fread

(PHP 4, PHP 5, PHP 7, PHP 8)

fread — Dosyayı ikil kipte okur

Açıklama

fread(resource $dt, int $uzunluk): string|false

fread() işlevi, dt dosya tanıtıcısı ile belirtilen dosya akımından uzunluk bayta kadar veri okur. Okuma işlemi aşağıdaki koşullardan biri sağlanır sağlanmaz durur:

uzunluk bayt okununca.
Dosya sonuna ulaşılınca.
Bir paket kullanılabilir hale gelince veya soket zaman aşımına uğrayınca (ağ akımları için).
Eğer akım arabelleğe alınmışsa ve düz bir dosyaya ait değilse, en fazla yığıt boyutuna (genellikle 8192) eşit sayıda bayta kadar bir okuma yapılır; önceden arabelleğe alınan verilere bağlı olarak, döndürülen verilerin boyutu yığıt boyutundan daha büyük olabilir.

Bağımsız Değişkenler

dt: Bir dosya tanıtıcısı. Genellikle fopen() kullanılarak oluşturulur.
uzunluk: Okunacak azami bayt sayısı.

Dönen Değerler

Hata durumunda false aksi takdirde okunan dizge döner.

Örnekler

Örnek 1 - Basit bir fread() örneği

<?php
// bir dosyanın içeriğini bir dizge olarak okuyalım
$dosya = "/usr/local/birmetin.txt";
$dt = fopen($dosya, "r");
$içerik = fread($dt, filesize($dosya));
fclose($dt);
?>

Örnek 2 -İkil fread() örneği

Uyarı

İkil ve metin dosyaları farklı ele alan sistemlerde (Windows gibi) dosya açılırken fopen() işlevinin kip bağımsız değişkenine 'b' harfi dahil edilmelidir.

<?php
$dosya = "c:\\files\\birresim.gif";
$dt = fopen($dosya, "rb");
$içerik = fread($dt, filesize($dosya));
fclose($dt);
?>

Örnek 3 - Uzak fread() örnekleri

Uyarı

Okuma işlemi sıradan bir dosyadan değil de popen() ve fsockopen() işlevinden veya uzak dosyalar okunurken dönen akımlardan yapılıyorsa bir paket kullanılabilir hale gelince okuma işlemi durur. Yani, veriyi aşağıdaki örnekte gösterildiği gibi parçalar halinde toplamalısınız.

<?php
$dt = fopen("http://www.example.com/", "rb");
$içerik = stream_get_contents($dt);
fclose($dt);
?>

<?php
$dt = fopen("http://www.example.com/", "rb");
if (FALSE === $dt) {
    exit("URL'ye akım açılamadı");
}

$içerik = '';

while (!feof($dt)) {
    $içerik .= fread($dt, 8192);
}
fclose($dt);
?>

Notlar

Bilginize:
İstediğiniz bir dosyanın içeriğini bir dizge olarak almaksa, yukarıdaki koddan çok daha iyi başarım sağlayan file_get_contents() işlevini kullanın.

Bilginize:
fread() işlevinin mevcut dosya konumundan okuduğuna dikkat edin. Dosya konumlayıcının mevcut konumunu öğrenmek için ftell(), konumu dosyanın başına taşımak için rewind()işlevini kullanın.

Ayrıca Bakınız

fwrite() - Dosyaya ikil kipte yazar
fopen() - Bir dosya veya URL'yi açar
fsockopen() - Bir internet veya Unix alan soketi bağlantısı açar
popen() - Bir süreç tanıtıcısı açar
fgets() - Dosya tanıtıcısından bir satır döndürür
fgetss() - Dosya tanıtıcısından bir satırı HTML etiketlerinden arındırarak döndürür
fscanf() - Bir dosyadaki girdiyi belli bir biçeme göre çözümler
file() - Dosya içeriğinin tamamını bir diziye okur
fpassthru() - Bir dosya tanıtıcısında kalan verinin tamamını çıktılar
fseek() - Dosya tanıtıcısında konumu bir yerden başka bir yere taşır
ftell() - Dosya okuma/yazma konumlayıcının mevcut konumu ile döner
rewind() - Bir dosya tanıtıcısında konumu başa taşır
unpack() - Paketlenmiş bir ikil dizgeden verileri ayrıştırır

Improve This Page

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 14 notes

down

dharmilshah at gmail dot com ¶

10 years ago

For anyone still trying to write an effective file downloader function/script, the work has been done for you in all the major servers including Apache & nginx.

Using the X-Sendfile header, you can do the following:

if ($user->isLoggedIn())
{
    header("X-Sendfile: $path_to_somefile_private");
    header("Content-Type: application/octet-stream");
    header("Content-Disposition: attachment; filename=\"$somefile\"");
}

Apache will serve the file for you while NOT revealing your private file path! Pretty nice. This works on all browsers/download managers and saves a lot of resources.

Documentation:
Apache module: https://tn123.org/mod_xsendfile/
Nginx: http://wiki.nginx.org/XSendfile
Lighttpd: http://blog.lighttpd.net/articles/2006/07/02/x-sendfile/

Hopefully this will save you many hours of work.

down

edgarinvillegas at hotmail dot com ¶

15 years ago

I had a fread script that hanged forever (from php manual):

<?php
$fp = fsockopen("example.host.com", 80);
if (!$fp) {
    echo "$errstr ($errno)<br />\n";
} else {
    fwrite($fp, "Data sent by socket");
    $content = "";
    while (!feof($fp)) {  //This looped forever
        $content .= fread($fp, 1024);
    }
    fclose($fp);
    echo $content;
}
?>

The problem is that sometimes end of streaming is not marked by EOF nor a fixed mark, that's why this looped forever. This caused me a lot of headaches...
I solved it using the stream_get_meta_data function and a break statement as the following shows:

<?php
$fp = fsockopen("example.host.com", 80);
if (!$fp) {
    echo "$errstr ($errno)<br />\n";
} else {
    fwrite($fp, "Data sent by socket");
    $content = "";
    while (!feof($fp)) {  
        $content .= fread($fp, 1024);
        $stream_meta_data = stream_get_meta_data($fp); //Added line
         if($stream_meta_data['unread_bytes'] <= 0) break; //Added line
    }
    fclose($fp);
    echo $content;
}
?>

Hope this will save a lot of headaches to someone.

(Greetings, from La Paz-Bolivia)

down

mail at 3v1n0 dot net ¶

16 years ago

This is an hack I've done to download remote files with HTTP resume support. This is useful if you want to write a download script that fetches files remotely and then sends them to the user, adding support to download managers (I tested it on wget). To do that you should also use a "remote_filesize" function that you can easily write/find.



<?php

function readfile_chunked_remote($filename, $seek = 0, $retbytes = true, $timeout = 3) {

    set_time_limit(0);

    $defaultchunksize = 1024*1024;

    $chunksize = $defaultchunksize;

    $buffer = '';

    $cnt = 0;

    $remotereadfile = false;



    if (preg_match('/[a-zA-Z]+:\/\//', $filename))

        $remotereadfile = true;



    $handle = @fopen($filename, 'rb');



    if ($handle === false) {

        return false;

    }



    stream_set_timeout($handle, $timeout);

    

    if ($seek != 0 && !$remotereadfile)

        fseek($handle, $seek);



    while (!feof($handle)) {



        if ($remotereadfile && $seek != 0 && $cnt+$chunksize > $seek)

            $chunksize = $seek-$cnt;

        else

            $chunksize = $defaultchunksize;



        $buffer = @fread($handle, $chunksize);



        if ($retbytes || ($remotereadfile && $seek != 0)) {

            $cnt += strlen($buffer);

        }



        if (!$remotereadfile || ($remotereadfile && $cnt > $seek))

            echo $buffer;



        ob_flush();

        flush();

    }



    $info = stream_get_meta_data($handle);



    $status = fclose($handle);



    if ($info['timed_out'])

        return false;



    if ($retbytes && $status) {

        return $cnt;

    }



    return $status;

}

?>

down

Edward Jaramilla ¶

16 years ago

I couldn't get some of the previous resume scripts to work with Free Download Manager or Firefox.  I did some clean up and modified the code a little.

Changes:
1. Added a Flag to specify if you want download to be resumable or not
2. Some error checking and data cleanup for invalid/multiple ranges based on http://tools.ietf.org/id/draft-ietf-http-range-retrieval-00.txt
3. Always calculate a $seek_end even though the range specification says it could be empty... eg: bytes 500-/1234
4. Removed some Cache headers that didn't seem to be needed. (add back if you have problems)
5. Only send partial content header if downloading a piece of the file (IE workaround)

<?php

function dl_file_resumable($file, $is_resume=TRUE)
{
    //First, see if the file exists
    if (!is_file($file))
    {
        die("<b>404 File not found!</b>");
    }

    //Gather relevent info about file
    $size = filesize($file);
    $fileinfo = pathinfo($file);
    
    //workaround for IE filename bug with multiple periods / multiple dots in filename
    //that adds square brackets to filename - eg. setup.abc.exe becomes setup[1].abc.exe
    $filename = (strstr($_SERVER['HTTP_USER_AGENT'], 'MSIE')) ?
                  preg_replace('/\./', '%2e', $fileinfo['basename'], substr_count($fileinfo['basename'], '.') - 1) :
                  $fileinfo['basename'];
    
    $file_extension = strtolower($path_info['extension']);

    //This will set the Content-Type to the appropriate setting for the file
    switch($file_extension)
    {
        case 'exe': $ctype='application/octet-stream'; break;
        case 'zip': $ctype='application/zip'; break;
        case 'mp3': $ctype='audio/mpeg'; break;
        case 'mpg': $ctype='video/mpeg'; break;
        case 'avi': $ctype='video/x-msvideo'; break;
        default:    $ctype='application/force-download';
    }

    //check if http_range is sent by browser (or download manager)
    if($is_resume && isset($_SERVER['HTTP_RANGE']))
    {
        list($size_unit, $range_orig) = explode('=', $_SERVER['HTTP_RANGE'], 2);

        if ($size_unit == 'bytes')
        {
            //multiple ranges could be specified at the same time, but for simplicity only serve the first range
            //http://tools.ietf.org/id/draft-ietf-http-range-retrieval-00.txt
            list($range, $extra_ranges) = explode(',', $range_orig, 2);
        }
        else
        {
            $range = '';
        }
    }
    else
    {
        $range = '';
    }

    //figure out download piece from range (if set)
    list($seek_start, $seek_end) = explode('-', $range, 2);

    //set start and end based on range (if set), else set defaults
    //also check for invalid ranges.
    $seek_end = (empty($seek_end)) ? ($size - 1) : min(abs(intval($seek_end)),($size - 1));
    $seek_start = (empty($seek_start) || $seek_end < abs(intval($seek_start))) ? 0 : max(abs(intval($seek_start)),0);

    //add headers if resumable
    if ($is_resume)
    {
        //Only send partial content header if downloading a piece of the file (IE workaround)
        if ($seek_start > 0 || $seek_end < ($size - 1))
        {
            header('HTTP/1.1 206 Partial Content');
        }

        header('Accept-Ranges: bytes');
        header('Content-Range: bytes '.$seek_start.'-'.$seek_end.'/'.$size);
    }

    //headers for IE Bugs (is this necessary?)
    //header("Cache-Control: cache, must-revalidate");   
    //header("Pragma: public");

    header('Content-Type: ' . $ctype);
    header('Content-Disposition: attachment; filename="' . $filename . '"');
    header('Content-Length: '.($seek_end - $seek_start + 1));

    //open the file
    $fp = fopen($file, 'rb');
    //seek to start of missing part
    fseek($fp, $seek_start);

    //start buffered download
    while(!feof($fp))
    {
        //reset time limit for big files
        set_time_limit(0);
        print(fread($fp, 1024*8));
        flush();
        ob_flush();
    }

    fclose($fp);
    exit;
}

?>

down

john dot wellesz at teaser dot com ¶

10 years ago

Note that fread() will return '' (empty string) when a timeout occurs unlike socket_read() which returns false...

down

matt at matt-darby dot com ¶

17 years ago

I thought I had an issue where fread() would fail on files > 30M in size. I tried a file_get_contents() method with the same results. The issue was not reading the file, but echoing its data back to the browser. 

Basically, you need to split up the filedata into manageable chunks before firing it off to the browser:

<?php

$total     = filesize($filepath);
$blocksize = (2 << 20); //2M chunks
$sent      = 0;
$handle    = fopen($filepath, "r");

// Push headers that tell what kind of file is coming down the pike
header('Content-type: '.$content_type);
header('Content-Disposition: attachment; filename='.$filename);
header('Content-length: '.$filesize * 1024);
                
// Now we need to loop through the file and echo out chunks of file data
// Dumping the whole file fails at > 30M!
while($sent < $total){
    echo fread($handle, $blocksize);
    $sent += $blocksize;
}
            
exit(0);

?>

Hope this helps someone!

down

randym ¶

13 years ago

Concerning [problems with UTF-8 and] downloading Zip files I found that simply adding 3 lines of code before starting the fread to the buffer for delivery in all browsers solved the problem.



<?php

    ob_end_clean();

    ob_start();

    header( 'Content-Type:' );

?>



... see where placed in the function below:



<?php

function readfile_chunked( $filename, $retbytes = true ) {

    $chunksize = 1 * (1024 * 1024); // how many bytes per chunk

    $buffer = '';

    $cnt = 0;

    $handle = fopen( $filename, 'rb' );

    if ( $handle === false ) {

        return false;

    }

    ob_end_clean(); //added to fix ZIP file corruption

    ob_start(); //added to fix ZIP file corruption

    header( 'Content-Type:' ); //added to fix ZIP file corruption

    while ( !feof( $handle ) ) {

        $buffer = fread( $handle, $chunksize );

        //$buffer = str_replace("ï»¿","",$buffer);

        echo $buffer;

        ob_flush();

        flush();

        if ( $retbytes ) {

            $cnt += strlen( $buffer );

        }

    }

    $status = fclose( $handle );

    if ( $retbytes && $status ) {

        return $cnt; // return num. bytes delivered like readfile() does.

    }

    return $status;

}

?>

down

Anonymous ¶

16 years ago

It might be worth noting that if your site uses a front controller with sessions and you send a large file to a user; you should end the session just before sending the file, otherwise the user will not be able to continue continue browsing the site while the file is downloading.

down

shocker at shockingsoft dot com ¶

16 years ago

If you read from a socket connection or any other stream that may delay when responsing but you want to set a timeout you can use stream_set_timeout():

<?php
$f = fsockopen("127.0.0.1", 123);
if ($f)
 {
  fwrite($f, "hello");
  stream_set_timeout($f, 5); //5 seconds read timeout
  if (!fread($f, 5)) echo "Error while reading";
    else echo "Read ok";
  fclose($f);
 }
?>

down

Anonymous ¶

13 years ago

If you serve a file download over PHP with fread and print/echo and experience corrupted binary files, chances are the server still uses magic quotes and escapes the null bytes in your file. Although from 5.3.0 magic quotes are no longer supported, you might still encounter this problem. Try to turn them off by placing this code before using fread:

<?php
@ini_set('magic_quotes_runtime', 0);
?>

down

mrhappy[at]dotgeek.org ¶

19 years ago

Just a note for anybody trying to implement a php handled download script -

We spent a long time trying to figure out why our code was eating system resources on large files.. Eventually we managed to trace it to output buffering that was being started on every page via an include.. (It was attempting to buffer the entire 600 Megs or whatever size *before* sending data to the client) if you have this problem you may want to check that first and either not start buffering or close that in the usual way :)

Hope that prevents somebody spending hours trying to fix an obscure issue.

Regards :)

down

Richard Dale richard at premiumdata dot n dot e dot t ¶

19 years ago

If you use any of the above code for downloadinng files, Internet Explorer will change the filename if it has multiple periods in it to something with square brackets.  To work around this, we check to see if the User Agent contains MSIE and rewrite the necessary periods as %2E



<?php

# eg. $filename="setup.abc.exe";

if (strstr($_SERVER['HTTP_USER_AGENT'], "MSIE")) { 

    # workaround for IE filename bug with multiple periods / multiple dots in filename

    # that adds square brackets to filename - eg. setup.abc.exe becomes setup[1].abc.exe

    $iefilename = preg_replace('/\./', '%2e', $filename, substr_count($filename, '.') - 1);

    header("Content-Disposition: attachment; filename=$iefilename" );

} else {

    header("Content-Disposition: attachment; filename=$filename");

}

?>

down

m (at) mindplay (dot) dk ¶

19 years ago

Here's a function for sending a file to the client - it may look more complicated than necessary, but has a number of advantages over simpler file sending functions:

- Works with large files, and uses only an 8KB buffer per transfer. 

- Stops transferring if the client is disconnected (unlike many scripts, that continue to read and buffer the entire file, wasting valuable resources) but does not halt the script 

- Returns TRUE if transfer was completed, or FALSE if the client was disconnected before completing the download - you'll often need this, so you can log downloads correctly. 

- Sends a number of headers, including ones that ensure it's cached for a maximum of 2 hours on any browser/proxy, and "Content-Length" which most people seem to forget. 

(tested on Linux (Apache) and Windows (IIS5/6) under PHP4.3.x)

Note that the folder from which protected files will be pulled, is set as a constant in this function (/protected) ... Now here's the function: 

<?php
function send_file($name) {
  ob_end_clean();
  $path = "protected/".$name;
  if (!is_file($path) or connection_status()!=0) return(FALSE);
  header("Cache-Control: no-store, no-cache, must-revalidate");
  header("Cache-Control: post-check=0, pre-check=0", false);
  header("Pragma: no-cache");
  header("Expires: ".gmdate("D, d M Y H:i:s", mktime(date("H")+2, date("i"), date("s"), date("m"), date("d"), date("Y")))." GMT");
  header("Last-Modified: ".gmdate("D, d M Y H:i:s")." GMT");
  header("Content-Type: application/octet-stream");
  header("Content-Length: ".(string)(filesize($path)));
  header("Content-Disposition: inline; filename=$name");
  header("Content-Transfer-Encoding: binary\n");
  if ($file = fopen($path, 'rb')) {
    while(!feof($file) and (connection_status()==0)) {
      print(fread($file, 1024*8));
      flush();
    }
    fclose($file);
  }
  return((connection_status()==0) and !connection_aborted());
}
?>

And here's an example of using the function: 

<?php 
if (!send_file("platinumdemo.zip")) { 
die ("file transfer failed"); 
// either the file transfer was incomplete 
// or the file was not found 
} else { 
// the download was a success 
// log, or do whatever else 
} 
?> 

Regards, 
Rasmus Schultz

down

admin at codebydeer dot com ¶

2 months ago

You need to know that if the $length parameter of fread() is 0, it will be Faltal Error.
<?php
$filepath = "example/a/dir/file.txt";

$fp = fopen($filepath, "c+");
fseek($fp, 0);
$fileSize = fstat($fp)["size"];
if ($fileSize <= 0) {
    $txt = "";
} else {
    $txt = fread($fp, $fileSize);
}
echo $txt;
?>
I'm Japanese so if I took some mistakes, very sorry.
thanks!

＋add a note