GOTCHA: If your first element is false, you don't know whether it was empty or not.
<?php
$a = array();
$b = array(false, true, true);
var_dump(reset($a) === reset($b)); //bool(true)
?>
So don't count on a false return being an empty array.
(PHP 4, PHP 5, PHP 7, PHP 8)
reset — Bir dizinin dahili göstericisini ilk elemana konumlar
reset() işleve dizi
dizisinin
dahili göstericisini ilk elemana konumlar ve ilk dizi elemanının değeri ile
döner.
Bu işlev mantıksal false
değeriyle dönebileceği gibi false
olarak değerlendirilebilecek mantıksal
olmayan bir değerle de dönebilir. Bu konuda daha fazla bilgi
Mantıksal Değerler bölümünde
bulunabilir. Bu işlevden dönen değeri sınamak için
===
işleci kullanılabilir.
dizi
Dahili göstericisi sıfırlanacak dizi.
Dizi boşsa false
, değilse dizinin ilk elemanının değeri.
Sürüm: | Açıklama |
---|---|
8.1.0 | Bu işlevin nesnelerden çağrılması artık önerilmiyor. Ya nesne önce get_mangled_object_vars() kullanılarak bir diziye dönüştürülmeli ya da bunun yerine Iterator arayüzünü gerçekleyen bir sınıf tarafından sağlanan ArrayIterator gibi yöntemler kullanılmalıdır. |
7.4.0 | SPL sınıflarının örnekleri, artık bu işlevle aynı ada sahip Iterator yöntemini çağırmak yerine hiçbir özelliği olmayan boş nesneler gibi ele alınıyor. |
Örnek 1 - reset() örneği
<?php
$dizi = array('bir adım', 'iki adım', 'üç adım', 'dörtadım');
// Öntanımlı olarak gösterici ilk elemandadır
echo current($dizi) . "\n"; // "bir adım"
// İki adım atalım
next($dizi);
next($dizi);
echo current($dizi) . "\n"; // "üç adım"
// Göstericiyi sıfırlayalım
reset($dizi);
echo current($dizi) . "\n"; // "bir adım"
?>
Bilginize: İlk eleman değerinin bool
false
olduğu durum ile boş bir diziden dönen değer arasında bir fark yoktur.false
elemanlar içeren bir dizinin ilk eleman değerini bilinçli olarak elde etmek için önce count() işlevinin dönüş değerine bakılmalı ya da reset() işlevini çağırdıktan sonra key() işlevininnull
döndürmediği doğrulanmalıdır.
GOTCHA: If your first element is false, you don't know whether it was empty or not.
<?php
$a = array();
$b = array(false, true, true);
var_dump(reset($a) === reset($b)); //bool(true)
?>
So don't count on a false return being an empty array.
Since reset() returns the first "value" of the array beside resetting its internal pointer; it will return different results when it is combined with key() or used separately. Like;
<?php
$products = array(
'biscuits' => array('biscuit1' => 'cobis', 'biscuit2' => 'probis'),
'chocolates' => array('coco1' => 'cococ', 'coco2' => 'prococ'),
);
echo key(reset($products['biscuits'])); // Fatal error
reset($products['biscuits']);
echo key($products['biscuits']); // Will print 'biscuit1'
?>
This is perfectly normal because in the first method, reset() returned the first "value" of the 'biscuits' element which is to be "cbosi". So key(string) will cause a fatal error. While in the second method you just reset the array and didn't use a returning value; instead you reset the pointer and than extracted the first key of an array.
If your array has more dimensions, it won't probably cause a fatal error but you will get different results when you combine reset() and key() or use them consecutively.
As for taking first key of an array, it's much more efficient to RESET and then KEY, rather then RESET result of ARRAY_KEYS (as sugested by gardnerjohng at gmail dot com).
<?php
reset($someArray);
echo key($someArray);
?>
This will give the same result but is much much faster. Larger arrays, better performance. Tested on 100-elements long array with 16 times faster results.
In response to gardnerjohng's note to retrieve the first _key_ of an array:
To retrieve the first _key_ of an array you can use the combination of reset() and key().
<?php
$properties = array(
'colour' => 'grey',
'flavour' => 'rubber',
'name' => 'Mouse Ball',
'texture' => 'rubbery'
);
reset($properties);
echo key($properties); // => 'colour'
?>
I prefer this solution as you don't have to create the keys array. This should (not measured) improve performance on large arrays.
Note that you can't use pointer here. It will reset the iteration counter in this case.
foreach($array as $key=>&$value) {...}
Use standard foreach instead
foreach($array as $key=>$value) {...}
Also it's good to reset this way the multidimentional arrays:
reset($voo2['moder']);
while (list($key, $value) = each ($voo2['moder'])) {
reset($voo2['moder'][$key]);
while (list($key1, $value1) = each ($voo2['moder'][$key])) {
#do what u want
}
}
Note that reset() will not affect sub-arrays of multidimensional array.
For example,
<?php
$arr = array(
1 => array(2,3,4,5,6),
2 => array(6,7,8,9,10)
);
while(list($i,) = each($arr))
{
echo "IN \$arr[$i]<br>";
while(list($sub_i,$entry) = each($arr[$i]))
{
echo "\$arr[$i][$sub_i] = $entry<br>";
}
}
reset($arr);
// Do the same again
while(list($i,) = each($arr))
{
echo "IN \$arr[$i]<br>";
while(list($sub_i,$entry) = each($arr[$i]))
{
echo "\$arr[$i][$sub_i] = $entry<br>";
}
}
?>
will print
IN $arr[1]
$arr[1][0] = 2
$arr[1][1] = 3
$arr[1][2] = 4
$arr[1][3] = 5
$arr[1][4] = 6
IN $arr[2]
$arr[2][0] = 6
$arr[2][1] = 7
$arr[2][2] = 8
$arr[2][3] = 9
$arr[2][4] = 10
IN $arr[1]
IN $arr[2]
Info:
Following code gives a strict warning in 5.4.45
return reset(array_keys($result['node']));
"Strict warning: Only variables should be passed by reference"
So should be:
$keys = array_keys($result['node']);
return reset($keys);
Don't use `reset()` to get the first value of an associative array. It works great for true arrays but works unexpectedly on Iterator objects. http://bugs.php.net/bug.php?id=38478
Colin, there`s a better (IMO) way to solve your problem.
<?
// ...
foreach($a as $k => &$d){} // notice the "&"
// ...
?>
It`s a new feature in PHP5 to use references in foreach loop. This way PHP isn`t making a copy of the array, so the internal pointer won`t be reset.
I had a problem with PHP 5.0.5 somehow resetting a sub-array of an array with no apparent reason. The problem was in doing a foreach() on the parent array PHP was making a copy of the subarrays and in doing so it was resetting the internal pointers of the original array.
The following code demonstrates the resetting of a subarray:
<?
$a = array(
'a' => array(
'A', 'B', 'C', 'D',
),
'b' => array(
'AA', 'BB', 'CC', 'DD',
),
);
// Set the pointer of $a to 'b' and the pointer of 'b' to 'CC'
reset($a);
next($a);
next($a['b']);
next($a['b']);
next($a['b']);
var_dump(key($a['b']));
foreach($a as $k => $d)
{
}
var_dump(key($a['b']));
?>
The result of the two var dumps are 3 and 0, respectively. Clearly the internal pointer of $a['b'] was reset by doing the foreach loop over $a.
Each time the foreach loop iterated over the 'a' and 'b' keys of $a it made a copy of $a['a'] and $a['b'] into $d which resetted the internal pointers of $a['a'] and $a['b'] despite making no obvious changes.
The solution is instead to iterate over the keys of $a.
<?
foreach(array_keys($a) as $k)
{
}
?>
and using $a[$k] (or creating an alias of $a[$k] as $d and dealing with the consequences of using aliases).
For the curious, I was implementing the Iterator interface on a dummy object and calling a global object to do the actual iteration (also to cope with PHP's lack of C-style pointers which when doing a $a = $b on objects would cause the data in $a to be inconsistent with the data in $b when modified). Being that I had many dummy objects representing different data sets I chose to store each data set as a subarray contained within the global object. To make this work each dummy object has to store a key (which can freely be duplicated without problems) that it passes to the global object when rewind, key, current, next, and valid were called on the dummy object.
Unfortunately for me, my key required to be more than just a simple string or number (if it was then it could be used to directly index the subarray of data for that object and problem avoided) but was an array of strings. Instead, I had to iterate over (with a foreach loop) each subarray and compare the key to a variable stored within the subarray.
So by using a foreach loop in this manner and with PHP resetting the pointer of subarrays it ended up causing an infinite loop.
Really, this could be solved by PHP maintaining internal pointers on arrays even after copying.