In PHP 7.1 we can do the following:
<?php
[$a, $b, $c] = ['a', 'b', 'c'];
?>
Before, we had to do:
<?php
list($a, $b, $c) = ['a', 'b', 'c'];
?>
(PHP 4, PHP 5, PHP 7, PHP 8)
list — Assegna valori a delle variabili come se fossero un array
Come array(), questa non è in realtà una funzione, bensì un costrutto del linguaggio. list() è usata per assegnare valori ad una lista di variabili in una sola operazione.
Nota:
list() funziona solo su array numerici e si aspetta che gli indici numerici partano da 0.
In PHP 5, list() assegna i valori partendo dal parametro più a destra. In PHP 7, list() comincia dal parametro più a sinistra.
Se si stanno usando variabili semplici, non ci si deve preoccupare di questo comportamento. Ma se si stanno usando array con indici ci si aspetta che l'ordine degli indici nell'array sia lo stesso scritto nella funzione list() da sinitra a destra; non è il caso in PHP 5, dal momento che sono assegnati in ordine inverso.
In generale, è sconsigliato fare affidamento su uno specifico ordine di operazioni, dal momento che questo può cambiare in futuro.
La modifica dell'array durante l'esecuzione di list() (es.
usando list($a, $b) = $b ha un comportamento indefinito.
var1Una variabile.
Restituisce l'array assegnato.
Example #1 esempio di list()
<?php
$info = array('caffè', 'scuro', 'caffeina');
// assegna a tutte le variabili
list($bevanda, $colore, $componente) = $info;
echo "Il $bevanda è $colore e la $componente lo rende speciale.\n";
// assegna solo in parte
list($bevanda, , $componente) = $info;
echo "Il $bevanda ha la $componente.\n";
// oppure assegnamo solo l'ultima variabile
list( , , $componente) = $info;
echo"Ho voglia di $componente!\n";
// list() non funziona con le stringhe
list($bar) = "abcde";
var_dump($bar); // NULL
?>
Example #2 Esempio di uso di list()
<table>
<tr>
<th>Nome dell'impiegato</th>
<th>Stipendio</th>
</tr>
<?php
$risultato = $pdo_query("SELECT id, nome, stipendio FROM impiegati");
while (list($id, $nome, $stipendio) = $result->fetch(PDO::FETCH_NUM)) {
echo (" <tr>\n".
" <td><a href=\"info.php?id=$id\">$nome</a></td>\n".
" <td>$stipendio</td>\n".
" </tr>\n");
}
?>
</table>
Example #3 Utilizzare list() annidate
<?php
list($a, list($b, $c)) = array(1, array(2, 3));
var_dump($a, $b, $c);
?>int(1) int(2) int(3)
Example #4 Utilizzo di list() con gli indici
<?php
$info = array('caffè', 'nero', 'caffeina');
list($a[0], $a[1], $a[2]) = $info;
var_dump($a);
?>Restituisce il seguente risultato (si noti l'ordine degli elementi rispetto all'ordine con cui sono stati scritti nella sintassi di list()).
Output of the above example in PHP 7:
array(3) {
[2]=>
string(8) "caffeina"
[1]=>
string(4) "nero"
[0]=>
string(5) "caffè"
}
Output of the above example in PHP 5:
array(3) {
[2]=>
string(8) "caffeine"
[1]=>
string(5) "brown"
[0]=>
string(6) "coffee"
}
Example #5 list() e ordine delle definizioni dell'indice
L'ordine con il quale sono definiti gli indici dell'array da consumare da parte di list() è irrilevante.
<?php
$foo = array(2 => 'a', 'foo' => 'b', 0 => 'c');
$foo[1] = 'd';
list($x, $y, $z) = $foo;
var_dump($foo, $x, $y, $z);Restituisce il seguente risultato (si noti l'ordine degli elementi in rapporto a quello con cui sono scritti nella sintassi di list()):
array(4) {
[2]=>
string(1) "a"
["foo"]=>
string(1) "b"
[0]=>
string(1) "c"
[1]=>
string(1) "d"
}
string(1) "c"
string(1) "d"
string(1) "a"
In PHP 7.1 we can do the following:
<?php
[$a, $b, $c] = ['a', 'b', 'c'];
?>
Before, we had to do:
<?php
list($a, $b, $c) = ['a', 'b', 'c'];
?>Since PHP 7.1, keys can be specified
exemple :
<?php
$array = ['locality' => 'Tunis', 'postal_code' => '1110'];
list('postal_code' => $zipCode, 'locality' => $locality) = $array;
print $zipCode; // will output 1110
print $locality; // will output Tunis
?>The example showing that:
$info = array('kawa', 'brązowa', 'kofeina');
list($a[0], $a[1], $a[2]) = $info;
var_dump($a);
outputs:
array(3) {
[2]=>
string(8) "kofeina"
[1]=>
string(5) "brązowa"
[0]=>
string(6) "kawa"
}
One thing to note here is that if you define the array earlier, e.g.:
$a = [0, 0, 0];
the indexes will be kept in the correct order:
array(3) {
[0]=>
string(4) "kawa"
[1]=>
string(8) "brązowa"
[2]=>
string(7) "kofeina"
}
Thought that it was worth mentioning.As noted, list() will give an error if the input array is too short. This can be avoided by array_merge()'ing in some default values. For example:
<?php
$parameter = 'name';
list( $a, $b ) = array_merge( explode( '=', $parameter ), array( true ) );
?>
However, you will have to array_merge with an array long enough to ensure there are enough elements (if $parameter is empty, the code above would still error).
An alternate approach would be to use array_pad on the array to ensure its length (if all the defaults you need to add are the same).
<?php
$parameter = 'bob-12345';
list( $name, $id, $fav_color, $age ) = array_pad( explode( '-', $parameter ), 4, '' );
var_dump($name, $id, $fav_color, $age);
/* outputs
string(3) "bob"
string(5) "12345"
string(0) ""
string(0) ""
*/
?>The example states the following:
<?php
// list() doesn't work with strings
list($bar) = "abcde";
var_dump($bar);
// output: NULL
?>
If the string is in a variable however, it seems using list() will treat the string as an array:
<?php
$string = "abcde";
list($foo) = $string;
var_dump($foo);
// output: string(1) "a"
?><?php
/**
* It seems you can skip listed values.
* Here's an example to show what I mean.
*
* FYI works just as well with PHP 7.1 shorthand list syntax.
* Tested against PHP 5.6.30, 7.1.5
*/
$a = [ 1, 2, 3, 4 ];
// this is quite normal use case for list
echo "Unpack all values\n";
list($v1, $v2, $v3, $v4) = $a;
echo "$v1, $v2, $v3, $v4\n";
unset($v1, $v2, $v3, $v4);
// this is what I mean:
echo "Skip middle\n";
list($v1, , , $v4) = $a;
echo "$v1, $v2, $v3, $v4\n";
unset($v1, $v2, $v3, $v4);
echo "Skip beginning\n";
list( , , $v3, $v4) = $a;
echo "$v1, $v2, $v3, $v4\n";
unset($v1, $v2, $v3, $v4);
echo "Skip end\n";
list($v1, $v2, , ) = $a;
echo "$v1, $v2, $v3, $v4\n";
unset($v1, $v2, $v3, $v4);
echo "Leave middle\n";
list( , $v2, $v3, ) = $a;
echo "$v1, $v2, $v3, $v4\n";
unset($v1, $v2, $v3, $v4);It can be convenient to specify a default value in case an element is missing in the list. You can use operator + for this:
<?php
$someArray = ['color' => 'orange'];
['color' => $color, 'size' => $size] = $someArray + ['color' => null, 'size' => null];
?>
This will avoid the warning `Undefined array key "size"` you would encounter otherwise.list() can be used with foreach
<?php
$array = [[1, 2], [3, 4], [5, 6]];
foreach($array as list($odd, $even)){
echo "$odd is odd; $even is even", PHP_EOL;
}
?>
The output:
===
1 is odd; 2 is even
3 is odd; 4 is even
5 is odd; 6 is evenThe list construct seems to look for a sequential list of indexes rather taking elements in sequence. What that obscure statement means is that if you unset an element, list will not simply jump to the next element and assign that to the variable but will treat the missing element as a null or empty variable:
$test = array("a","b","c","d");
unset($test[1]);
list($a,$b,$c)=$test;
print "\$a='$a' \$b='$b' \$c='$c'<BR>";
results in:
$a='a' $b='' $c='c'
not:
$a='a' $b='c' $c='d'Don't miss simple array pattern matching since php 7
<?php
[$a] = ['hello!'];
var_dump($a); // 'hello!'
$arr = [4 => 50];
[4 => $fifty] = $arr;
var_dump($fifty); // 50
$multidimensionalArray = [['id' => 15, 'email' => 'diyor024@gmail.com']];
[['id' => $id, 'email' => $email]] = $multidimensionalArray;
var_dump($id, $email); // 15 diyor024@gmail.com
?>Setting it like <?php list($var1,$varN) = null ?> does _not_ raise an E_NOTICE (or other error) and afaics effectively equals an https://php.net/function.unset of $var1,$varN.
I note this as contrasting with the fact that PHP triggers an E_NOTICE about "Undefined offset" "if there aren't enough array elements to fill the list()", as attow documented for https://php.net/control-structures.foreach#control-structures.foreach.list and here only noted in https://php.net/function.list#122951 by Mardaneus.
For completeness, a bash(1) (v5.0 or 4.3 on macos10.13) cli test producing the same result for all my PHP-versions (installed via macports.org) follows. It's also tested with php7.3 using bash5.0 on Debian10:
bash --noprofile --norc -c 'for php in php{{53..56},{70..73}};do for literal in "array()" null;do echo -n $php …=$literal:&&$php -n -d error_reporting=E_ALL -r "var_dump(list(\$var)=$literal);";done;done'
# Above produces the same result pairs per version from:
php53 …=array():
Notice: Undefined offset: 0 in Command line code on line 1
array(0) {
}
# ... to:
php73 …=null:NULLThe list() definition won't throw an error if your array is longer then defined list.
<?php
list($a, $b, $c) = array("a", "b", "c", "d");
var_dump($a); // a
var_dump($b); // b
var_dump($c); // c
?>For PHP 7.1 on, the documentation states that integer and string keys can be mixed, but that elements with and without keys cannot. Here is an example, using data from getimagesize() with mixed keys:
<?php
$data=[
0=> 160,
1 => 120,
2 => 2,
3 => 'width="160" height="120"',
'mime' => 'image/jpeg'
];
list(0=>$width,1=>$height,2=>$type,3=>$dimensions,'mime'=>$mime)=$data;
?>
Here, the numeric keys also need to be specified, as if the whole array is treated as an associative array.
As noted elsewhere, the list() operator can be written in array format:
<?php
[0=>$width,1=>$height,2=>$type,3=>$dimensions,'mime'=>$mime]=$data;
?>This is something I haven't seen in documentation.
Since PHP 7.1, you can use short-hand list unpacking using square brackets, just like short-hand array declaration:
<?php
$foo = ['a', 'b', 'c'];
// short-hand array definition
[$a, $b, $c] = $foo;
echo $a; // displays "a"
// it's same like:
list($x, $y, $z) = $foo;
echo $x; // displays "a"
?>list($a, $b, $c) = ["blue", "money", 32];
shortcut:
[$a, $b, $c] = ["blue", "money", 32];From PHP Version 7.1 you can specify keys in list(), or its new shorthand [] syntax. This enables destructuring of arrays with non-integer or non-sequential keys.
<?php
$data = [
["id" => 1, "name" => 'Tom'],
["id" => 2, "name" => 'Fred'],
];
// list() style
list("id" => $id1, "name" => $name1) = $data[0];
// [] style
["id" => $id1, "name" => $name1] = $data[0];
// list() style
foreach ($data as list("id" => $id, "name" => $name)) {
// logic here with $id and $name
}
// [] style
foreach ($data as ["id" => $id, "name" => $name]) {
// logic here with $id and $name
}Since 7.1.0, you can use an array directly without list():
<?php
[$test, $test2] = explode(",", "hello, world");
echo $test . $test2; // hello, world
?>a simple example of use to swap two variables :
$a = 'hello';
$b = 'world';
list($a, $b) = [$b, $a];
echo $a . ' ' . $b; //display "world hello"
another example :
function getPosition($x, $y, $z)
{
// ... some operations like $x++...
return [$x, $y, $z];
}
list($x, $y, $z) = getPosition($x ,$y, $z);Since PHP 7.1 the [] may now be used as an alternative to the existing list() syntax:
<?php
[$number, $message] = explode('|', '123|Hello World!');
?>If you want use the undefined behaviour as you might expect it e.g. if you want:
$b = ['a','b']; list($a, $b) = $b;
to result in $a=='a' and $b=='b', then you can just cast $b to an array (even although it already is) to create a copy. e.g.
$b = ['a','b']; list($a, $b) = (array)$b;
and get the expected results.... and it also supports pushing items onto arrays.
I couldn't find any official documentation on this behavior, but it appears that you can "push" elements onto arrays directly using array destructuring assignments.
<?php
$users = [
[1, 'Alice', 'alice@example.com', 'secret123'],
[2, 'Bob', 'bob@example.com', 'pass456'],
[3, 'Charlie', 'charlie@example.com', 'hunter678'],
];
$ids = [];
$names = [];
$emails = [];
$passwords = [];
foreach ($users as $user) {
[$ids[], $names[], $emails[], $passwords[]] = $user;
}
?>
For well-documented alternatives, consider using array_column(), which does quite the same:
<?php
$ids = array_column($users, 0);
$names = array_column($users, 1);
$emails = array_column($users, 2);
$passwords = array_column($users, 3);
?>Unless you specify keys when using list() it expects the array being fed into it to start at 0.
So having the following code will result in a notice level warning "Undefined offset: 0" and variables not filling as expected
<?php
list($c1, $c2, $c3) = array [1 =>'a', 2 => 'b', 3 => 'c'];
var_dump($c1); // NULL
var_dump($c2); // string(1) "a"
var_dump($c3); // string(1) "b"
?>UNDOCUMENTED BEHAVIOR:
list($a,$b,$c) = null;
in fact works like:
$a = null; $b = null; $c = null;
...So correspondingly:
list($rows[]) = null;
Will increment count($rows), just as if you had executed $rows[] = null;
Watch out for this (for example) when retrieving entire tables from a database, e.g.
while (list($rows[]) = $mysqlresult->fetch_row());
This will leave an extra 'null' entry as the last element of $rows.Easy way to get actual date and time values in variables.
list($day,$month,$year,$hour,$minute,$second) = explode('-',date('d-m-Y-G-i-s'));
echo "$day-$month-$year $hour".":".$minute.":".$second;