(PHP 5, PHP 7, PHP 8)
SoapClient::__soapCall — Chama uma função SOAP
$name,$args,$options = null,$inputHeaders = null,&$outputHeaders = null
Esta é uma função API de baixo nível usada para fazer uma chamada SOAP. Geralmente,
no modo WSDL, as funções SOAP podem ser chamadas como métodos do
Objeto SoapClient. Este método é útil em modo não WSDL
quando soapaction é desconhecido, uri
difere do padrão ou ao enviar e/ou receber cabeçalhos SOAP.
Em caso de erro, uma chamada para uma função SOAP pode fazer com que o PHP lance exceções ou retorne um Objeto SoapFault se as exceções estiverem desabilitadas. Para verificar se a chamada de função falhou ao capturar as exceções SoapFault, verifique o resultado com is_soap_fault().
nameO nome da função SOAP a ser chamada.
argsUm array dos argumentos a serem passados para a função. Isso pode ser um array ordenado ou associativo. Observe que a maioria dos servidores SOAP exigem nomes de parâmetros a serem fornecidos; nesse caso, este deve ser um array associativo.
optionsUm array associativo de opções a serem passadas ao cliente.
A opção location é a URL do serviço Web remoto.
A opção uri é o namespace de destino do serviço SOAP.
A opção soapaction é a ação a ser chamada.
inputHeadersUm array de cabeçalhos a serem enviados junto com a solicitação SOAP.
outputHeadersSe fornecido, esse array será preenchido com os cabeçalhos da resposta SOAP.
As funções SOAP podem retornar um ou vários valores. Se apenas um valor for retornado pela função SOAP, o valor de retorno será um escalar. Se vários valores forem retornados, um array associativo de parâmetros nomeados de saída são retornados em vez disso.
Em caso de erro, se o objeto SoapClient foi construído
com a opção exceptions definida como false,
um objeto SoapFault será retornado.
Exemplo #1 Exemplo de SoapClient::__soapCall()
<?php
$client = new SoapClient("some.wsdl");
$client->SomeFunction($a, $b, $c);
$client->__soapCall("SomeFunction", array($a, $b, $c));
$client->__soapCall("SomeFunction", array($a, $b, $c), NULL,
new SoapHeader(), $output_headers);
$client = new SoapClient(null, array('location' => "http://localhost/soap.php",
'uri' => "http://test-uri/"));
$client->SomeFunction($a, $b, $c);
$client->__soapCall("SomeFunction", array($a, $b, $c));
$client->__soapCall("SomeFunction", array($a, $b, $c),
array('soapaction' => 'some_action',
'uri' => 'some_uri'));
?>
Note that calling __soapCall and calling the generated method from WSDL requires specifying parameters in two different ways.
For example, if you have a web service with method login that takes username and password, you can call it the following way:
<?php
$params = array('username'=>'name', 'password'=>'secret');
$client->login($params);
?>
If you want to call __soapCall, you must wrap the arguments in another array as follows:
<?php
$client->__soapCall('login', array($params));
?>Sharing my experience cuz i believe it is most important for you if you decide to use this Soap Client implementation.
At php 7.0.8 the stdClass generated by SoapClient from the response does not use "minOccurs" and "maxOccurs" WSDL modifiers to distinct properties in stdClass-es (aka keys in "associative arrays") and elements in arrays ("aka indexed arrays").
Instead, the implementation decides whether tag is _a key in associative array_ or _one of elements with same tag in indexed array_ by simply the fact whether there is just one element with such tag in the sequence or many.
Consider alive example from my case:
<?php
response xml:
...
<ValidatingCarrier>
<Alternate>AA</Alternate>
</ValidatingCarrier>
...
<ValidatingCarrier>
<Alternate>AA</Alternate>
<Alternate>AY</Alternate>
</ValidatingCarrier>
...
response structure generated by SoapClient:
...
[ValidatingCarrier] => stdClass Object(
[Alternate] => AA // here it is a string
)
...
[ValidatingCarrier] => stdClass Object (
[Alternate] => Array ( // and here this is an array
[0] => AA
[1] => AY
)
)
...
field XSD definition:
<xs:element name="Alternate" type="CarrierCode" minOccurs="0" maxOccurs="24">
?>
You see, the definition in XSD tells us this tag can be repeated up to 24 times, what means it would be an indexed array, but SoapClient does not take that into account and treats the first <Alternate> in example as a value instead of array containing this value.
Undoubtedly, a value should be a property in the stdClass (a key in associative array) _only_ when maxOccurs is 1 or less or not specified (default is 1, see https://www.w3.org/TR/xmlschema-0/#OccurrenceConstraints). Hope this info will be useful for you when you will be implementing your own, correctly working, SoapClient.One thing to note.
This happened to me and it took a while until I discovered what the problem was.
I was trying to get .NET objects from a provided web service, however it always seemed to return empty objects. It did return the backbone, but nothing within the objects that made up the structure.
Anyhow, it seems that you have to be very precise with the arrays when calling these functions. Par example, do this:
<?php
$obj = $client->__soapCall($SOAPCall, array('parameters'=>$SoapCallParameters));
?>
meaning that you must put an array as the second argument with 'parameters' as the key and the soap call parameters as the value.
Also make sure that the parameter variable, in my case $SoapCallParameters is in the form of what is requested by the webservice.
So, don't just make an array of the form:
<?php
(
[0] => 'Mary',
[1] => 1983
)
?>
but if the webservice requests a 'muid' variable as 'Mary' and a 'birthyear' as 1983, then make your array like this:
<?php
(
[muid] => 'Mary',
[birthyear] => 1983
)
?>
The above arrays refer to the $SoapCallParameters variable.
Hope this helps somebody, not having to spend too much time figuring out the problems.To avoid the SOAP client returning sometimes objects and sometimes arrays of objects, there's a setting:
$this->soapClient = new \SoapClient($wsdlUrl, array(
'features' => SOAP_SINGLE_ELEMENT_ARRAYS,
'trace' => DEBUG_SOAP
));Following OrionI's example:
<?php
$client = new SoapClient("http://server/sumservice.asmx?WSDL");
$params->a = 2;
$params->b = 3;
$objectresult = $client->Sum($params);
$simpleresult = $objectresult->SumResult;
print($simpleresult); //produces "-1"
?>
Please note that the lines:
"$client->Sum($params);"
and
"$simpleresult = $objectresult->SumResult;"
are based off of each other. If your web service function is called "Sum", then add "Result" to the end of it to get the results of the call.
EG:
<?php
$client = new SoapClient("http://server/mathservice.asmx?WSDL");
$params->a = 2;
$params->b = 3;
$objectresult = $client->Minus($params); // note the name of the function is "Minus"
$simpleresult = $objectresult->MinusResult; // note the name of the result is referenced as "MinusResult"
print($simpleresult); //produces "5"
?>I was working with SOAP for the first time and I had to create a client that sent a date range to a WSDL (Web Services Description Language) to return some information I needed. I didn't know how to pass the params and there really was no documentation about it. The main thing you have to make sure to do is when you pass params to a method that is definied by the WSDL that you are calling is that you use the same param name for the key of the array or the object variable as shown below. Also, if you don't know what the methods/functions that a WSDL has or the params that you need to pass it you can use the __getFunctions() and __getTypes() methods after you declare your new SoapClient.
<?php
// From and to are the two params that the execute function needs
// when called from the WSDL so make you to have them as the
// key to an array like below
$params["From"] = "06/01/2005"; // also can use $params->From = "date";
$params["to"] = "12/31/2005"; // also can use $params->to = "date";
$client = new SoapClient("some.wsdl");
try {
print($client->execute($params));
} catch (SoapFault $exception) {
echo $exception;
}
?>When calling over SOAP to a .NET application, you may end up with an object as a result instead of a simple type, even if you're just grabbing a simple type (like a boolean result). Use a property accessor to get the actual result, like this:
<?php
$client = new SoapClient("http://server/myservice.asmx?WSDL");
$objectresult = $client->MyMethod($param1, $param2);
$simpleresult = $objectresult->MyMethodResult;
?>
Note that .NET seems to name the result MethodNameResult for method MethodName.One little gotcha when passing the parameters where you need to have attributes and a simpletype value:
To get the xml
<foo bar="moo">cheese</foo>
You'd pass in:
<?php
array("foo" => array("_" => "cheese", "bar"=>"moo"));
?>
See that "_" bit? It really wasn't obvious from the documentation.Correction on the previously submitted code snippet...the incoming parameter for .NET also has to be in object or array form for it to be correctly converted to the XML form that .NET expects (as already mentioned by Llu?s P?mies). The full example (when using WSDL) should be like this:
<?php
$client = new SoapClient("http://server/myservice.asmx?WSDL");
$params->param1 = $value1;
$params->param2 = $value2;
$objectresult = $client->MyMethod($params);
$simpleresult = $objectresult->MyMethodResult;
?>
So if you have a C# function like this:
//sumservice.asmx
...
[WebMethod]
public int Sum(int a, int b)
{
return a + b;
}
...
The PHP client would be this:
<?php
$client = new SoapClient("http://server/sumservice.asmx?WSDL");
$params->a = 2;
$params->b = 3;
$objectresult = $client->Sum($params);
$simpleresult = $objectresult->SumResult;
print($simpleresult); //produces "5"
?>I am using SOAP call response headers to sign request results.
After alot of hours, I finally got the best way to get SOAP response headers (other than parsing __getLastResponse() witch requires trace option enabled) is using __soapCall() wrapper.
You can extend SoapClient class and wrap some functions to make sure you get the headers.
<?php
class API extends SoapClient
{
// ... Constructor, etc.
// Get SOAP Server response headers
public function __soapCall($function, $arguments, $options = array(), $input_headers = null, &$output_headers = null)
{
parent::__soapCall($function, $arguments, $options, $input_headers, $output_headers);
print_r($output_headers); // Array of response headers
}
// If you are using WSDL you need this, so you still can call functions directly without calling __soapCall manualy
public function __call($func, $args)
{
return $this->__soapCall($func, $args);
}
?>If you are using this method, remember that the array of arguments need to be passed in with the ordering being the same order that the SOAP endpoint expects.
e.g
<?php
//server expects: Foo(string name, int age)
//won't work
$args = array(32, 'john');
$out = $client->__soapCall('Foo', $args);
//will work
$args = array('john', 32);
$out = $client->__soapCall('Foo', $args);
?>The call to __soapCall returned an object to me either. This is the function which makes my life easier:
function obj2array($obj) {
$out = array();
foreach ($obj as $key => $val) {
switch(true) {
case is_object($val):
$out[$key] = obj2array($val);
break;
case is_array($val):
$out[$key] = obj2array($val);
break;
default:
$out[$key] = $val;
}
}
return $out;
}
Usage:
...
$response = $client ->__soapCall("track", array('parameters' => $request));
$response = obj2array($response);
Hope it helps.The most annoying thing is that you'll get no warning trying to pass object not matching wsdl e.g. if server expects smth like $Object->expName->... and you would pass $Object->otherName the client will send empty request without notifying you.
Also pay attention that names are key sensitive.
In my case I spent hours trying to pass $Post->Lead->... object instead of $Post->lead-> ...If your service is a .NET doc/lit, which means the input message has a single part named 'parameters' that is a structure that wraps the parameters. Your call should look like this:
<?php
$params = array('param_name_1'=>$val_1,'param_name_2'=>$val_2);
$client->call('MethodName', array('parameters' => $params));
?>If you want to pass an xml document node as a function parameter, your need to create a SoapVar object with a text represention of the xml node and the XSD_ANYXML encoding constant. However, this constant is not exported by the extension and is not documented for some unknown reason.
Therefore, to get this to work you must either register the XSD_ANYXML #define as a PHP constant, or use the integer value of the constant when creating the SoapVar, which is 147.
$soapvar = new SoapVar($xml_text, 147);
$params = array("ItemXml" => $soapvar, "PropertyView" => "blah");
$result = $this->soapclient->__soapCall("SaveItem", array("parameters"=>$params), null, $this->soapheaders);
However, this still doesnt give the correct result. For some reason, the ItemXml parameter node is not wrapped around the associated xml parameter in the soap request, and the following soap is produced (assumming '<item>blah</item>' is used as the $xml_text):
<SOAP-ENV:Envelope xmlns:SOAP-ENV="..." xmlns:ns1="...">
<SOAP-ENV:Header>...</SOAP-ENV:Header>
<SOAP-ENV:Body>
<ns1:SaveItem>
<item>blah</item>
<ns1:PropertyView>blah</ns1:PropertyView>
</ns1:SaveItem>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>I get the same problem reported above by ryan:
"ryan at grunt dot tv
22-Sep-2005 01:38
If you want to pass an xml document node as a function parameter, your need to create a SoapVar object with a text represention of the xml node and the XSD_ANYXML encoding constant. However, this constant is not exported by the extension and is not documented for some unknown reason."
When defined variable soapVar I assigned the type XSD_STRING rather than as XSD_ANYXML.
And when calls to the function you must pass the soapVar in an associative array.
For example if the function (called myFunc) expect a parameter called xmlInput you should do something like this:
$soapvar = new SoapVar($query, XSD_STRING);
$result = $client->myFunc(array('xmlInput'=>$soapvar));
This XML fragment are wrapped around xmlImput tags.-Note, when trying to overload the __soapCall function, you should not use type hints or STRICT_STANDARDS will complain.
The correct signature is as follows:
<?php
class MySoapClient extends \SoapClient
{
...
public function __soapCall($function_name, $arguments, $options = null, $input_headers = null, &$output_headers = null)
{
...
}
....
}
?>If you are calling a weblogic service with a certificate and you are getting this error on the soap method call statement:
[EJB:010160]Security Violation: User: '<anonymous>' has insufficient permission to access EJB: type=<ejb>, application=app2_0_52_3, module=appsejb.jar, ejb=AppMethod, method=AppMethod, methodInterface=Remote, signature={java.lang.String}.
then check the wsdl in the soap open call - it must be https. Supplied with an http wsdl this took some time to figure out.
<?php
$client = new SoapClient("https://example.com/AppWs/Service?WSDL",
array('trace'=>true,
'exceptions'=>true,
'local_cert' => "/var/www/html/app/newcert.pem",
'passphrase' => "thepassphrase"));
$response = $client->__soapCall("MyMethod", array("param1" => $value1));
?>
Thanks to the authors for their comments on enabling openssl and curl by uncommenting extension=php_opensll.dll and extension=php_curl.dll in php.ini. Also for Olaf's instructions "append the content of the private key file and the certificate file to a single file". I did this using copy command on the DOS prompt:
copy mycert.pem+mykey.pem newcert.pemThe options in the third argument is documented in http://php.net/manual/en/function.soap-soapclient-construct.phpI was integrating a local warehouse system with a SOAP to our system and noticed some things.
1) Service uses "dot-namespacing" (fe. Item.Price) I classmapped this to Item_Price and used magical __get() and __set() to strip off 'Item.' from variable names. Works like a charm.
Example:
<Item.Price>1.52</Item.Price>
<?php
class Item_Price {
public $price;
public function __get($field) { $field = str_replace('Item.', '', $field); return $this->$field; }
public function __set($field, $value) { $field = str_replace('Item.', '', $field); $this->$field = $value; }
?>
2) I noticed that classmapping a segment with attributes and value is possible. Class uses variables as attributes and $_ is the value.
Example:
<?php
class Foo {
public $item = 'Bar';
public $_ = 'Value here';
}
?>
Turns to <Foo item="Bar">Value here</Foo>
Example of using classes with soapcalls:
<?php
$client = ExtendSoapClient::getInstance();
$foo = new Foo();
$response = $client->sendFoo($foo);
?>
Posted these since I think the documentation is lacking and very obsolete. Hopefully someone's burden eases.