strripos

(PHP 5, PHP 7, PHP 8)

strripos文字列中で、特定の(大文字小文字を区別しない)文字列が最後に現れた位置を探す

説明

strripos(string $haystack, string $needle, int $offset = 0): int|false

文字列 haystack の中で、 needle が最後に現れる位置を探します。

strrpos() と異なり、strripos() は大文字小文字を区別しません。

パラメータ

haystack

検索対象の文字列。

needle

検索する文字列。

PHP 8.0.0 より前のバージョンでは、needle が文字列でない場合、 数値に変換され、文字の通常の値として扱われていました。 この振る舞いは PHP 7.3.0 以降では推奨されないので、 この機能を使用しないことを強く推奨します。 意図した動作に依存する場合、 needle を string に明示的にキャストするか、 明示的に chr() 関数を呼び出すべきでしょう。

offset

ゼロまたは正の値の場合、 haystack の 最初の offset バイトをスキップし、 左から右に検索が行われます。

負の値の場合、 haystack の 最後の offset バイトをスキップし、 右から左に検索が行われ、 needle が最初に現れる場所を探します。

注意:

この方が、最後の offset バイトより前にある、 最後の needle を効率的に探せます。

戻り値

needle が見つかった位置を、 haystack 文字列の先頭 (offset の値とは無関係) からの相対位置で返します。

注意: 文字列の開始位置は 0 であり、1 ではありません。

needle が見つからない場合は false を返します。

警告

この関数は論理値 false を返す可能性がありますが、false として評価される値を返す可能性もあります。 詳細については 論理値の セクションを参照してください。この関数の返り値を調べるには ===演算子 を 使用してください。

変更履歴

バージョン 説明
8.0.0 needle は、空文字列を受け入れるようになりました。
8.2.0 ケースフォールディングは、setlocale() で設定されたロケールに依存しなくなりました。 ASCII のケースフォールディングのみが行われます。 ASCII でないバイト列は、バイト値として比較されます。
8.0.0 needle に数値を渡すことはサポートされなくなりました。
7.3.0 needle に数値を渡すことは非推奨になりました。

例1 単純な strripos() の例

<?php
$haystack
= 'ababcd';
$needle = 'aB';

$pos = strripos($haystack, $needle);

if (
$pos === false) {
echo
"ごめんなさい、($needle) が ($haystack) の中に見つかりませんでした。";
} else {
echo
"おめでとう!\n";
echo
"($needle) が最後に ($haystack) に現れた位置は ($pos) です。";
}
?>

上の例の出力は以下となります。

おめでとう!
   (aB) が最後に (ababcd) に現れた位置は (2) です。

参考

  • strpos() - 文字列内の部分文字列が最初に現れる場所を見つける
  • stripos() - 大文字小文字を区別せずに文字列が最初に現れる位置を探す
  • strrpos() - 文字列中に、ある部分文字列が最後に現れる場所を探す
  • strrchr() - 文字列中に文字が最後に現れる場所を取得する
  • stristr() - 大文字小文字を区別しない strstr
  • substr() - 文字列の一部分を返す

add a note

User Contributed Notes 6 notes

up
5
Yanik Lupien
18 years ago
Simple way to implement this function in PHP 4<?phpif (function_exists('strripos') == false) {    function strripos($haystack, $needle) {        return strlen($haystack) - strpos(strrev($haystack), $needle);    }}?>
up
2
dimmav at in dot gr
16 years ago
Suppose you just need a stripos function working backwards expecting that strripos does this job, you better use the following code of a custom function named strbipos:<?phpfunction strbipos($haystack="", $needle="", $offset=0) {// Search backwards in $haystack for $needle starting from $offset and return the position found or false    $len = strlen($haystack);    $pos = stripos(strrev($haystack), strrev($needle), $len - $offset - 1);    return ( ($pos === false) ? false : $len - strlen($needle) - $pos );}// Test$body = "01234Xy7890XYz456xy90";$str = "xY";$len = strlen($body);echo "TEST POSITIVE offset VALUES IN strbipos<br>";for ($i = 0; $i < $len; $i++) {    echo "Search in [$body] for [$str] starting from offset [$i]: [" . strbipos($body, $str, $i) . "]<br>";}?>Note that this function does exactly what it says and its results are different comparing to PHP 5 strripos function.
up
1
peev[dot]alexander at gmail dot com
17 years ago
I think you shouldn't underestimate the length of $needle in the search of THE FIRST POSITION of it's last occurrence in the string. I improved the posted function, with added support for offset. I think this is an exact copy of the real function:<?phpif(!function_exists("strripos")){    function strripos($haystack, $needle, $offset=0) {        if($offset<0){            $temp_cut = strrev(  substr( $haystack, 0, abs($offset) )  );        }        else{            $temp_cut = strrev(  substr( $haystack, $offset )  );        }        $pos = strlen($haystack) - (strpos($temp_cut, strrev($needle)) + $offset + strlen($needle));        if ($pos == strlen($haystack)) { $pos = 0; }        return $pos;    }/* endfunction strripos*/}/* endfunction exists strripos*/?>
up
-1
peev[dot]alexander at gmail dot com
17 years ago
OK, I guess this will be the final function implementation for PHP 4.x versions ( my previous posts are invalid )<?phpif(!function_exists("stripos")){    function stripos(  $str, $needle, $offset = 0  ){        return strpos(  strtolower( $str ), strtolower( $needle ), $offset  );    }/* endfunction stripos */}/* endfunction exists stripos */if(!function_exists("strripos")){    function strripos(  $haystack, $needle, $offset = 0  ) {        if(  !is_string( $needle )  )$needle = chr(  intval( $needle )  );        if(  $offset < 0  ){            $temp_cut = strrev(  substr( $haystack, 0, abs($offset) )  );        }        else{            $temp_cut = strrev(    substr(   $haystack, 0, max(  ( strlen($haystack) - $offset ), 0  )   )    );        }        if(   (  $found = stripos( $temp_cut, strrev($needle) )  ) === FALSE   )return FALSE;        $pos = (   strlen(  $haystack  ) - (  $found + $offset + strlen( $needle )  )   );        return $pos;    }/* endfunction strripos */}/* endfunction exists strripos */?>
up
-2
Anonymous
14 years ago
Generally speaking, linear searches are from start to end, not end to start - which makes sense from a human perspective. If you need to find strings in a string backwards, reverse your haystack and needle rather than manually chopping it up.
up
-3
ElectroFox
18 years ago
Sorry, I made that last post a bit prematurely.  One more thing wrong with the simple php4 version is that it breaks if the string is not found.  It should actually look like this:<?phpif (function_exists('strripos') == false) {    function strripos($haystack, $needle) {        $pos = strlen($haystack) - strpos(strrev($haystack), strrev($needle));        if ($pos == strlen($haystack)) { $pos = 0; }        return $pos;    }}?>Note, we now check to see if the $needle was found, and if it isn't, we return 0.
To Top