quite useful if you want to batch process commands on a multi-processor or multi-core environment.

The example below tries to convert to PNG a list of SVG files submitted on the command line (using Inkscape).

(it's quick and dirty but works very well for me)

#!/usr/bin/php
<?php
function pool_execute($commandes,$nb_max_process) {
  $pool=array();
  for($i=0;$i<$nb_max_process;$i++) {
    $pool[$i]=FALSE;
  }

  while(count($commandes)>0) {
    $commande=array_shift($commandes);

    $commande_lancee=FALSE;
    while($commande_lancee==FALSE) {
      usleep(50000);

      for($i=0;$i<$nb_max_process and $commande_lancee==FALSE;$i++) {
        if($pool[$i]===FALSE) {
          $pool[$i]=proc_open($commande,array(),$foo);
          $commande_lancee=TRUE;
        } else {
          $etat=proc_get_status($pool[$i]);
          if($etat['running']==FALSE) {
            proc_close($pool[$i]);
            $pool[$i]=proc_open($commande,array(),$foo);
            $commande_lancee=TRUE;
          }
        }
      }
    }
  }
}

$fichiers=$argv;
array_shift($fichiers);
$commandes=array();
foreach($fichiers as $fichier) {
  $entree=$fichier;
  $sortie=basename($fichier,'.svg').".png";
  $commandes[]='inkscape --file='.escapeshellarg($entree).' --export-area-canvas --export-png='.escapeshellarg($sortie);
}

pool_execute($commandes,4);

down

strrev xc.noxeh@ellij ¶

16 years ago

You can NOT rely on pid+1.
You could prefix exec to the command string, this will replace the /bin/sh script with the real thing you want to exec (use only if you don't do 'scary things' like pipes, output redirection, multiple commands, however if you know how they work, go ahead).
If you prefix exec, the /bin/sh process will only start your process, and the PID will be the same.

down

marco dot marsala at live dot it ¶

1 year ago

If launching a GNU screen with proc_open, subsequents proc_get_status always return (wrongly) running = false

$descriptorspec = array(
     0 => array("pipe", "r"),  // stdin
     1 => array("pipe", "w"),  // stdout
     2 => array("pipe", "w") // stderr
);
$p = proc_open('screen ...', $descriptorspec, $pipes);
var_dump(proc_get_status($p)['running']); // false (wrong)

down

damien at cyg dot net ¶

17 years ago

Alternatively, if you're calling a subsequent php script using proc_open, you can have that process echo its own actual PID in the output.
Also, if you go through the /proc filesystem on linux, you can read through /proc/12345 where 12345 is the pid returned by proc_get_status (the pid of the /bin/sh instance) and it will list its child processes within.

down

-1

andy dot shellam at mailnetwork dot co dot uk ¶

17 years ago

Further to my previous note, I've found out the PID returned is the PID of the shell (/bin/sh) that then runs the actual command requested.

I've raised this as bug #41003.

down

-3

andy dot shellam at mailnetwork dot co dot uk ¶

17 years ago

To the poster above, same here on FreeBSD 6.1, PHP 5.2.1.

To get the correct PID to use for posix_kill I have to add 1 to the PID returned from proc_get_status.

＋add a note