array_merge_recursive

(PHP 4 >= 4.0.1, PHP 5, PHP 7, PHP 8)

array_merge_recursive — Führt ein oder mehrere Arrays rekursiv zusammen

Beschreibung

array_merge_recursive(array ...$arrays): array

array_merge_recursive() fügt die Elemente von einem oder mehreren Arrays zusammen, so dass die Werte eines Arrays an die des voherigen angehängt werden. Das daraus resultierende Array wird zurückgegeben.

Falls die angegebenen Arrays die selben String-Schlüssel haben, so werden die Werte dieser Schlüssel in einem Array zusammengeführt. Dies geschieht rekursiv, so dass, falls einer der Werte selbst ein Array ist, auch dieser Wert mit dem entsprechenden Eintrag eines anderen Arrays zusammengeführt wird. Falls jedoch die Arrays den gleichen numerischen Schlüssel haben, so wird der spätere Wert nicht den ursprünglichen Wert überschreiben, sondern er wird angehängt.

Parameter-Liste

arrays: Variable Liste der Arrays, die rekursiv zusammengeführt werden sollen.

Rückgabewerte

Ein Array mit Werten, die aus dem Zusammenführen der Argumente resultieren. Bei Aufruf ohne Argument wird ein leeres Array zurückgeliefert.

Changelog

Version	Beschreibung
7.4.0	Diese Funktion kann nun ohne Parameter aufgerufen werden. Zuvor war mindestens ein Parameter erforderlich.

Beispiele

Beispiel #1 array_merge_recursive()-Beispiel

<?php
$ar1 = array("farbe" => array ("favorit" => "rot"), 5);
$ar2 = array(10, "farbe" => array ("favorit" => "grün", "blau"));
$result = array_merge_recursive ($ar1, $ar2);
?>

Das oben gezeigte Beispiel erzeugt folgende Ausgabe:

Array
(
    [farbe] => Array
        (
            [favorit] => Array
                (
                    [0] => rot
                    [1] => grün
                )

            [0] => blau
        )

    [0] => 5
    [1] => 10
)

Siehe auch

array_merge() - Führt zwei oder mehr Arrays zusammen
array_replace_recursive() - Ersetzt rekursiv Elemente des ersten Arrays durch Elemente der übergebenen Arrays

Improve This Page

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 38 notes

down

168

gabriel dot sobrinho at gmail dot com ¶

15 years ago

I refactored the Daniel's function and I got it:

<?php
/**
 * array_merge_recursive does indeed merge arrays, but it converts values with duplicate
 * keys to arrays rather than overwriting the value in the first array with the duplicate
 * value in the second array, as array_merge does. I.e., with array_merge_recursive,
 * this happens (documented behavior):
 *
 * array_merge_recursive(array('key' => 'org value'), array('key' => 'new value'));
 *     => array('key' => array('org value', 'new value'));
 *
 * array_merge_recursive_distinct does not change the datatypes of the values in the arrays.
 * Matching keys' values in the second array overwrite those in the first array, as is the
 * case with array_merge, i.e.:
 *
 * array_merge_recursive_distinct(array('key' => 'org value'), array('key' => 'new value'));
 *     => array('key' => array('new value'));
 *
 * Parameters are passed by reference, though only for performance reasons. They're not
 * altered by this function.
 *
 * @param array $array1
 * @param array $array2
 * @return array
 * @author Daniel <daniel (at) danielsmedegaardbuus (dot) dk>
 * @author Gabriel Sobrinho <gabriel (dot) sobrinho (at) gmail (dot) com>
 */
function array_merge_recursive_distinct ( array &$array1, array &$array2 )
{
  $merged = $array1;

  foreach ( $array2 as $key => &$value )
  {
    if ( is_array ( $value ) && isset ( $merged [$key] ) && is_array ( $merged [$key] ) )
    {
      $merged [$key] = array_merge_recursive_distinct ( $merged [$key], $value );
    }
    else
    {
      $merged [$key] = $value;
    }
  }

  return $merged;
}
?>

This fix the E_NOTICE when the the first array doesn't have the key and the second array have a value which is a array.

down

martyniuk dot vasyl at gmail dot com ¶

12 years ago

This is my version of array_merge_recursive without overwriting numeric keys:
<?php
function array_merge_recursive_new() {

        $arrays = func_get_args();
        $base = array_shift($arrays);

        foreach ($arrays as $array) {
            reset($base); //important
            while (list($key, $value) = @each($array)) {
                if (is_array($value) && @is_array($base[$key])) {
                    $base[$key] = array_merge_recursive_new($base[$key], $value);
                } else {
                    $base[$key] = $value;
                }
            }
        }

        return $base;
    }
?>

down

daniel at danielsmedegaardbuus dot dk ¶

15 years ago

<?php
/**
 * array_merge_recursive does indeed merge arrays, but it converts values with duplicate
 * keys to arrays rather than overwriting the value in the first array with the duplicate
 * value in the second array, as array_merge does. I.e., with array_merge_recursive,
 * this happens (documented behavior):
 * 
 * array_merge_recursive(array('key' => 'org value'), array('key' => 'new value'));
 *     => array('key' => array('org value', 'new value'));
 * 
 * array_merge_recursive_distinct does not change the datatypes of the values in the arrays.
 * Matching keys' values in the second array overwrite those in the first array, as is the
 * case with array_merge, i.e.:
 * 
 * array_merge_recursive_distinct(array('key' => 'org value'), array('key' => 'new value'));
 *     => array('key' => array('new value'));
 * 
 * Parameters are passed by reference, though only for performance reasons. They're not
 * altered by this function.
 * 
 * @param array $array1
 * @param mixed $array2
 * @return array
 * @author daniel@danielsmedegaardbuus.dk
 */
function &array_merge_recursive_distinct(array &$array1, &$array2 = null)
{
  $merged = $array1;
  
  if (is_array($array2))
    foreach ($array2 as $key => $val)
      if (is_array($array2[$key]))
        $merged[$key] = is_array($merged[$key]) ? array_merge_recursive_distinct($merged[$key], $array2[$key]) : $array2[$key];
      else
        $merged[$key] = $val;
  
  return $merged;
}
?>

down

walf ¶

13 years ago

There are a lot of examples here for recursion that are meant to behave more like array_merge() but they don't get it quite right or are fairly customised. I think this version is most similar, takes more than 2 arguments and can be renamed in one place:

<?php

function array_merge_recursive_simple() {

    if (func_num_args() < 2) {
        trigger_error(__FUNCTION__ .' needs two or more array arguments', E_USER_WARNING);
        return;
    }
    $arrays = func_get_args();
    $merged = array();
    while ($arrays) {
        $array = array_shift($arrays);
        if (!is_array($array)) {
            trigger_error(__FUNCTION__ .' encountered a non array argument', E_USER_WARNING);
            return;
        }
        if (!$array)
            continue;
        foreach ($array as $key => $value)
            if (is_string($key))
                if (is_array($value) && array_key_exists($key, $merged) && is_array($merged[$key]))
                    $merged[$key] = call_user_func(__FUNCTION__, $merged[$key], $value);
                else
                    $merged[$key] = $value;
            else
                $merged[] = $value;
    }
    return $merged;
}

$a1 = array(
    88 => 1,
    'foo' => 2,
    'bar' => array(4),
    'x' => 5,
    'z' => array(
        6,
        'm' => 'hi',
    ),
);
$a2 = array(
    99 => 7,
    'foo' => array(8),
    'bar' => 9,
    'y' => 10,
    'z' => array(
        'm' => 'bye',
        11,
    ),
);
$a3 = array(
    'z' => array(
        'm' => 'ciao',
    ),
);
var_dump(array_merge($a1, $a2, $a3));
var_dump(array_merge_recursive_simple($a1, $a2, $a3));
var_dump(array_merge_recursive($a1, $a2, $a3));
?>

gives:

array(7) {              array(7) {              array(7) {
  int(1)                  int(1)                  int(1)
  ["foo"]=>               ["foo"]=>               ["foo"]=>
  array(1) {              array(1) {              array(2) {
    [0]=>                   [0]=>                   [0]=>
    int(8)                  int(8)                  int(2)
  }                       }                         [1]=>
  ["bar"]=>               ["bar"]=>                 int(8)
  int(9)                  int(9)                  }
  ["x"]=>                 ["x"]=>                 ["bar"]=>
  int(5)                  int(5)                  array(2) {
  ["z"]=>                 ["z"]=>                   [0]=>
  array(1) {              array(3) {                int(4)
    ["m"]=>                 [0]=>                   [1]=>
    string(4) "ciao"        int(6)                  int(9)
  }                         ["m"]=>               }
  [1]=>                     string(4) "ciao"      ["x"]=>
  int(7)                    [1]=>                 int(5)
  ["y"]=>                   int(11)               ["z"]=>
  int(10)                 }                       array(3) {
}                         [1]=>                     [0]=>
                          int(7)                    int(6)
                          ["y"]=>                   ["m"]=>
                          int(10)                   array(3) {
                        }                             [0]=>
                                                      string(2) "hi"
                                                      [1]=>
                                                      string(3) "bye"
                                                      [2]=>
                                                      string(4) "ciao"
                                                    }
                                                    [1]=>
                                                    int(11)
                                                  }
                                                  [1]=>
                                                  int(7)
                                                  ["y"]=>
                                                  int(10)
                                                }

down

fantomx1 at gmail dot com ¶

8 years ago

I little bit improved daniel's and gabriel's contribution to behave more like original array_merge function to append numeric keys instead of overwriting them and added usefull option of specifying which elements to merge as you more often than not need to merge only specific part of array tree, and some parts of array just need  to let overwrite previous. By specifying helper element mergeWithParent=true, that section of array  will be merged, otherwise latter array part will override former. First level of array behave as classic array_merge.

        function array_merge_recursive_distinct ( array &$array1, array &$array2 )
    {
        static $level=0;
        $merged = [];
        if (!empty($array2["mergeWithParent"]) || $level == 0) {
            $merged = $array1;
        }

        foreach ( $array2 as $key => &$value )
        {
            if (is_numeric($key)) {
                $merged [] = $value;
            } else {
                $merged[$key] = $value;
            }

            if ( is_array ( $value ) && isset ( $array1 [$key] ) && is_array ( $array1 [$key] )
            ) {
                $level++;
                $merged [$key] = array_merge_recursive_distinct($array1 [$key], $value);
                $level--;
            }
        }
        unset($merged["mergeWithParent"]);
        return $merged;
    }

down

thomas at n-o-s-p-a-m dot thoftware dot de ¶

16 years ago

This is a simple, three line approach.

Short description: If one of the Arguments isn't an Array, first Argument is returned. If an Element is an Array in both Arrays, Arrays are merged recursively, otherwise the element in $ins will overwrite the element in $arr (regardless if key is numeric or not). This also applys to Arrays in $arr, if the Element is scalar in $ins (in difference to the previous approach).

  function array_insert($arr,$ins) {
    # Loop through all Elements in $ins:
    if (is_array($arr) && is_array($ins)) foreach ($ins as $k => $v) {
      # Key exists in $arr and both Elemente are Arrays: Merge recursively.
      if (isset($arr[$k]) && is_array($v) && is_array($arr[$k])) $arr[$k] = array_insert($arr[$k],$v);
      # Place more Conditions here (see below)
      # ...
      # Otherwise replace Element in $arr with Element in $ins:
      else $arr[$k] = $v;
    }
    # Return merged Arrays:
    return($arr);
  }

In Addition to felix dot ospald at gmx dot de in my opinion there is no need to compare keys with type-casting, as a key always is changed into an integer if it could be an integer. Just try

$a = array('1'=>'1');
echo gettype(key($a));

It will echo 'integer'. So for having Integer-Keys simply appended instead of replaced, add the Line:

  elseif (is_int($k)) $arr[] = $v;

A Condition I used is:

  elseif (is_null($v)) unset($arr[$k]);

So a NULL-Value in $ins will unset the correspondig Element in $arr (which is different to setting it to NULL!). This may be another Addition to felix dot ospald at gmx dot de: The absolute correct way to check for a Key existing in an Array is using array_key_exists() (not needed in the current context, as isset() is combined with is_array()). array_key_exists() will return TRUE even if the Value of the Element is NULL.

And the last one: If you want to use this approach for more than 2 Arrays, simply use this:

  function array_insert_mult($arr) {
    # More than 1 Argument: Append all Arguments.
    if (func_num_args() > 1) foreach (array_slice(func_get_args(),1) as $ins) $arr = array_insert($arr,$ins);
    # Return merged Arrays:
    return($arr);
  }

And if you worry about maintaining References: Simply use $ins[$k] instead of $v when assigning a Value/using a Value as Argument.

down

remy dot damour at -please-no-spam-laposte dot net ¶

15 years ago

If what you want is merge all values of your array that are arrays themselves to get a resulting array of depth one, then you're more looking for array_flatten function.

Unfortunately I did not find such native function in php, here is the one I wrote:

<?php
/**
 * Flatten an array so that resulting array is of depth 1.
 * If any value is an array itself, it is merged by parent array, and so on.
 *
 * @param array $array
 * @param bool $preserver_keys OPTIONAL When true, keys are preserved when mergin nested arrays (=> values with same key get overwritten)
 * @return array
 */
function array_flatten($array, $preserve_keys = false)
{
    if (!$preserve_keys) {
        // ensure keys are numeric values to avoid overwritting when array_merge gets called
        $array = array_values($array);
    }
    
    $flattened_array = array();
    foreach ($array as $k => $v) {
        if (is_array($v)) {
            $flattened_array = array_merge($flattened_array, call_user_func(__FUNCTION__, $v, $preserve_keys));
        } elseif ($preserve_keys) {
            $flattened_array[$k] = $v;
        } else {
            $flattened_array[] = $v;
        }
    }
    return $flattened_array;
}

// example
$a = array ('k1' => 'a', 'k2' => array('k1' => 'b', 'k4' => array('k3' => 'c')));
var_export(array_flatten($a)); // output: array(0 => 'a', 1 => 'b', 2 => 'c')
var_export(array_flatten($a, true)); // output: array('k1' => 'b', 'k3' => 'c') // first 'k1' value gets overwritten by nested 'k1' value
?>

down

jonnybergstrom at googles mail domain dot comm ¶

15 years ago

This function didn't work for me - or it didn't do what I thought it would. So I wrote the below function, which merges two arrays, and returns the resulting array. The base array is the left one ($a1), and if a key is set in both arrays, the right value has precedence. If a value in the left one is an array and also an array in the right one, the function calls itself (recursion). If the left one is an array and the right one exists but is not an array, then the right non-array-value will be used.

*Any key only appearing in the right one will be ignored* 
 - as I didn't need values appearing only in the right in my implementation, but if you want that you could make some fast fix.

function array_merge_recursive_leftsource(&$a1, &$a2) {
    $newArray = array();
    foreach ($a1 as $key => $v) {
        if (!isset($a2[$key])) {
            $newArray[$key] = $v;
            continue;
        }

        if (is_array($v)) {
            if (!is_array($a2[$key])) {
                $newArray[$key] = $a2[$key];
                continue;
            }
            $newArray[$key] = array_merge_recursive_leftsource($a1[$key], $a2[$key]);
            continue;
        }

        $newArray[$key] = $a2[$key];
    }
    return $newArray;
}

down

spambegone at cratemedia dot com ¶

16 years ago

I've tried these array_merge_recursive functions without much success. Maybe it's just me but they don't seem to actually go more than one level deep? As with all things, its usually easier to write your own, which I did and it seems to work just the way I wanted. Anyways, my function hasn't been tested extensively, but it's a simple function, so in hopes that this might be useful to someone else I'm sharing.

Also, the PHP function array_merge_recursive() didn't work for my purposes because it didn't overwrite the values like I needed it to. You know how it works, it just turns it into an array with multiple values... not helpful if your code is expecting one string.

function array_merge_recursive_unique($array1, $array2) {
    
    // STRATEGY
    /*
    Merge array1 and array2, overwriting 1st array values with 2nd array 
    values where they overlap. Use array1 as the base array and then add 
    in values from array2 as they exist.
    
    Walk through each value in array2 and see if a value corresponds
    in array1. If it does, overwrite with second array value. If it's an 
    array, recursively execute this function and return the value. If it's 
    a string, overwrite the value from array1 with the value from array2. 
    
    If a value exists in array2 that is not found in array1, add it to array1.
    */

    // LOOP THROUGH $array2
    foreach($array2 AS $k => $v) {
        
        // CHECK IF VALUE EXISTS IN $array1
        if(!empty($array1[$k])) {
            // IF VALUE EXISTS CHECK IF IT'S AN ARRAY OR A STRING
            if(!is_array($array2[$k])) {
                // OVERWRITE IF IT'S A STRING
                $array1[$k]=$array2[$k];
            } else {
                // RECURSE IF IT'S AN ARRAY
                $array1[$k] = array_merge_recursive_unique($array1[$k], $array2[$k]);
            }
        } else {
            // IF VALUE DOESN'T EXIST IN $array1 USE $array2 VALUE
            $array1[$k]=$v;
        }
    }
    unset($k, $v);
    
    
    return $array1;
}

down

brian at vermonster dot com ¶

20 years ago

Here is a fairly simple function that replaces while recursing.

<?php
/**
 * array_merge_recursive2()
 *
 * Similar to array_merge_recursive but keyed-valued are always overwritten.
 * Priority goes to the 2nd array.
 *
 * @static yes
 * @public yes
 * @param $paArray1 array
 * @param $paArray2 array
 * @return array
 */
function array_merge_recursive2($paArray1, $paArray2)
{
    if (!is_array($paArray1) or !is_array($paArray2)) { return $paArray2; }
    foreach ($paArray2 AS $sKey2 => $sValue2)
    {
        $paArray1[$sKey2] = array_merge_recursive2(@$paArray1[$sKey2], $sValue2);
    }
    return $paArray1;
}

?>

Examples:
<?php

$array1 = array(
    'liquids' => array(
        'water' => array('cold', 'fizzy', 'clean')
        ,'beer' => 'warm'
    )
);

$array2 = array(
    'liquids' => array(
        'water' => 'hot'
        ,'milk' => 'wet'
    )
);

$result1 = array_merge_recursive2($array1, $array2);
$result2 = array_merge_recursive2($array2, $array1);
?>

Result 1 is:
Array
(
    [liquids] => Array
        (
            [water] => hot
            [beer] => warm
            [milk] => wet
        )
)

Result 2 is:
Array
(
    [liquids] => Array
        (
            [water] => Array
                (
                    [0] => cold
                    [1] => fizzy
                    [2] => clean
                )

            [milk] => wet
            [beer] => warm
        )
)

down

mark dot roduner at gmail dot com ¶

14 years ago

<?php
/**
 * Merges any number of arrays / parameters recursively, replacing 
 * entries with string keys with values from latter arrays. 
 * If the entry or the next value to be assigned is an array, then it 
 * automagically treats both arguments as an array.
 * Numeric entries are appended, not replaced, but only if they are 
 * unique
 *
 * calling: result = array_merge_recursive_distinct(a1, a2, ... aN)
**/

function array_merge_recursive_distinct () {
  $arrays = func_get_args();
  $base = array_shift($arrays);
  if(!is_array($base)) $base = empty($base) ? array() : array($base);
  foreach($arrays as $append) {
    if(!is_array($append)) $append = array($append);
    foreach($append as $key => $value) {
      if(!array_key_exists($key, $base) and !is_numeric($key)) {
        $base[$key] = $append[$key];
        continue;
      }
      if(is_array($value) or is_array($base[$key])) {
        $base[$key] = array_merge_recursive_distinct($base[$key], $append[$key]);
      } else if(is_numeric($key)) {
        if(!in_array($value, $base)) $base[] = $value;
      } else {
        $base[$key] = $value;
      }
    }
  }
  return $base;
}
?>

down

andyidol at gmail dot com ¶

13 years ago

Here's my function to recursively merge two arrays with overwrites. Nice for merging configurations.

<?php

function MergeArrays($Arr1, $Arr2)
{
  foreach($Arr2 as $key => $Value)
  {
    if(array_key_exists($key, $Arr1) && is_array($Value))
      $Arr1[$key] = MergeArrays($Arr1[$key], $Arr2[$key]);

    else
      $Arr1[$key] = $Value;

  }

  return $Arr1;

}

?>

down

andrew at indigo - sphere dot co dot uk ¶

4 years ago

An alternative solution where this function does not produce the desired output: Pass a custom recursive function to array_reduce():

For example (Using PHP 7 capabilities to create recursive anonymous function):

<?php
function array_merge_recursive(...$arrays): ?array {
   return array_reduce($arrays, new class {
        public function __invoke($carry, $item) {
            if (is_array($carry) && is_array($item) {
                return $this($carry, $item);
            }
            return $item ?: $carry;
        }
    }
}
?>
In this case truthy values will overwrite the value in the previous array.
Of course this is presented as a simple example only, and is not a general solution.

down

robert dot schlak at alcatel-lucent dot com ¶

12 years ago

The presence of NULLs; here is an example of the issue and a fix. Although it may not be apparent, if using array_merge_recursive in a loop to combine results from a database query or some other function, you can corrupt your result when NULLs are present in the data. I discovered this when migrating from an Oracle DB to a MySQL DB. I had to match the array structure returned from the PHP function calling the DB and got bit. The array_walk call fixed this for me.

This is a simple example that lacks any DB calls and looping. Assume your array had the DB column names (first, last, and age) and you needed to combine the data in a multi-dimensional array in which the column name is an array key with all rows beneath it. The corruption occurs in $a3. If using element position 2, one could create the fictitious 'pete johnson' because of the collapsing of elements.



<?php

print "<pre>Show corruption\\n";

$a1 = array('first'=>'bob', 'last'=>'jones', 'age'=>'48');

$a2 = array('first'=>'sam', 'last'=>'smith', 'age'=>'41');

$a3 = array('first'=>'pete', 'last'=>null, 'age'=>'3');

$a4 = array('first'=>'joe', 'last'=>'johnson', 'age'=>'33');

$a5 = array_merge_recursive($a1,$a2,$a3,$a4);

print_r($a5);



print "Show Fix\\n";

$a1 = array('first'=>'bob', 'last'=>'jones', 'age'=>'48');

$a2 = array('first'=>'sam', 'last'=>'smith', 'age'=>'41');

$a3 = array('first'=>'pete', 'last'=>null, 'age'=>'3');

array_walk($a3, 'null_to_empty');

$a4 = array('first'=>'joe', 'last'=>'johnson', 'age'=>'33');

$a5 = array_merge_recursive($a1,$a2,$a3,$a4);

print_r($a5);

print "</pre>\\n";



function null_to_empty(&$item) {



  $item = is_null($item) ? '' : $item;

}

?>

down

miniscalope at gmail dot com ¶

15 years ago

I would merge 2 arrays but keep the values unique in the result array.
I hope this will help...
<?php 

function array_merge_recursive_unique($array1, $array2) {
    
    foreach($array2 AS $k => $v) {
        if(!isset($array1[$k]))
        {
            $array1[$k] = $v;
        }
        else
        {
            if(!is_array($v)){
                if(is_array($array1[$k]))
                {
                    if(!in_array($v,$array1[$k]))
                    {
                        $array1[$k][] = $v;
                    }
                }
                else
                {
                    if($array1[$k] != $v)
                        $array1[$k] = array($array1[$k], $v);
                 }
            }
            else
            {
                $array1[$k] =    array_merge_recursive_unique($array1,$array2[$k]);
            }
            
        }
    
    }
      unset($k, $v);
      return $array1;
}

?>

down

paha at paha dot hu ¶

17 years ago

In this version the values are overwritten only if they are not an array.  If the value is an array, its elements will be merged/overwritten:

// array_merge_recursive which override value with next value.
// based on: http://www.php.net/manual/hu/function.array-merge-recursive.php 09-Dec-2006 03:38
function array_merge_recursive_unique($array0, $array1)
{
    $arrays = func_get_args();
    $remains = $arrays;

    // We walk through each arrays and put value in the results (without
    // considering previous value).
    $result = array();

    // loop available array
    foreach($arrays as $array) {

        // The first remaining array is $array. We are processing it. So
        // we remove it from remaing arrays.
        array_shift($remains);

        // We don't care non array param, like array_merge since PHP 5.0.
        if(is_array($array)) {
            // Loop values
            foreach($array as $key => $value) {
                if(is_array($value)) {
                    // we gather all remaining arrays that have such key available
                    $args = array();
                    foreach($remains as $remain) {
                        if(array_key_exists($key, $remain)) {
                            array_push($args, $remain[$key]);
                        }
                    }

                    if(count($args) > 2) {
                        // put the recursion
                        $result[$key] = call_user_func_array(__FUNCTION__, $args);
                    } else {
                        foreach($value as $vkey => $vval) {
                            $result[$key][$vkey] = $vval;
                        }
                    }
                } else {
                    // simply put the value
                    $result[$key] = $value;
                }
            }
        }
    }
    return $result;
}

down

phil dot kemmeter at gmail dot com ¶

15 years ago

I've edit this version even a little bit more, so that the function does not override any values, but inserts them at a free key in the array:

function my_array_merge ($arr,$ins) {
    if(is_array($arr))
    {
        if(is_array($ins)) foreach($ins as $k=>$v)
        {
            if(isset($arr[$k])&&is_array($v)&&is_array($arr[$k]))
            {
                $arr[$k] = my_array_merge($arr[$k],$v);
            }
            else {
                // This is the new loop :)
                while (isset($arr[$k]))
                    $k++;
                $arr[$k] = $v;
            }
        }
    }
    elseif(!is_array($arr)&&(strlen($arr)==0||$arr==0))
    {
        $arr=$ins;
    }
    return($arr);
}

Example:

$array1 = array(
    100 => array(30),
    200 => array(20, 30)
);

$array2 = array(
    100 => array(40),
    201 => array(60, 30)
);

print_r(my_array_merge($array1,$array2));

Output with array_merge_recursive:
Array
(
    [0] => Array
        (
            [0] => 30
        )

    [1] => Array
        (
            [0] => 20
            [1] => 30
        )

    [2] => Array
        (
            [0] => 40
        )

)
This is not the result, I expect from a MERGE-Routine...

Output with the current function:

Array
(
    [100] => Array
        (
            [0] => 30
            [1] => 40
        )

    [200] => Array
        (
            [0] => 20
            [1] => 30
        )

)

This is what I want :)

down

dev at oove dot blue ¶

2 years ago

I was looking for a function like this one :
merge one ore more arrays without appending values, just override and extend the array if needed. 
Useful for merging configurations or merging json data to be saved in database (my case)

Similar to Object.assign in javascript

    public static function array_merge()
    {
        // Holds all the arrays passed
        $params = func_get_args ();
        // First array is used as the base, everything else overwrites on it
        $return = array_shift ( $params );

        if(!is_array($return))
            $return = [];
        // Merge all arrays on the first array
        foreach ( $params as $array ) {
            foreach ( $array as $key => $value ) {

                if(!isset($return[$key]) || !is_array($value)) {
                    $return[$key] = $value;
                }
                else
                {
                    $return[$key] = ArrayTools::array_merge( $return[$key], $value );
                }
            }
        }

        return $return;

    }

down

hailongzh at hotmail dot com ¶

5 years ago

Sharing my code to reserve the numeric keys:

    function revise_keys($source)
    {
        if (!is_array($source)) {
            return $source;
        }

        $target = [];

        foreach ($source as $key => $value) {
            $target['S' . $key] = revise_keys($value);
        }

        return $target;
    }

    function revert_keys($source)
    {
        if (!is_array($source)) {
            return $source;
        }

        $target = [];

        foreach ($source as $key => $value) {
            $target[substr($key, 1 - strlen($key))] = revert_keys($value);
        }

        return $target;
    }

    function enhanced_array_merge_recursive(...$candidates)
    {
        $merged = [];

        foreach ($candidates as $candidate) {
            if (!is_array($candidate)) {
                continue;
            }

            $merged = array_merge_recursive($merged, revise_keys($candidate));
        }

        return revert_keys($merged);
    }

down

gullevek at gullevek dot org ¶

5 years ago

walfs version is pretty good, but it always assumes we want numeric keys as numeric keys. There are possibilities where a numeric key is actually a string '123'

For that I modified the function so that the last argument is a true switch to turn keys can be numeric on. Default is that keys are all string.

<?php
function array_merge_recursive_simple()
{
    // croak on not enough arguemnts (we need at least two)
    if (func_num_args() < 2) {
        trigger_error(__FUNCTION__ .' needs two or more array arguments', E_USER_WARNING);
        return;
    }
    // default key is not string
    $key_is_string = false;
    $arrays = func_get_args();
    // if last is not array, then assume it is trigger for key is always string
    if (!is_array(end($arrays))) {
        if (array_pop($arrays)) {
            $key_is_string = true;
        }
    }
    // check that arrays count is at least two, else we don't have enough
    if (count($arrays) < 2) {
        trigger_error(__FUNCTION__.' needs two or more array arguments', E_USER_WARNING);
        return;
    }
    $merged = array();
    while ($arrays) {
        $array = array_shift($arrays);
        if (!is_array($array)) {
            trigger_error(__FUNCTION__ .' encountered a non array argument', E_USER_WARNING);
            return;
        }
        if (!$array) {
            continue;
        }
        foreach ($array as $key => $value) {
            if (is_string($key) || $key_is_string === false) {
                if (is_array($value) && array_key_exists($key, $merged) && is_array($merged[$key])) {
                    $merged[$key] = call_user_func(__FUNCTION__, $merged[$key], $value, $key_is_string);
                } else {
                    $merged[$key] = $value;
                }
            } else {
                $merged[] = $value;
            }
        }
    }
    return $merged;
}
?>

down

Anonymous ¶

9 years ago

Attention. 
(used PHP 5.4. XAMPP)

Values with numeric keys are always appended.   The index of the merge array is determined by the startindex of the first array. Value4s with numeric keys seems always appended.
If a key looks like an integer, array_merge_recursive will interpret the string as an number.

In the example  $arr['farbe']['22'] = 'grün' wil be found after array_merge_recursive in $res['farbe'][33]

$ar1 = array("farbe" => array (31 => 'holla', "rot", "favorit" => "gelb2"), "favorit" => "gelb1", 5);
$ar2 = array(10, "farbe" => array ('22' => "grün",  "favorit" => 2, "blau"));
$result = array_merge_recursive ($ar1, $ar2);
var_dump($result);
echo('<hr>');

// var_dump
array(4) {
  ["farbe"]=>
  array(5) {
    [31]=>
    string(5) "holla"
    [32]=>
    string(3) "rot"
    ["favorit"]=>
    array(2) {
      [0]=>
      string(5) "gelb2"
      [1]=>
      int(2)
    }
    [33]=>
    string(5) "grün"
    [34]=>
    string(4) "blau"
  }
  ["favorit"]=>
  string(5) "gelb1"
  [0]=>
  int(5)
  [1]=>
  int(10)
}

down

-1

zubkov dot rabota at gmail dot com ¶

7 years ago

This recursive array merge function doesn't renumber integer keys and appends new values to existing ones OR adds a new [key => value] pair if the pair doesn't exist. 

function array_merge_recursive_adv(array &$array1, $array2) {
        if(!empty($array2) && is_array($array2))
            foreach ($array2 as $key => $value) {
                    if(array_key_exists($key,$array1)) {
                        if(is_array($value)){
                            array_merge_recursive_adv($array1[$key], $value);
                        } else {
                             if(!empty($array1[$key])) {
                                if(is_array($array1[$key])){
                                    array_push($array1[$key], $value);
                                } else {
                                    $array1[$key] = [$array1[$key]];
                                    $array1[$key][] = $value;
                                }
                             } else if(empty($array1[$key])) {
                                $array1[$key] = $value;
                             }
                        }
                    } else {
                        $array1[$key] = $value;
                    }
            }
            return $array1;
    }

down

-2

zubkov dot rabota at gmail dot com ¶

7 years ago

This recursive array merge function doesn't renumber integer keys and appends new values to existing ones OR adds a new [key => value] pair if the pair doesn't exist. 

function array_merge_recursive_adv(array &$array1, $array2) {
        if(!empty($array2) && is_array($array2))
            foreach ($array2 as $key => $value) {
                    if(array_key_exists($key,$array1)) {
                        if(is_array($value)){
                            array_merge_recursive_adv($array1[$key], $value);
                        } else {
                             if(!empty($array1[$key])) {
                                if(is_array($array1[$key])){
                                    array_push($array1[$key], $value);
                                } else {
                                    $array1[$key] = [$array1[$key]];
                                    $array1[$key][] = $value;
                                }
                             } else if(empty($array1[$key])) {
                                $array1[$key] = $value;
                             }
                        }
                    } else {
                        $array1[$key] = $value;
                    }
            }
            return $array1;
    }

down

-1

Anonymous ¶

8 years ago

Proper simplistic example:

<?php

$Array1 = [1, 2];
$Array2 = [3, 4];

echo implode("<br>", array_merge_recursive($Array1, $Array2));

?>

Output:
1
2
3
4

down

php at metehanarslan dot com ¶

10 years ago

Sometimes you need to modify an array with another one here is my approach to replace an array's content recursively with delete opiton. Here i used "::delete::" as reserved word to delete items.

<?php
$person= array(
    "name" => "Metehan",
    "surname"=>"Arslan",
    "age"=>27,
    "mail"=>"hidden",
    "favs" => array(
        "language"=>"php",
        "planet"=>"mercury",
        "city"=>"istanbul")
);

$newdata = array(
    "age"=>28,
    "mail"=>"::delete::",
    "favs" => array(
        "language"=>"js",
        "planet"=>"mercury",
        "city"=>"shanghai")
);

print_r(array_overlay($person,$newdata));
// result: Array ( [name] => Metehan [surname] => Arslan [age] => 28 [favs] => Array ( [language] => js [planet] => mercury [city] => shanghai ) )

function array_overlay($a1,$a2)
{
    foreach($a1 as $k => $v) {
        if ($a2[$k]=="::delete::"){
            unset($a1[$k]);
            continue;
        };
        if(!array_key_exists($k,$a2)) continue;
        if(is_array($v) && is_array($a2[$k])){
            $a1[$k] = array_overlay($v,$a2[$k]);
        }else{
            $a1[$k] = $a2[$k];
        }
        
    }
    return $a1;
}
?>

down

lsiq at papotam com ¶

14 years ago

<?php

//  this function merges an array with the $_SESSION
//  if you omit second parameter it merges to the root
//  if you give one 'path' array it is merged deeply

function arr2sess($arr, $path=array()){
   if (!is_array($arr)) return false;
   foreach($arr as $k => $v){
      if(is_array($arr[$k])) {
          $path[] = $k;
          arr2sess($arr[$k], $path);
      }else{
          $ref = &$_SESSION;
          if($path){
              foreach($path as $val){
                  if(!$ref[$val]) $ref[$val] = array();
                  $ref = &$ref[$val];
              }
          }
          $ref[$k] = $v;
      }
   }
}

session_start();
$x = array(k1=>12, k2=>array(kxx=>'forget me', kyy=>'I was allways here'));     // do you have any of this on $_SESSION
$rpl = array(k2=>array(kxx=>'I am a replaced value',kzz=>'I am a new value'));
arr2sess($x, array('deep','deep','in_session'));                                // you can use this way 
arr2sess($x);                                                                   // or this
arr2sess($rpl);                                                                 // to merge parts with the $_SESSION

$w = array(120, q=>array(199,100));                                             // works the same way on numeric keys
arr2sess($w, array('one','two'));
arr2sess($w);

echo '<pre>';
print_r($_SESSION);

?>

down

drvali at hotmail dot com ¶

15 years ago

<?php
/**
 * Merges any number of arrays of any dimensions, the later overwriting 
 * previous keys, unless the key is numeric, in whitch case, duplicated 
 * values will not be added. 
 *
 * The arrays to be merged are passed as arguments to the function.
 *
 * @access public
 * @return array Resulting array, once all have been merged
 */
function array_merge_replace_recursive() {
    // Holds all the arrays passed
    $params = & func_get_args ();
    
    // First array is used as the base, everything else overwrites on it
    $return = array_shift ( $params );
    
    // Merge all arrays on the first array
    foreach ( $params as $array ) {
        foreach ( $array as $key => $value ) {
            // Numeric keyed values are added (unless already there)
            if (is_numeric ( $key ) && (! in_array ( $value, $return ))) {
                if (is_array ( $value )) {
                    $return [] = $this->array_merge_replace_recursive ( $return [$$key], $value );
                } else {
                    $return [] = $value;
                }
                
            // String keyed values are replaced
            } else {
                if (isset ( $return [$key] ) && is_array ( $value ) && is_array ( $return [$key] )) {
                    $return [$key] = $this->array_merge_replace_recursive ( $return [$$key], $value );
                } else {
                    $return [$key] = $value;
                }
            }
        }
    }
    
    return $return;
}

$a = array (
    "a" => 1, 
    "b" => 2, 
    'foo', 
    'bar' 
);
$b = array (
    "a" => 2, 
    "c" => 3, 
    'foo' 
);

$c = array_merge_replace_recursive ( $a, $b );
print_r ( $a );
print_r ( $b );
print_r ( $c );
?>

Output:
Array
(
    [a] => 1
    [b] => 2
    [0] => foo
    [1] => bar
)
Array
(
    [a] => 2
    [c] => 3
    [0] => foo
)
Array
(
    [a] => 2
    [b] => 2
    [0] => foo
    [1] => bar
    [c] => 3
)

down

michiel at synetic dot nl ¶

15 years ago

A small improvement upon the previously posted array_merge_recursive_distinct functions (based on daniel's version). This implementation preserves the parameter input from the original, you can pass an infinite amount of array's to merge.

<?php
function &array_merge_recursive_distinct()
{
    $aArrays = func_get_args();
    $aMerged = $aArrays[0];
    
    for($i = 1; $i < count($aArrays); $i++)
    {
        if (is_array($aArrays[$i]))
        {
            foreach ($aArrays[$i] as $key => $val)
            {
                if (is_array($aArrays[$i][$key]))
                {
                    $aMerged[$key] = is_array($aMerged[$key]) ? PR::array_merge_recursive_distinct($aMerged[$key], $aArrays[$i][$key]) : $aArrays[$i][$key];
                }
                else
                {
                    $aMerged[$key] = $val;
                }
            }
        }
    }
    
    return $aMerged;
}
?>

down

randallgirard at hotmail dot com ¶

17 years ago

I wrote the following for merging arrays, in my project mainly for configuration... Thought someone else might find it usefull.

function array_merge_recursive_keys( $first, $second, $greedy=false) {
   $inter = array_intersect_assoc(array_keys($first), array_keys($second)); # shaired keys
# the idea next, is to strip and append from $second into $first
   foreach ( $inter as $key ) {
   # recursion if both are arrays
      if ( is_array($first[$key]) && is_array($second[$key]) ) {
         $first[$key] = array_merge_recursive_keys($first[$key], $second[$key]);
      }
   # non-greedy array merging:
      else if ( is_array($first[$key] && !$greedy ) ) {
         $first[$key][] = $second[$key];
      }
      else if ( is_array($second[$key]) && !$greedy ) {
         $second[$key][] = $first[$key];
         $first[$key] = $second[$key];
      }
   # overwrite...
      else {
         $first[$key] = $second[$key];
      }
      unset($second[$key]);
   }
# merge the unmatching keys onto first
   return array_merge($first, $second);
}

down

thiago dot mata at yahoo dot com dot br ¶

18 years ago

<?php
    function array_merge_recursive_keep_keys( $arrElement1 , $arrElement2 , $intCount = 0 )
    {

        $arrNew = array();
        
        $arrElement1Keys = array_keys( $arrElement1 );
        $arrElement2Keys = array_keys( $arrElement2 );
        
        $arrDifKeys1 = array_diff( $arrElement1Keys, $arrElement2Keys );
        $arrDifKeys2 = array_diff( $arrElement2Keys, $arrElement1Keys );
        $arrInter     = array_intersect( $arrElement1Keys , $arrElement2Keys );

        foreach( $arrDifKeys1 as $strKey1)
        {
            $arrNew[ $strKey1 ] = $arrElement1[ $strKey1 ];
        }
        foreach( $arrDifKeys2 as $strKey2)
        {
            $arrNew[ $strKey2 ] = $arrElement2[ $strKey2 ];
        }
        foreach( $arrInter as $strInterKey )
        {
            if( is_array( $arrElement1[ $strInterKey ] ) && is_array( $arrElement2[ $strInterKey ] ) )
            {
                $intCount++;
                $arrNew[ $strInterKey ] = array_merge_recursive_keep_keys( $arrElement1[ $strInterKey ] , $arrElement2[ $strInterKey ] , $intCount );
            }
            elseif( is_array( $arrElement1[ $strInterKey ] ) || is_array( $arrElement2[ $strInterKey ] ) )
            {
                $arrNew[ $strInterKey ][]    =  $arrElement1[ $strInterKey ];
                $arrNew[ $strInterKey ][]    =  $arrElement2[ $strInterKey ];
            }
            else
            {
                $arrNew[ $strInterKey ] = array();
                $arrNew[ $strInterKey ][] = $arrElement1[ $strInterKey ];
                $arrNew[ $strInterKey ][] = $arrElement2[ $strInterKey ];
            }
        }
        return $arrNew;
    }    
?>

down

paska at kios dot sk ¶

20 years ago

This emulates replace of $_REQUEST according to variable_order=GPC.
<?
    function array_merge_replace($array, $newValues) {
        foreach ($newValues as $key => $value ) {
            if (is_array($value)) {
                if (!isset($array[$key])) {
                    $array[$key] = array();
                }
                $array[$key] = array_merge_replace($array[$key], $value);
            } else {
                $array[$key] = $value;
            }
        }
        return $array;
    }

    $_REQUEST = array_merge_replace($_REQUEST, $_GET);
    $_REQUEST = array_merge_replace($_REQUEST, $_POST);
    $_REQUEST = array_merge_replace($_REQUEST, $_COOKIE);
?>

Useful with stripping backslashes at beginning of main include file:
<?
if (get_magic_quotes_gpc() == 1) {

    function stripMagicSlashes($element) {
        if (is_array($element)) {
            return array_map("stripMagicSlashes", $element);
        } else {
            return stripslashes($element);
        }
    }

    function array_merge_replace($array, $newValues) {
        foreach ($newValues as $key => $value ) {
            if (is_array($value)) {
                if (!isset($array[$key])) {
                    $array[$key] = array();
                }
                $array[$key] = array_merge_replace($array[$key], $value);
            } else {
                $array[$key] = $value;
            }
        }
        return $array;
    }

    $_GET    = array_map("stripMagicSlashes", $_GET);
    $_POST   = array_map("stripMagicSlashes", $_POST);
    $_COOKIE = array_map("stripMagicSlashes", $_COOKIE);

    $_REQUEST = array_merge_replace($_REQUEST, $_GET);
    $_REQUEST = array_merge_replace($_REQUEST, $_POST);
    $_REQUEST = array_merge_replace($_REQUEST, $_COOKIE);

}

$GLOBALS['stripped'] = true;
?>

Based on examples from users from this site.

down

-1

manicdepressive at mindless dot com ¶

20 years ago

Please be aware that under circumstances where you have 
both the key and value common between the two arrays at a given node,
array_merge_recursive() will behave differently if that value is NULL,
as opposed to a non-null value.

i.e., I expected the results of the first two sections below to 
have the same structure, but they don't.  
If this might apply to you, please see for yourself.

<pre><?php

$a1 = array('a'=>'b');
$a2 = array('a'=>'b');
$a3 = array_merge_recursive($a1,$a2);
var_export($a3); 
echo "\n\n";

$a1 = array('a'=>NULL);
$a2 = array('a'=>NULL);
$a3 = array_merge_recursive($a1,$a2);
var_export($a3);
echo "\n\n";

$a1 = array('a'=>'b');
$a2 = array('a'=>NULL);
$a3 = array_merge_recursive($a1,$a2);
var_export($a3);
echo "\n\n";

?></pre>

This behavior also occurs if the value is the empty array.
In fact, in the above example, interchanging the empty array with
any and all occurences of NULL will yield the same result.

    code till dawn!  -mark

down

-1

felix dot ospald at gmx dot de ¶

16 years ago

If you desire correct and performant behaviour (in contrast to the other postings) use this code. It works as documented above.
If you want that keys are always perserved and not appended or renumbered if they are numeric comment out the "if (((string) $key) === ((string) intval($key)))" case.
@spambegone at cratemedia dot com: using empty is not right way to check if an item is in the array use isset!

<?php

function array_merge_recursive2($array1, $array2)
{
    $arrays = func_get_args();
    $narrays = count($arrays);
    
    // check arguments
    // comment out if more performance is necessary (in this case the foreach loop will trigger a warning if the argument is not an array)
    for ($i = 0; $i < $narrays; $i ++) {
        if (!is_array($arrays[$i])) {
            // also array_merge_recursive returns nothing in this case
            trigger_error('Argument #' . ($i+1) . ' is not an array - trying to merge array with scalar! Returning null!', E_USER_WARNING);
            return;
        }
    }
    
    // the first array is in the output set in every case
    $ret = $arrays[0];
    
    // merege $ret with the remaining arrays
    for ($i = 1; $i < $narrays; $i ++) {
        foreach ($arrays[$i] as $key => $value) {
            if (((string) $key) === ((string) intval($key))) { // integer or string as integer key - append
                $ret[] = $value;
            }
            else { // string key - megre
                if (is_array($value) && isset($ret[$key])) {
                    // if $ret[$key] is not an array you try to merge an scalar value with an array - the result is not defined (incompatible arrays)
                    // in this case the call will trigger an E_USER_WARNING and the $ret[$key] will be null.
                    $ret[$key] = array_merge_recursive2($ret[$key], $value);
                }
                else {
                    $ret[$key] = $value;
                }
            }
        }    
    }
    
    return $ret;
}

// Examples:

print_r(array_merge_recursive2(array('A','B','C' => array(1,2,3)), array('D','C' => array(1,4))));
/*
Array
(
    [0] => A
    [1] => B
    [C] => Array
        (
            [0] => 1
            [1] => 2
            [2] => 3
            [3] => 1
            [4] => 4
        )
    [2] => D
)*/

print_r(array_merge_recursive2(array('A','B','0' => array(1,2,3)), array('D','0' => array(1,array(4)))));
/*
Array
(
    [0] => Array
        (
            [0] => 1
            [1] => 2
            [2] => 3
        )
    [1] => B
    [2] => Array
        (
            [0] => 1
            [1] => Array
                (
                    [0] => 4
                )
        )
)*/

print_r(array_merge_recursive2(array('A' => array('A' => 1)), array('A' => array('A' => array(2)))));
/*
Warning: Argument #1 is not an array - trying to merge array with scalar! Returning null! in ... on line ...
*/

var_dump(array_merge_recursive2(array('A' => array('A' => 2)), array('A' => array('A' => null))));
/*
array(1) { ["A"]=>  array(1) { ["A"]=>  NULL } }
*/

?>

down

-1

Orhan POLAT ¶

9 years ago

Merging arrays recursively some problem about existing keys, so that i wrote the function above like this:

function merge($array0, $array1) {
  // Result
  $merged = array();

  foreach (func_get_args() as $array) {
   // Check incoming argument is array
   if (is_array($array)) {
    foreach ($array as $key => $value) {
     // Check there is an array with the key: $key
     if (isset($merged[$key])) {
      // Check the value is array
      if (is_array($value)) {
       // So we must merge current value with the existing array
       $merged[$key] = call_user_func_array(__FUNCTION__, $merged[$key], $value);
      } else {
       if (!is_array($merged[$key])) {
        // If the existing array with the key: $key not an array
        // We make it an array
        $merged[$key] = array($merged[$key]);
       }

       // And add the current value
       $merged[$key][] = $value;
      }
     } else {
      // If not exists make the array
      $merged[$key] = $value;
     }
    }
   }
  }

  return $merged;
 }

down

-1

scott dot clark at vizioninteractive dot com ¶

16 years ago

Needed some way to fuse two arrays together and found a function here (below from thomas) and decided to update it even further to be a little more smart.



<?php

function my_array_merge ($arr,$ins)

    {

        if(is_array($arr))

            {

                if(is_array($ins)) foreach($ins as $k=>$v)

                    {

                        if(isset($arr[$k])&&is_array($v)&&is_array($arr[$k]))

                            {

                                $arr[$k] = my_array_merge($arr[$k],$v);

                            }

                        else $arr[$k] = $v;

                    }

            }

        elseif(!is_array($arr)&&(strlen($arr)==0||$arr==0))

            {

                $arr=$ins;

            }

        return($arr);

    }

?>

down

-2

smilingrasta ¶

18 years ago

This function tends to reindex arrays, which is not  mentioned in the function description.

I just tried to run that function on a three dimensional array, containing errormessages.
The first dim. contains the severity of the error ('warn', 'crit') the second dim the linenumber (numerical) and the third one consists of errormessages

<?php
# Array printout:
Array
 (
   [warn] => Array  // severity (associative)
    (
      [2] => Array  // linenumber (numerical)
       (
         [0] => "Category does not exist" 
         [1] => "Manufacturer does not exist"
       )
    )
 )

?>

If i now merge two or more of those arrays using array_merge_recursive(), the linenumbers are not conserved. Instead of, they are all renumbered, starting with 0.

Just thought anyone may want to know about that. :)
regards, smilingrasta

down

-3

cezarion at cezarion dot net ¶

10 years ago

An updated version of  array_merge_recursive without overwriting numeric keys from martyniuk : 
function array_merge_recursive_new()
 {
    $arrays = func_get_args();
        $base = array_shift($arrays);

        foreach ($arrays as $array) {
            reset($base); //important
            while (list($key, $value) = @each($array)) {
                if (is_array($value) && @is_array($base[$key])) {
                    $base[$key] = array_merge_recursive_new($base[$key], $value);
                } else {
                    if(isset($base[$key]) && is_int($key)) {
                      $key++;
                    }
                    $base[$key] = $value;
                }
            }
        }

    return $base;
  }

down

-4

karl (dot) hepler (at) gmail (dot) com ¶

8 years ago

I ran into a fairly unique situation where array_merge_recursive ALMOST did what I wanted, but NOT QUITE. I read through all of the comments, and I didn't find anything that really helped me. I saw a lot of functions submitted that were just trying to recreate array_replace_recursive. This is not that.

Take a look at the code and try it out. Hopefully it helps someone in need!

class Arr
{
    /**
     * Merge multiple arrays.
     *
     * This is similar to, but slightly different than array_merge_recursive.
     * The main difference is that it will merge like keys in subarrays,
     * instead of simply pushing them into the output array.
     *
     * @param  array ...$array
     *
     * @return array
     */
    public static function merge()
    {
        /** Initialize the output array */
        $merged = [];

        /** Go through each argument */
        foreach (func_get_args() as $array) {
            /** Go through each key/value of this array */
            foreach ($array as $key => $value) {
                /**
                 * If this key isn't set on merged,
                 * then it needs to be set for the first time
                 */
                if (! isset($merged[$key])) {
                    /**
                     * Before we can set it, we must make sure
                     * to dive into this value if it is an array,
                     * so that all of its children will be processed.
                     */
                    if (is_array($value)) {
                        $value = static::merge($value);
                    }

                    /**
                     * Now that we're happy with this value,
                     * and we're sure that, if it is an array,
                     * all of its children have been processed,
                     * let's go ahead and set it.
                     */
                    $merged[$key] = $value;

                    /** We can skip the rest of the loop */
                    continue;
                }

                /**
                 * We're here because we want to set a key
                 * that is already set on merged. We don't want
                 * to overwrite anything - we want to add to it.
                 * So, we need to make sure that we're working with an array.
                 */
                if (! is_array($merged[$key])) {
                    $merged[$key] = [$merged[$key]];
                }

                /**
                 * Before we push the value onto the array,
                 * we need to check to see if it is an array itself.
                 * If it is, then we need to make sure all of its children
                 * are processed. We do this by merging all of the children
                 * together. This is where it differs from array_merge_recursive,
                 * which would simply push the children onto the end of the array.
                 */
                if (is_array($value)) {
                    $value = forward_static_call_array([Arr::class, 'merge'], $value);
                }

                /** Now we're ready to push the value into merged */
                $merged[$key][] = $value;
            }
        }

        /** Return the merged array */
        return $merged;
    }
}

＋add a note