imagecolorsforindex

(PHP 4, PHP 5, PHP 7, PHP 8)

imagecolorsforindex — Получение цветов, соответствующих индексу

Описание

imagecolorsforindex(GdImage $image, int $color): array

Получение цветов, соответствующих заданному индексу.

Список параметров

image: Объект GdImage, который возвращает одна из функций, создающих изображения, например, imagecreatetruecolor().
color: Индекс цвета.

Возвращаемые значения

Возвращает ассоциативный массив с красным, зелёным, синим и альфа ключами, содержащий соответствующие значения для заданного индекса цвета.

Список изменений

Версия	Описание
8.0.0	Параметр `image` теперь ожидает экземпляр класса GdImage; раньше параметр ждал корректный `gd`-ресурс (resource).
8.0.0	Функция imagecolorsforindex() теперь выбрасывает исключение ValueError, если параметр `color` вне допустимого диапазона; ранее вместо этого возвращалось значение `false`.

Примеры

Пример #1 Пример использования imagecolorsforindex()

<?php

// открываем изображение
$im = imagecreatefrompng('nexen.png');

// получаем цвет
$start_x = 40;
$start_y = 50;
$color_index = imagecolorat($im, $start_x, $start_y);

// делаем его удобочитаемым
$color_tran = imagecolorsforindex($im, $color_index);

// что здесь ?
print_r($color_tran);

?>

Вывод приведённого примера будет похож на:

Array
(
   [red] => 226
   [green] => 222
   [blue] => 252
   [alpha] => 0
)

Смотрите также

imagecolorat() - Получение индекса цвета пиксела
imagecolorexact() - Получение индекса заданного цвета

Нашли ошибку?

Инструкция • Исправление • Сообщение об ошибке

＋Добавить

Примечания пользователей 10 notes

down

matrebatre ¶

16 years ago

Be aware that

<?php
$rgba     = imagecolorat($image, $x, $y);
$r = ($rgba >> 16) & 0xFF;
$g = ($rgba >> 8) & 0xFF;
$b = $rgba & 0xFF;
$a     = ($rgba & 0x7F000000) >> 24;
?> 

will only work for truecolor images. With eg GIF images, this will have strange results. For GIF images, you should always use imagecolorsforindex().

down

slepichev at yahoo dot com ¶

17 years ago

If you would like to change the intensity or lightness level of a specific color, you will need to convert the color format from RGB to HSL. 
following function convert RGB array(red,green,blue) to HSL array(hue, saturation, lightness)
<?php
/**
 * Convert RGB colors array into HSL array
 * 
 * @param array $ RGB colors set
 * @return array HSL set
 */
 function rgb2hsl($rgb){
    
     $clrR = ($rgb[0] / 255);
     $clrG = ($rgb[1] / 255);
     $clrB = ($rgb[2] / 255);
    
     $clrMin = min($clrR, $clrG, $clrB);
     $clrMax = max($clrR, $clrG, $clrB);
     $deltaMax = $clrMax - $clrMin;
    
     $L = ($clrMax + $clrMin) / 2;
    
     if (0 == $deltaMax){
         $H = 0;
         $S = 0;
         }
    else{
         if (0.5 > $L){
             $S = $deltaMax / ($clrMax + $clrMin);
             }
        else{
             $S = $deltaMax / (2 - $clrMax - $clrMin);
             }
         $deltaR = ((($clrMax - $clrR) / 6) + ($deltaMax / 2)) / $deltaMax;
         $deltaG = ((($clrMax - $clrG) / 6) + ($deltaMax / 2)) / $deltaMax;
         $deltaB = ((($clrMax - $clrB) / 6) + ($deltaMax / 2)) / $deltaMax;
         if ($clrR == $clrMax){
             $H = $deltaB - $deltaG;
             }
        else if ($clrG == $clrMax){
             $H = (1 / 3) + $deltaR - $deltaB;
             }
        else if ($clrB == $clrMax){
             $H = (2 / 3) + $deltaG - $deltaR;
             }
         if (0 > $H) $H += 1;
         if (1 < $H) $H -= 1;
         }
     return array($H, $S, $L);
     }
?>

down

joe dot scylla at gmail dot com ¶

17 years ago

While it's quite easy and intuitive to get the alpha transparency of a pixel with:

<?php
$rgba     = imagecolorsforindex($image, imagecolorat($image, $x, $y));
$alpha     = $rgba["alpha"];
?>

you should use the return value of the command imagecolorat to get the alpha transparency with the code below because it's much faster and will have a major impact if you process every pixel of an image:

<?php
$rgba     = imagecolorat($image, $x, $y);
$alpha     = ($rgba & 0x7F000000) >> 24;
?>

down

hofstadler dot andi at gmx dot at ¶

16 years ago

I have optimized the rgb2hsl function from slepichev a bit, so that it is a bit shorter and hopefully a bit faster:

<?php
/**
 * Convert RGB colors array into HSL array
 * 
 * @param array $ RGB colors set, each color component with range 0 to 255
 * @return array HSL set, each color component with range 0 to 1
 */
function rgb2hsl($rgb){
    $clrR = ($rgb[0]);
    $clrG = ($rgb[1]);
    $clrB = ($rgb[2]);
     
    $clrMin = min($clrR, $clrG, $clrB);
    $clrMax = max($clrR, $clrG, $clrB);
    $deltaMax = $clrMax - $clrMin;
     
    $L = ($clrMax + $clrMin) / 510;
     
    if (0 == $deltaMax){
        $H = 0;
        $S = 0;
    }
    else{
        if (0.5 > $L){
            $S = $deltaMax / ($clrMax + $clrMin);
        }
        else{
            $S = $deltaMax / (510 - $clrMax - $clrMin);
        }

        if ($clrMax == $clrR) {
            $H = ($clrG - $clrB) / (6.0 * $deltaMax);
        }
        else if ($clrMax == $clrG) {
            $H = 1/3 + ($clrB - $clrR) / (6.0 * $deltaMax);
        }
        else {
            $H = 2 / 3 + ($clrR - $clrG) / (6.0 * $deltaMax);
        }

        if (0 > $H) $H += 1;
        if (1 < $H) $H -= 1;
    }
    return array($H, $S,$L);
}
?>

down

derek at idreams dot co dot uk ¶

17 years ago

The earlier microsoft sepia example seemed to have a factor in which made it pinky... here is a modified example which uses just the Microsoft sepia (as per the wiki sepia entry)

<?
function imagetosepia(&$img) {
  if (!($t = imagecolorstotal($img))) {
    $t = 256;
    imagetruecolortopalette($img, true, $t);
  }
  $total = imagecolorstotal( $img );
  for ( $i = 0; $i < $total; $i++ ) {
    $index = imagecolorsforindex( $img, $i );
    $red = ( $index["red"] * 0.393 + $index["green"] * 0.769 + $index["blue"] * 0.189 );
    $green = ( $index["red"] * 0.349 + $index["green"] * 0.686 + $index["blue"] * 0.168 ); 
    $blue = ( $index["red"] * 0.272 + $index["green"] * 0.534 + $index["blue"] * 0.131 ); 
    if ($red > 255) { $red = 255; }
    if ($green > 255) { $green = 255; }
    if ($blue > 255) { $blue = 255; }
    imagecolorset( $img, $i, $red, $green, $blue );
  }
}
?>

down

admin at phpgfx dot com ¶

17 years ago

this is a sepia filter using microsoft's definition

<?php

function imagesepia( $img ) {
    $total = imagecolorstotal( $img );
    for ( $i = 0; $i < $total; $i++ ) {
        $index = imagecolorsforindex( $img, $i );
        $red = ( $index["red"] * 0.393 + $index["green"] * 0.769 + $index["blue"] * 0.189 ) / 1.351;
        $green = ( $index["red"] * 0.349 + $index["green"] * 0.686 + $index["blue"] * 0.168 ) / 1.203;
        $blue = ( $index["red"] * 0.272 + $index["green"] * 0.534 + $index["blue"] * 0.131 ) / 2.140;
        imagecolorset( $img, $i, $red, $green, $blue );
    }
}

?>

down

adspeed.com ¶

19 years ago

To correct m4551 at abasoft dot it example:

ImageTrueColorToPalette($im,1,$t);

might give less colors than $t, so the for loop should call "$i<ImageColorsTotal($im)" instead of "$i<$t" just to be sure, or you'll get the warning: Color index [0-9] out of range

down

strozek(a)deas()harvard()edu ¶

20 years ago

Regarding m4551's method of conversion -- the actual CCIR-approved RGB-to-grayscale conversion is as follows:

grayscale component = 0.2125*R + 0.7154*G + 0.0721*B

(cf. CCIR Recommendation 709 for modern monitors)

down

m4551 at abasoft dot it ¶

20 years ago

here's a function to greyscale an image even from a truecolor source (jpeg or png).

slightly poor quality, but very fast...

function imagegreyscale(&$img, $dither=1) {    
    if (!($t = imagecolorstotal($img))) {
        $t = 256;
        imagetruecolortopalette($img, $dither, $t);    
    }
    for ($c = 0; $c < $t; $c++) {    
        $col = imagecolorsforindex($img, $c);
        $min = min($col['red'],$col['green'],$col['blue']);
        $max = max($col['red'],$col['green'],$col['blue']);
        $i = ($max+$min)/2;
        imagecolorset($img, $c, $i, $i, $i);
    }
}

down

-1

tim at leethost dot com ¶

17 years ago

Here's a better grayscale, sepia, and general tinting function.  This function is better because:

1) Works with true color images (the other sepia code didn't).
2) Provides a more gooder grayscale conversion (yes, I said "more gooder").  The other grayscale code used imagetruecolortopalette, which just doesn't work well for grayscale conversion.
3) The other sepia code was really colorful, a little too much for my taste.  This function allows you to optionally set the tinting of the grayscale to anything you wish.
4) Single function for grayscale, sepia, and any other tinting you can dream up.

Here's some examples:

imagegrayscaletint ($img);  // Grayscale, no tinting
imagegrayscaletint ($img,304,242,209);  // What I use for sepia
imagegrayscaletint ($img,0,0,255);  // A berry blue image

The RGB values for tinting are normally from 0 to 255.  But, you can use values larger than 255 to lighten and "burn" the image.  The sepia example above does this a little, the below example provides a better example of lightening the image and burning the light areas out a little:

imagegrayscaletint ($img,400,400,400);  // Lighten image
imagegrayscaletint ($img,127,127,127);  // Darken image

<?
function imagegrayscaletint (&$img, $tint_r = 255, $tint_g = 255, $tint_b = 255) {
  $width = imagesx($img); $height = imagesy($img);
  $dest = imagecreate ($width, $height);
  for ($i=0; $i<256; $i++) imagecolorallocate ($dest, $i, $i, $i);
  imagecopyresized ($dest, $img, 0, 0, 0, 0, $width, $height, $width, $height);
  for ($i = 0; $i < 256; $i++) imagecolorset ($dest, $i, min($i * abs($tint_r) / 255, 255), min($i * abs($tint_g) / 255, 255), min($i * abs($tint_b) / 255, 255));
  $img = imagecreate ($width, $height);
  imagecopy ($img, $dest, 0, 0, 0, 0, $width, $height);
  imagedestroy ($dest);
}
?>

＋Добавить