PHP: Встановлення

Встановлення

pthreads releases are hosted by PECL and the source code by » github, the easiest route to installation is the normal PECL route: » https://pecl.php.net/package/pthreads.

Windows users can download prebuilt release binaries from the » PECL website.

Застереження

Windows users need to take the additional step of adding pthreadVC2.dll (distributed with Windows releases) to their PATH.

Improve This Page

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 10 notes

down

zahid dot smz at gmail dot com ¶

10 years ago

For Wampp (Windows)
-----------------------------------------------------------------------------------
1.  Find out what is your 'PHP Extension Build' version by using phpinfo(). You can use this - http://localhost/?phpinfo=1

2.  Download the pthreads that matches your php version (32 bit or 64 bit) and php extension build (currently used VC11). Use this link for download - http://windows.php.net/downloads/pecl/releases/pthreads/ 

3.  Extract the zip -
      Move php_pthreads.dll to the 'bin\php\ext\' directory.
      Move pthreadVC2.dll to the 'bin\php\' directory.
      Move pthreadVC2.dll to the 'bin\apache\bin' directory.
      Move pthreadVC2.dll to the 'C:\windows\system32' directory.

4.  Open php\php.ini and add
      extension=php_pthreads.dll

Now restart server and you are done. Thanks.

down

Michel Phillipe Luca ¶

9 years ago

Here is how I got it working under Linux Ubuntu distro - WITHOUT USE PECL:

We will download both, PHP and Pthread without PECL

1 - Get PHP version
For this example we will use version: 5.4.36

# wget http://www.php.net/distributions/php-5.4.36.tar.gz

2- Get Pthreads version:
I'm using an old version but, you could take any one

# wget http://pecl.php.net/get/pthreads-1.0.0.tgz

Extract both, php and pthreads versions

#tar zxvf php-5.4.36.tar.gz
#tar zxvf pthreads-1.0.0.tgz 

3- Move Pthreads to php/ext folder. Inside version of PHP downloaded at item 1.

4- Reconfigure sources
# ./buildconf --force
# ./configure --help | grep pthreads

You have to see --enable-pthreads listed. If do not, clear the buidls with this commands:

# rm -rf aclocal.m4
# rm -rf autom4te.cache/
# ./buildconf --force

5 - Inside php folder run configure command to set what we need:
# ./configure --enable-debug --enable-maintainer-zts --enable-pthreads --prefix=/usr --with-config-file-path=/etc

6 - Install PHP
We will run make clear just to be sure that no other crashed build will mess our new one.

# make clear 
# make
# make install

7 - Copy configuration file of PHP and add local lib to include path
# cp php.ini-development /etc/php.ini

Edit php.ini and set Include_path to be like this:

Include_path = “/usr/local/lib/php”

9 - Check Modules
# php -m (check pthread loaded)

You have to see pthreads listed

10 - If pthread is not listed, update php.ini
# echo "extension=pthreads.so" >> /etc/php.ini

down

Jimmy Christensen ¶

11 years ago

On Windows the installation is as follows:

Download the pthreads that matches your php version.
I found mine at: http://windows.php.net/downloads/pecl/releases/pthreads/
(I used version 0.44 wich is the newest at the time of writing this, and then downloaded the one for php 5.3 which is the version I am using).

Extract the zip.
Move php_pthreads.dll to the php\ext\ directory.
Move pthreadVC2.dll to the php\ directory.

Open php\php.ini and add
extension=php_pthreads.dll

You are done.

down

Pedro Proenca ¶

10 years ago

I haven't found any proper instructions on how to install pthreads in linux, so I'll leave the steps I followed:

# Required libraries
sudo apt-get install gcc make libzzip-dev libreadline-dev libxml2-dev \
libssl-dev libmcrypt-dev libcurl4-openssl-dev lib32bz2-dev 

# Download PHP
cd /usr/local/src

wget http://www.php.net/distributions/php-<version>.tar.gz
( e.g. wget http://www.php.net/distributions/php-5.5.8.tar.gz )

# Extract
tar zxvf php-<version>.tar.gz
(e.g. tar zxvf php-5.5.8.tar.gz )

# Configure
cd /usr/local/src/php-<version>
( e.g. cd /usr/local/src/php-5.5.8 )

./configure --prefix=/usr --with-config-file-path=/etc --enable-maintainer-zts

# Compile
make && make install
( make -j3 && make -j3 install) -> Faster building

# Copy configuration
cp php.ini-development /etc/php.ini

# Install pthreads
pecl install pthreads
echo "extension=pthreads.so" >> /etc/php.ini

# Check installation
php -m | grep pthreads

down

bens at effortlessis dot com ¶

4 years ago

Sadly, this extension seems to be in poor repair. After spending a few hours trying to get it to fly on Fedora 32 with PHP 7.4, I noticed that it's not really maintained since about 2016. 

Attempting to compile it with PHP 7.4 results in screens full of nasty compile errors.

down

matias dot zumbo at gmail dot com ¶

11 years ago

HOW TO INSTALL IN LINUX SYSTEM'S:
------------------------------------

1) Download PHP sources and Unpack PHP

2) Download PEAR
     wget http://pear.php.net/go-pear.phar
     php go-pear.phar

3) Download pthreads
Get PECL extension (PECL is a repository for PHP Extensions)

# pecl install pthread-0.4.4

4) Unpack pthreads
copy pthread-0.4.4  to  php/ext
(for ./configure allow  add option --enable-pthreads)

# mv build/php-src-master/ext/pthreads-master    build/php-src-master/ext/pthreads

5)  Reconfigure sources
# ./buildconf --force
# ./configure --help | grep pthreads

You should see the appropriate --enable-pthreads option listed as a result, if you do not, then

# rm -rf aclocal.m4
# rm -rf autom4te.cache/
# ./buildconf --force

6) Build PHP
Compile PHP source code
Add:
# ./configure --enable-debug --enable-maintainer-zts --enable-pthreads

7) Installing PHP
# make
# sudo make install

8) Update php.ini
Add in php.ini
extension=pthreads.so
Include_path = “/usr/local/lib/php”

9) Check Modules
php -m (check pthread loaded)

10) Test Thread Class
# php SimpleTest.php

down

pedro dot proenca at shapedfor dot me ¶

10 years ago

I haven't found any proper instructions on how to install pthreads in linux, so I'll leave the steps I followed:

# Required libraries
sudo apt-get install gcc make libzzip-dev libreadline-dev libxml2-dev \
libssl-dev libmcrypt-dev libcurl4-openssl-dev lib32bz2-dev 

# Download PHP
cd /usr/local/src

wget http://www.php.net/distributions/php-<version>.tar.gz
( e.g. wget http://www.php.net/distributions/php-5.5.8.tar.gz )

# Extract
tar zxvf php-<version>.tar.gz
(e.g. tar zxvf php-5.5.8.tar.gz )

# Configure
cd /usr/local/src/php-<version>
( e.g. cd /usr/local/src/php-5.5.8 )

./configure --prefix=/usr --with-config-file-path=/etc --enable-maintainer-zts

# Compile
make && make install
( make -j3 && make -j3 install) -> Faster building

# Copy configuration
cp php.ini-development /etc/php.ini

# Install pthreads
pecl install pthreads
echo "extension=pthreads.so" >> /etc/php.ini

# Check installation
php -m | grep pthreads

down

horica78 at yahoo dot com ¶

5 years ago

They can still be used in web server if used with exec('php script.php') and php-cli.ini .

down

agnelvishal at gmail dot com ¶

6 years ago

To compile PHP 7.2 with pthreads on Ubuntu 16.04 or Ubuntu 18.04 or Debian 9 Stretch, use this bash file at https://gist.github.com/agnelvishal/24f42c65af2f6cace1e9387617a0182a

down

-1

and dot webdev at gmail dot com ¶

7 years ago

Also, possible by phpbrew

1. phpbrew install php-5.5.30 -- --enable-maintainer-zts
2. phpbrew use php-5.5.30
3. phpbrew ext install pthreads 2.0.10

＋add a note