(PHP 5, PHP 7, PHP 8)
$özel = false,$aAçıklamalı = false,$xpath = null,$isim_alanları = nullGeçerli düğüm türü için en doğru ismi döndürür.
Düğümün türüne bağlı olarak düğümün değeri.
Düğümün türüne bağlı olarak düğümün değeri.
DOMElement düğümlerinin düğüm değeri null değil
DOMNode::textContent'e eşittir.
XML_xxx_NODE sabitlerinden biri olarak
düğüm türü.
Düğümün ebeveyni. Böyle bir düğüm yoksa null döner.
Bu elemanın ebeveyn elemanı. Eğer böyle bir eleman yoksa, bu
null döndürür;.
Düğümün tüm çocuklarını içeren bir DOMNodeList nesnesi; düğüm çocuksuzsa boş bir DOMNodeList nesnesidir.
Düğümün ilk çocuğu; yoksa null'dur.
Düğümün son çocuğu; yoksa null'dur.
Bir önceki kardeş düğüm; yoksa null'dur.
Bir sonraki kardeş düğüm; yoksa null'dur.
Düğüm bir DOMElement nesnesi ise düğümün
özniteliklerini içeren bir DOMNamedNodeMap
nesnesi, yoksa null'dur.
Düğümün bir belgeye bağlı olup olmadığı
Düğümün ilişkili olduğu DOMDocument nesnesi.
Düğümüm kendisi bir DOMDocument nesnesi ise
null.
Belirtilmişse düğümün isim alanını betimleyen adres; yoksa
null'dur.
Düğümün isim alanı öneki.
Düğümün nitelikli isminin yerel kısmı.
Düğümün mutlak adresi; eğer gerçeklenim bir mutlak adres
sağlayamıyorsa null'dur.
Düğümün kendinin, çocuk ve torunlarının metin içeriği.
Bilginize:
DOM eklentisi UTF-8 kodlama kullanır. Diğer kodlamalarla çalışmak için mb_convert_encoding(), UConverter::transcode() veya iconv() kullanılabilir.
| Sürüm: | Açıklama |
|---|---|
| 8.3.0 | DOMNode::$parentElement ve DOMNode::$isConnected özellikleri eklendi. |
| 8.0.0 | Gerçeklenmemiş olan DOMNode::compareDocumentPosition(), DOMNode::isEqualNode(), DOMNode::getFeature(), DOMNode::setUserData() ve DOMNode::getUserData() yöntemi kaldırıldı. |
It took me forever to find a mapping for the XML_*_NODE constants. So I thought, it'd be handy to paste it here:
1 XML_ELEMENT_NODE
2 XML_ATTRIBUTE_NODE
3 XML_TEXT_NODE
4 XML_CDATA_SECTION_NODE
5 XML_ENTITY_REFERENCE_NODE
6 XML_ENTITY_NODE
7 XML_PROCESSING_INSTRUCTION_NODE
8 XML_COMMENT_NODE
9 XML_DOCUMENT_NODE
10 XML_DOCUMENT_TYPE_NODE
11 XML_DOCUMENT_FRAGMENT_NODE
12 XML_NOTATION_NODEYou cannot simply overwrite $textContent, to replace the text content of a DOMNode, as the missing readonly flag suggests. Instead you have to do something like this:
<?php
$node->removeChild($node->firstChild);
$node->appendChild(new DOMText('new text content'));
?>
This example shows what happens:
<?php
$doc = DOMDocument::loadXML('<node>old content</node>');
$node = $doc->getElementsByTagName('node')->item(0);
echo "Content 1: ".$node->textContent."\n";
$node->textContent = 'new content';
echo "Content 2: ".$node->textContent."\n";
$newText = new DOMText('new content');
$node->appendChild($newText);
echo "Content 3: ".$node->textContent."\n";
$node->removeChild($node->firstChild);
$node->appendChild($newText);
echo "Content 4: ".$node->textContent."\n";
?>
The output is:
Content 1: old content // starting content
Content 2: old content // trying to replace overwriting $node->textContent
Content 3: old contentnew content // simply appending the new text node
Content 4: new content // removing firstchild before appending the new text node
If you want to have a CDATA section, use this:
<?php
$doc = DOMDocument::loadXML('<node>old content</node>');
$node = $doc->getElementsByTagName('node')->item(0);
$node->removeChild($node->firstChild);
$newText = $doc->createCDATASection('new cdata content');
$node->appendChild($newText);
echo "Content withCDATA: ".$doc->saveXML($node)."\n";
?>For clarification:
The assumingly 'discoverd' by previous posters and seemingly undocumented methods (.getElementsByTagName and .getAttribute) on this class (DOMNode) are in fact methods of the class DOMElement, which inherits from DOMNode.
See: http://www.php.net/manual/en/class.domelement.phpThis class has a getAttribute method.
Assume that a DOMNode object $ref contained an anchor taken out of a DOMNode List. Then
$url = $ref->getAttribute('href');
would isolate the url associated with the href part of the anchor.The issues around mixed content took me some experimentation to remember, so I thought I'd add this note to save others time.
When your markup is something like: <div><p>First text.</p><ul><li><p>First bullet</p></li></ul></div>, you'll get XML_ELEMENT_NODEs that are quite regular. The <div> has children <p> and <ul> and the nodeValue for both <p>s yields the text you expect.
But when your markup is more like <p>This is <b>bold</b> and this is <i>italic</i>.</p>, you realize that the nodeValue for XML_ELEMENT_NODEs is not reliable. In this case, you need to look at the <p>'s child nodes. For this example, the <p> has children: #text, <b>, #text, <i>, #text.
In this example, the nodeValue of <b> and <i> is the same as their #text children. But you could have markup like: <p>This <b>is bold and <i>bold italic</i></b>, you see?</p>. In this case, you need to look at the children of <b>, which will be #text, <i>, because the nodeValue of <b> will not be sufficient.
XML_TEXT_NODEs have no children and are always named '#text'. Depending on how whitespace is handled, your tree may have "empty" #text nodes as children of <body> and elsewhere.
Attributes are nodes, but I had forgotten that they are not in the tree expressed by childNodes. Walking the full tree using childNodes will not visit any attribute nodes.Just discovered that node->nodeValue strips out all the tagsThis class apparently also has a getElementsByTagName method.
I was able to confirm this by evaluating the output from DOMNodeList->item() against various tests with the is_a() function.Yet another DOMNode to php array conversion function.
Other ones on this page are generating too "complex" arrays; this one should keep the array as tidy as possible.
Note: make sure to set LIBXML_NOBLANKS when calling DOMDocument::load, loadXML or loadHTML
See: http://be2.php.net/manual/en/libxml.constants.php
See: http://be2.php.net/manual/en/domdocument.loadxml.php
<?php
/**
* Returns an array representation of a DOMNode
* Note, make sure to use the LIBXML_NOBLANKS flag when loading XML into the DOMDocument
* @param DOMDocument $dom
* @param DOMNode $node
* @return array
*/
function nodeToArray( $dom, $node) {
if(!is_a( $dom, 'DOMDocument' ) || !is_a( $node, 'DOMNode' )) {
return false;
}
$array = false;
if( empty( trim( $node->localName ))) {// Discard empty nodes
return false;
}
if( XML_TEXT_NODE == $node->nodeType ) {
return $node->nodeValue;
}
foreach ($node->attributes as $attr) {
$array['@'.$attr->localName] = $attr->nodeValue;
}
foreach ($node->childNodes as $childNode) {
if ( 1 == $childNode->childNodes->length && XML_TEXT_NODE == $childNode->firstChild->nodeType ) {
$array[$childNode->localName] = $childNode->nodeValue;
} else {
if( false !== ($a = self::nodeToArray( $dom, $childNode))) {
$array[$childNode->localName] = $a;
}
}
}
return $array;
}
?>In response to: alastair dot dallas at gmail dot com about "#text" nodes.
"#text" nodes appear when there are spaces or new lines between end tag and next initial tag.
Eg "<data><age>10</age>[SPACES]<other>20</other>[SPACES]</data>"
"data" childNodes has 4 childs:
- age = 10
- #text = spaces
- other = 20
- #text = spacesHere is a little function that truncates a DomNode to a specified number of text characters. I use it to generate HTML excerpts for my blog entries.
<?php
function makehtmlexcerpt(DomNode $html, $excerptlength)
{
$remove = 0;
$htmllength = strlen(html_entity_decode($html->textContent, ENT_QUOTES, 'UTF-8'));
$truncate = $htmllength - $excerptlength;
if($htmllength > $excerptlength)
{
if($html->hasChildNodes())
{
$children = $html->childNodes;
for($counter = 0; $counter < $children->length; $counter ++)
{
$child = $children->item($children->length - ($counter + 1));
$childlength = strlen(html_entity_decode($child->textContent, ENT_QUOTES, 'UTF-8'));
if($childlength <= $truncate)
{
$remove ++;
$truncate = $truncate - $childlength;
}
else
{
$child = makehtmlexcerpt($child, $childlength - $truncate);
break;
}
}
if($remove != 0)
{
for($counter = 0; $counter < $remove; $counter ++)
{
$html->removeChild($html->lastChild);
}
}
}
else
{
if($html->nodeName == '#text')
{
$html->nodeValue = substr(html_entity_decode($html->nodeValue, ENT_QUOTES, 'UTF-8'), 0, $htmllength - $truncate);
}
}
}
return $html;
}
?>And apparently also a setAttribute method too:
$node->setAttribute( 'attrName' , 'value' );It would be helpful if docs for concrete properties mentioned readonly status of some properties:
"
ownerDocument
The DOMDocument object associated with this node.
"A function that can set the inner HTML without encoding error. $html can be broken content such as "<a ID=id20>ssss"
function setInnerHTML($node, $html) {
removeChildren($node);
if (empty($html)) {
return;
}
$doc = $node->ownerDocument;
$htmlclip = new DOMDocument();
$htmlclip->loadHTML('<meta http-equiv="Content-Type" content="text/html;charset=utf-8"><div>' . $html . '</div>');
$clipNode = $doc->importNode($htmlclip->documentElement->lastChild->firstChild, true);
while ($item = $clipNode->firstChild) {
$node->appendChild($item);
}
}