ssh2_connect

Due to a lack of complete examples, here's a simple SSH2 class for connecting to a server, authenticating with public key authentication, verifying the server's fingerprint, issuing commands and reading their STDOUT and properly disconnecting.  Note: You may need to make sure you commands produce output so the response can be pulled.  Some people suggest that the command is not executed until you pull the response back.
<?php
class NiceSSH {
    // SSH Host
    private $ssh_host = 'myserver.example.com';
    // SSH Port
    private $ssh_port = 22;
    // SSH Server Fingerprint
    private $ssh_server_fp = 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx';
    // SSH Username
    private $ssh_auth_user = 'username';
    // SSH Public Key File
    private $ssh_auth_pub = '/home/username/.ssh/id_rsa.pub';
    // SSH Private Key File
    private $ssh_auth_priv = '/home/username/.ssh/id_rsa';
    // SSH Private Key Passphrase (null == no passphrase)
    private $ssh_auth_pass;
    // SSH Connection
    private $connection;
    
    public function connect() {
        if (!($this->connection = ssh2_connect($this->ssh_host, $this->ssh_port))) {
            throw new Exception('Cannot connect to server');
        }
        $fingerprint = ssh2_fingerprint($this->connection, SSH2_FINGERPRINT_MD5 | SSH2_FINGERPRINT_HEX);
        if (strcmp($this->ssh_server_fp, $fingerprint) !== 0) {
            throw new Exception('Unable to verify server identity!');
        }
        if (!ssh2_auth_pubkey_file($this->connection, $this->ssh_auth_user, $this->ssh_auth_pub, $this->ssh_auth_priv, $this->ssh_auth_pass)) {
            throw new Exception('Autentication rejected by server');
        }
    }
    public function exec($cmd) {
        if (!($stream = ssh2_exec($this->connection, $cmd))) {
            throw new Exception('SSH command failed');
        }
        stream_set_blocking($stream, true);
        $data = "";
        while ($buf = fread($stream, 4096)) {
            $data .= $buf;
        }
        fclose($stream);
        return $data;
    }
    public function disconnect() {
        $this->exec('echo "EXITING" && exit;');
        $this->connection = null;
    }
    public function __destruct() {
        $this->disconnect();
    }
}
?>

[EDIT BY danbrown AT php DOT net: Contains two bugfixes suggested by 'AlainC' in user note #109185 (removed) on 26-JUN-2012.]

Be careful when providing a specific hostkey order. <?phpssh2_connect('IP', 'port', array('hostkey'=>'ssh-rsa, ssh-dss'));?>Will only work when the public key of the server is RSA, and not DSA also as expected. This is caused by the empty space before the "ssh-dss". So a similar code:<?phpssh2_connect('IP', 'port',   array('hostkey'=>'ssh-rsa,ssh-dss'));?>Will work. The HOSTKEY method is overriden using exactly what you write, so no empty spaces are allowed.This took me some time that you could save ;)

This page is out of date.  Any of the SHA-1 in the Key Exchange Methods in the kex section should be discarded, due to Logjam (https://weakdh.org/logjam.html).  If you continue to use them, connects will result in the following warning: "Warning: ssh2_connect(): Error starting up SSH connection(-5): Unable to exchange encryption keys in ..."The following is an example of what works.  Also by removing the 'hex' section all together, results in libssl (https://libssh2.org/) falling back to discovering which is the strongest cipher to authenticate with. <?phpif (!function_exists("ssh2_connect")) die("function ssh2_connect doesn't exist");function ssh2_debug($message, $language, $always_display) {   printf("%s %s %s\n",$message,$language,$always_display);}/* Notify the user if the server terminates the connection */function my_ssh_disconnect($reason, $message, $language) {  printf("Server disconnected with reason code [%d] and message: %s\n", $reason, $message);}$methods = array(    'hostkey'=>'ssh-rsa,ssh-dss',//    'kex' => 'diffie-hellman-group-exchange-sha256',    'client_to_server' => array(        'crypt' => 'aes256-ctr,aes192-ctr,aes128-ctr,aes256-cbc,aes192-cbc,aes128-cbc,3des-cbc,blowfish-cbc',        'comp' => 'none'),    'server_to_client' => array(        'crypt' => 'aes256-ctr,aes192-ctr,aes128-ctr,aes256-cbc,aes192-cbc,aes128-cbc,3des-cbc,blowfish-cbc',        'comp' => 'none'));        $callbacks = array('disconnect' => 'my_ssh_disconnect');foreach (array('192.168.1.1') as $host) {  $connection = ssh2_connect($host, 22, $methods, $callbacks);  if (!$connection) die("Connection failed:");  ssh2_auth_password($connection, 'user', 'my_password') or die("Unable to authenticate");  $stream = ssh2_exec($connection, 'free -m');  stream_set_blocking($stream, true);  $stream_out = ssh2_fetch_stream($stream, SSH2_STREAM_STDIO);  echo stream_get_contents($stream_out);}?>

Trying to include "aes256-cbc" in the encryption methods list caused an error. The documentation here may be out of date, and you might find a more accurate list of what values are acceptable by checking the libssh2 documentation at libssh2.org.

Usage of 'hostkey' option makes sence when you need to check authenticity of the remote server, e.g. by means of ssh2_fingerprint function. For that purpose you specify a list of possible algorithms sorted by priority in descending order. Supported values also include 'ssh-ed25519', 'ecdsa-sha2-nistp256', 'ecdsa-sha2-nistp384' and 'ecdsa-sha2-nistp521'.For instance:<?php$ssh = ssh2_connect('192.168.3.1', 22, ['hostkey' => 'ssh-ed25519,ssh-rsa']);$md5 = ssh2_fingerprint($ssh); // returns MD5 hash of ED25519 host key, or MD5 hash of RSA key if the key of previous type is absent?>Note, if the remote server does not have a key of appropriate type connection will fail:<?php$ssh = ssh2_connect('192.168.3.1', 22, ['hostkey' => 'ssh-dss']);PHP Warning:  ssh2_connect(): Error starting up SSH connection(-5): Unable to exchange encryption keys in php shell code on line 1PHP Warning:  ssh2_connect(): Unable to connect to 192.168.3.1 in php shell code on line 1?>

Hi,If you are having problems with running a ssh2 session and it waits forever during the execution of stream_get_contents, it might be because the remote system has run the command and is now sitting at a # prompt waiting for the next command.  I had this issue on a HP MSA box, here is the code to get around the issue.Assuming you are connected with your authentication method and $ssh contains the handle.<?php$command = "check disk";// Open a nice large window to stop wrapping$stream = ssh2_shell ($ssh, 'xterm', null, 200, 200, SSH2_TERM_UNIT_CHARS); // Hook into the error stream$errorStream = ssh2_fetch_stream($stream, SSH2_STREAM_STDERR);  // Block the streams so we wait until they completestream_set_blocking ($stream, true);stream_set_blocking($errorStream, true);// Send the commands to the terminalfwrite ($stream, $command . PHP_EOL );// Wait give the terminal a chance to accept and start processing the command, this is a slow storage device after allsleep(2);// IMPORTANT BIT!!  Send exit to the terminal to close the connection BEFORE WE WAIT FOR THE STREAMfwrite ($stream, "exit" . PHP_EOL );sleep (2);// Print the outputecho stream_get_contents($stream);$errortext=stream_get_contents($errorStream);if (strlen($errortext) > 0) {          // Error Data         echo "Error Data: $errortext";         exit (1);}// All Goodexit (0);?>You can't use ssh2_exec with this method (well at lease I couldn't) because on executing the first command the stream gets blocked and then you can't run the exit command, whereas a terminal seems to use one session.I hope this helps someone.

With Sara's help, I have the following SS2 class that is quite flexible. If anyone improves it, please feel free to let me know.<?php// ssh protocols// note: once openShell method is used, cmdExec does not workclass ssh2 {  private $host = 'host';  private $user = 'user';  private $port = '22';  private $password = 'password';  private $con = null;  private $shell_type = 'xterm';  private $shell = null;  private $log = '';  function __construct($host='', $port=''  ) {     if( $host!='' ) $this->host  = $host;     if( $port!='' ) $this->port  = $port;     $this->con  = ssh2_connect($this->host, $this->port);     if( !$this->con ) {       $this->log .= "Connection failed !";      }  }  function authPassword( $user = '', $password = '' ) {     if( $user!='' ) $this->user  = $user;     if( $password!='' ) $this->password  = $password;     if( !ssh2_auth_password( $this->con, $this->user, $this->password ) ) {       $this->log .= "Authorization failed !";      }  }  function openShell( $shell_type = '' ) {        if ( $shell_type != '' ) $this->shell_type = $shell_type;    $this->shell = ssh2_shell( $this->con,  $this->shell_type );    if( !$this->shell ) $this->log .= " Shell connection failed !";  }  function writeShell( $command = '' ) {    fwrite($this->shell, $command."\n");  }  function cmdExec( ) {        $argc = func_num_args();        $argv = func_get_args();    $cmd = '';    for( $i=0; $i<$argc ; $i++) {        if( $i != ($argc-1) ) {          $cmd .= $argv[$i]." && ";        }else{          $cmd .= $argv[$i];        }    }    echo $cmd;        $stream = ssh2_exec( $this->con, $cmd );    stream_set_blocking( $stream, true );    return fread( $stream, 4096 );  }  function getLog() {     return $this->log;   }}?>

Warning! If you open a ssh connection and execute an external program opening another ssh connection it may result in very strange behavior.I used an sftp connection to get a file list and used "exec" to download the files afterwards with an external sftp. lftp downloaded zeros with no comment, psftp exits with error code 11 most of the time, but sometimes it works - probably depending on how quickly php collects garbage and closes the unused connection first.As there is no function to close a connection, you need to be sure to destroy all references (unset) to close it.