imagefilledpolygon

(PHP 4, PHP 5, PHP 7, PHP 8)

imagefilledpolygon — Desenha um polígono preenchido

Descrição

Assinatura a partir do PHP 8.0.0 (sem suporte a argumentos com nome)

imagefilledpolygon(GdImage $image, array $points, int $color): bool

Assinatura alternativa (descontinuada a partir do PHP 8.1.0)

imagefilledpolygon(
    GdImage $image,
    array $points,
    int $num_points,
    int $color
): bool

imagefilledpolygon() cria um polígono preenchido na imagem fornecida em image.

Parâmetros

image: Um objeto GdImage, retornado por uma das funções de criação de imagem, como imagecreatetruecolor().
points: Um array contendo as coordenadas x e y dos vértices consecutivos do polígono.
num_points: Número total de pontos (vértices), que devem ser pelo menos 3.
Se este parâmetro for omitido na segunda assinatura, points deve ter um número par de elementos, e num_points será assumido como count($points)/2.
color: Um identificador de cor criado com imagecolorallocate().

Valor Retornado

Retorna true em caso de sucesso ou false em caso de falha.

Registro de Alterações

Versão	Descrição
8.1.0	O parâmetro `num_points` foi descontinuado.
8.0.0	O parâmetro `image` agora espera uma instância de GdImage; anteriormente, um resource `gd` válido era esperado.

Exemplos

Exemplo #1 Exemplo de imagefilledpolygon()

<?php
// configura o array de pontos para o polígono
$values = array(
            40,  50,  // Ponto 1 (x, y)
            20,  240, // Ponto 2 (x, y)
            60,  60,  // Ponto 3 (x, y)
            240, 20,  // Ponto 4 (x, y)
            50,  40,  // Ponto 5 (x, y)
            10,  10   // Ponto 6 (x, y)
            );

// cria imagem
$image = imagecreatetruecolor(250, 250);

// aloca cores
$bg   = imagecolorallocate($image, 0, 0, 0);
$blue = imagecolorallocate($image, 0, 0, 255);

// preenche o fundo
imagefilledrectangle($image, 0, 0, 249, 249, $bg);

// desenha um polígono
imagefilledpolygon($image, $values, 6, $blue);

// descarrega a imagem
header('Content-type: image/png');
imagepng($image);
imagedestroy($image);
?>

O exemplo acima produzirá algo semelhante a:

Veja Também

imagepolygon() - Desenha um polígono

Melhore Esta Página

Aprenda Como Melhorar Esta Página • Envie uma Solicitação de Modificação • Reporte um Problema

＋adicione uma nota

Notas Enviadas por Usuários (em inglês) 9 notes

down

tatlar at yahoo dot com ¶

18 years ago

<?php function _makeFiveSidedStar( $x, $y, $radius, $shape='polygon', $spiky=NULL ) {
    // $x, $y co-ords of origin (in pixels), $radius (in pixels), $shape - 'polygon' or 'star', $spikiness - ratio between 0 and 1
    $point = array() ;                                                                                                                    
    $angle = 360 / 5 ;                                                                                                                    
    $point[0]['x'] = $x ;                                                                                                                 
    $point[0]['y'] = $y - $radius ;                                                                                                       
    $point[2]['x'] = $x + ( $radius * cos( deg2rad( 90 - $angle ) ) ) ; 
    $point[2]['y'] = $y - ( $radius * sin( deg2rad( 90 - $angle ) ) ) ;
    $point[4]['x'] = $x + ( $radius * sin( deg2rad( 180 - ( $angle*2 ) ) ) ) ;
    $point[4]['y'] = $y + ( $radius * cos( deg2rad( 180 - ( $angle*2 ) ) ) ) ;
    $point[6]['x'] = $x - ( $radius * sin( deg2rad( 180 - ( $angle*2 ) ) ) ) ;                                                            
    $point[6]['y'] = $y + ( $radius * cos( deg2rad( 180 - ( $angle*2 ) ) ) ) ;
    $point[8]['x'] = $x - ( $radius * cos( deg2rad( 90 - $angle ) ) ) ;                                                                   
    $point[8]['y'] = $y - ( $radius * sin( deg2rad( 90 - $angle ) ) ) ;
    if( $shape == 'star' ) {
        if( $spiky == NULL ) $spiky = 0.5 ;  // default to 0.5
        $indent = $radius * $spiky ;
        $point[1]['x'] = $x + ( $indent * cos( deg2rad( 90 - $angle/2 ) ) ) ;                                                             
        $point[1]['y'] = $y - ( $indent * sin( deg2rad( 90 - $angle/2 ) ) ) ;                                                     
        $point[3]['x'] = $x + ( $indent * sin( deg2rad( 180 - $angle ) ) ) ;                                                              
        $point[3]['y'] = $y - ( $indent * cos( deg2rad( 180 - $angle ) ) ) ;
        $point[5]['x'] = $x ;                                                                                                             
        $point[5]['y'] = $y + ( $indent * sin( deg2rad( 180 - $angle ) ) ) ;
        $point[7]['x'] = $x - ( $indent * sin( deg2rad( 180 - $angle ) ) ) ;                                                              
        $point[7]['y'] = $y - ( $indent * cos( deg2rad( 180 - $angle ) ) ) ;                                                              
        $point[9]['x'] = $x - ( $indent * cos( deg2rad( 90 - $angle/2 ) ) ) ;                                                             
        $point[9]['y'] = $y - ( $indent * sin( deg2rad( 90 - $angle/2 ) ) ) ;
    }
    ksort( $point ) ;
    $coords = array() ;  // new array                                                                                                                 
    foreach( $point as $pKey=>$pVal ) {                                                                                                   
        if( is_array( $pVal ) ) {                                                                                                         
            foreach( $pVal as $pSubKey=>$pSubVal ) {                                                                                      
                if( !empty( $pSubVal ) ) array_push( $coords, $pSubVal ) ;                                                                
            }                                                                                                                             
        }                                                                                                                                 
    }
    return $coords ;
}
$values = _makeFiveSidedStar( 100, 100, 50, 'star' ) ;
// Put values into imagepolygon function. You need to define the $image and $color, and flush it out to an image type.?>

down

jylyn at hotmail dot com ¶

18 years ago

In spite of what it says about requiring more than 3 vertices, it is possible to draw a triangle with this function!

down

martin at eksperimentrum dot dk ¶

6 years ago

How to draw a simple 6-sided star img where x,y is center of the star and s is the size:

function drawStar($img, $x, $y, $s, $color) {
    $x=$x-$s/2;
    $y=$y-$s/4;
    $points=array($x,$y, $x+$s/2,$y+$s, $x+$s,$y);
    imagefilledpolygon($img, $points, 3, $color);
    $points=array($x,2/3*$s+$y, $x+$s/2,$y-$s/3, $x+$s,2/3*$s+$y);
    imagefilledpolygon($img, $points, 3, $color);
}

down

Steween ¶

7 years ago

My version of drawStar (with examples)

<?php
header ("Content-type: image/png");

/* drawStar or regular polygon
    $x, $y  -> Position in the image
    $radius -> Radius of the star
    $spikes -> Number of spikes (min 2)
    $ratio  -> Ratio between outer and inner points
    $dir    -> Rotation 270° for having an up spike( with ratio<1)
*/
function drawStar($x, $y, $radius, $spikes=5, $ratio=0.5, $dir=270) {
    $coordinates = array();
    $angle = 360 / $spikes ;
    for($i=0; $i<$spikes; $i++){
        $coordinates[] = $x + (       $radius * cos(deg2rad($dir+$angle*$i)));
        $coordinates[] = $y + (       $radius * sin(deg2rad($dir+$angle*$i)));
        $coordinates[] = $x + ($ratio*$radius * cos(deg2rad($dir+$angle*$i + $angle/2)));
        $coordinates[] = $y + ($ratio*$radius * sin(deg2rad($dir+$angle*$i + $angle/2)));
    }
    return $coordinates ;
}

// 14*20+24*2 = 328 Examples
$im = imagecreate(800,600);
     imagecolorallocate($im,   0,   0,   0);
$w = imagecolorallocate($im, 255, 255, 255);
$r = imagecolorallocate($im, 255,   0,   0);
for ($spikes=2; $spikes<16; $spikes++) { //[2-15] 
    for ($ratio=1; $ratio<21; $ratio++) { //[0.1-2.0]
        $values = drawStar(40*$ratio-20, $spikes*40-60, 10, $spikes, $ratio/10);
        imagefilledpolygon($im, $values, count($values)/2, ($ratio % 5 == 0) ? $r : $w);
    }
}
for ($dir=0; $dir<24; $dir++) {
    $values = drawStar(30*$dir+20, 580, 10, 2, 1.5, $dir*15);
    imagefilledpolygon($im, $values, count($values)/2, $w);
    $values = drawStar(30*$dir+20, 580, 10, 2, 0.2, $dir*15);
    imagefilledpolygon($im, $values, count($values)/2, $r);
}
imagepng($im);
imagedestroy($im);
?>

down

rbenheidorn at gmail dot com ¶

9 years ago

Discovered while working on printing geographical boundaries to an image: if you provide floating point vertices, then the decimal value is automatically truncated. This can cause images drawn with floating point vertices to shift slightly towards the top-left corner. My personal resolution is to round all of the vertices to their nearest whole values, which eliminates this shift.

down

austinoblouk at yahoo dot com ¶

15 years ago

Actually the minimum it allows is 3. It says "Total number of vertices, which must be bigger than 3." but it allows 3...

down

etnekor at tar dot hu ¶

18 years ago

There is a simple function to draw a filled point with a chosen radius and color.

<?php
function drawPoint($img, $radius, $origo_x, $origo_y, $pointColor)
{
  for ($i=0;$i<=360;$i++)
  {
    $pont[] = $origo_x + ($radius * sin(deg2rad($i)));
    $pont[] = $origo_y - ($radius * cos(deg2rad($i)));
  }
  reset($pont);
  ImageFilledPolygon ($img, $pont, (sizeof($pont)/2), $pointColor);
}
?>

down

-2

Arnapou ¶

17 years ago

I discovered that the GD imagefilledpolygon function is incorrect for some drawing with transparent color (for example red 50% : RGBA = 255, 0, 0, 64).

I tried to draw a complex form with lots of points really near (1 pixel of distance) and a transparent red.

The problem was : some border pixels were not drawn by the imagefilledpolygon but were drawn with imagepolygon !?!?

So I wrote my own imagefilledpolygon function which work very well in all case I tested.

<?php
// $points should be an array of coordinates like that :
$points = array(
    array(0, 0),
    array(100, 50),
    array(90, 100),
    array(50, 50),
    array(70, 30),
    array(10, 10),
);
?>

<?php
function myimagefilledpolygon(& $img, $points, $color) {
    $scanline = 99999;
    // compute edges
    $all_edges = array();
    $n = count($points);
    for($i=0; $i<$n; $i++) {
        $p1 = $points[$i];
        if ($i == $n-1) { $p2 = $points[0]; } else { $p2 = $points[$i+1]; }
        $x1 = $p1[0]; $y1 = $p1[1];
        $x2 = $p2[0]; $y2 = $p2[1];
        if ($y1 != $y2) {
            $invslope = ($x2 - $x1)/($y2 - $y1);
            if ($y1 < $y2 ) {
                $ymin = $y1;
                $xval = $x1;
                $ymax = $y2;
            } else {
                $ymin = $y2;
                $xval = $x2;
                $ymax = $y1;
            }
            $all_edges[] = array($ymin, $ymax, $xval, $invslope);
            if ($ymin < $scanline) { $scanline = $ymin; }
        } else {
            if ($y1 < $scanline) { $scanline = $y1; }
            if ($y2 < $scanline) { $scanline = $y2; }
        }
    }
    // draw
    $active = array();
    do {
        // add edges to active array
        $tmp = array();
        $n = count($all_edges);
        for($i=0; $i<$n; $i++) {
            if ($all_edges[$i][0] == $scanline) {
                $active[] = $all_edges[$i];
            } else {
                $tmp[] = $all_edges[$i];
            }
        }
        $all_edges = $tmp;
        // remove previous edges from active array
        $tmp = array();
        $n = count($active);
        for($i=0; $i<$n; $i++) {
            if ($active[$i][1] > $scanline) {
                $tmp[] = $active[$i];
            }
        }
        $active = $tmp;
        // sort active tab
        $n = count($active);
        for($i=0; $i<$n-1; $i++) {
            $min = $i;
            for($k=$i+1; $k<$n; $k++) {
                if ($active[$k][2] < $active[$min][2]) { $min = $k; }
            }
            if ($i != $min) {
                $tmp = $active[$i];
                $active[$i] = $active[$min];
                $active[$min] = $tmp;
            }
        }
        // draw
        $n = count($active);
        for($i=0; $i<$n; $i+=2) {
            if ($i+1 < $n) {
                if ($tmp[$i][2] == $active[$i+1][2]) {
                    imagesetpixel($img, round($active[$i][2]), $scanline, $color);
                } else {
                    imageline($img, round($active[$i][2]), $scanline, round($active[$i+1][2]), $scanline, $color);
                }
            }
        }
        // increment x values
        $n = count($active);
        for($i=0; $i<$n; $i++) { $active[$i][2] += $active[$i][3]; }
        $scanline++;
    } while (count($all_edges) + count($active) > 0);
}
?>

down

-1

webmaster at mywebsolution dot de ¶

17 years ago

Just thought that 'tatlar at yahoo dot com's function has some redundant code in it, so I tried to "improve" it. Now you can choose a variable number of spikes.

<?php
error_reporting(E_ALL);
function drawStar($x, $y, $radius, $spikes=5) {
    // $x, $y -> Position in the image
    // $radius -> Radius of the star
    // $spikes -> Number of spikes

    $coordinates = array();
    $angel = 360 / $spikes ;

    // Get the coordinates of the outer shape of the star
    $outer_shape = array();
    for($i=0; $i<$spikes; $i++){
        $outer_shape[$i]['x'] = $x + ($radius * cos(deg2rad(270 - $angel*$i)));
        $outer_shape[$i]['y'] = $y + ($radius * sin(deg2rad(270 - $angel*$i)));
    }

    // Get the coordinates of the inner shape of the star
    $inner_shape = array();
    for($i=0; $i<$spikes; $i++){
        $inner_shape[$i]['x'] = $x + (0.5*$radius * cos(deg2rad(270-180 - $angel*$i)));
        $inner_shape[$i]['y'] = $y + (0.5*$radius * sin(deg2rad(270-180 - $angel*$i)));
    }

    // Bring the coordinates in the right order
    foreach($inner_shape as $key => $value){
        if($key == (floor($spikes/2)+1))
             break;
        $inner_shape[] = $value;
        unset($inner_shape[$key]);
    }

    // Reset the keys
    $i=0;
    foreach($inner_shape as $value){
        $inner_shape[$i] = $value;
        $i++;
    }

    // "Merge" outer and inner shape
    foreach($outer_shape as $key => $value){
         $coordinates[] = $outer_shape[$key]['x'];
         $coordinates[] = $outer_shape[$key]['y'];
         $coordinates[] = $inner_shape[$key]['x'];
         $coordinates[] = $inner_shape[$key]['y'];
    }

    // Return the coordinates
    return $coordinates ;
}

// Example
$spikes = 5;

$values = drawStar(250, 250, 200, $spikes);
$im = imagecreate(500,500);
imagecolorallocate($im,0,0,0);
$w = imagecolorallocate($im, 255, 255, 255);
imagefilledpolygon($im, $values, $spikes*2, $w);
imageGIF($im);
imagedestroy($im);
?>

＋adicione uma nota