imagejpeg

(PHP 4, PHP 5, PHP 7, PHP 8)

imagejpeg — Вивід зображення в браузер чи файл.

Опис

imagejpeg(GdImage $image, resource|string|null $file = null, int $quality = -1): bool

imagejpeg() creates a JPEG file from the given image.

Параметри

image: Об'єкт GdImage, що повертається однією з функцій створення зображення, такою як imagecreatetruecolor().
file: Шлях або відкритий ресурс потоку (котрий автоматично закривається після повернення з цієї функції) для збереження файла. Якщо не встановлено або дорівнює null, буде виведено двійковий код зображення.
quality: quality is optional, and ranges from 0 (worst quality, smaller file) to 100 (best quality, biggest file). The default (-1) uses the default IJG quality value (about 75).

Значення, що повертаються

Повертає true у разі успіху або false в разі помилки.

Застереження

Проте, якщо libgd не може вивести зображення, ця функція повертає true.

Журнал змін

Версія	Опис
8.0.0	Тепер `image` має бути примірником GdImage. Раніше очікувався `gd`-resource.

Приклади

Приклад #1 Outputting a JPEG image to the browser

<?php
// Create a blank image and add some text
$im = imagecreatetruecolor(120, 20);
$text_color = imagecolorallocate($im, 233, 14, 91);
imagestring($im, 1, 5, 5,  'A Simple Text String', $text_color);

// Set the content type header - in this case image/jpeg
header('Content-Type: image/jpeg');

// Output the image
imagejpeg($im);

// Free up memory
imagedestroy($im);
?>

Поданий вище приклад виведе щось схоже на:

Приклад #2 Saving a JPEG image to a file

<?php
// Create a blank image and add some text
$im = imagecreatetruecolor(120, 20);
$text_color = imagecolorallocate($im, 233, 14, 91);
imagestring($im, 1, 5, 5,  'A Simple Text String', $text_color);

// Save the image as 'simpletext.jpg'
imagejpeg($im, 'simpletext.jpg');

// Free up memory
imagedestroy($im);
?>

Приклад #3 Outputting the image at 75% quality to the browser

<?php
// Create a blank image and add some text
$im = imagecreatetruecolor(120, 20);
$text_color = imagecolorallocate($im, 233, 14, 91);
imagestring($im, 1, 5, 5,  'A Simple Text String', $text_color);

// Set the content type header - in this case image/jpeg
header('Content-Type: image/jpeg');

// Skip the file parameter using NULL, then set the quality to 75%
imagejpeg($im, NULL, 75);

// Free up memory
imagedestroy($im);
?>

Примітки

Зауваження:
If you want to output Progressive JPEGs, you need to set interlacing on with imageinterlace().

Прогляньте також

imagepng() - Output a PNG image to either the browser or a file
imagegif() - Вивід зображення в браузер чи файл.
imagewbmp() - Вивід зображення в браузер чи файл.
imageinterlace() - Enable or disable interlace
imagetypes() - Return the image types supported by this PHP build

Improve This Page

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 34 notes

down

Ray.Paseur sometimes uses Gmail ¶

14 years ago

If string $filename is given and it exists, it will be overwritten.

down

francesco@essensys ¶

15 years ago

I didn't find any example like this on the Web, so I mixed pieces together.. hope this will save time to other people!

Here's a complete solution to READ any image (gif jpg png) from the FILESYSTEM, SCALE it to a max width/height, SAVE the scaled image to a BLOB field keeping the original image type. Quite tricky.. 

<?php

function scaleImageFileToBlob($file) {

    $source_pic = $file;
    $max_width = 200;
    $max_height = 200;

    list($width, $height, $image_type) = getimagesize($file);

    switch ($image_type)
    {
        case 1: $src = imagecreatefromgif($file); break;
        case 2: $src = imagecreatefromjpeg($file);  break;
        case 3: $src = imagecreatefrompng($file); break;
        default: return '';  break;
    }

    $x_ratio = $max_width / $width;
    $y_ratio = $max_height / $height;

    if( ($width <= $max_width) && ($height <= $max_height) ){
        $tn_width = $width;
        $tn_height = $height;
        }elseif (($x_ratio * $height) < $max_height){
            $tn_height = ceil($x_ratio * $height);
            $tn_width = $max_width;
        }else{
            $tn_width = ceil($y_ratio * $width);
            $tn_height = $max_height;
    }

    $tmp = imagecreatetruecolor($tn_width,$tn_height);

    /* Check if this image is PNG or GIF, then set if Transparent*/
    if(($image_type == 1) OR ($image_type==3))
    {
        imagealphablending($tmp, false);
        imagesavealpha($tmp,true);
        $transparent = imagecolorallocatealpha($tmp, 255, 255, 255, 127);
        imagefilledrectangle($tmp, 0, 0, $tn_width, $tn_height, $transparent);
    }
    imagecopyresampled($tmp,$src,0,0,0,0,$tn_width, $tn_height,$width,$height);

    /*
     * imageXXX() only has two options, save as a file, or send to the browser.
     * It does not provide you the oppurtunity to manipulate the final GIF/JPG/PNG file stream
     * So I start the output buffering, use imageXXX() to output the data stream to the browser, 
     * get the contents of the stream, and use clean to silently discard the buffered contents.
     */
    ob_start();

    switch ($image_type)
    {
        case 1: imagegif($tmp); break;
        case 2: imagejpeg($tmp, NULL, 100);  break; // best quality
        case 3: imagepng($tmp, NULL, 0); break; // no compression
        default: echo ''; break;
    }

    $final_image = ob_get_contents();

    ob_end_clean();

    return $final_image;
}

?>

So, let's suppose you have a form where a user can upload an image, and you have to scale it and save it into your database.

<?php
    
    [..] // the user has clicked the Submit button..
    
    // Check if the user entered an image
    if ($_FILES['imagefile']['name'] != '') {
        $image = scaleImageFileToBlob($_FILES['imagefile']['tmp_name']);

        if ($image == '') {
            echo 'Image type not supported';
        } else {
            $image_type = $_FILES['imagefile']['type'];
            $image = addslashes($image);
            
            $query  = "UPDATE yourtable SET image_type='$image_type', image='$image' WHERE ...";
            $result = mysql_query($query);
            if ($result) {
               echo 'Image scaled and uploaded';
             } else {
               echo 'Error running the query';
             }
        }
    }

?>

down

Bruno de Lima - bruno at tthedreamstone dot net ¶

11 years ago

[[Editor's note: removed the header()-call since it is not required when outputting inline image-data]]

One single code line, solve-me after 3 hours of blind search!



here is:



... ob_start();

  imagejpeg( $img, NULL, 100 );

  imagedestroy( $img );

  $i = ob_get_clean();



echo "<img src='data:image/jpeg;base64," . base64_encode( $i )."'>"; //saviour line!

down

Uplink ¶

1 year ago

If you use the official Docker images and enable gd with `docker-php-ext-install gd`, you don't get JPEG support by default.

If that's you, and you get "Call to undefined function imagejpeg()", the you need to do this before docker-php-ext-install:

docker-php-ext-configure gd --with-jpeg

You'll also want to install libjpeg-dev for this to work.

down

your [dot] sheepy [at] gmail [dot] com ¶

18 years ago

Regarding Carl Gieringer's comment, it is possible to have PHP files in utf-8.  Just make sure the editor does not output BOM, which is unnecessary in utf-8 anyway.

Except for any editors from Microsoft, most programmer's editors that supports utf allows you to surpress BOM.

down

stefan at colulus dot com ¶

16 years ago

I worked out a script that allows the transfer of alphanumeric data to be placed on an image. The HTML feature is img src and the php feature is imagettftext. This simple code will increment from 1 to 3 on images.

code:

<?php
//ImageCall.php -- This script will call a script to produce the image.
for($next = 1;$next < 4; $next++){
print "Image $next:<br>";
print "<img src = 'Image.php?\$text=$next'>";
print "<br><br>";
}
?>

<?php
//Image.php -- This script creates a square image and places the text on it.

// image size and color
$im = ImageCreate(77,77);
$color1 = ImageColorAllocate($im,0x66,0xCC,0x00);
$color2 = ImageColorAllocate($im,0x33,0x66,0x00);
$color3 = ImageColorAllocate($im,0x00,0x99,0x00);
$color4 = ImageColorAllocate($im,0x3D,0x3D,0x3D);

// image creation
ImageFilledRectangle($im,1,1,76,76,$color1);
ImageFilledpolygon($im, array (76,1,1,76,76,76),3,$color2);
ImageFilledRectangle($im,5,5,72,72,$color3);

// determine numeric center of image
$size = ImageTTFBBox(45,0,'impact',$_GET['$text']);
$X = (77 - (abs($size[2]- $size[0])))/2;
$Y = ((77 - (abs($size[5] - $size[3])))/2 + (abs($size[5] - $size[3])));

//places numeric information on image
ImageTTFText($im,45,0,($X-1),$Y,$color4,'impact',$_GET['$text']);

//returns completed image to calling script
Header('Content-Type: image/png');
Imagejpeg($im);

?>

down

Bram Van Dam ¶

19 years ago

If you wish to capture the jpg data into a variable, rather than outputting it or saving it into a file (perhaps so you can put it in a database), you might want to consider output buffering. Something along these lines should work:

<?php
ob_start(); // start a new output buffer
    imagejpeg( $newimage, NULL, 100 );
    $ImageData = ob_get_contents();
ob_end_clean; // stop this output buffer
?>

down

viciousVelo ¶

15 years ago

for those who get the message "permission denied" or "unable to access": it looks like a problem with your writepermissions to this folder. no matter if you use windows- or linuxserver, be sure the correct user has the permission to write to the correct folder.

down

Darren Kulp ( kulp at thekulp dot com ) ¶

18 years ago

With regard to chris.calo's code:

// The following block retrieves the source file.  It assumes the filename extensions match the file's format.
   if ( strpos($source_file,".gif") ) { $img_source = imagecreatefromgif($source_file); }
   if ( (strpos($source_file,".jpg")) || (strpos($source_file,".jpeg")) )
 ... etc.

It assumes more than that, namely that the filename does not contain the strings '.gif', '.jpg', '.jpeg', '.bmp', or '.png' *anywhere* in the string. Some valid files with special filenames could break this; for example, a file named "used.to.be.a.png.file.gif" would cause this script to attempt to load the file as a PNG. Obviously this is a rare case, but the issue could be easily avoided by using "else ifs" (uses less CPU time) or checking that the extension abuts the end of the string or both.

That said, the whole business could be avoided if PHP didn't clutter the namespace with different functions to do the same thing with different image formats. Ick.

down

Elliott Brueggeman ¶

17 years ago

I did an experiment with the image quality parameter of the imagejpeg() function when creating jpegs. I found the optimal image quality with file size is taken into account to be 80 - very close to the default value of 75.

Anything over 80 results in an unnecessary increase in file size without much increase in image quality.

Results and sample pictures: http://www.ebrueggeman.com/article_php_image_optimization.php

down

dklein at gmx dot de ¶

22 years ago

Looks like any specified resolution settings in a JPEG file get lost when using imageJPEG() function in a script.

I had a high resolution JPEG which i added text to with imagestringup() so my customer can print the emailed JPEG as a filled form, but printing both Graphics from Photoshop revealed that any JPEG created is downsampled to 72 dpi, while width and height is kept.

(72 dpi is the standard web resolution)

Nothing to wonder about, but maybe if you read this you dont need to scratch your head :)

down

flying man ¶

5 years ago

ZERO BYTE FILE RESULT - HERE'S WHY!

Take to heart that CAUTION note on this function. If gdlib fails to output, it still returns true!  I'd call that a bug personally.

GD will fail to output if you have an image exceeding its maximum undisclosed dimensions of 65500 pixels.

You'll get a zero byte file instead

down

tomas at dundacek dot cz ¶

15 years ago

I had a problem with denied permissions when trying to upload AND resize an image having safe_mode on. This caused that I couldn't create the new file in which I wanted to resampled the image with nor with imagejpeg() nor with touch() and imagejpeg() after it. 

Here is my solution, I didn't test, but it's possible, it is biting some memory:

<?php
function resize($image, $target_file) {
  // $image is the uploaded image
  list($width, $height) = getimagesize($image['tmp_name']);

  //setup the new size of the image
  $ratio = $width/$height;
  $new_height = 500;
  $new_width = $new_height * $ratio;

  //move the file in the new location
  move_uploaded_file($image['tmp_name'], $target_file);
  
  // resample the image        
  $new_image = imagecreatetruecolor($new_width, $new_height);
  $old_image = imagecreatefromjpeg($target_file);
  imagecopyresampled($new_image,$old_image,0,0,0,0,$new_width, $new_height, $width, $height);        

  //output
  imagejpeg($new_image, $target_file, 100);
}

?>

As you can see, the function moves the uploaded file where you want to save the resampled image (move_uploaded_file is not restricted by safe_mode) and then you can resample the image, because it was created by moving it already. 

Note: the directory where you want to save the file must have permissions set to 0777.

down

soapergem at gmail dot com ¶

16 years ago

I came here looking for something similar to the getJPEGresolution function, but noticed the drawbacks that were pointed out in the last post. So, after drawing on some other code examples on the web, I put together the following function which should always properly return the correct values. (But remember that you still need to have the EXIF extension installed with your instance of PHP for this to work!)

<?php

function jpeg_dpi($filename)
{
    if ( exif_imagetype($filename) != IMAGETYPE_JPEG ) {
        return false;
    } else {
        $exif = exif_read_data($filename, 'IFD0');
    }
    
    $x = $y = 0;
    if ( isset($exif['XResolution']) && isset($exif['YResolution']) ) {
        $x = intval(preg_replace('@^(\\d+)/(\\d+)$@e', '$1/$2', $exif['XResolution']));
        $y = intval(preg_replace('@^(\\d+)/(\\d+)$@e', '$1/$2', $exif['YResolution']));
    }
    
    if ( !$x && !$y && $fp = fopen($filename, 'r') ) {
        $string = fread($fp, 20);
        fclose($fp);
        
        $data = bin2hex(substr($string, 14, 4));
        $x = hexdec(substr($data, 0, 4));
        $y = hexdec(substr($data, 4, 4));
    }
    
    if ( $x || $y ) {
        return array($x, $y);
    }
    
    return false;
}

?>

This function returns an array with the x-resolution, y-resolution when they can be determined, otherwise FALSE.

down

ahows at noggin dot com dot au ¶

16 years ago

Regarding the code below, it only grabs the last byte of the DPI information in JFIF-mode. I was wondering why my 300-DPI file was being reported as 44. 300 - 256 = 44 of course.

down

lorezyra (at) lorezyra (dot) com ¶

16 years ago

For those looking to grab the resolution of a JPEG image without using GD nor ImageMagic... I wrote this simple function.

Too bad GD doesn't have this very simple function for us to use...

<?php
function getJPEGresolution($filename){
    $outRez=array();
    // Read the file
    ob_start(); // start a new output buffer
    $image   = file_get_contents($filename);
    
    // grab DPI information from the JPG header
    $outRez["xDPI"] = ord($image[15]);
    $outRez["yDPI"] = ord($image[17]);
    ob_end_clean(); // stop this output buffer

    //xDPI and yDPI should equal in value... but we output both anyway...
    return($outRez);
}//end function getJPEGresolution
?>

down

Anonymous ¶

16 years ago

Here is a function to resize an image and maintain aspect ratio. It will resize jpeg, gif or png and could easily be modified to add bmp. The name field is the destination of the file minus the file extension:

<?php
//name= filename minus type
    function createImage($uploadedfile,$newWidth,$name) 
    {
        // Capture the original size of the uploaded image
        if(!$info=getimagesize($uploadedfile))
          return false;
        
        switch ($info['mime']) 
        {
            case 'image/jpeg':
                $src = imagecreatefromjpeg($uploadedfile);
                break;
            case 'image/gif':
                $src = imagecreatefromgif($uploadedfile);
                break;
            case 'image/png':
                $src = imagecreatefrompng($uploadedfile);
                break;
            default:
                return false;
        }
        
        //Change the filename to add the filetype
        $mime=split("image/",$info['mime']);
        $filename=$name.".".$mime[1];
        
        $size = getimagesize($uploadedfile);
        $newHeight=aspect_ratio($size[0],$newWidth,$size[1]);
        
        $tmp=imagecreatetruecolor($newWidth,$newHeight);
        
        // this line actually does the image resizing, copying from the original
        // image into the $tmp image
        imagecopyresampled($tmp,$src,0,0,0,0,$newWidth,$newHeight,$info[0], $info[1]);
        
        switch ($info['mime'])
        {
            case 'image/jpeg':
                imagejpeg($tmp,$filename,100); //100 is the quality settings, values range from 0-100.
                break;
            case 'image/gif':
                imagegif($tmp,$filename,100); //100 is the quality settings, values range from 0-100.
                break;
            case 'image/png':
                imagepng($tmp,$filename); //100 is the quality settings, values range from 0-100.
                break;
        }
            
        imagedestroy($src);
        imagedestroy($tmp); // NOTE: PHP will clean up the temp file it created when the request
        // has completed.
        return true;
    }

    if(!createImage($uploadedfile,100, "uploaded_images/imgname"))
    {
      echo "error";
    }
?>

down

webmaster at jongliertreff dot de ¶

18 years ago

Here's another on-the-fly thumbnail creation script.

When I scripted the pictuerviewer on my page, I had all the pictures only in full size and qualit, because I wanted the posibility für visitors to download the pictures.

But as Imagesizes of more than 4 MP are to large for websites, I created thumbnails and the smaller pictures on the fly. But I found out, that the Script needed too much RAM, especially in the thumbnail overview, when I had more then 50 thumbnails to create on the fly at the same time.



So I modified my image creator and my viewer to let them store images, that are created. So only the first visitor has to wait (which is usually me for controlling the uploads und updates), all other visitors get the stored images, which is much faster.



Create different folders. I have a main folder called 'imagesdb' and the tree subfolders full (Full quality images), show (images for the picture viewer) and thumb (for thumbnails in overview).



Store the script for example as image.php and link it like that:



<?PHP

$image_name = "foo.jpg";

$style = "show";

     // I've taken the foldernames. It's easier. For the 

     //thumbnails replace "show" with "thumb".

$image_name = "imagesdb/$style/$image_name";

if(!file_exists($image_name))

        $image_name = "image.php?image_name=$image_name&style=$style";

     // only if file doesn't exist call the on-the-fly creating file

?>



Now the main script, stored in the file image.php:



<?PHP



$image_name = $_GET['image_name'];

$style = $_GET['style'];



     // Now set the maximum sizes to the different styles.

     // You may set additional styles, but remember to

     // create the according subfolders.



switch($style) {

  case "show":

    $max_size = 800;

    break;

  case "thumb":

    $max_size = 125;

}



$dest_file = "imagesdb/$style/$image_name";

     // set output file

$image_file = "imagesdb/full/$image_name";

     // set source file

$size = getimagesize($image_file);

     // get original size



if($size[0] > $size[1]) {

  $divisor = $size[0] / $max_size;

}

else {

  $divisor = $size[1] / $max_size;

}

     // to get allways pictures of the same size, which ist

     // mostly wanted in imageviewers, look what ist larger:

     // width or height



$new_width = $size[0] / $divisor;

$new_height = $size[1] / $divisor;

     // set new sizes



settype($new_width, 'integer');

settype($new_height, 'integer');

     // sizes should be integers



$image_big = imagecreatefromjpeg($image_file);

     // load original image

$image_small = imagecreatetruecolor($new_width, $new_height);

     // create new image

imagecopyresampled($image_small, $image_big, 0,0, 0,0, $new_width,$new_height, $size[0],$size[1]);

     // imageresampled whill result in a much higher quality

     // than imageresized

imagedestroy($image_big);

     // the original data are no longer used



header("Content-type: image/jpeg");



if($style=="show" || $style=="thumb") {

  if(!file_exists($dest_file))

    imagejpeg($image_small, $dest_file, 100);

}

     // if you have set additional sizese put them in the

     // if-arguments, too.

     // if someone calls the image.php directly in the

     // browser with imagenames allready existing, they

     // won't be overwritten



imagejpeg($image_small, '', 100);

imagedestroy($image_small);

     // finally send image to browser and destroy no longer

     // needed data.



?>



As this website helped me for several times in the past and for creating this script, I hope I can help others with this script saving the time for developing a much more performant solution than an allways-on-the-fly-creating script.

down

stuart at purpletoucan dot com ¶

18 years ago

Thanks to Chris dot Calo for the thumbnail snippet.  The file type issue is easily resolved by getting the type from the file with getimagesize, and you can handle unsupported types at that stage too.  Thus:

   list($img_width,$img_height, $type) = getimagesize($source_file); // Get the original dimentions
   if ($type != 1 && $type != 2 && $type != 3 && $type != 15) { die("Your file is not a supported format"); }

...and then later check the type again to open the image correctly:

   if ( $type == 1 ) { $img_source = imagecreatefromgif($source_file); }
   else if ( $type == 2 ) { $img_source = imagecreatefromjpeg($source_file); }
   else if ( $type == 3 ) { $img_source = imagecreatefrompng($source_file); }
   else if ( $type == 15 ) { $img_source = imagecreatefromwbmp($source_file); }

down

Anonymous ¶

18 years ago

Hi

I had similar problem with safe mode. My solution is:

before imagejpeg(), touch() etc.
write:
ini_set(safe_mode,Off);
and after everything:
ini_set(safe_mode,On);

strange, but it works 
Chears2All

down

moron at industrial dot org ¶

19 years ago

Please note that there is a bug report open for the currently broken safe_mode behaviour on this function:

http://bugs.php.net/?id=35060

According to the PHP staffer who has responded the docs are wrong (I don't agree but I'm also not their employee).  

The work around is to use touch() (or any other file system function that can do this) to create the file first before using imagejpeg().

down

mbailey [at] aethon [dt] co [dt] uk ¶

19 years ago

>>Bram Van Dam's

note below is missing "()" from the ob_end_clean call:

ob_end_clean; // stop this output buffer

should read

ob_end_clean(); // stop this output buffer

You can then use this for adding content-length headers (for example flash requires a content length in advance to create loaders)

e.g.

...

ob_start(); // start a new output buffer
   imagejpeg( $newimage, "", 90 );
   $ImageData = ob_get_contents();
   $ImageDataLength = ob_get_length();
ob_end_clean(); // stop this output buffer

header("Content-type: image/jpeg") ;
header("Content-Length: ".$ImageDataLength);
echo $ImageData;

...

down

Anonymous ¶

20 years ago

A word of warning when outputting images to the browser...

Make sure there is no extra spaces around the <?php ?> tags, in the file you are editing, and also any included files.

I began to think there was a bug in GD or something, and I checked the file I was working on, but forgot about the includes...

Hours gone..

down

-2

ghokanso at cs dot ndsu dot edu ¶

19 years ago

When displaying an image using imagepng or imagejpeg, you may want/need to call "header("Content-type: image/jpeg")" before the imagepng and imagejpeg functions.
It appears that some servers/browers are striping out the default header so the image is not rendered and appears as raw data.
(Firefox 1.02+ and OSX Safari for example)

down

-1

irishcybernerd at email dot com ¶

21 years ago

Rather than using the temporary file, as described above, you can buffer the output stream. Someone else showed me this, and it seems to work very nicely.

    //Start buffering the output stream
    ob_start();

    // output the image as a file to the output stream
    Imagejpeg($im);
    
    //Read the output buffer
    $buffer = ob_get_contents();

    //clear the buffer
    ob_end_clean();

    //use $buffer as you wish...

down

-1

Michaelsoft ¶

17 years ago

[Editor's note: fixed according to the note of roberto at ilpiola.it]



I could not find any information on changing the DPI information on a JPG file using the GD lib. Since changing this does not resize or scale the actual image, it is only a header-setting.

The following snipplet will save your $image to $file and set the DPI to 150.



<?php



  imagejpeg($image, $file, 75);



  // Change DPI

  $dpi_x   = 150;

  $dpi_y   = 150;

  

  // Read the file

  $size    = filesize($file);

  $image   = file_get_contents($file);



  // Update DPI information in the JPG header

  $image[13] = chr(1);

  $image[14] = chr(floor($dpi_x/256));

  $image[15] = chr(      $dpi_x%256);

  $image[16] = chr(floor($dpi_y/256));

  $image[17] = chr(      $dpi_y%256);



  // Write the new JPG

  $f = fopen($file, 'w');

  fwrite($f, $msg, $size);

  fclose($f);



?>



P.s. not fully tested (yet) but it works for my images ...

down

-1

Kokesh ¶

20 years ago

Here is the simple, but powerful script for creating thumbnails on the fly. 
You can include the script 
directly to www page - just put it in <img src= tag. 
with width 150pix. 
This resizer respects the ASPECT RATIO.
Here is the script:
<?php
// Use it this way: resize.php?pic=imageurl&width=width_in_pixels
// kokesh@kokeshnet.com 2004
    header("Content-type: image/jpeg");
    $im     = imagecreatefromjpeg($pic);
    $orange = imagecolorallocate($im, 220, 210, 60);
    $px     = (imagesx($im) - 7.5 * strlen($string)) / 2;

    $old_x=imageSX($im);
    $old_y=imageSY($im);

    $new_w=(int)($width);
    if (($new_w<=0) or ($new_w>$old_x)) {
      $new_w=$old_x;
    }

    $new_h=($old_x*($new_w/$old_x));

    if ($old_x > $old_y) {
        $thumb_w=$new_w;
        $thumb_h=$old_y*($new_h/$old_x);

    }
    if ($old_x < $old_y) {
        $thumb_w=$old_x*($new_w/$old_y);
        $thumb_h=$new_h;
    }
    if ($old_x == $old_y) {
        $thumb_w=$new_w;
        $thumb_h=$new_h;
    }
     $thumb=ImageCreateTrueColor($thumb_w,$thumb_h);
     imagecopyresized($thumb,$im,0,0,0,0,$thumb_w,$thumb_h,$old_x,$old_y);

    imagejpeg($thumb,"",90);
    imagedestroy($thumb);
?>

down

-1

gzink at zinkconsulting dot com ¶

20 years ago

Don't forget that JPEG compression has artifacts! And they're not all really obvious. The PHP JPEG compression is pretty decent, but it seems to generally:

-Lighten the image overall, by a reasonable amount (never seen this before, but it will drive graphic designers crazy, you might want to darken the image before compressing it)
-Reduce saturation, especially with images with lots of points of different color within a few pixels of each other (this is a documented feature of JPEG)
-Seriously mess with blue colors, which is common to all JPEG but really annoying in some situations with blue and black or other detailed blue parts

You might want to consider using imagepng() and outputting a PNG image instead of a JPEG if any of the above affect you, or your image is not very photo-like. Sometimes I have an algorithm compare JPEG to PNG for an image and send the smaller version to the user. 

Also, when using imagepng(), you should use imageinterlace() before it 95% of the time. Interlaced JPEGs load progressively, improving in quality as the image loads, so users on slower connections see the whole image at low quality. All this happens without affecting the file size (actually, sometimes the file size is smaller!) or final quality.

Hope this helps a few people out. It's not all that obvious without lots of playing around.

-Galen
http://zinkconsulting.com/

down

-2

bernytech at gmail dot com ¶

13 years ago

Don't be like me racking my brain for hours trying to figure out why my xxx.php file outputs http://localhost/xxx.php as a one line response.

Why?

Most likely, you have either:

1. whitespaces before or after the php tags
2. need to set header('Content-type: image/jpeg');
3. if you have required files...be sure nothing is outputted...no test print statements because page expects image information
4.  there is an error in your code

in my case, it was 4.  there is a reason why the function call base64decode does not work... 

it's actually: base64_decode()

by the way, other ways to validate your image encoded in base64 is to use the following tag:

echo '<img src="data:image/jpeg;base64,'.$row['IMAGE'].'" alt="photo">';

I was pulling a blob encoded base 64 data from mysql database and trying to render it on a page

hope this helps someone.

down

-1

chris dot calo at gmail dot com ¶

18 years ago

Thanks to Stuart and Darren for the corrections to the create_thumbnail function.  Another note on that function: imagecreatefromwbmp was incorrectly used.  WBMPs are wireless bitmaps, not windows bitmaps (thanks to clambert at whitecrown), so the thumbnail routine as is will not be able to handle windows bitmaps.  See the notes at http://us2.php.net/manual/en/function.imagecreatefromwbmp.php for tips on working with windows bitmaps.

down

-1

Kenneth Keiter ¶

18 years ago

So.. after messing around with this beast of a function for hours, I discovered that it DOES NOT preserve the resource it is using the create the image, nor do imagepng() or imagegif(). By this I mean that you can not run two imagejpeg(), imagepng() or imagegif() calls on the same resource. Another possibly undocumented quirk... :-(

down

-1

wojteksw at go2 dot pl ¶

19 years ago

I have changed one line in the script of Kokesh
25-Jun-2004 06:42 listed above, and now it generates better quality thumbnails. 
You have to change function imagecopyresized() to imagecopyresampled()

down

-2

John Luetke <johnl1479 gmail com> ¶

19 years ago

Rewrote the manual example into this function for creating a thumbnail image:

function thumbnail_jpeg ($original, $thumbnail, $width, $height, $quality) {
  list($width_orig, $height_orig) = getimagesize($original);
  if ($width && ($width_orig < $height_orig)) {
    $width = ($height / $height_orig) * $width_orig;
  }
        else {
    $height = ($width / $width_orig) * $height_orig;
  }
  $image_p = imagecreatetruecolor($width, $height);
  $image = imagecreatefromjpeg($originial);
  imagecopyresampled($image_p, $image, 0, 0, 0, 0, $width, $height, $width_orig, $height_orig);
  imagejpeg($image_p, $thumbnail, $quality);
  return;
}

down

-2

Pedja (pedja at supurovic dot net) ¶

17 years ago

Here is sample function that creates thumbnail of source JPEG file. Thumbnail wil be in square form (with and height are the same), and original image cropped to fit in.

Parameters:

$p_thumb_file - name of the file (including path) where thumb should be saved to

$p_photo_file - nam of the source JPEG file (including path) thatthumbnail should be created of

$p_max_size - with and height (they will be the same) in pixels for thumbnail image

$p_quality - quality of jpeg thumbnail

<?php

function photoCreateCropThumb ($p_thumb_file, $p_photo_file, $p_max_size, $p_quality = 75) {
  
    $pic = @imagecreatefromjpeg($p_photo_file);

    if ($pic) {
        $thumb = @imagecreatetruecolor ($p_max_size, $p_max_size) or die ("Can't create Image!");
        $width = imagesx($pic);
        $height = imagesy($pic);
        if ($width < $height) {
                $twidth = $p_max_size;
                $theight = $twidth * $height / $width; 
                imagecopyresized($thumb, $pic, 0, 0, 0, ($height/2)-($width/2), $twidth, $theight, $width, $height); 
        } else {
                $theight = $p_max_size;
                $twidth = $theight * $width / $height; 
                imagecopyresized($thumb, $pic, 0, 0, ($width/2)-($height/2), 0, $twidth, $theight, $width, $height); 
        }

        ImageJPEG ($thumb, $p_thumb_file, $p_quality);
    }

}

?>

＋add a note