Pool::collect

(PECL pthreads >= 2.0.0)

Pool::collect — Collect references to completed tasks

説明

public Pool::collect(Callable $collector = ?): int

Allows the pool to collect references determined to be garbage by the optionally given collector.

パラメータ

collector: A Callable collector that returns a boolean on whether the task can be collected or not. Only in rare cases should a custom collector need to be used.

戻り値

The number of remaining tasks in the pool to be collected.

変更履歴

バージョン	説明
PECL pthreads 3.0.0	An integer is now returned, and the `collector` parameter is now optional.

例

例1 A basic example of Pool::collect()

<?php
$pool = new Pool(4);

for ($i = 0; $i < 15; ++$i) {
    $pool->submit(new class extends Threaded {});
}

while ($pool->collect()); // blocks until all tasks have finished executing

$pool->shutdown();

Improve This Page

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 4 notes

down

meadowsjared at gmail dot com ¶

3 years ago

In this example, it shows how to use a Threaded with a pool to get an array of results, using pThreads v3.2.1 and php 7.3.23

<?php
class TestWork extends Threaded {
//updated version that works with pThreads v3.2.1 and php 7.3.23
    protected $complete;
    //$pData is the data sent to your worker thread to do it's job.
    public function __construct($pData) {
        //transfer all the variables to local variables
        $this->complete = false;
        $this->testData = $pData;
    }
    //This is where all of your work will be done.
    public function run() {
        usleep(2000000); //sleep 2 seconds to simulate a large job
        $this->complete = true;
    }
    public function isDone() {
        return $this->complete;
    }
}
class ExamplePool extends Pool {
    public $data = array(); // used to return data after we're done
    private $numTasks = 0; // counter used to know when we're done
    /**
     * override the submit function from the parent
     * to keep track of our jobs
     */
    public function submit(Threaded $task) {
        $this->numTasks++;
        parent::submit($task);
    }
    /**
     * used to wait until all workers are done
     */
    public function process() {
        // Run this loop as long as we have
        // jobs in the pool
        while (count($this->data) < $this->numTasks) {
            $this->collect(function (TestWork $task) {
                // If a task was marked as done, collect its results
                if ($task->isDone()) {
                    $tmpObj = new stdclass();
                    $tmpObj->complete = $task->complete;
                    //this is how you get your completed data back out [accessed by $pool->process()]
                    $this->data[] = $tmpObj;
                }
                return $task->isDone();
            });
        }
        // All jobs are done
        // we can shutdown the pool
        $this->shutdown();
        return $this->data;
    }
}
$pool = new ExamplePool(3);
$testData = 'asdf';
for($i=0;$i<5;$i++) {
    $pool->submit(new TestWork($testData));
}
$retArr = $pool->process(); //get all of the results
echo '<pre>';
print_r($retArr); //return the array of results (and maybe errors)
echo '</pre>';
?>

down

your dot brother dot t at hotmail dot com ¶

9 years ago

The example code crashes and made me waste 2 working days
First of all, `Stackable` has no attribute named $worker or it's access method made it inaccessible.

Secondly, `Stackable` also doesn't have `getThreadId()` . It's best practice to use `Thread` class for realization of a thread since it has more control functions. It's better to use `Stackable` for object storage and use it's `run()` as its initialization.

The working example is

<?php
    class MyWork extends Thread {
        protected $complete;

        public function __construct() {
            $this->complete = false;
        }

        public function run() {
            printf(
                "Hello from %s in Thread #%lu\n",
                __CLASS__, $this->getThreadId());
            $this->complete = true;
        }

        public function isComplete() {
            return $this->complete;
        }
    }

    class Something {}

    class MyWorker extends Worker {

        public function __construct(Something $something) {
            $this->something = $something;
        }

        public function run() {
            /** ... **/
        }
    }

    $pool = new Pool(8, \MyWorker::class, [new Something()]);
    $pool->submit(new MyWork());

    usleep(1000);

    $pool->collect(function($work){
        return $work->isComplete();
    });
    var_dump($pool);
?>

down

meadowsjared at gmail dot com ¶

8 years ago

Please note, when using the collect function, it's important that you extend the pool class so you can keep checking for finished threads until they're all done.

<?php
class TestWork extends Threaded {
    protected $complete;
    //$pData is the data sent to your worker thread to do it's job.
    public function __construct($pData){
        //transfer all the variables to local variables
        $this->complete = false;
        $this->testData = $pData;
    }
    //This is where all of your work will be done.
    public function run(){
        usleep(2000000); //sleep 2 seconds to simulate a large job
        $this->complete = true;
    }
    public function isGarbage() {
        return $this->complete;
    }
}
class ExamplePool extends Pool
{
    public $data = array();
    public function process()
    {
        // Run this loop as long as we have
        // jobs in the pool
        while (count($this->work)) {
            $this->collect(function (TestWork $task) {
                // If a task was marked as done
                // collect its results
                if ($task->isGarbage()) {
                    $tmpObj = new stdclass();
                    $tmpObj->complete = $task->complete;
                    //this is how you get your completed data back out [accessed by $pool->process()]
                    $this->data[] = $tmpObj;
                }
                return $task->isGarbage();
            });
        }
        // All jobs are done
        // we can shutdown the pool
        $this->shutdown();
        return $this->data;
    }
}
$pool = new ExamplePool(3);
$testData = 'asdf';
for($i=0;$i<5;$i++) {
    $pool->submit(new TestWork($testData));
}
$retArr = $pool->process(); //get all of the results
echo '<pre>';
print_r($retArr); //return the array of results (and maybe errors)
echo '</pre>';
?>

down

l00k at protonmail dot com ¶

6 years ago

This example demonstrates various aspects of MTP with pthreads - esspecially worth of note is bidirectional communication with child threads.
I could not find anything about that so I would like to present you my research result.

<?php

class Model
{
    
    public $id;
    public $value;
    
}

class Connection
    extends Worker
{
    
    protected static $link;
    
    
    public function __construct($hostname, $username, $password, $database, $port = 3306)
    {
        $this->hostname = $hostname;
        $this->username = $username;
        $this->password = $password;
        $this->database = $database;
        $this->port = $port;
    }
    
    public function getConnection()
    {
        if(!self::$link)
        {
            echo 'Thread: '. $this->getThreadId() ." Connecting to db\n";
            self::$link = new \PDO(...);
        }
        
        return self::$link;
    }
    
}

/** @property Connection $worker */
class QueryTask
    extends Threaded
{
    
    public $data;
    public $result;
    
    protected $_complete;
    
    
    public function __construct(Model $data)
    {
        $this->_complete = false;
        $this->data = $data;
    }
    
    public function run()
    {
        /** @var \PDO $pdo */
        $pdo = $this->worker->getConnection();
        
        $text = 'Thread: '. $this->worker->getThreadId() .' Job: '. $this->data->id .' Data: '. $this->data->value;
        
        $t = microtime(true);
        
        $stmt = $pdo->prepare("
            INSERT INTO `test` (`id`, `text`) VALUES (NULL, '". $text ."')
        ");
        $stmt->execute();
        
        $dt = microtime(true) - $t;
        
        $result = (int) $stmt->rowCount();
        
        echo $text .' Result: '. $result .' Exec time: '. $dt ."s\n";
        
        $this->result = $result;
        $this->_complete = true;
    }
    
    public function isGarbage() : bool
    {
        return $this->_complete;
    }
    
}

$t = microtime(true);

// uruchomienie
$pool = new Pool(5, 'Connection', [ 'localhost', 'root', 'password', 'test' ]);

// zadania
$tasks = 10;

for($i=0; $i<$tasks; ++$i)
{
    $object = new Model();
    $object->id = $i;
    $object->value = rand();

    $pool->submit(new QueryTask($object));
}

// oczekiwanie na zakonczenie
$data = [];

while(1)
{
    $newData = [];

    $pool->collect(function(QueryTask $task) use (&$newData) {
        if($task->isGarbage())
        {
            $tmpObj = new stdclass();
            $tmpObj->complete = $task->complete;
            
            $newData[ $task->data->id ] = $task->data->value;
        }
        
        return $task->isGarbage();
    });
    
    $data = array_merge($data, $newData);
    
    if(count($data) == $tasks)
        break;
    
    usleep(100000);
}

var_dump($data);
?>

Result:
Thread: 6796 Connecting to db
Thread: 3156 Connecting to db
Thread: 9040 Connecting to db
Thread: 7748 Connecting to db
Thread: 8836 Connecting to db
Job: 0 Done in: 0.0070011615753174s
Job: 4 Done in: 0.0069999694824219s
Job: 2 Done in: 0.0090010166168213s
Job: 3 Done in: 0.0090010166168213s
Job: 1 Done in: 0.003000020980835s
Job: 5 Done in: 0.0069999694824219s
Job: 7 Done in: 0.0079998970031738s
Job: 6 Done in: 0.0049998760223389s
Job: 9 Done in: 0.0079998970031738s
Job: 8 Done in: 0.0069999694824219s

array(10) {
  [0] =>
  int(17730)
  [1] =>
  int(18771)
  [2] =>
  int(12944)
  [3] =>
  int(6025)
  [4] =>
  int(29582)
  [5] =>
  int(10159)
  [6] =>
  int(26556)
  [7] =>
  int(9029)
  [8] =>
  int(15002)
  [9] =>
  int(4043)
}

Things worth noting here:
1. Constructing of 5 workers for 10 tasks. 5 last task are runned on existing threads with already set up connection to db.
2. You can "send" data to thread by creating new task and submiting it.
3. You can retrive result by collect function.
4. You can pass simple object to task constructor.

＋add a note