Nginx 1.4.x em sistemas Unix

Esta documentação cobrirá a instalação e configuração do PHP com PHP-FPM para um servidor HTTP Nginx 1.4.x.

Este guia assumirá que o Nginx foi construído a partir da fonte e portanto todos os binários e arquivos de configuração estão localizados em /usr/local/nginx. Se não for este o caso e o Nginx foi obtido de outro modo então favor se referir à » Wiki Nginx para traduzir este manual para a sua configuração.

Este guia cobrirá o básico da configuração de um servidor Nginx para processar aplicações PHP e servi-las na porta 80. Recomenda-se que a documentação do Nginx e do PHP-FPM seja estudada se for desejado otimizar a configuração além do escopo deste documentação.

Favor notar que, ao longo desta documentação, números de versões foram trocados por um 'x' para assegurar que a informação se mantenha correta no futuro. Favor trocar, conforme necessário, com os números das versões correspondentes.

  1. Recomenda-se a visita à página de » instalação da Wiki Nginx para obter e instalar o Nginx no seu sistema.

  2. Obtenha e descompacte a fonte do PHP:

    tar zxf php-x.x.x
    
  3. Configure e construa o PHP. Aqui é onde o PHP é customizado com várias opções, como quais extensões serão habilitadas. Execute ./configure --help para uma lista de opções disponíveis. No nosso exemplo faremos uma configuração simples com PHP-FPM e suporte MySQLi.

    cd ../php-x.x.x
    ./configure --enable-fpm --with-mysqli
    make
    sudo make install
    
  4. Obtenha e mova os arquivos de configuração para suas localizações corretas

    cp php.ini-development /usr/local/php/php.ini
    cp /usr/local/etc/php-fpm.d/www.conf.default /usr/local/etc/php-fpm.d/www.conf
    cp sapi/fpm/php-fpm /usr/local/bin
    
  5. É importante evitar que o Nginx passe requisições ao processo interno do PHP-FPM se o arquivo não existe, fazendo com que se impeça injeção arbitrária de script.

    Isto pode ser feito configurando-se a diretiva cgi.fix_pathinfo para 0 no arquivo php.ini.

    Abra o php.ini:

    vim /usr/local/php/php.ini
    

    Localiza cgi.fix_pathinfo= e modifique como a seguir:

    cgi.fix_pathinfo=0
    
  6. php-fpm.conf deve ser modificado para especificar que o php-fpm deve rodar como o usuário www-data e o grupo www-data antes do serviço ser iniciado:

    vim /usr/local/etc/php-fpm.d/www.conf
    

    Ecnontre e modifique o seguinte:

    ; Usuário/grupo de processos Unix
    ; Nota: O usuário é mandatório. Se o grupo não for definido, o grupo padrão do usuário
    ;       será usado.
    user = www-data
    group = www-data
    

    O serviço php-fpm pode agora ser iniciado:

    /usr/local/bin/php-fpm
    

    Este guia não irá configurar o php-fpm além disso, se houver interesse em configuração adicional do php-fpm favor consultar a documentação.

  7. Nginx agora deve ser configurado para suportar o processamento de aplicações PHP:

    vim /usr/local/nginx/conf/nginx.conf
    

    Modifique o bloco de localização padrão para avisar que ele deve tentar servir arquivos .php:

    location / {
        root   html;
        index  index.php index.html index.htm;
    }

    O próximo passo é assegurar que os arquivos .php são passados ao processo interno do PHP-FPM. Abaixo do bloco comentado de localização padrão do PHP, entre com o seguinte:

    location ~* \.php$ {
        fastcgi_index   index.php;
        fastcgi_pass    127.0.0.1:9000;
        include         fastcgi_params;
        fastcgi_param   SCRIPT_FILENAME    $document_root$fastcgi_script_name;
        fastcgi_param   SCRIPT_NAME        $fastcgi_script_name;
    }

    Reinicie o Nginx.

    sudo /usr/local/nginx/sbin/nginx -s stop
    sudo /usr/local/nginx/sbin/nginx
    
  8. Crie um arquivo de teste

    rm /usr/local/nginx/html/index.html
    echo "<?php phpinfo(); ?>" >> /usr/local/nginx/html/index.php
    

    Agora navegue até http://localhost. A informação de phpinfo() agora deve ser mostrada.

Ao seguir os passos acima o servidor web Nginx será executado com suporte para PHP como um módulo SAPI FPM. Obviamente existem muitas opções de configurações adicionaism disponíveis para Nginx e PHP. Para mais informação digite ./configure --help na pasta correspondente a cada fonte.

adicione uma nota

Notas Enviadas por Usuários (em inglês) 8 notes

up
41
Lenny
9 years ago
Building from source is not easy if something is a bit different, and I had a hard time with some directory and configuration options. I was floundering around the web until I found this site that translated from Chinese. No one else had the solution.  I couldn't get php fpm to start until I changed the directory (Item 2.ERROR: Unable to globalize). I had other issues listed but I was able to solve them. Please don't delete this, it is very useful info.The original site  (it is in Chinese, not my site, but I want to give credit):(there is some more there, you can goto the site)blog.dream1987.top/?paged=2Installation problems:1. configure: error:. Xml2-config not found Please check your libxml2 installation.solution:apt-get install libxml2-dev 2.Warning: Declaration of PEAR_Installer :: download () should be compatible with & PEAR_Downloader :: download ($ params) in phar: ///root/php-7.0.0alpha1/pear/install-pear-nozlib.phar/PEAR /Installer.php on line 43Warning: Declaration of PEAR_PackageFile_Parser_v2 :: parse () should be compatible with PEAR_XMLParser :: parse ($ data) in phar: ///root/php-7.0.0alpha1/pear/install-pear-nozlib.phar/PEAR/PackageFile/ Parser / v2.php on line 113 [PEAR] Archive_Tar - already installed: 1.3.13 [PEAR] Console_Getopt - already installed: 1.3.1 [PEAR] Structures_Graph- already installed: 1.0.4Warning: Declaration of PEAR_Task_Replace :: init () should be compatible with PEAR_Task_Common :: init ($ xml, $ fileAttributes, $ lastVersion) in phar: ///root/php-7.0.0alpha1/pear/install-pear-nozlib. phar / PEAR / Task / Replace.php on line 31 [PEAR] XML_Util - already installed: 1.2.3Warning: Declaration of PEAR_Task_Windowseol :: init () should be compatible with PEAR_Task_Common :: init ($ xml, $ fileAttributes, $ lastVersion) in phar: ///root/php-7.0.0alpha1/pear/install-pear-nozlib. phar / PEAR / Task / Windowseol.php on line 76Warning: Declaration of PEAR_Task_Unixeol :: init () should be compatible with PEAR_Task_Common :: init ($ xml, $ fileAttributes, $ lastVersion) in phar: ///root/php-7.0.0alpha1/pear/install-pear-nozlib. phar / PEAR / Task / Unixeol.php on line 76 [PEAR] PEAR - already installed: 1.9.5solution:Workaround not found (http://pear.php.net/bugs/bug.php?id=20554)3. Start php-fpm1.ERROR: failed to open configuration file '/usr/local/etc/php-fpm.conf': No such file or directory (2) ERROR: failed to load configuration file '/usr/local/etc/php-fpm.conf' ERROR: FPM initialization failedsolution:Php-fpm.conf copy files from the source file to that location.cp /root/php-7.0.0alpha1/sapi/fpm/php-fpm.conf /usr/local/etc/php-fpm.conf2.ERROR: Unable to globalize '/usr/local/NONE/etc/php-fpm.d/*.conf' (ret = 2) from /usr/local/etc/php-fpm.conf at line 125. ERROR: failed to load configuration file '/usr/local/etc/php-fpm.conf' ERROR: FPM initialization failedsolution:Edit /usr/local/etc/php-fpm.conf document introduced * .conf part, change to the correct path include = / usr / local / etc / php-fpm.d / *. ConfIf there is no /usr/local/etc/php-fpm.d directory, create the directory.3.WARNING: Nothing matches the include pattern '/usr/local/etc/php-fpm.d/*.conf' from /usr/local/etc/php-fpm.conf at line 125. ERROR:. No pool defined at least one pool section must be specified in config file ERROR: failed to post process the configuration ERROR: FPM initialization failedsolution:cp www.conf.default www.conf4.ERROR: [pool www] can not get gid for group 'nobody' ERROR: FPM initialization failedsolution:Www.conf open files, user and group users into nginx default settings, usually the default is www-data.
up
8
uanaoeng at outlook dot com
6 years ago
When I run the following command to start the php-fpm:/usr/local/bin/php-fpmI got the following error information:Unable to globalize '/usr/local/NONE/etc/php-fpm.d/*.conf' (ret=2) from /usr/local/etc/php-fpm.conf at line 143.To fix this error, do:change the string "include=NONE/etc/php-fpm.d/*.conf" to "include=etc/php-fpm.d/*.conf" in the file "/usr/local/etc/php-fpm.conf" with text editor.After that, I try to start the php-fpm again and got error information again:Nothing matches the include pattern '/usr/local/etc/php-fpm.d/*.conf' from /usr/local/etc/php-fpm.conf at line 143.To fix this error, do:cp /usr/local/etc/php-fpm.d/www.conf.default /usr/local/etc/php-fpm.d/www.conf
up
9
Leon Nguyen vnlab
4 years ago
To maximize the server performance with highest speed, with fewest resources, i have decided to compile PHP 8 manually from minimal Linux/Unix-based OS (my Linux distro is rpm-based packages) My system has successfully powered up by PHP 8.0.9 - with Opcache/JIT enabled & other several PHP extension module. Here is several experience that may save you several hours of research.1. Before step (3) - Configure and build PHP - to ensure that no errors occurs, you can refer to my prerequisites library. sudo dnf install \gcc gcc-c++ make cmake autoconfig \zlib zlib-devel pcre pcre-devel \libxml2-devel libxslt-devel \bzip2-devel curl-devel libzip-devel\sqlite-devel \systemd-devel \openssl-devel \libffi-devel \libpng libpng-devel libwebp libwebp-devel libjpeg libjpeg-devel libXpm libXpm-devel \freetype-devel \gmp-devel \libldb-devel \libc-client libc-client-devel \openldap openldap-devel \oniguruma oniguruma-devel \net-snmp-devel readline-devel unixODBC-devel \uw-imap uw-imap-devel uw-imap-static uw-imap-utils \libicu-devel \enchant2 enchant2-devel \gd gd-devel \libsodium libsodium-devel \libtidy libtidy-develYou may not receive error when issuing ./configure, make && make install. Even when you manually build your PHP extension package later. 2. At step 5 - before modifying php.ini - you may double-check whether the current PHP is reading which php.ini file by this commandphp -ini | grep php.ini # My result. It is different from tutorial. Configuration File (php.ini) Path => /usr/local/libLoaded Configuration File => /usr/local/lib/php.ini
up
2
timy.shark
3 years ago
Great effort for this tutorial, thanks a ton, here are my notes if may help anyone, considering default install on WSL2 containerNote: composer added for Laravel framework.These are NOT to be copy and pasted as it is, need to be selective as there are annotations beside some commands,Also I've commented # some of the defaults written by the original editor due to mismatch to my current environment.sha256sum  php-x.x.x.tar.gz => e847745fd66fc8c57fac993a609fefcded93fddccd225f0620a26bb5ae5753c3     tar zxf php-x.x.x    sudo apt install build-essential    sudo apt install -y composer nginx pkgconf libxml2-dev  libsqlite3-dev zlib1g-dev    cd php-x.x.x    ./configure --enable-fpm --with-mysqli <==Thank you for installing PHP.        make <== takes a while     sudo make test <== optional as recommended    sudo make install <= /usr/local/bin /usr/local/php    sudo cp php.ini-development /usr/local/lib/php.ini    sudo cp /usr/local/etc/php-fpm.d/www.conf.default /usr/local/etc/php-fpm.d/www.conf    sudo cp sapi/fpm/php-fpm /usr/local/bin    sudo vim /usr/local/php/php.ini <= cgi.fix_pathinfo=0    sudo vim /usr/local/etc/php-fpm.d/www.conf <= user=www-data group=www-data    sudo vim sapi/fpm/php-fpm.conf <= edit include=etc/php-fpm.d/*.conf  <- relative path    sudo cp sapi/fpm/php-fpm.conf /usr/local/etc    /usr/local/bin/php -v <= $PATH$ uses /usr/local/bin at first /usr/local/lib/php.ini    sudo /usr/local/bin/php-fpm <= start the service    sudo vim /etc/nginx/sites-available/default <= edit the following under server {}    location / {    #root   html;        #index  index.php index.html index.htm;}    location ~* \.php$ {    #fastcgi_index   index.php;    fastcgi_pass    127.0.0.1:9000;    include         fastcgi_params;    fastcgi_param   SCRIPT_FILENAME    $document_root$fastcgi_script_name;    fastcgi_param   SCRIPT_NAME        $fastcgi_script_name;}        *Restart nginx (root /var/www/html) if root path doesn't exist, default is: /usr/share/nginx/html    sudo nginx -t <= Test Nginx conf files    sudo service nginx reload    sudo service nginx stop    sudo service nginx start <= [OK]    php-fpm needs to be in a service, or kill process manually ps -aux | grep php-fpm ; kill <pid>
up
5
Akash Kumar Sharma
9 years ago
If you get "File not found" error then add "root ROOT_DIR_LOCATION" directive to PHP location block i.e. "location ~* \.php$ { }" , where ROOT_DIR_LOCATION is root directory like "/usr/share/nginx/html" .
up
2
nguyentienlong88 at gmail dot com
9 years ago
at step 3, after command "sudo make install"if there is problem with pear.php.net (https). Need to change this line (from https to http) in MakefilePEAR_INSTALLER_URL = http://pear.php.net/install-pear-nozlib.phar
up
3
1097625354 at qq dot com
6 years ago
cp php/php.ini-development        php/lib/php.inicp php/etc/php-fpm.conf.default       php/etc/php-fpm.confcp php/etc/php-fpm.d/www.conf.default     php/etc/php-fpm.d/www.conf
up
1
610010559 at qq dot com
5 years ago
in linux system, if you want to add php-fpm service to system service;  it is easy to do that, because php offer the relate shell script:after make and make install;enter the source code package sapi/fpm/init.d.php-fpm ; type the code in the linux system.  cp sapi/fpm/init.d.php-fpm  /etc/init.d/php-fpmthen you can use "php-fpm {start|stop|force-quit|restart|reload|status|configtest} "  command  to control your php-fpm program more convenient .
To Top