Simple key white-list filter:
<?php
$arr = array('a' => 123, 'b' => 213, 'c' => 321);
$allowed = array('b', 'c');
print_r(array_intersect_key($arr, array_flip($allowed)));
?>
Will return:
Array
(
[b] => 213
[c] => 321
)
(PHP 5 >= 5.1.0, PHP 7, PHP 8)
array_intersect_key — Ermittelt die Schnittmenge von Arrays, indem es die Schlüssel vergleicht
array_intersect_key() gibt ein Array zurück, welches
alle Werte von array enthält, die Schlüssel
besitzen, die in allen anderen Argumenten enthalten sind.
arrayDas Array mit den Hauptschlüsseln, auf die geprüft werden soll.
arraysArrays zum Vergleichen der Schlüssel.
Gibt ein assoziatives Array zurück, welches alle Einträge von
array enthält, deren Schlüssel in allen weiteren
Arrays vorhanden sind.
| Version | Beschreibung |
|---|---|
| 8.0.0 | Diese Funktion kann jetzt mit nur einem Parameter aufgerufen werden. Zuvor waren mindestens zwei Parameter erforderlich. |
Beispiel #1 array_intersect_key()-Beispiel
<?php
$array1 = array('blau' => 1, 'rot' => 2, 'grün' => 3, 'violett' => 4);
$array2 = array('grün' => 5, 'blau' => 6, 'gelb' => 7, 'türkis' => 8);
var_dump(array_intersect_key($array1, $array2));
?>Das oben gezeigte Beispiel erzeugt folgende Ausgabe:
array(2) {
["blau"]=>
int(1)
["grün"]=>
int(3)
}
In unserem Beispiel ist zu sehen, dass nur die Schlüssel
'blau' und 'grün' in beiden Arrays
vorhanden sind und daher zurückgegeben werden. Zu beachten ist auch, dass
'blau' und 'grün' in beiden Arrays
unterschiedliche Werte besitzen. Eine Übereinstimmung wird dennoch
festgestellt, da nur die Schlüssel geprüft werden. Die zurückgegebenen
Werte sind diejenigen aus array.
Die beiden Schlüssel der Schlüssel => Wert-Paare
werden genau dann als gleich erachtet, wenn
(string) $key1 === (string) $key2 . Anders ausgedrückt
findet eine strikte Prüfung statt, in der die String-Darstellungen gleich
sein müssen.
Simple key white-list filter:
<?php
$arr = array('a' => 123, 'b' => 213, 'c' => 321);
$allowed = array('b', 'c');
print_r(array_intersect_key($arr, array_flip($allowed)));
?>
Will return:
Array
(
[b] => 213
[c] => 321
)Note that the order of the keys in the returned array is the same as the order of the keys in the source array.
To sort by the second array, then you may do so through array_replace.
<?php
$array = array(
'two' => 'a',
'three' => 'b',
'one' => 'c',
);
$keyswant = array(
'one' => '',
'three' => '',
);
print_r(array_intersect_key(array_replace($keyswant, $array), $keyswant));
?>
Shows:
Array
(
[one] => c
[three] => b
)
Rather than:
Array
(
[three] => b
[one] => c
)[Editor's note: changed array_merge_recursive() to array_replace_recursive() to fix the script]
Here is a better way to merge settings using some defaults as a whitelist.
<?php
$defaults = [
'id' => 123456,
'client_id' => null,
'client_secret' => null,
'options' => [
'trusted' => false,
'active' => false
]
];
$options = [
'client_id' => 789,
'client_secret' => '5ebe2294ecd0e0f08eab7690d2a6ee69',
'client_password' => '5f4dcc3b5aa765d61d8327deb882cf99', // ignored
'client_name' => 'IGNORED', // ignored
'options' => [
'active' => true
]
];
var_dump(
array_replace_recursive($defaults,
array_intersect_key(
$options, $defaults
)
)
);
?>
Output:
array (size=4)
'id' => int 123456
'client_id' => int 789
'client_secret' => string '5ebe2294ecd0e0f08eab7690d2a6ee69' (length=32)
'options' =>
array (size=2)
'trusted' => boolean false
'active' => boolean trueIf you want an array that has no key value pairs added from the second array:
$new = array_intersect_key($b, $a) + $a;Note that the order of the keys in the returned array is the same as the order of the keys in the source array. eg:
<?php
$array = array(
'two' => 'a',
'three' => 'b',
'one' => 'c',
);
$keyswant = array(
'one' => '',
'three' => '',
);
print_r(array_intersect_key($array, $keyswant));
?>
Shows:
Array
(
[three] => b
[one] => c
)I have found the following helpful:
<?PHP
function array_merge_default($default, $data) {
$intersect = array_intersect_key($data, $default); //Get data for which a default exists
$diff = array_diff_key($default, $data); //Get defaults which are not present in data
return $diff + $intersect; //Arrays have different keys, return the union of the two
}
?>
It's use is like both of the functions it uses, but keeps defaults and _only_ defaults. It's designed for key arrays, and i'm not sure how it will work on numeric indexed arrays.
Example:
<?PHP
$default = array(
"one" => 1,
"two" => 2
);
$untrusted = array(
"one" => 42,
"three" => 3
);
var_dump(array_merge_default($default, $untrusted));
array(2) {
["two"]=>
int(2)
["one"]=>
int(42)
}
?>Jesse: no, array_intersect_key does not accomplish the same thing as what you posted:
array_flip (array_intersect (array_flip ($a), array_flip ($b)))
because when the array is flipped, values become keys. having duplicate values is not a problem, but having duplicate keys is. array_flip resolves it by keeping only one of the duplicates and discarding the rest. by the time you start intersecting, you've already lost information.Regarding php at keithtylerdotcom solution to emulate
<?php
$z = someFuncReturningAnArray()['some_key'];
?>
His recommended solution will still return an array. To get the value of a single key in an array returned by a function, simply add implode() to the recipe:
<?php
function someFuncReturningAnArray() {
return array(
'a' => 'b',
'c' => 'd',
'e' => 'f',
'g' => 'h',
'i' => 'j'
);
}
//traditional way
$temp = someFuncReturningAnArray();
$b = $temp['a'];
echo print_r($b, 1) . "\n----------\n";
//keithtylerdotcom one-line method
$b = array_intersect_key(someFuncReturningAnArray(), array('a'=>''));
echo print_r($b, 1) . "\n----------\n";
//better one line method
$b = implode('', array_intersect_key(someFuncReturningAnArray(), array('a'=>'')));
echo print_r($b, 1) . "\n----------\n";
?><?php
/**
* calculates intersection of two arrays like array_intersect_key but recursive
*
* @param array/mixed master array
* @param array array that has the keys which should be kept in the master array
* @return array/mixed cleand master array
*/
function myIntersect($master, $mask) {
if (!is_array($master)) { return $master; }
foreach ($master as $k=>$v) {
if (!isset($mask[$k])) { unset ($master[$k]); continue; } // remove value from $master if the key is not present in $mask
if (is_array($mask[$k])) { $master[$k] = $this->myIntersect($master[$k], $mask[$k]); } // recurse when mask is an array
// else simply keep value
}
return $master;
}
?>in case you came here looking for a function that returns an array containing the values of `all` arrays with intersecting keys:
<?php
function array_merge_on_key($key, $array1, $array2) {
$arrays = array_slice(func_get_args(), 1);
$r = array();
foreach($arrays as &$a) {
if(array_key_exists($key, $a)) {
$r[] = $a[$key];
continue;
}
}
return $r;
}
// example:
$array1 = array("id" => 12, "name" => "Karl");
$array2 = array("id" => 4, "name" => "Franz");
$array3 = array("id" => 9, "name" => "Helmut");
$array4 = array("id" => 10, "name" => "Kurt");
$result = array_merge_on_key("id", $array1, $array2, $array3, $array4);
echo implode(",", $result); // => 12,4,9,10
?>Just a simple script if you want to use one array, which contains only zeros and ones, as mask for another one (both arrays must have the same size of course). $outcome is an array that contains only those values from $source where $mask is equal to 1.
<?php
$outcome = array_values(array_intersect_key( array_values($source), array_filter(array_values($mask)) ));
?>
PS: the array_values() function is necessary to ensure that both arrays have the same numbering/keys, otherwise your masking does not behave as you expect.
Enjoy!