strpos

(PHP 4, PHP 5, PHP 7, PHP 8)

strpos — Encontra a posição da primeira ocorrência de uma substring em uma string

Descrição

strpos(string $haystack, string $needle, int $offset = 0): int|false

Encontra a posição numérica da primeira ocorrência de needle na string haystack.

Parâmetros

haystack

A string onde a substring será pesquisada.

needle

A substring a ser procurada.

Antes do PHP 8.0.0, se needle não for uma string, ela será convertida para um número inteiro e aplicada como o valor ordinal de um caractere. Este comportamento tornou-se defasado a partir do PHP 7.3.0 e depender dele é altamente desaconselhado. Dependendo do comportamento pretendido, o parâmetro needle deve ser explicitamente convertido em string ou uma chamada explícita para chr() deve ser realizada.

offset

Se especificado, a pesquisa iniciará nessa posição de caractere contada a partir do início da string. Se for negativo, a pesquisa iniciará nessa posição de caractere contada a partir do final da string.

Valor Retornado

Retorna a posição em que a substring existe relativa ao início da string haystack (independente do offset). Observe também que as posições de string iniciam em 0, e não em 1.

Retorna false se a substring não for encontrada.

Aviso

Esta função pode retornar o valor booleano false, mas também pode retornar um valor não booleano que pode ser avaliado como false. Leia a seção sobre Booleanos para mais informações. Use o operador === para testar o valor retornado por esta função.

Registro de Alterações

Versão	Descrição
8.0.0	O parâmetro `needle` agora aceita uma string vazia.
8.0.0	Passar um int em `needle` não é mais suportado.
7.3.0	Passar um int em `needle` tornou-se defasado.
7.1.0	Suporte a `offset` negativo foi adicionado.

Exemplos

Exemplo #1 Usando ===

<?php
$mystring = 'abc';
$findme   = 'a';
$pos = strpos($mystring, $findme);

// Observe o uso de ===. Simplesmente == não funcionaria como esperado
// porque o caractere 'a' fica na posição 0 (primeira) da string.
if ($pos === false) {
    echo "A string '$findme' não foi encontrada em '$mystring'";
} else {
    echo "A string '$findme' foi encontrada em '$mystring'";
    echo " e existe na posição $pos";
}
?>

Exemplo #2 Usando !==

<?php
$mystring = 'abc';
$findme   = 'a';
$pos = strpos($mystring, $findme);

// O operador !== também pode ser usado. Usar != não funcionaria como esperado
// porque a posição de 'a' é 0. A comparação (0 != false) é avaliada
// como falsa.
if ($pos !== false) {
     echo "A string '$findme' foi encontrada em '$mystring'";
         echo " e existe na posição $pos";
} else {
     echo "A string '$findme' não foi encontrada em '$mystring'";
}
?>

Exemplo #3 Usando um deslocamento

<?php
// Pode-se procurar um caractere, ignorando tudo antes do deslocamento
$newstring = 'abcdef abcdef';
$pos = strpos($newstring, 'a', 1); // $pos = 7, e não 0
?>

Notas

Nota: Esta função é compatível com dados binários.

Veja Também

stripos() - Encontra a posição da primeira ocorrência de uma substring em uma string, de forma insensível a maiúsculas/minúsculas
str_contains() - Determina se uma string contém uma substring fornecida
str_ends_with() - Verifica se uma string termina com uma substring fornecida
str_starts_with() - Verifica se uma string começa com uma substring fornecida
strrpos() - Encontra a posição da última ocorrência de uma substring em uma string
strripos() - Encontra a posição da última ocorrência de uma substring em uma string, insensível a miúsculas/minúsculas
strstr() - Encontra a primeira ocorrência de uma string
strpbrk() - Procura na string por um dos caracteres de um conjunto
substr() - Retorna parte de uma string
preg_match() - Realiza uma correspondência com expressão regular

Melhore Esta Página

Aprenda Como Melhorar Esta Página • Envie uma Solicitação de Modificação • Reporte um Problema

＋adicione uma nota

Notas Enviadas por Usuários (em inglês) 35 notes

down

221

16 years ago

WARNING

As strpos may return either FALSE (substring absent) or 0 (substring at start of string), strict versus loose equivalency operators must be used very carefully.

To know that a substring is absent, you must use:  

=== FALSE

To know that a substring is present (in any position including 0), you can use either of:

!== FALSE  (recommended)
 > -1  (note: or greater than any negative number)

To know that a substring is at the start of the string, you must use:  

=== 0

To know that a substring is in any position other than the start, you can use any of: 

 > 0  (recommended)
!= 0  (note: but not !== 0 which also equates to FALSE)
!= FALSE  (disrecommended as highly confusing)

Also note that you cannot compare a value of "" to the returned value of strpos. With a loose equivalence operator (== or !=) it will return results which don't distinguish between the substring's presence versus position. With a strict equivalence operator (=== or !==) it will always return false.

down

fabio at naoimporta dot com ¶

8 years ago

It is interesting to be aware of the behavior when the treatment of strings with characters using different encodings.

<?php
# Works like expected. There is no accent
var_dump(strpos("Fabio", 'b'));
#int(2)

# The "á" letter is occupying two positions
var_dump(strpos("Fábio", 'b')) ;
#int(3)

# Now, encoding the string "Fábio" to utf8, we get some "unexpected" outputs. Every letter that is no in regular ASCII table, will use 4 positions(bytes). The starting point remains like before.
# We cant find the characted, because the haystack string is now encoded.
var_dump(strpos(utf8_encode("Fábio"), 'á'));
#bool(false)

# To get the expected result, we need to encode the needle too
var_dump(strpos(utf8_encode("Fábio"), utf8_encode('á')));
#int(1) 

# And, like said before, "á" occupies 4 positions(bytes)
var_dump(strpos(utf8_encode("Fábio"), 'b'));
#int(5)

down

martijn at martijnfrazer dot nl ¶

12 years ago

This is a function I wrote to find all occurrences of a string, using strpos recursively.

<?php
function strpos_recursive($haystack, $needle, $offset = 0, &$results = array()) {                
    $offset = strpos($haystack, $needle, $offset);
    if($offset === false) {
        return $results;            
    } else {
        $results[] = $offset;
        return strpos_recursive($haystack, $needle, ($offset + 1), $results);
    }
}
?>

This is how you use it:

<?php
$string = 'This is some string';
$search = 'a';
$found = strpos_recursive($string, $search);

if($found) {
    foreach($found as $pos) {
        echo 'Found "'.$search.'" in string "'.$string.'" at position <b>'.$pos.'</b><br />';
    }    
} else {
    echo '"'.$search.'" not found in "'.$string.'"';
}
?>

down

mtroy dot student at gmail dot com ¶

12 years ago

when you want to know how much of substring occurrences, you'll use "substr_count".
But, retrieve their positions, will be harder.
So, you can do it by starting with the last occurrence :

function strpos_r($haystack, $needle)
{
    if(strlen($needle) > strlen($haystack))
        trigger_error(sprintf("%s: length of argument 2 must be <= argument 1", __FUNCTION__), E_USER_WARNING);

    $seeks = array();
    while($seek = strrpos($haystack, $needle))
    {
        array_push($seeks, $seek);
        $haystack = substr($haystack, 0, $seek);
    }
    return $seeks;
}

it will return an array of all occurrences a the substring in the string

Example : 

$test = "this is a test for testing a test function... blah blah";
var_dump(strpos_r($test, "test"));

// output 

array(3) {
  [0]=>
  int(29)
  [1]=>
  int(19)
  [2]=>
  int(10)
}

Paul-antoine
Malézieux.

down

m.m.j.kronenburg ¶

8 years ago

<?php

/**
 * Find the position of the first occurrence of one or more substrings in a 
 * string.
 * 
 * This function is simulair to function strpos() except that it allows to 
 * search for multiple needles at once.
 *
 * @param string $haystack    The string to search in.
 * @param mixed $needles      Array containing needles or string containing 
 *                            needle.
 * @param integer $offset     If specified, search will start this number of 
 *                            characters counted from the beginning of the 
 *                            string.
 * @param boolean $last       If TRUE then the farthest position from the start 
 *                            of one of the needles is returned.
 *                            If FALSE then the smallest position from start of 
 *                            one of the needles is returned.
 **/
function mstrpos($haystack, $needles, $offset = 0, $last = false)
{
  if(!is_array($needles)) { $needles = array($needles); }
  $found = false;
  foreach($needles as $needle)
  {
    $position = strpos($haystack, (string)$needle, $offset);
    if($position === false) { continue; }
    $exp = $last ? ($found === false || $position > $found) : 
      ($found === false || $position < $found);
    if($exp) { $found = $position; }
  }
  return $found;
}

/**
 * Find the position of the first (partially) occurrence of a substring in a 
 * string.
 * 
 * This function is simulair to function strpos() except that it wil return a 
 * position when the substring is partially located at the end of the string.
 *
 * @param string $haystack    The string to search in.
 * @param mixed $needle       The needle to search for.
 * @param integer $offset     If specified, search will start this number of 
 *                            characters counted from the beginning of the 
 *                            string.
 **/
function pstrpos($haystack, $needle, $offset = 0)
{
  $position = strpos($haystack, $needle, $offset);
  if($position !== false) { return $position; }
  
  for($i = strlen($needle); $i > 0; $i--)
  {
    if(substr($needle, 0, $i) == substr($haystack, -$i))
    { return strlen($haystack) - $i; }
  }
  return false;
}

/**
 * Find the position of the first (partially) occurrence of one or more 
 * substrings in a string.
 * 
 * This function is simulair to function strpos() except that it allows to 
 * search for multiple needles at once and it wil return a position when one of
 * the substrings is partially located at the end of the string.
 *
 * @param string $haystack    The string to search in.
 * @param mixed $needles      Array containing needles or string containing 
 *                            needle.
 * @param integer $offset     If specified, search will start this number of 
 *                            characters counted from the beginning of the 
 *                            string.
 * @param boolean $last       If TRUE then the farthest position from the start 
 *                            of one of the needles is returned.
 *                            If FALSE then the smallest position from start of 
 *                            one of the needles is returned.
 **/
function mpstrpos($haystack, $needles, $offset = 0, $last = false)
{
  if(!is_array($needles)) { $needles = array($needles); }
  $found = false;
  foreach($needles as $needle)
  {
    $position = pstrpos($haystack, (string)$needle, $offset);
    if($position === false) { continue; }
    $exp = $last ? ($found === false || $position > $found) : 
      ($found === false || $position < $found);
    if($exp) { $found = $position; }
  }
  return $found;
}

?>

down

greg at spotx dot net ¶

6 years ago

Warning:
this is not unicode safe

strpos($word,'?') in e?ez-> 1 
strpos($word,'?') in è?ent-> 2

down

rjeggens at ijskoud dot org ¶

12 years ago

I lost an hour before I noticed that strpos only returns FALSE as a boolean, never TRUE.. This means that

strpos() !== false 

is a different beast then:

strpos() === true

since the latter will never be true. After I found out, The warning in the documentation made a lot more sense.

down

jexy dot ru at gmail dot com ¶

7 years ago

Docs are missing that WARNING is issued if needle is '' (empty string).

In case of empty haystack it just return false:

For example:

<?php
var_dump(strpos('foo', ''));

var_dump(strpos('', 'foo'));

var_dump(strpos('', ''));
?>

will output:

Warning: strpos(): Empty needle in /in/lADCh on line 3 
bool(false) 

bool(false) 

Warning: strpos(): Empty needle in /in/lADCh on line 7 
bool(false)

Note also that warning text may differ depending on php version, see https://3v4l.org/lADCh

down

ilaymyhat-rem0ve at yahoo dot com ¶

16 years ago

This might be useful.



<?php

class String{

    

    //Look for a $needle in $haystack in any position

    public static function contains(&$haystack, &$needle, &$offset)

    {

        $result = strpos($haystack, $needle, $offset);

        return $result !== FALSE;

    }

    

    //intuitive implementation .. if not found returns -1.

    public static function strpos(&$haystack, &$needle, &$offset)

    {

        $result = strpos($haystack, $needle, $offset);

        if ($result === FALSE )

        {

            return -1;

        }

        return $result;

    }

    

}//String

?>

down

eef dot vreeland at gmail dot com ¶

7 years ago

To prevent others from staring at the text, note that the wording of the 'Return Values' section is ambiguous.

Let's say you have a string $myString containing 50 'a's except on position 3 and 43, they contain 'b'.
And for this moment, forget that counting starts from 0.

strpos($myString, 'b', 40) returns 43, great.

And now the text: "Returns the position of where the needle exists relative to the beginning of the haystack string (independent of offset)."

So it doesn't really matter what offset I specify; I'll get the REAL position of the first occurrence in return, which is 3?

... no ...

"independent of offset" means, you will get the REAL positions, thus, not relative to your starting point (offset).

Substract your offset from strpos()'s answer, then you have the position relative to YOUR offset.

down

user at nomail dot com ¶

17 years ago

This is a bit more useful when scanning a large string for all occurances between 'tags'.

<?php
function getStrsBetween($s,$s1,$s2=false,$offset=0) {
    /*====================================================================
    Function to scan a string for items encapsulated within a pair of tags

    getStrsBetween(string, tag1, <tag2>, <offset>

    If no second tag is specified, then match between identical tags

    Returns an array indexed with the encapsulated text, which is in turn
    a sub-array, containing the position of each item.

    Notes:
    strpos($needle,$haystack,$offset)
    substr($string,$start,$length)

    ====================================================================*/

    if( $s2 === false ) { $s2 = $s1; }
    $result = array();
    $L1 = strlen($s1);
    $L2 = strlen($s2);

    if( $L1==0 || $L2==0 ) {
        return false;
    }

    do {
        $pos1 = strpos($s,$s1,$offset);

        if( $pos1 !== false ) {
            $pos1 += $L1;

            $pos2 = strpos($s,$s2,$pos1);

            if( $pos2 !== false ) {
                $key_len = $pos2 - $pos1;

                $this_key = substr($s,$pos1,$key_len);

                if( !array_key_exists($this_key,$result) ) {
                    $result[$this_key] = array();
                }

                $result[$this_key][] = $pos1;

                $offset = $pos2 + $L2;
            } else {
                $pos1 = false;
            }
        }
    } while($pos1 !== false );

    return $result;
}
?>

down

akarmenia at gmail dot com ¶

13 years ago

My version of strpos with needles as an array. Also allows for a string, or an array inside an array.

<?php
function strpos_array($haystack, $needles) {
    if ( is_array($needles) ) {
        foreach ($needles as $str) {
            if ( is_array($str) ) {
                $pos = strpos_array($haystack, $str);
            } else {
                $pos = strpos($haystack, $str);
            }
            if ($pos !== FALSE) {
                return $pos;
            }
        }
    } else {
        return strpos($haystack, $needles);
    }
}

// Test
echo strpos_array('This is a test', array('test', 'drive')); // Output is 10

?>

down

marvin_elia at web dot de ¶

6 years ago

Find position of nth occurrence of a string:

    function strpos_occurrence(string $string, string $needle, int $occurrence, int $offset = null) {
        if((0 < $occurrence) && ($length = strlen($needle))) {
            do {
            } while ((false !== $offset = strpos($string, $needle, $offset)) && --$occurrence && ($offset += $length));
            return $offset;
        }
        return false;
    }

down

digitalpbk [at] gmail.com ¶

15 years ago

This function raises a warning if the offset is not between 0 and the length of string:



Warning: strpos(): Offset not contained in string in %s on line %d

down

ohcc at 163 dot com ¶

10 years ago

Be careful when the $haystack or $needle parameter is an integer.
If you are not sure of its type, you should  convert it into a string.
<?php
    var_dump(strpos(12345,1));//false
    var_dump(strpos(12345,'1'));//0
    var_dump(strpos('12345',1));//false
    var_dump(strpos('12345','1'));//0
    $a = 12345;
    $b = 1;
    var_dump(strpos(strval($a),strval($b)));//0
    var_dump(strpos((string)$a,(string)$b));//0    
?>

down

lairdshaw at yahoo dot com dot au ¶

9 years ago

<?php
/*
 * A strpos variant that accepts an array of $needles - or just a string,
 * so that it can be used as a drop-in replacement for the standard strpos,
 * and in which case it simply wraps around strpos and stripos so as not
 * to reduce performance.
 *
 * The "m" in "strposm" indicates that it accepts *m*ultiple needles.
 *
 * Finds the earliest match of *all* needles. Returns the position of this match
 * or false if none found, as does the standard strpos. Optionally also returns
 * via $match either the matching needle as a string (by default) or the index
 * into $needles of the matching needle (if the STRPOSM_MATCH_AS_INDEX flag is
 * set).
 *
 * Case-insensitive searching can be specified via the STRPOSM_CI flag.
 * Note that for case-insensitive searches, if the STRPOSM_MATCH_AS_INDEX is
 * not set, then $match will be in the haystack's case, not the needle's case,
 * unless the STRPOSM_NC flag is also set.
 *
 * Flags can be combined using the bitwise or operator,
 * e.g. $flags = STRPOSM_CI|STRPOSM_NC
 */
define('STRPOSM_CI'            , 1); // CI => "case insensitive".
define('STRPOSM_NC'            , 2); // NC => "needle case".
define('STRPOSM_MATCH_AS_INDEX', 4);
function strposm($haystack, $needles, $offset = 0, &$match = null, $flags = 0) {
    // In the special case where $needles is not an array, simply wrap
    // strpos and stripos for performance reasons.
    if (!is_array($needles)) {
        $func = $flags & STRPOSM_CI ? 'stripos' : 'strpos';
        $pos = $func($haystack, $needles, $offset);
        if ($pos !== false) {
            $match = (($flags & STRPOSM_MATCH_AS_INDEX)
                      ? 0
                      : (($flags & STRPOSM_NC)
                         ? $needles
                         : substr($haystack, $pos, strlen($needles))
                        )
                      );
            return $pos;
        } else    goto strposm_no_match;
    }

    // $needles is an array. Proceed appropriately, initially by...
    // ...escaping regular expression meta characters in the needles.
    $needles_esc = array_map('preg_quote', $needles);
    // If either of the "needle case" or "match as index" flags are set,
    // then create a sub-match for each escaped needle by enclosing it in
    // parentheses. We use these later to find the index of the matching
    // needle.
    if (($flags & STRPOSM_NC) || ($flags & STRPOSM_MATCH_AS_INDEX)) {
        $needles_esc = array_map(
            function($needle) {return '('.$needle.')';},
            $needles_esc
        );
    }
    // Create the regular expression pattern to search for all needles.
    $pattern = '('.implode('|', $needles_esc).')';
    // If the "case insensitive" flag is set, then modify the regular
    // expression with "i", meaning that the match is "caseless".
    if ($flags & STRPOSM_CI) $pattern .= 'i';
    // Find the first match, including its offset.
    if (preg_match($pattern, $haystack, $matches, PREG_OFFSET_CAPTURE, $offset)) {
        // Pull the first entry, the overall match, out of the matches array.
        $found = array_shift($matches);
        // If we need the index of the matching needle, then...
        if (($flags & STRPOSM_NC) || ($flags & STRPOSM_MATCH_AS_INDEX)) {
            // ...find the index of the sub-match that is identical
            // to the overall match that we just pulled out.
            // Because sub-matches are in the same order as needles,
            // this is also the index into $needles of the matching
            // needle.
            $index = array_search($found, $matches);
        }
        // If the "match as index" flag is set, then return in $match
        // the matching needle's index, otherwise...
        $match = (($flags & STRPOSM_MATCH_AS_INDEX)
          ? $index
          // ...if the "needle case" flag is set, then index into
          // $needles using the previously-determined index to return
          // in $match the matching needle in needle case, otherwise...
          : (($flags & STRPOSM_NC)
             ? $needles[$index]
             // ...by default, return in $match the matching needle in
             // haystack case.
             : $found[0]
          )
        );
        // Return the captured offset.
        return $found[1];
    }

strposm_no_match:
    // Nothing matched. Set appropriate return values.
    $match = ($flags & STRPOSM_MATCH_AS_INDEX) ? false : null;
    return false;
}
?>

down

teddanzig at yahoo dot com ¶

15 years ago

routine to return -1 if there is no match for strpos



<?php

//instr function to mimic vb instr fucntion

function InStr($haystack, $needle)

{

    $pos=strpos($haystack, $needle);

    if ($pos !== false)

    {

        return $pos;

    }

    else

    {

        return -1;

    }

}

?>

down

usulaco at gmail dot com ¶

14 years ago

Parse strings between two others in to array.



<?php

function g($string,$start,$end){

     preg_match_all('/' . preg_quote($start, '/') . '(.*?)'. preg_quote($end, '/').'/i', $string, $m);

     $out = array();



     foreach($m[1] as $key => $value){

       $type = explode('::',$value);

       if(sizeof($type)>1){

          if(!is_array($out[$type[0]]))

             $out[$type[0]] = array();

          $out[$type[0]][] = $type[1];

       } else {

          $out[] = $value;

       }

     }

  return $out;

}

print_r(g('Sample text, [/text to extract/] Rest of sample text [/WEB::http://google.com/] bla bla bla. ','[/','/]'));

?>



results:

Array

(

    [0] => text to extract

    [WEB] => Array

        (

            [0] => http://google.com

        )



)



Can be helpfull to custom parsing :)

down

Jean ¶

5 years ago

When a value can be of "unknow" type, I find this conversion trick usefull and more readable than a formal casting (for php7.3+):

<?php
$time = time();
$string = 'This is a test: ' . $time;
echo (strpos($string, $time) !== false ? 'found' : 'not found');
echo (strpos($string, "$time") !== false ? 'found' : 'not found');
?>

down

bishop ¶

20 years ago

Code like this:
<?php
if (strpos('this is a test', 'is') !== false) {
    echo "found it";
}
?>

gets repetitive, is not very self-explanatory, and most people handle it incorrectly anyway. Make your life easier:

<?php
function str_contains($haystack, $needle, $ignoreCase = false) {
    if ($ignoreCase) {
        $haystack = strtolower($haystack);
        $needle   = strtolower($needle);
    }
    $needlePos = strpos($haystack, $needle);
    return ($needlePos === false ? false : ($needlePos+1));
}
?>

Then, you may do:
<?php
// simplest use
if (str_contains('this is a test', 'is')) {
    echo "Found it";
}

// when you need the position, as well whether it's present
$needlePos = str_contains('this is a test', 'is');
if ($needlePos) {
    echo 'Found it at position ' . ($needlePos-1);
}

// you may also ignore case
$needlePos = str_contains('this is a test', 'IS', true);
if ($needlePos) {
    echo 'Found it at position ' . ($needlePos-1);
}
?>

down

Achintya ¶

15 years ago

A function I made to find the first occurrence of a particular needle not enclosed in quotes(single or double). Works for simple nesting (no backslashed nesting allowed).



<?php

function strposq($haystack, $needle, $offset = 0){

    $len = strlen($haystack);

    $charlen = strlen($needle);

    $flag1 = false;

    $flag2 = false;

    for($i = $offset; $i < $len; $i++){

        if(substr($haystack, $i, 1) == "'"){

            $flag1 = !$flag1 && !$flag2 ? true : false;

        }

        if(substr($haystack, $i, 1) == '"'){

            $flag2 = !$flag1 && !$flag2 ? true : false;

        }

        if(substr($haystack, $i, $charlen) == $needle && !$flag1 && !$flag2){

            return $i;        

        }

    }

    return false;

}



echo strposq("he'llo'character;\"'som\"e;crap", ";"); //16

?>

down

-1

qrworld.net ¶

10 years ago

I found a function in this post http://softontherocks.blogspot.com/2014/11/buscar-multiples-textos-en-un-texto-con.html 
that implements the search in both ways, case sensitive or case insensitive, depending on an input parameter.

The function is:

function getMultiPos($haystack, $needles, $sensitive=true, $offset=0){
    foreach($needles as $needle) {
        $result[$needle] = ($sensitive) ? strpos($haystack, $needle, $offset) : stripos($haystack, $needle, $offset);
    }
    return $result;
}

It was very useful for me.

down

-3

Anonymous ¶

11 years ago

The most straightforward way to prevent this function from returning 0 is:

  strpos('x'.$haystack, $needle, 1)

The 'x' is simply a garbage character which is only there to move everything 1 position.
The number 1 is there to make sure that this 'x' is ignored in the search.
This way, if $haystack starts with $needle, then the function returns 1 (rather than 0).

down

-2

Tim ¶

16 years ago

If you would like to find all occurences of a needle inside a haystack you could use this function strposall($haystack,$needle);. It will return an array with all the strpos's.



<?php

/**

 * strposall

 * 

 * Find all occurrences of a needle in a haystack

 *

 * @param string $haystack

 * @param string $needle

 * @return array or false

 */

function strposall($haystack,$needle){

    

    $s=0;

    $i=0;

    

    while (is_integer($i)){

        

        $i = strpos($haystack,$needle,$s);

        

        if (is_integer($i)) { 

            $aStrPos[] = $i; 

            $s = $i+strlen($needle); 

        }

    }

    if (isset($aStrPos)) { 

        return $aStrPos; 

    } 

    else { 

        return false; 

    }

}

?>

down

-2

ah dot d at hotmail dot com ¶

15 years ago

A strpos modification to return an array of all the positions of a needle in the haystack 



<?php

function strallpos($haystack,$needle,$offset = 0){

    $result = array();

    for($i = $offset; $i<strlen($haystack); $i++){

        $pos = strpos($haystack,$needle,$i);

        if($pos !== FALSE){

            $offset =  $pos;

            if($offset >= $i){

                $i = $offset;

                $result[] = $offset;

            }

        }

    }

    return $result;

}

?>



example:-



<?php

$haystack = "ASD is trying to get out of the ASDs cube but the other ASDs told him that his behavior will destroy the ASDs world";



$needle = "ASD";



print_r(strallpos($haystack,$needle));



//getting all the positions starting from a specified position



print_r(strallpos($haystack,$needle,34));

?>

down

-2

Lhenry ¶

7 years ago

note that strpos( "8 june 1970"  ,  1970 ) returns FALSE.. 

add quotes to the needle

down

-3

spinicrus at gmail dot com ¶

18 years ago

if you want to get the position of a substring relative to a substring of your string, BUT in REVERSE way:

<?php

function strpos_reverse_way($string,$charToFind,$relativeChar) {
    //
    $relativePos = strpos($string,$relativeChar);
    $searchPos = $relativePos;
    $searchChar = '';
    //
    while ($searchChar != $charToFind) {
        $newPos = $searchPos-1;
        $searchChar = substr($string,$newPos,strlen($charToFind));
        $searchPos = $newPos;
    }
    //
    if (!empty($searchChar)) {
        //
        return $searchPos;
        return TRUE;
    }
    else {
        return FALSE;
    }
    //
}

?>

down

-2

sunmacet at gmail dot com ¶

4 years ago

To check that a substring is present.

Confusing check if position is not false:

if ( strpos ( $haystack , $needle ) !== FALSE )

Logical check if there is position:

if ( is_int ( strpos ( $haystack , $needle ) ) )

down

-3

gjh42 - simonokewode at hotmail dot com ¶

13 years ago

A pair of functions to replace every nth occurrence of a string with another string, starting at any position in the haystack. The first works on a string and the second works on a single-level array of strings, treating it as a single string for replacement purposes (any needles split over two array elements are ignored).

Can be used for formatting dynamically-generated HTML output without touching the original generator: e.g. add a newLine class tag to every third item in a floated list, starting with the fourth item.
 
<?php
/* String Replace at Intervals   by Glenn Herbert (gjh42)    2010-12-17
 */
 
//(basic locator by someone else - name unknown)
//strnposr() - Find the position of nth needle in haystack.
function strnposr($haystack, $needle, $occurrence, $pos = 0) {
    return ($occurrence<2)?strpos($haystack, $needle, $pos):strnposr($haystack,$needle,$occurrence-1,strpos($haystack, $needle, $pos) + 1);
}

//gjh42
//replace every nth occurrence of $needle with $repl, starting from any position
function str_replace_int($needle, $repl, $haystack, $interval, $first=1, $pos=0) {
  if ($pos >= strlen($haystack) or substr_count($haystack, $needle, $pos) < $first) return $haystack;
  $firstpos = strnposr($haystack, $needle, $first, $pos);
  $nl = strlen($needle);
  $qty = floor(substr_count($haystack, $needle, $firstpos + 1)/$interval);
  do { //in reverse order
    $nextpos = strnposr($haystack, $needle, ($qty * $interval) + 1, $firstpos); 
    $qty--;
    $haystack = substr_replace($haystack, $repl, $nextpos, $nl);
  } while ($nextpos > $firstpos);
  return $haystack;
}
  //$needle = string to find
  //$repl = string to replace needle
  //$haystack = string to do replacing in
  //$interval = number of needles in loop
  //$first=1 = first occurrence of needle to replace (defaults to first) 
  //$pos=0 = position in haystack string to start from (defaults to first) 
 
//replace every nth occurrence of $needle with $repl, starting from any position, in a single-level array
function arr_replace_int($needle, $repl, $arr, $interval, $first=1, $pos=0, $glue='|+|') {
  if (!is_array($arr))  return $arr;
  foreach($arr as $key=>$value){
    if (is_array($arr[$key])) return $arr;
  }
  $haystack = implode($glue, $arr);
  $haystack = str_replace_int($needle, $repl, $haystack, $interval, $first, $pos);
  $tarr = explode($glue, $haystack);
  $i = 0;
  foreach($arr as $key=>$value){
    $arr[$key] = $tarr[$i];
    $i++;
  }
  return $arr;
}
?>
If $arr is not an array, or a multilevel array, it is returned unchanged.

down

-2

gambajaja at yahoo dot com ¶

14 years ago

<?php
$my_array = array ('100,101', '200,201', '300,301');
$check_me_in = array ('100','200','300','400');
foreach ($check_me_in as $value_cmi){
    $is_in=FALSE; #asume that $check_me_in isn't in $my_array
    foreach ($my_array as $value_my){
        $pos = strpos($value_my, $value_cmi);
        if ($pos===0)
            $pos++;
        if ($pos==TRUE){
            $is_in=TRUE;
            $value_my2=$value_my;
            }
    }
    if ($is_in) echo "ID $value_cmi in \$check_me_in I found in value '$value_my2' \n";
}
?>

The above example will output
ID 100 in $check_me_in I found in value '100,101' 
ID 200 in $check_me_in I found in value '200,201' 
ID 300 in $check_me_in I found in value '300,301'

down

-2

yasindagli at gmail dot com ¶

15 years ago

This function finds postion of nth occurence of a letter starting from offset.

<?php
function nth_position($str, $letter, $n, $offset = 0){
    $str_arr = str_split($str);
    $letter_size = array_count_values(str_split(substr($str, $offset)));
    if( !isset($letter_size[$letter])){
        trigger_error('letter "' . $letter . '" does not exist in ' . $str . ' after ' . $offset . '. position', E_USER_WARNING);
        return false;
    } else if($letter_size[$letter] < $n) {
        trigger_error('letter "' . $letter . '" does not exist ' . $n .' times in ' . $str . ' after ' . $offset . '. position', E_USER_WARNING);
        return false;
    }
    for($i = $offset, $x = 0, $count = (count($str_arr) - $offset); $i < $count, $x != $n; $i++){
        if($str_arr[$i] == $letter){
            $x++;
        }
    }
    return $i - 1;
}

echo nth_position('foobarbaz', 'a', 2); //7
echo nth_position('foobarbaz', 'b', 1, 4); //6
?>

down

-3

ds at kala-it dot de ¶

4 years ago

Note this code example below in PHP 7.3
<?php
$str = "17,25";

if(FALSE !== strpos($str, 25)){
    echo "25 is inside of str";
} else {
    echo "25 is NOT inside of str";
}
?>

Will output "25 is NOT inside of str" and will throw out a deprication message, that non string needles will be interpreted as strings in the future.

This just gave me some headache since the value I am checking against comes from the database as an integer.

down

-3

philip ¶

20 years ago

Many people look for in_string which does not exist in PHP, so, here's the most efficient form of in_string() (that works in both PHP 4/5) that I can think of:

<?php

function in_string($needle, $haystack, $insensitive = false) {

    if ($insensitive) {

        return false !== stristr($haystack, $needle);

    } else {

        return false !== strpos($haystack, $needle);

    }

}

?>

down

-3

Lurvik ¶

10 years ago

Don't know if already posted this, but if I did this is an improvement.

This function will check if a string contains  a needle. It _will_ work with arrays and multidimensional arrays (I've tried with a > 16 dimensional array and had no problem).

<?php
function str_contains($haystack, $needles)
{
    //If needles is an array
    if(is_array($needles))
    {
        //go trough all the elements
        foreach($needles as $needle)
        {
            //if the needle is also an array (ie needles is a multidimensional array)
            if(is_array($needle))
            {
                //call this function again
                if(str_contains($haystack, $needle))
                {
                    //Will break out of loop and function.
                    return true;
                }
                
                return false;
            }

            //when the needle is NOT an array:
                //Check if haystack contains the needle, will ignore case and check for whole words only
            elseif(preg_match("/\b$needle\b/i", $haystack) !== 0)
            {
                return true;
            }
        }
    }
    //if $needles is not an array...
    else
    {
        if(preg_match("/\b$needles\b/i", $haystack) !== 0)
        {
            return true;
        }
    }

    return false;
}
?>

down

-3

amolocaleb at gmail dot com ¶

6 years ago

Note that strpos() is case sensitive,so when doing a case insensitive search,use stripos() instead..If the latter is not available,subject the string to strlower() first,otherwise you may end up in this situation..
<?php
//say we are matching url routes and calling access control middleware depending on the route

$registered_route = '/admin' ;
//now suppose we want to call the authorization middleware before accessing the admin route 
if(strpos($path->url(),$registered_route) === 0){
     $middleware->call('Auth','login');
}
?>
and the auth middleware is as follows
<?php
class Auth{

function login(){
   if(!loggedIn()){
       return redirect("path/to/login.php");
}
return true;
}
}

//Now suppose:
$user_url = '/admin';
//this will go to the Auth middleware for checks and redirect accordingly

//But:
$user_url = '/Admin';
//this will make the strpos function return false since the 'A' in admin is upper case and user will be taken directly to admin dashboard authentication and authorization notwithstanding
?>
Simple fixes:
<?php
//use stripos() as from php 5
if(stripos($path->url(),$registered_route) === 0){
     $middleware->call('Auth','login');
}
//for those with php 4
if(stripos(strtolower($path->url()),$registered_route) === 0){
     $middleware->call('Auth','login');
}
//make sure the $registered_route is also lowercase.Or JUST UPGRADE to PHP 5>

＋adicione uma nota