示例列表

手册中所有示例的列表

• Example#0 - 一个介绍性的范例
• Example#1 - 第一个 PHP 脚本：hello.php
• Example#2 - 从 PHP 获取系统信息
• Example#3 - 打印一个变量（数组元素）
• Example#4 - 流程控制与函数的使用
• Example#5 - 混和 HTML 和 PHP 模式
• Example#6 - 一个简单的 HTML 表单
• Example#7 - 打印来自表单的数据
• Example#8 - Debian 下将 PHP 安装入 Apache 2 的例子
• Example#9 - 安装完 PHP 后停止并启动 Apache
• Example#10 - 取得 PHP 附加软件包的列表
• Example#11 - 安装 PHP 的 MySQL 和 cURL 支持
• Example#12 - DNF Install Example
• Example#13 - Restarting Apache once PHP is installed
• Example#14 - Methods for listing additional PHP packages
• Example#15 - Install PHP with MySQL, GD
• Example#16 - 在 OpenBSD 系统下的软件包的安装示例
• Example#17 - 部分 lighttpd.conf
• Example#18 - 产生 FastCGI 应答器
• Example#19 - 连接远程 php-fastcgi 实例
• Example#20 - 推荐的 OpCache 配置
• Example#21 - 推荐的 WinCache 配置
• Example#22 - PHP 在 Apache 2.x 中作为 handler
• Example#23 - Apache 2.x 下 CGI 方式的 PHP
• Example#24 - 配置 Apache 以 FastCGI 方式运行 PHP
• Example#25 - 命令行配置 IIS 和 PHP
• Example#26 - 注册表变化
• Example#27 - 给运行池传递环境变量和设置 PHP 的配置值
• Example#28 - 在 nginx.conf 中设定 PHP
• Example#29 - 调用 phpinfo
• Example#30 - php.ini 中的环境变量
• Example#31 - php.ini 例子
• Example#32 - Apache 配置例子
• Example#33 - PHP 开始和结束标记
• Example#34 - 使用条件的高级分离术
• Example#35 - 包含末尾换行符的结束标记的例子
• Example#36 - 整数文字表达
• Example#37 - 整数溢出
• Example#38 - PHP 7.3.0 之后的基础 Heredoc 示例
• Example#39 - 结束标识符的缩进不能超过正文的任何一行
• Example#40 - 内容（空白）和结束标识符的不同缩进
• Example#41 - 在结束标识符后继续表达式
• Example#42 - 字符串内容中的结束标识符往往会导致 ParseError
• Example#43 - PHP 7.3.0 之前的错误示例
• Example#44 - 在 PHP 7.3.0 之前有效示例
• Example#45 - Heredoc 结构的字符串示例
• Example#46 - Heredoc 结构在参数中的示例
• Example#47 - 使用 Heredoc 结构来初始化静态值
• Example#48 - 在 heredoc 结构中使用双引号
• Example#49 - Nowdoc 结构字符串示例
• Example#50 - 含变量引用的 Nowdoc 字符串示例
• Example#51 - 静态数据的示例
• Example#52 - 插值数组或属性的第一个维度值
• Example#53 - 负数索引
• Example#54 - 一些字符串示例
• Example#55 - 字符串无效下标的例子
• Example#56 - 一个简单数组
• Example#57 - 类型转换与覆盖的示例
• Example#58 - 混合 int 和 string 键名
• Example#59 - 没有键名的索引数组
• Example#60 - 仅对部分单元指定键名
• Example#61 - 复杂类型转换和覆盖的例子
• Example#62 - 访问数组单元
• Example#63 - 数组解引用
• Example#64 - 简单的数组解包
• Example#65 - 重复 key 的数组解包
• Example#66 - 使用 array()
• Example#67 - 集合
• Example#68 - 在循环中改变单元
• Example#69 - 下标从 1 开始的数组
• Example#70 - 填充数组
• Example#71 - 数组排序
• Example#72 - 递归和多维数组
• Example#73 - 回调函数示例
• Example#74 - 使用 Closure 的示例
• Example#75 - 可迭代生成器返回类型的示例
• Example#76 - 通过引用传递的参数类型
• Example#77 - 使参数可以为 null 的旧方法
• Example#78 - 基础类类型声明
• Example#79 - 基础接口类型声明
• Example#80 - 基础返回类型声明
• Example#81 - 返回对象
• Example#82 - 可为 null 参数类型声明
• Example#83 - 可为 null 返回类型声明
• Example#84 - 类属性类型化声明
• Example#85 - 参数值的严格类型
• Example#86 - 参数值的类型强制转化
• Example#87 - 返回值的严格类型
• Example#88 - 类型转换为 union 类型中的一个的示例
• Example#89 - 未初始化变量的默认值
• Example#90 - 使用 global
• Example#91 - 使用 $GLOBALS 替代 global
• Example#92 - 演示超全局变量和作用域的例子
• Example#93 - 演示需要静态变量的例子
• Example#94 - 使用静态变量的例子
• Example#95 - 静态变量与递归函数
• Example#96 - 声明静态变量
• Example#97 - 在继承方法中使用静态变量
• Example#98 - 可变属性示例
• Example#99 - 一个简单的 HTML 表单
• Example#100 - 从一个简单的 POST HTML 表单访问数据
• Example#101 - 更复杂的表单变量
• Example#102 - 一个 setcookie 的示例
• Example#103 - 合法与非法的常量名
• Example#104 - 定义常量
• Example#105 - 使用关键字 const 定义常量
• Example#106 - 结合方向
• Example#107 - 未定义执行顺序
• Example#108 - +、- 、. 具有相同的优先级
• Example#109 - PERL 字符串递减功能
• Example#110 - 数字字母字符串转换为浮点数
• Example#111 - 引用赋值
• Example#112 - 整数的 AND，OR 和 XOR 位运算符
• Example#113 - 字符串的 XOR 运算符
• Example#114 - 整数的位移
• Example#115 - Boolean/null comparison
• Example#116 - 标准数组比较代码
• Example#117 - 赋默认值
• Example#118 - 不清晰的三元运算符行为
• Example#119 - Short-ternary chaining
• Example#120 - 设置默认值
• Example#121 - 嵌套 NULL 合并运算符
• Example#122 - 逻辑运算符示例
• Example#123 - 比较数组
• Example#124 - 对类使用 instanceof
• Example#125 - 对继承类使用 instanceof
• Example#126 - 使用 instanceof 检查对象不是某个类的实例
• Example#127 - 对接口使用 instanceof
• Example#128 - 对其它变量使用 instanceof
• Example#129 - 用 instanceof 检测其它变量
• Example#130 - 使用 instanceof 测试常量
• Example#131 - 将 instanceof 与任意表达式一起使用
• Example#132 - switch 结构
• Example#133 - match 的基础用法
• Example#134 - 使用 match 和比较运算符的示例
• Example#135 - match 表达式结构
• Example#136 - match 表达式存在未处理的示例
• Example#137 - 针对整数范围，使用宽泛的表达式匹配分支
• Example#138 - 针对字符串内容，使用宽泛的表达式匹配分支
• Example#139 - Tick 的用法示例
• Example#140 - 对脚本指定编码方式
• Example#141 - 基本的 include 例子
• Example#142 - 函数中的包含
• Example#143 - 通过 HTTP 进行的 include
• Example#144 - 比较 include 的返回值
• Example#145 - include 和 return 语句
• Example#146 - 使用输出缓冲来将 PHP 文件包含入一个字符串
• Example#147 - goto 示例
• Example#148 - goto 跳出循环示例
• Example#149 - 以下写法无效
• Example#150 - 展示函数用途的伪代码
• Example#151 - 有条件的函数
• Example#152 - 函数中的函数
• Example#153 - 递归函数
• Example#154 - 向函数传递数组
• Example#155 - 函数参数使用尾部逗号
• Example#156 - 用引用传递函数参数
• Example#157 - 在函数中使用默认参数
• Example#158 - 使用非标量类型作为默认参数
• Example#159 - 使用对象作为默认值（自 PHP 8.1.0 起）
• Example#160 - 函数默认参数的不正确用法
• Example#161 - 函数默认参数正确的用法
• Example#162 - 函数默认参数正确的用法
• Example#163 - 强制参数后声明可选参数
• Example#164 - 使用 ... 来访问变量参数
• Example#165 - 使用 ... 来传递参数
• Example#166 - 输入提示的变量参数
• Example#167 - 命名参数的语法
• Example#168 - 通过位置传参与命名参数的对比
• Example#169 - 参数顺序不同的示例（同上例）
• Example#170 - 命名参数与位置参数结合使用
• Example#171 - 传递多个相同参数将会导致抛出 Error
• Example#172 - 解包后使用命名参数
• Example#173 - return 的使用
• Example#174 - 返回一个数组以得到多个返回值
• Example#175 - 从函数返回一个引用
• Example#176 - 可变函数示例
• Example#177 - 可变方法范例
• Example#178 - Variable 方法和静态属性示例
• Example#179 - 复杂调用
• Example#180 - 匿名函数示例
• Example#181 - 匿名函数变量赋值示例
• Example#182 - 从父作用域继承变量
• Example#183 - Closures 和作用域
• Example#184 - 自动绑定 $this
• Example#185 - 试图在静态匿名函数中使用 $this
• Example#186 - 试图将对象绑定到静态匿名函数
• Example#187 - 箭头函数自动捕捉变量的值
• Example#188 - 箭头函数自动捕捉变量的值，即使在嵌套的情况下
• Example#189 - 合法的箭头函数例子
• Example#190 - 来自外部范围的值不能在箭头函数内修改
• Example#191 - 简单的 first class 可调用语法
• Example#192 - Scope comparison of CallableExpr(...) and traditional callable
• Example#193 - 简单的类定义
• Example#194 - 使用 $this 伪变量的示例
• Example#195 - 创建实例
• Example#196 - 使用任意表达式创建实例
• Example#197 - 对象赋值
• Example#198 - 创建新对象
• Example#199 - 访问新创建对象的成员
• Example#200 - 访问类属性 vs. 调用类方法
• Example#201 - 类属性被赋值为匿名函数时的调用示例
• Example#202 - 简单的类继承
• Example#203 - 兼容子类方法
• Example#204 - 子类方法移除参数后，导致 Fatal 错误
• Example#205 - 子类方法把可选参数改成强制参数，导致 Fatal 错误
• Example#206 - 在子类中重命一个命名参数，导致 Error
• Example#207 - 类名的解析
• Example#208 - 解析不存在的类名
• Example#209 - 类名解析
• Example#210 - Nullsafe 操作符
• Example#211 - 属性声明
• Example#212 - 类型声明的示例
• Example#213 - 访问属性
• Example#214 - 只读属性示例
• Example#215 - 初始化只读属性异常
• Example#216 - 定义和使用一个类常量
• Example#217 - 命名空间的 ::class 示例
• Example#218 - 类常量表达式示例
• Example#219 - 自 PHP 7.1.0 起，类常量支持可见性修饰符
• Example#220 - 自动加载示例
• Example#221 - 另一个例子
• Example#222 - 继承中的构造函数
• Example#223 - 使用构造器参数
• Example#224 - 使用构造器属性提升
• Example#225 - 初始化中使用 new
• Example#226 - 使用 static 创造方法
• Example#227 - 析构函数示例
• Example#228 - 属性声明
• Example#229 - 不对称属性可见性
• Example#230 - 不对称属性继承
• Example#231 - 方法声明
• Example#232 - PHP 7.1.0 中的常量声明
• Example#233 - 访问同一个对象类型的 private 成员
• Example#234 - 继承示例
• Example#235 - The overriding method does not declare any return type
• Example#236 - The overriding method declares a wrong return type
• Example#237 - The overriding method declares a wrong return type without a deprecation notice
• Example#238 - 在类的外部使用 :: 操作符
• Example#239 - 在类定义内部使用 ::
• Example#240 - 调用父类的方法
• Example#241 - 静态方法示例
• Example#242 - 静态属性示例
• Example#243 - 抽象类示例
• Example#244 - 抽象类示例
• Example#245 - 接口示例
• Example#246 - 可扩充的接口
• Example#247 - 多接口的差异兼容性
• Example#248 - 扩展多个接口
• Example#249 - 使用接口常量
• Example#250 - 抽象（abstract）类的接口使用
• Example#251 - 同时使用扩展和实现
• Example#252 - Trait 示例
• Example#253 - 优先顺序示例
• Example#254 - 另一个优先级顺序的例子
• Example#255 - 多个 trait 的用法
• Example#256 - 冲突的解决
• Example#257 - 修改方法的访问控制
• Example#258 - 从 trait 来组成 trait
• Example#259 - 表示通过抽象方法来进行强制要求
• Example#260 - 静态变量
• Example#261 - 静态方法
• Example#262 - 静态属性
• Example#263 - 定义属性
• Example#264 - 解决冲突
• Example#265 - 定义常量
• Example#266 - 解决冲突
• Example#267 - 使用 __get()，__set()，__isset() 和 __unset() 进行属性重载
• Example#268 - 使用 __call() 和 __callStatic() 对方法重载
• Example#269 - 简单的对象遍历
• Example#270 - Sleep 和 wakeup
• Example#271 - 序列化和反序列化
• Example#272 - 简单示例
• Example#273 - 使用 __invoke()
• Example#274 - 使用 __invoke()
• Example#275 - 使用 __set_state()>
• Example#276 - 使用 __debugInfo()
• Example#277 - Final 方法示例
• Example#278 - Final 类示例
• Example#279 - PHP 8.4.0 起可用的 final 属性示例
• Example#280 - PHP 8.1.0 起可用的 final 常量示例
• Example#281 - 复制一个对象
• Example#282 - 访问新克隆的对象的成员
• Example#283 - 对象比较的例子
• Example#284 - self:: 用法
• Example#285 - static:: 简单用法
• Example#286 - 非静态环境下使用 static::
• Example#287 - 转发和非转发调用
• Example#288 - 引用和对象
• Example#289 - Creating a Lazy Ghost
• Example#290 - Creating a Lazy Proxy
• Example#291 - Initializing Properties Eagerly
• Example#292 - 命名空间语法示例
• Example#293 - 声明单个命名空间
• Example#294 - 声明单个命名空间
• Example#295 - 声明分层次的单个命名空间
• Example#296 - 定义多个命名空间，简单组合语法
• Example#297 - 定义多个命名空间，大括号语法
• Example#298 - 定义多个命名空间和不包含在命名空间中的代码
• Example#299 - 定义多个命名空间和不包含在命名空间中的代码
• Example#300 - 在命名空间内部访问全局类、函数和常量
• Example#301 - 动态访问元素
• Example#302 - 动态访问命名空间的元素
• Example#303 - __NAMESPACE__ 示例, 在命名空间中的代码
• Example#304 - __NAMESPACE__ 示例，全局代码
• Example#305 - 使用 __NAMESPACE__ 动态创建名称
• Example#306 - namespace 操作符，命名空间中的代码
• Example#307 - namespace 操作符, 全局代码
• Example#308 - 使用 use 操作符导入/使用别名
• Example#309 - 通过 use 操作符导入/使用别名，一行中包含多个 use 语句
• Example#310 - 导入和动态名称
• Example#311 - 导入和完全限定名称
• Example#312 - 不合规的导入规则
• Example#313 - 使用全局空间说明
• Example#314 - 在命名空间中访问全局类
• Example#315 - 命名空间中后备的全局函数/常量
• Example#316 - 名称解析示例
• Example#317 - 在命名空间之外访问全局类
• Example#318 - 在命名空间之外访问全局类
• Example#319 - 在命名空间内访问内置的类
• Example#320 - 在命名空间中访问内置的类、函数、常量
• Example#321 - 完全限定名称
• Example#322 - 限定名称
• Example#323 - 非限定类名
• Example#324 - 非限定函数和常量名
• Example#325 - 在双引号字符串中使用命名空间的危险性
• Example#326 - 未定义的常量
• Example#327 - 未定义的常量
• Example#328 - 值受限的基本用法
• Example#329 - 值排他的高级用法
• Example#330 - 将错误报告转成异常
• Example#331 - 抛出一个异常
• Example#332 - 带 finally 块的异常处理
• Example#333 - finally 和 return 相互之间的影响
• Example#334 - 异常嵌套
• Example#335 - 多个异常的捕获处理
• Example#336 - 忽略捕获的变量
• Example#337 - 以表达式的形式抛出
• Example#338 - 内置的异常处理类
• Example#339 - 扩展 PHP 内置的异常处理类
• Example#340 - 基础用法
• Example#341 - 将 range 实现为生成器
• Example#342 - 一个简单的生成值的例子
• Example#343 - 生成一个键值对
• Example#344 - 生成nulls
• Example#345 - 使用引用来生成值
• Example#346 - 使用 iterator_to_array 的 yield from
• Example#347 - yield from 的基本用法
• Example#348 - yield from 并返回多个值
• Example#349 - 用注解实现接口的可选方法
• Example#350 - 注解语法
• Example#351 - 通过反射 API 读取注解
• Example#352 - 使用反射 API 读取指定的注解
• Example#353 - 简单的 Attribute 类
• Example#354 - 目标限定使用的注解
• Example#355 - 使用 IS_REPEATABLE 允许注解在声明中出现多次
• Example#356 - 对未定义的变量使用引用
• Example#357 - 在函数内引用全局变量
• Example#358 - 引用与 foreach 语句
• Example#359 - $GLOBALS 范例
• Example#360 - 写入整个 $GLOBALS 将会导致错误。
• Example#361 - $_SERVER 范例
• Example#362 - $_GET 范例
• Example#363 - $_POST 范例
• Example#364 - $_ENV 范例
• Example#365 - $_COOKIE 范例
• Example#366 - $php_errormsg 范例
• Example#367 - $http_response_header 范例
• Example#368 - $argc 范例
• Example#369 - $argv 范例
• Example#370 - Exception::getMessage示例
• Example#371 - Exception::getPrevious示例
• Example#372 - Exception::getCode示例
• Example#373 - Exception::getFile示例
• Example#374 - Exception::getLine示例
• Example#375 - Exception::getTrace示例
• Example#376 - Exception::getTraceAsString示例
• Example#377 - Exception::__toString示例
• Example#378 - 使用 set_error_handler 函数将错误信息托管至 ErrorException。
• Example#379 - ErrorException::getSeverity 例子
• Example#380 - Error::getMessage 例子
• Example#381 - Error::getPrevious 例子
• Example#382 - Error::getCode 例子
• Example#383 - Error::getFile 例子
• Example#384 - Error::getLine 例子
• Example#385 - Error::getTrace 例子
• Example#386 - Error::getTraceAsString 例子
• Example#387 - Error::__toString 例子
• Example#388 - 基本用法
• Example#389 - 基本用法
• Example#390 - 基础用法
• Example#391 - ArrayAccess::offsetExists 示例
• Example#392 - 基础用法
• Example#393 - Closure::bind 示例
• Example#394 - Closure::bindTo 实例
• Example#395 - Closure::call 示例
• Example#396 - 通过类型转换为对象创建
• Example#397 - 通过 json_decode 创建
• Example#398 - 声明动态属性
• Example#399 - Generator::getReturn 示例
• Example#400 - Generator::key example
• Example#401 - 用 Generator::send 向生成器函数中传值
• Example#402 - 抛出异常到生成器
• Example#403 - 弱引用的基础用法
• Example#404 - Weakmap 用法示例
• Example#405 - 基础 Stringable 用法
• Example#406 - 基本用法
• Example#407 - 基本用法
• Example#408 - 基本用法
• Example#409 - Passing a SensitiveParameterValue object to var_dump
• Example#410 - SensitiveParameterValue::getValue example
• Example#411 - 基础的 bindto 用法示例
• Example#412 - 获取一个页面并发送 POST 数据
• Example#413 - 忽略重定向并获取 header 和内容
• Example#414 - 基础 password 用法示例
• Example#415 - 检测重定向后最终的 URL
• Example#416 - php://temp/maxmemory
• Example#417 - php://filter/resource=<待过滤的数据流>
• Example#418 - php://filter/read=<读链需要应用的过滤器列表>
• Example#419 - php://filter/write=<写链需要应用的过滤器列表>
• Example#420 - php://memory 和 php://temp 是一次性的
• Example#421 - 打印 data:// 的内容
• Example#422 - 获取媒体类型
• Example#423 - 基本用法
• Example#424 - 从一个活跃的连接中打开流
• Example#425 - $session 变量必须保持可用！
• Example#426 - 遍历 RAR 归档
• Example#427 - 打开加密文件（报头加密）
• Example#428 - 不对变量检查会导致....
• Example#429 - ... 文件系统攻击
• Example#430 - 更安全的文件名检查
• Example#431 - 更安全的文件名检查
• Example#432 - 会被空字符攻击的代码
• Example#433 - 验证输入的正确性
• Example#434 - Hashing password field
• Example#435 - 将结果集切割成页面……并创建超级用户（PostgreSQL）。
• Example#436 - 列出文章……以及一些密码（任何数据库服务器）
• Example#437 - 从重置密码……到获得更多权限（任何数据库服务器）
• Example#438 - 攻击数据库主机操作系统（MSSQL Server）
• Example#439 - 通过使用 PDO 预处理语句来避免 SQL 注入
• Example#440 - 用自定义的 HTML 页面攻击变量
• Example#441 - 利用变量打开调式功能
• Example#442 - 用 E_ALL 来查找危险的变量
• Example#443 - 危险的变量用法
• Example#444 - 把 PHP 隐藏为另一种语言
• Example#445 - 使用未知的扩展名作为 PHP 的扩展名
• Example#446 - 使用 HTML 作为 PHP 扩展名
• Example#447 - Basic HTTP 认证范例
• Example#448 - 强迫重新输入用户名和密码的 HTTP 认证的范例
• Example#449 - 文件上传表单
• Example#450 - 验证上传的文件
• Example#451 - 上传一组文件
• Example#452 - 上传多个文件
• Example#453 - 保存 HTTP PUT 文件
• Example#454 - 获取远程页面的标题
• Example#455 - 将数据保存到远程服务器
• Example#456 - 使用 -d 设置 INI 配置的示例
• Example#457 - 打印内置（且已加载的） PHP 和 Zend 模块
• Example#458 - 当使用双引号时会造成语法错误
• Example#459 - 使用单引号防止 shell 变量替换
• Example#460 - 使用 -B 、 -R 、 -E 选项统计项目总行数。
• Example#461 - 使用 -v 获取 SAPI 的名称以及 PHP 和 Zend 的版本号
• Example#462 - --ini 示例
• Example#463 - 基础 --rf 用法
• Example#464 - --rc 示例
• Example#465 - --re 示例
• Example#466 - --ri 示例
• Example#467 - PHP 脚本作为 shell 脚本执行
• Example#468 - 试图以命令行方式运行的 PHP 脚本（script.php）
• Example#469 - 运行 PHP 命令行脚本的批处理文件（script.bat）
• Example#470 - 使用交互式 shell 执行代码
• Example#471 - Tab 键补全
• Example#472 - 在交互式 shell 中设置 php.ini 配置
• Example#473 - 启动 Web 服务器
• Example#474 - 启动时指定文档根目录
• Example#475 - 使用 router 脚本
• Example#476 - 检查 CLI Web 服务器的使用
• Example#477 - 处理不支持的文件类型
• Example#478 - 从远程计算机访问 CLI Web 服务器
• Example#479 - 创建新 zval 容器
• Example#480 - 显示 zval 信息
• Example#481 - 增加 zval 的 refcount
• Example#482 - 减少 zval refcount
• Example#483 - 创建 array zval
• Example#484 - 添加已存在的元素到数组
• Example#485 - 从数组中删除元素
• Example#486 - 将数组添加为自身的一个元素
• Example#487 - 清除 $a
• Example#488 - Memory usage example
• Example#489 - GC性能影响
• Example#490 - 执行以上脚本
• Example#491 - 重新编译PHP以启用GC benchmarking
• Example#492 - GC 统计数据
• Example#493 - all_probes.d for tracing all PHP Static Probes with DTrace
• Example#494 - all_probes.stp for tracing all PHP Static Probes with SystemTap
• Example#495 - apcu_add 示例
• Example#496 - apcu_cache_info 示例
• Example#497 - apcu_cas example
• Example#498 - apcu_dec example
• Example#499 - A apcu_delete example
• Example#500 - An apcu_entry example
• Example#501 - apcu_exists example
• Example#502 - A apcu_fetch example
• Example#503 - apcu_inc example
• Example#504 - A apcu_key_info example
• Example#505 - A apcu_sma_info example
• Example#506 - apcu_store 示例
• Example#507 - A APCUIterator::__construct example
• Example#508 - 在脚本中使用错误句柄
• Example#509 - debug_backtrace 范例
• Example#510 - debug_print_backtrace 范例
• Example#511 - error_clear_last 例子
• Example#512 - An error_get_last 范例
• Example#513 - error_log 范例
• Example#514 - error_reporting 范例
• Example#515 - restore_error_handler 范例
• Example#516 - restore_exception_handler 范例
• Example#517 - 用 set_error_handler 和 trigger_error 进行错误处理
• Example#518 - set_exception_handler 范例
• Example#519 - trigger_error 示例
• Example#520 - 从共享库中调用函数
• Example#521 - 调用函数，通过参数返回结构体
• Example#522 - 访问已存在的 C 变量
• Example#523 - 创建和修改 C 变量
• Example#524 - 使用 C 数组
• Example#525 - 使用 C 枚举
• Example#526 - 将 PHP Closure 指派给 C 函数指针
• Example#527 - 输出控制举例
• Example#528 - 输出重写示例
• Example#529 - ob_end_clean 示例
• Example#530 - ob_end_flush 示例
• Example#531 - ob_get_clean 的简单示例
• Example#532 - ob_get_contents 简单示例
• Example#533 - ob_get_flush 示例
• Example#534 - ob_get_length 的简单示例
• Example#535 - 当 full_status 是 false 的返回数组
• Example#536 - 当 full_status 是 true 的返回数组
• Example#537 - ob_list_handlers 示例
• Example#538 - 用户自定义回调函数的示例
• Example#539 - 创建不可擦除的输出缓冲区
• Example#540 - output_add_rewrite_var 示例
• Example#541 - output_reset_rewrite_vars 示例
• Example#542 - assert 示例
• Example#543 - 使用自定义信息
• Example#544 - 使用自定义异常类
• Example#545 - assert_options 示例
• Example#546 - cli_get_process_title example
• Example#547 - cli_set_process_title example
• Example#548 - dl 示例
• Example#549 - extension_loaded 示例
• Example#550 - gc_enabled 示例
• Example#551 - gc_status 用法
• Example#552 - get_current_user 示例
• Example#553 - get_defined_constants 示例
• Example#554 - 打印 XML 函数
• Example#555 - get_include_path 示例
• Example#556 - get_included_files 示例
• Example#557 - get_loaded_extensions 示例
• Example#558 - Unfiltered get_resources
• Example#559 - Filtered get_resources
• Example#560 - getenv 示例
• Example#561 - getlastmod 示例
• Example#562 - getopt 示例：基本用法
• Example#563 - getopt 示例：引入长选项
• Example#564 - getopt 示例：传递同一多个选项
• Example#565 - getopt 示例：使用 rest_index
• Example#566 - getrusage 示例
• Example#567 - 一些 ini_get 示例
• Example#568 - ini_get_all 示例
• Example#569 - 禁用 details
• Example#570 - A few ini_parse_quantity examples
• Example#571 - ini_restore 示例
• Example#572 - 设置一个 ini 选项
• Example#573 - 一个 memory_get_usage 示例
• Example#574 - memory_reset_peak_usage example
• Example#575 - php_ini_loaded_file 示例
• Example#576 - 列出返回的 ini 文件的简单示例
• Example#577 - php_sapi_name 示例
• Example#578 - 一些 php_uname 的示例
• Example#579 - 一些系统相关常量的示例
• Example#580 - 打印普遍名单
• Example#581 - 打印核心开发者和文档组
• Example#582 - 打印所有贡献者
• Example#583 - phpinfo 示例
• Example#584 - phpversion 示例
• Example#585 - PHP_VERSION_ID 示例和用法
• Example#586 - 设置一个环境变量
• Example#587 - restore_include_path 示例
• Example#588 - set_include_path 示例
• Example#589 - 添加到include path
• Example#590 - sys_get_temp_dir 示例
• Example#591 - version_compare examples
• Example#592 - zend_thread_id 示例
• Example#593 - zend_version 示例
• Example#594 - Custom Superglobals with runkit.superglobal=_FOO,_BAR in php.ini
• Example#595 - A runkit7_function_add example
• Example#596 - A runkit7_function_copy example
• Example#597 - A runkit7_function_redefine example
• Example#598 - runkit7_method_add example
• Example#599 - runkit7_method_copy example
• Example#600 - runkit7_method_redefine example
• Example#601 - runkit7_method_remove example
• Example#602 - runkit7_method_rename example
• Example#603 - runkit7_zval_inspect example
• Example#604 - Basic uopz_add_function Usage
• Example#605 - uopz_allow_exit example
• Example#606 - uopz_backup example
• Example#607 - uopz_compose example
• Example#608 - uopz_copy example
• Example#609 - Basic uopz_del_function Usage
• Example#610 - uopz_delete example
• Example#611 - uopz_delete class example
• Example#612 - uopz_extend example
• Example#613 - uopz_flags example
• Example#614 - "Unfinalize" a Class
• Example#615 - uopz_function example
• Example#616 - uopz_function class example
• Example#617 - uopz_get_exit_status example
• Example#618 - Basic uopz_get_hook Usage
• Example#619 - uopz_get_mock example
• Example#620 - Basic uopz_get_property Usage
• Example#621 - uopz_get_return example
• Example#622 - Basic uopz_get_static Usage
• Example#623 - uopz_implement example
• Example#624 - uopz_overload example
• Example#625 - uopz_redefine example
• Example#626 - uopz_rename example
• Example#627 - uopz_rename class example
• Example#628 - uopz_restore example
• Example#629 - Basic uopz_set_hook Usage
• Example#630 - uopz_set_mock example
• Example#631 - uopz_set_mock example
• Example#632 - uopz_set_mock and static members
• Example#633 - Basic uopz_set_property Usage
• Example#634 - uopz_set_return example
• Example#635 - uopz_set_return example
• Example#636 - uopz_set_return class example
• Example#637 - Basic uopz_set_static Usage
• Example#638 - uopz_undefine example
• Example#639 - Basic uopz_unset_hook Usage
• Example#640 - uopz_unset_mock example
• Example#641 - uopz_unset_return example
• Example#642 - wincache.ignorelist example
• Example#643 - Authentication configuration for wincache.php
• Example#644 - Enabling WinCache session handler
• Example#645 - Enabling WinCache functions reroutes
• Example#646 - Reroute.ini file content
• Example#647 - A wincache_fcache_fileinfo example
• Example#648 - A wincache_fcache_meminfo example
• Example#649 - Using wincache_lock
• Example#650 - A wincache_ocache_fileinfo example
• Example#651 - A wincache_ocache_meminfo example
• Example#652 - A wincache_refresh_if_changed example
• Example#653 - A wincache_rplist_fileinfo example
• Example#654 - A wincache_rplist_meminfo example
• Example#655 - A wincache_scache_info example
• Example#656 - A wincache_scache_meminfo example
• Example#657 - wincache_ucache_add with key as a string
• Example#658 - wincache_ucache_add with key as an array
• Example#659 - Using wincache_ucache_cas
• Example#660 - using wincache_ucache_clear
• Example#661 - Using wincache_ucache_dec
• Example#662 - Using wincache_ucache_delete with key as a string
• Example#663 - Usingwincache_ucache_delete with key as an array
• Example#664 - Using wincache_ucache_delete with key as an array where some elements cannot be deleted
• Example#665 - Using wincache_ucache_exists
• Example#666 - wincache_ucache_get with key as a string
• Example#667 - wincache_ucache_get with key as an array
• Example#668 - Using wincache_ucache_inc
• Example#669 - Using wincache_ucache_info
• Example#670 - A wincache_ucache_meminfo example
• Example#671 - wincache_ucache_set with key as a string
• Example#672 - wincache_ucache_set with key as an array
• Example#673 - Using wincache_unlock
• Example#674 - Xhprof 范例，可选使用图形界面
• Example#675 - xhprof_disable 范例
• Example#676 - xhprof_enable 示例
• Example#677 - xhprof_sample_disable 范例
• Example#678 - Make sure the item is stored
• Example#679 - Using CHAP passwords
• Example#680 - radius_acct_open example
• Example#681 - radius_add_server example
• Example#682 - radius_auth_open example
• Example#683 - radius_create_request example
• Example#684 - radius_cvt_addr example
• Example#685 - radius_cvt_int example
• Example#686 - radius_cvt_string example
• Example#687 - radius_get_attr example
• Example#688 - radius_get_tagged_attr_data example
• Example#689 - radius_get_tagged_attr_tag example
• Example#690 - radius_get_vendor_attr example
• Example#691 - radius_put_attr example
• Example#692 - radius_put_int example
• Example#693 - radius_put_string example
• Example#694 - radius_put_vendor_attr example
• Example#695 - readline 示例
• Example#696 - Readline 回调接口示例
• Example#697 - bzip2 小例子
• Example#698 - 压缩数据
• Example#699 - 解压一个字符串
• Example#700 - bzerror 范例
• Example#701 - bzopen 范例
• Example#702 - bzread 范例
• Example#703 - bzwrite 范例
• Example#704 - 使用外部文件
• Example#705 - 使用 phar 归档内部文件
• Example#706 - 将 phar 归档从 phar 转换为 tar 文件格式
• Example#707 - phar.cache_list 用法示例
• Example#708 - 一个 Phar::addEmptyDir 示例
• Example#709 - 一个 Phar::addFile 示例
• Example#710 - 一个 Phar::addFromString 示例
• Example#711 - A Phar::apiVersion example
• Example#712 - A Phar::buildFromDirectory example
• Example#713 - A Phar::buildFromIterator with SplFileInfo
• Example#714 - A Phar::buildFromIterator with other iterators
• Example#715 - A Phar::canCompress example
• Example#716 - A Phar::canWrite example
• Example#717 - A Phar::compress example
• Example#718 - A Phar::compressFiles example
• Example#719 - A Phar::__construct example
• Example#720 - A Phar::convertToData example
• Example#721 - A Phar::convertToExecutable example
• Example#722 - A Phar::copy example
• Example#723 - A Phar::count example
• Example#724 - A Phar::createDefaultStub example
• Example#725 - A Phar::decompress example
• Example#726 - A Phar::decompressFiles example
• Example#727 - A Phar::delMetaData example
• Example#728 - Phar::delete 示例
• Example#729 - A Phar::extractTo example
• Example#730 - A Phar::getMetadata example
• Example#731 - A Phar::getStub example
• Example#732 - A Phar::hasMetadata example
• Example#733 - A Phar::interceptFileFuncs example
• Example#734 - A Phar::interceptFileFuncs example
• Example#735 - A Phar::isBuffering example
• Example#736 - A Phar::isCompressed example
• Example#737 - A Phar::loadPhar example
• Example#738 - A Phar::mapPhar example
• Example#739 - A Phar::mount example
• Example#740 - A Phar::mungServer example
• Example#741 - A Phar::offsetExists example
• Example#742 - Phar::offsetGet example
• Example#743 - A Phar::offsetSet example
• Example#744 - A Phar::offsetUnset example
• Example#745 - A Phar::running example
• Example#746 - A Phar::setAlias example
• Example#747 - A Phar::setDefaultStub example
• Example#748 - A Phar::setMetadata example
• Example#749 - A Phar::setStub example
• Example#750 - A Phar::startBuffering example
• Example#751 - A Phar::stopBuffering example
• Example#752 - A Phar::unlinkArchive example
• Example#753 - A Phar::webPhar example
• Example#754 - A PharData::addEmptyDir example
• Example#755 - A PharData::addFile example
• Example#756 - A PharData::addFromString example
• Example#757 - A PharData::buildFromDirectory example
• Example#758 - A PharData::buildFromIterator with SplFileInfo
• Example#759 - A PharData::buildFromIterator with other iterators
• Example#760 - A PharData::compress example
• Example#761 - A PharData::compressFiles example
• Example#762 - A PharData::__construct example
• Example#763 - A PharData::convertToData example
• Example#764 - A PharData::convertToExecutable example
• Example#765 - A PharData::copy example
• Example#766 - A PharData::decompress example
• Example#767 - A PharData::decompressFiles example
• Example#768 - A PharData::delMetaData example
• Example#769 - A PharData::delete example
• Example#770 - A PharData::extractTo example
• Example#771 - A PharData::offsetSet example
• Example#772 - A PharData::offsetUnset example
• Example#773 - A Phar::setMetadata example
• Example#774 - A PharFileInfo::chmod example
• Example#775 - A PharFileInfo::compress example
• Example#776 - A PharFileInfo::__construct example
• Example#777 - A PharFileInfo::decompress example
• Example#778 - A PharFileInfo::delMetaData example
• Example#779 - A PharFileInfo::getCRC32 example
• Example#780 - A PharFileInfo::getCompressedSize example
• Example#781 - A PharFileInfo::getMetadata example
• Example#782 - A PharFileInfo::getPharFlags example
• Example#783 - A PharFileInfo::isCRCChecked example
• Example#784 - A PharFileInfo::isCompressed example
• Example#785 - A PharFileInfo::setMetadata example
• Example#786 - Rar installation
• Example#787 - On-the-fly decompression
• Example#788 - RAR extension filesystem extraction example
• Example#789 - 面向对象风格
• Example#790 - 过程化风格
• Example#791 - 面向对象风格
• Example#792 - 过程化风格
• Example#793 - 面向对象风格
• Example#794 - 过程化风格
• Example#795 - 面向对象风格
• Example#796 - 过程化风格
• Example#797 - 面向对象风格
• Example#798 - 过程化风格
• Example#799 - 面向对象风格
• Example#800 - 过程化风格
• Example#801 - 面向对象风格
• Example#802 - 过程化风格
• Example#803 - Volume Callback
• Example#804 - 面向对象风格
• Example#805 - 过程化风格
• Example#806 - RarArchive::__toString example
• Example#807 - RarEntry::extract example
• Example#808 - How to extract all files in archive:
• Example#809 - RarEntry::getAttr example
• Example#810 - RarEntry::getHostOs example (version >= 2.0.0)
• Example#811 - RarEntry::getHostOs example (version <= 1.0.0)
• Example#812 - RarEntry::getMethod example
• Example#813 - RarEntry::getName example
• Example#814 - RarEntry::getPackedSize example
• Example#815 - RarEntry::getStream example
• Example#816 - RarEntry::getUnpackedSize example
• Example#817 - RarEntry::getVersion example
• Example#818 - RarException::isUsingExceptions example
• Example#819 - RarException::setUsingExceptions example
• Example#820 - 创建 Zip 归档
• Example#821 - 输出文档细节和列表
• Example#822 - Zip 流封装，读取 OpenOffice 文件的元信息
• Example#823 - Zip 使用范例
• Example#824 - Create a new directory in an archive
• Example#825 - Open and add
• Example#826 - Add an entry to a new archive
• Example#827 - Add file to a directory inside an archive
• Example#828 - ZipArchive::addGlob example
• Example#829 - ZipArchive::addPattern example
• Example#830 - Delete file from archive using its index
• Example#831 - Deleting a file and directory from an archive, using names
• Example#832 - 提取所有条目
• Example#833 - 提取两个条目
• Example#834 - Dump an archive comment
• Example#835 - 测试归档是否是 torrentzip 格式
• Example#836 - Dump an entry comment
• Example#837 - Dump an entry comment
• Example#838 - Extract all entries with Unix rights
• Example#839 - Get the file contents
• Example#840 - Get the file contents
• Example#841 - Convert an image from a zip entry
• Example#842 - ZipArchive::getNameIndex example
• Example#843 - Get the entry contents with fread and store it
• Example#844 - Same as the previous example but with fopen and the zip stream wrapper
• Example#845 - Stream wrapper and image, can be used with the xml function as well
• Example#846 - Get the entry contents with fread and store it
• Example#847 - Get the entry contents with fread and store it
• Example#848 - Create an archive and then use it with ZipArchive::locateName
• Example#849 - Open and extract
• Example#850 - Create an archive
• Example#851 - Create an temporary archive
• Example#852 - Archive a file
• Example#853 - Archive a file
• Example#854 - Rename one entry
• Example#855 - Rename one entry
• Example#856 - Open and replace
• Example#857 - Create an archive and set a comment
• Example#858 - 创建 torrentzip 归档
• Example#859 - Open an archive and set a comment for an entry
• Example#860 - Open an archive and set a comment for an entry
• Example#861 - Add files with different compression methods to an archive
• Example#862 - Add files with different compression methods to an archive
• Example#863 - Add file and set compression method
• Example#864 - Archive and encrypt a file
• Example#865 - Archive a file, with its Unix rights
• Example#866 - Archive a file
• Example#867 - Archive a file
• Example#868 - Dump the stat info of an entry
• Example#869 - Dump the stat info of an entry
• Example#870 - Small Zlib Example
• Example#871 - Working with the incremental compression and decompression API
• Example#872 - gzclose example
• Example#873 - gzcompress example
• Example#874 - gzdeflate example
• Example#875 - Creating a gzip file
• Example#876 - gzeof example
• Example#877 - gzfile example
• Example#878 - gzgetc example
• Example#879 - gzgets example
• Example#880 - gzgetss example
• Example#881 - gzinflate example
• Example#882 - gzopen Example
• Example#883 - gzpassthru example
• Example#884 - gzread example
• Example#885 - gzseek example
• Example#886 - gzuncompress example
• Example#887 - gzwrite example
• Example#888 - ob_gzhandler 示例
• Example#889 - zlib_encode example
• Example#890 - hash 示例
• Example#891 - hash_algos 示例
• Example#892 - hash_copy 示例
• Example#893 - hash_equals 示例
• Example#894 - hash_file 示例
• Example#895 - hash_hkdf example
• Example#896 - hash_hmac 示例
• Example#897 - hash_hmac_algos 示例
• Example#898 - hash_hmac_file 示例
• Example#899 - 增量散列运算示例
• Example#900 - hash_pbkdf2 示例，基础用法
• Example#901 - hash_update_stream 示例
• Example#902 - mcrypt_create_iv 示例
• Example#903 - mcrypt_enc_get_algorithms_name 示例
• Example#904 - mcrypt_enc_get_modes_name 示例
• Example#905 - mcrypt_enc_get_supported_key_sizes 示例
• Example#906 - mcrypt_encrypt 示例
• Example#907 - mcrypt_get_block_size 示例
• Example#908 - mcrypt_get_cipher_name 示例
• Example#909 - mcrypt_get_iv_size 示例
• Example#910 - mcrypt_get_key_size 示例
• Example#911 - mcrypt_list_algorithms 示例
• Example#912 - mcrypt_list_modes 示例
• Example#913 - mcrypt_module_open 示例
• Example#914 - 在加密中使用 mcrypt_module_open
• Example#915 - mcrypt_module_self_test 示例
• Example#916 - mdecrypt_generic 示例
• Example#917 - Computes the MD5 digest and hmac and print it out as hex
• Example#918 - Traversing all hashes
• Example#919 - mhash_get_block_size Example
• Example#920 - mhash_get_hash_name Example
• Example#921 - openssl_cipher_iv_length 范例
• Example#922 - openssl_cipher_key_length example
• Example#923 - openssl_cms_sign example
• Example#924 - openssl_csr_export() 示例
• Example#925 - openssl_csr_export_to_file() 范例
• Example#926 - openssl_csr_get_public_key() 示例
• Example#927 - openssl_csr_get_subject() 示例
• Example#928 - 创建一个自签名的证书
• Example#929 - 创建一个自签名的 ECC 证书（从 PHP 7.1.0 开始）
• Example#930 - openssl_csr_sign 示例——签署 CSR（如何实现自己的 CA）
• Example#931 - 计算共享秘密
• Example#932 - 在 php 中生成 DH 公/私钥对
• Example#933 - PHP 7.1 之前的 GCM 模式的 AES 认证加密示例
• Example#934 - PHP 5.6+ 的 AES 认证加密例子
• Example#935 - openssl_error_string example
• Example#936 - openssl_get_cert_locations 范例
• Example#937 - openssl_get_cipher_methods example
• Example#938 - openssl_get_curve_names 示例
• Example#939 - openssl_get_md_methods 范例：
• Example#940 - openssl_open 示例
• Example#941 - openssl_pbkdf2() 示例
• Example#942 - openssl_pkcs12_read 示例
• Example#943 - openssl_pkcs7_decrypt 示例
• Example#944 - openssl_pkcs7_encrypt 示例
• Example#945 - 根据 P7B 文件获取 PEM 数组
• Example#946 - openssl_pkcs7_sign 示例
• Example#947 - openssl_pkey_derive example
• Example#948 - Obtain the public key from a private key
• Example#949 - openssl_random_pseudo_bytes 示例
• Example#950 - openssl_seal 示例
• Example#951 - openssl_sign example
• Example#952 - openssl_sign example
• Example#953 - openssl_spki_export 示例
• Example#954 - openssl_spki_export 来自 <keygen> 的示例
• Example#955 - openssl_spki_export_challenge 示例
• Example#956 - openssl_spki_export_challenge 来自 <keygen> 的示例
• Example#957 - openssl_spki_new 示例
• Example#958 - openssl_spki_verify 示例
• Example#959 - openssl_spki_verify 来自 <keygen> 的示例
• Example#960 - openssl_verify 示例
• Example#961 - openssl_verify 示例
• Example#962 - openssl_x509_verify example
• Example#963 - Basic password_algos usage
• Example#964 - password_hash 示例
• Example#965 - password_hash 手动设置 cost 的示例
• Example#966 - 寻找最佳 cost 的 password_hash 示例
• Example#967 - 使用 Argon2i 的 password_hash 示例
• Example#968 - password_needs_rehash用法
• Example#969 - password_verify 示例
• Example#970 - RNP clearsign example
• Example#971 - simple callback function example
• Example#972 - sodium_crypto_box_seal example
• Example#973 - sodium_crypto_box_seal_open example
• Example#974 - sodium_crypto_core_ristretto255_add example
• Example#975 - sodium_crypto_core_ristretto255_from_hash example
• Example#976 - sodium_crypto_core_ristretto255_is_valid_point example
• Example#977 - sodium_crypto_core_ristretto255_random example
• Example#978 - sodium_crypto_core_ristretto255_scalar_add example
• Example#979 - sodium_crypto_core_ristretto255_scalar_invert example
• Example#980 - sodium_crypto_core_ristretto255_scalar_negate example
• Example#981 - sodium_crypto_core_ristretto255_scalar_random example
• Example#982 - sodium_crypto_core_ristretto255_scalar_sub example
• Example#983 - sodium_crypto_core_ristretto255_sub example
• Example#984 - sodium_crypto_generichash_final example
• Example#985 - sodium_crypto_generichash_init example
• Example#986 - sodium_crypto_generichash_update example
• Example#987 - sodium_crypto_kx_keypair usage
• Example#988 - sodium_crypto_pwhash example
• Example#989 - sodium_crypto_pwhash_str example
• Example#990 - sodium_crypto_secretbox example
• Example#991 - sodium_crypto_secretbox_keygen example
• Example#992 - Comparing sodium_crypto_secretbox_keygen with random_bytes
• Example#993 - sodium_crypto_secretbox_open example
• Example#994 - sodium_crypto_secretstream_xchacha20poly1305_init_pull example
• Example#995 - sodium_crypto_secretstream_xchacha20poly1305_init_push example
• Example#996 - sodium_crypto_stream_xchacha20_xor_ic example
• Example#997 - DBA example
• Example#998 - Traversing a database
• Example#999 - dba_handlers 示例
• Example#1000 - List Privileges for a Column
• Example#1001 - List Columns of a Table
• Example#1002 - DSN-less connections
• Example#1003 - odbc_connection_string_quote example
• Example#1004 - List available DSNs
• Example#1005 - odbc_execute and odbc_prepare example
• Example#1006 - odbc_fetch_into examples
• Example#1007 - odbc_next_result
• Example#1008 - odbc_execute and odbc_prepare example
• Example#1009 - List primary Keys of a Column
• Example#1010 - List Columns of a stored Procedure
• Example#1011 - List stored Procedures of a Database
• Example#1012 - odbc_result examples
• Example#1013 - odbc_setoption examples
• Example#1014 - List Statistics of a Table
• Example#1015 - List Privileges of a Table
• Example#1016 - List Tables in a Catalog
• Example#1017 - 使用 PDO::ATTR_DRIVER_NAME 的例子
• Example#1018 - 连接到 MySQL
• Example#1019 - 处理连接错误
• Example#1020 - 关闭连接
• Example#1021 - 持久化连接
• Example#1022 - 在事务中执行批处理
• Example#1023 - 用预处理语句进行重复插入
• Example#1024 - 用预处理语句进行重复插入
• Example#1025 - 使用预处理语句获取数据
• Example#1026 - Calling a stored procedure with an output parameter
• Example#1027 - 带输入/输出参数调用存储过程
• Example#1028 - 占位符的无效使用
• Example#1029 - 创建 PDO 实例并设置错误模式
• Example#1030 - 创建 PDO 实例并在构造函数中设置错误模式
• Example#1031 - 从数据库中显示一张图片
• Example#1032 - 插入一张图片到数据库
• Example#1033 - 插入一张图片到数据库：Oracle
• Example#1034 - 回滚一个事务
• Example#1035 - 提交一个基础事务
• Example#1036 - 提交一个DDL事务
• Example#1037 - 通过驱动程序调用创建 PDO 实例
• Example#1038 - 通过 URI 调用创建 PDO 实例
• Example#1039 - 使用别名创建一个PDO实例
• Example#1040 - 取得一个 SQLSTATE 码
• Example#1041 - Displaying errorInfo() fields for a PDO_ODBC connection to a DB2 database
• Example#1042 - 发出 DELETE 语句
• Example#1043 - 取回数据库连接属性
• Example#1044 - PDO::getAvailableDrivers 示例
• Example#1045 - 命名参数形式的 SQL 语句模板
• Example#1046 - 问号形式的 SQL 语句模板
• Example#1047 - 问号转义的 SQL 语句模板
• Example#1048 - 没有占位符的 SQL 可以使用 PDO::query 执行
• Example#1049 - 普通字符串加引号
• Example#1050 - 危险字符串加引号
• Example#1051 - 复杂字符串加引号
• Example#1052 - 回滚一个事务
• Example#1053 - 把结果集输出绑定到 PHP 变量
• Example#1054 - 执行一条使用命名占位符的预处理语句
• Example#1055 - 执行一条使用问号占位符的预处理语句
• Example#1056 - 使用 INOUT 参数调用一个存储过程
• Example#1057 - 执行一条使用命名占位符的预处理语句
• Example#1058 - 执行一条使用问号占位符的预处理语句
• Example#1059 - PDOStatement::closeCursor 示例
• Example#1060 - 计算列数
• Example#1061 - PDOStatement::debugDumpParams 使用命名参数的示例
• Example#1062 - PDOStatement::debugDumpParams 使用未命名参数的示例
• Example#1063 - 检索 SQLSTATE 码
• Example#1064 - 显示连接到DB2数据库的 PDO_ODBC 连接的 errorInfo() 的字段
• Example#1065 - 执行绑定变量和值的预处理语句
• Example#1066 - 使用命名值数组执行预处理语句
• Example#1067 - 使用位置值数组执行预处理语句
• Example#1068 - 使用绑定到位置占位符的变量执行预处理语句
• Example#1069 - 使用数组执行一条含有 IN 子句的预处理语句
• Example#1070 - 使用不同的提取方式获取行
• Example#1071 - 使用一个可滚动游标获取行
• Example#1072 - 构造顺序
• Example#1073 - 获取结果集中所有剩余的行
• Example#1074 - 获取结果集中单独一列的所有值
• Example#1075 - 根据单独的一列把所有值分组
• Example#1076 - 每行结果实例化一个类
• Example#1077 - 每行调用一次函数
• Example#1078 - 返回下一行的第一列
• Example#1079 - 检索列的元数据
• Example#1080 - 获取由一个存储过程返回的多个行集合
• Example#1081 - 返回删除的行数
• Example#1082 - 计算由一个 SELECT 语句返回的行数
• Example#1083 - 设置获取模式
• Example#1084 - Insert LOBs in CUBRID PDO
• Example#1085 - Fetch LOBs in CUBRID PDO
• Example#1086 - Insert set in CUBRID PDO with default data type.
• Example#1087 - Specify data type when insert set in CUBRID PDO
• Example#1088 - PDO_CUBRID DSN examples
• Example#1089 - A PDO::cubrid_schema example
• Example#1090 - PDO_DBLIB DSN examples
• Example#1091 - PDO_FIREBIRD DSN example with path
• Example#1092 - PDO_FIREBIRD DSN example with port and path
• Example#1093 - PDO_FIREBIRD DSN example with localhost and path to employee.fdb on Debian system
• Example#1094 - PDO_FIREBIRD DSN to connect to a dialect 1 database
• Example#1095 - PDO_IBM DSN example using db2cli.ini
• Example#1096 - PDO_IBM DSN example using a connection string
• Example#1097 - PDO_INFORMIX DSN example using odbc.ini
• Example#1098 - PDO_INFORMIX DSN example using a connection string
• Example#1099 - Setting MySQL unbuffered mode
• Example#1100 - PDO_MYSQL DSN examples
• Example#1101 - PDO_SQLSRV DSN examples
• Example#1102 - PDO_OCI DSN examples
• Example#1103 - PDO_ODBC DSN example (ODBC driver manager)
• Example#1104 - PDO_ODBC DSN example (IBM DB2 uncataloged connection)
• Example#1105 - PDO_ODBC DSN example (Microsoft Access uncataloged connection)
• Example#1106 - PDO_PGSQL DSN examples
• Example#1107 - A PDO::pgsqlLOBCreate example
• Example#1108 - A PDO::pgsqlLOBOpen example
• Example#1109 - A PDO::pgsqlLOBUnlink example
• Example#1110 - PDO_SQLITE DSN examples
• Example#1111 - max_length aggregation function example
• Example#1112 - PDO::sqliteCreateCollation example
• Example#1113 - PDO::sqliteCreateFunction example
• Example#1114 - 数据查询的例子
• Example#1115 - 数据插入的例子
• Example#1116 - cubrid_bind example
• Example#1117 - cubrid_bind BLOB/CLOB example
• Example#1118 - cubrid_bind BLOB/CLOB example
• Example#1119 - cubrid_close_prepare example
• Example#1120 - cubrid_close_request example
• Example#1121 - cubrid_col_get example
• Example#1122 - cubrid_col_size example
• Example#1123 - cubrid_column_names example
• Example#1124 - cubrid_column_types example
• Example#1125 - cubrid_commit example
• Example#1126 - cubrid_connect example
• Example#1127 - cubrid_connect_with_url url without properties example
• Example#1128 - cubrid_connect_with_url url with properties example
• Example#1129 - cubrid_current_oid example
• Example#1130 - cubrid_disconnect example
• Example#1131 - cubrid_drop example
• Example#1132 - cubrid_error_code example
• Example#1133 - cubrid_error_code_facility example
• Example#1134 - cubrid_error_msg example
• Example#1135 - cubrid_execute example
• Example#1136 - cubrid_fetch example
• Example#1137 - cubrid_free_result example
• Example#1138 - cubrid_get example
• Example#1139 - cubrid_get_charset example
• Example#1140 - cubrid_get_class_name example
• Example#1141 - cubrid_get_client_info example
• Example#1142 - cubrid_get_db_parameter example
• Example#1143 - cubrid_get_query_timeout example
• Example#1144 - cubrid_get_server_info example
• Example#1145 - cubrid_insert_id example
• Example#1146 - cubrid_is_instance example
• Example#1147 - cubrid_lob_close example
• Example#1148 - cubrid_lob_export example
• Example#1149 - cubrid_lob_get example
• Example#1150 - cubrid_lob_send example
• Example#1151 - cubrid_lob_size example
• Example#1152 - cubrid_lob2_bind example
• Example#1153 - cubrid_lob2_export example
• Example#1154 - cubrid_lob2_export example
• Example#1155 - cubrid_lob2_read example 1
• Example#1156 - cubrid_lob2_read example 2
• Example#1157 - cubrid_lob2_seek example
• Example#1158 - cubrid_lob2_seek64 example
• Example#1159 - cubrid_lob2_write example 1
• Example#1160 - cubrid_lob2_write example 2
• Example#1161 - cubrid_lock_read example
• Example#1162 - cubrid_lock_write example
• Example#1163 - cubrid_move_cursor example
• Example#1164 - cubrid_next_result example
• Example#1165 - cubrid_num_cols example
• Example#1166 - cubrid_num_rows example
• Example#1167 - cubrid_connect example
• Example#1168 - cubrid_pconnect_with_url url without properties example
• Example#1169 - cubrid_pconnect_with_url url with properties example
• Example#1170 - cubrid_prepare example
• Example#1171 - cubrid_put example
• Example#1172 - cubrid_rollback example
• Example#1173 - cubrid_schema example
• Example#1174 - cubrid_seq_drop example
• Example#1175 - cubrid_seq_insert example
• Example#1176 - cubrid_seq_put example
• Example#1177 - cubrid_set_add example
• Example#1178 - cubrid_get_db_parameter example
• Example#1179 - cubrid_set_drop example
• Example#1180 - cubrid_version example
• Example#1181 - cubrid_affected_rows example
• Example#1182 - cubrid_client_encoding example
• Example#1183 - cubrid_close example
• Example#1184 - cubrid_data_seek example
• Example#1185 - cubrid_db_name example
• Example#1186 - cubrid_errno example
• Example#1187 - cubrid_error example
• Example#1188 - cubrid_fetch_array example
• Example#1189 - cubrid_fetch_assoc example
• Example#1190 - cubrid_fetch_field example
• Example#1191 - cubrid_fetch_lengths example
• Example#1192 - cubrid_fetch_object example
• Example#1193 - cubrid_fetch_row example
• Example#1194 - cubrid_field_flags example
• Example#1195 - cubrid_field_len example
• Example#1196 - cubrid_field_name example
• Example#1197 - cubrid_field_seek example
• Example#1198 - cubrid_field_table example
• Example#1199 - cubrid_field_type example
• Example#1200 - cubrid_list_dbs example
• Example#1201 - cubrid_num_fields example
• Example#1202 - cubrid_ping example
• Example#1203 - Invalid Query
• Example#1204 - Valid Query
• Example#1205 - cubrid_real_escape_string example
• Example#1206 - cubrid_result example
• Example#1207 - cubrid_unbuffered_query example
• Example#1208 - cubrid_load_from_glo example
• Example#1209 - cubrid_new_glo example
• Example#1210 - cubrid_save_to_glo example
• Example#1211 - cubrid_send_glo example
• Example#1212 - Inserting a record in a dBase database
• Example#1213 - Closing a dBase database file
• Example#1214 - Creating a dBase database file
• Example#1215 - Showing header information for a dBase database file
• Example#1216 - Listing all the registered members in the database
• Example#1217 - dbase_numfields Example
• Example#1218 - Looping over all the records of the database
• Example#1219 - Opening a dBase database file
• Example#1220 - Emptying a dBase database
• Example#1221 - Updating a record in the database
• Example#1222 - ibase_backup example
• Example#1223 - ibase_backup example with arguments
• Example#1224 - ibase_blob_get example
• Example#1225 - ibase_blob_import example
• Example#1226 - ibase_connect example
• Example#1227 - ibase_execute example
• Example#1228 - ibase_fetch_object example
• Example#1229 - ibase_field_info example
• Example#1230 - ibase_name_result example
• Example#1231 - ibase_num_fields example
• Example#1232 - ibase_query example
• Example#1233 - ibase_restore example
• Example#1234 - ibase_restore example with arguments
• Example#1235 - ibase_service_attach example
• Example#1236 - ibase_service_attach example
• Example#1237 - ibase_service_attach example using hostname/port syntax
• Example#1238 - ibase_service_detach example
• Example#1239 - ibase_set_event_handler example
• Example#1240 - Retrieving the AUTOCOMMIT value for a connection
• Example#1241 - Setting the AUTOCOMMIT value for a connection
• Example#1242 - Binding PHP variables to a prepared statement
• Example#1243 - Calling stored procedures with IN and OUT parameters
• Example#1244 - Inserting a binary large object (BLOB) directly from a file
• Example#1245 - A db2_client_info example
• Example#1246 - Closing a connection
• Example#1247 - Retrieving an SQLSTATE value for a failed connection attempt
• Example#1248 - Retrieving the error message returned by a failed connection attempt
• Example#1249 - Creating a cataloged connection
• Example#1250 - Creating an uncataloged connection
• Example#1251 - Creating a connection with autocommit off by default
• Example#1252 - i5/OS best performance
• Example#1253 - Using trusted context
• Example#1254 - A db2_escape_string example
• Example#1255 - Creating a table with db2_exec
• Example#1256 - Executing a SELECT statement with a scrollable cursor
• Example#1257 - Returning XML data as an SQL ResultSet
• Example#1258 - Performing a "JOIN" with XML data
• Example#1259 - Returning SQL data as part of a larger XML document
• Example#1260 - Preparing and executing an SQL statement with parameter markers
• Example#1261 - Calling a stored procedure with an OUT parameter
• Example#1262 - Returning XML data as an SQL ResultSet
• Example#1263 - Performing a "JOIN" with XML data
• Example#1264 - Returning SQL data as part of a larger XML document
• Example#1265 - Iterating through a forward-only cursor
• Example#1266 - Retrieving specific rows with db2_fetch_array from a scrollable cursor
• Example#1267 - Iterating through a forward-only cursor
• Example#1268 - Retrieving specific rows with db2_fetch_assoc from a scrollable cursor
• Example#1269 - Iterating through a forward-only cursor
• Example#1270 - Retrieving specific rows with db2_fetch_both from a scrollable cursor
• Example#1271 - A db2_fetch_object example
• Example#1272 - Iterating through a result set
• Example#1273 - i5/OS recommended alternatives to db2_fetch_row/db2_result
• Example#1274 - Setting and retrieving parameters through a connection resource
• Example#1275 - A db2_last_insert_id example
• Example#1276 - Iterating through different types of data
• Example#1277 - Calling a stored procedure that returns multiple result sets
• Example#1278 - Retrieving the number of fields in a result set
• Example#1279 - Closing a persistent connection
• Example#1280 - A db2_pconnect example
• Example#1281 - Using trusted context
• Example#1282 - Preparing and executing an SQL statement with parameter markers
• Example#1283 - A db2_result example
• Example#1284 - Rolling back a DELETE statement
• Example#1285 - A db2_server_info example
• Example#1286 - Setting one parameter with a connection resource
• Example#1287 - Setting multiple parameters with a connection resource
• Example#1288 - Setting multiple parameters with an invalid key
• Example#1289 - Setting multiple parameters with an invalid value
• Example#1290 - Setting multiple parameters with a connection resource and the wrong type
• Example#1291 - Setting multiple parameters with the wrong resource
• Example#1292 - Putting it all together
• Example#1293 - i5/OS cursors are read-only
• Example#1294 - MongoDB\Driver\Manager::__construct basic example
• Example#1295 - MongoDB\Driver\Manager::__construct basic examples
• Example#1296 - MongoDB\Driver\Manager::executeBulkWrite example
• Example#1297 - MongoDB\Driver\Manager::executeCommand with a command returning a single result document
• Example#1298 - MongoDB\Driver\Manager::executeCommand with a command returning a cursor
• Example#1299 - Limiting execution time for a command
• Example#1300 - MongoDB\Driver\Manager::executeQuery example
• Example#1301 - Limiting execution time for a query
• Example#1302 - MongoDB\Driver\Manager::getReadConcern example
• Example#1303 - MongoDB\Driver\Manager::getReadPreference example
• Example#1304 - MongoDB\Driver\Manager::getServers example
• Example#1305 - MongoDB\Driver\Manager::getWriteConcern example
• Example#1306 - Composing MongoDB\Driver\Command to provide a helper to create collections
• Example#1307 - MongoDB\Driver\Command::__construct example
• Example#1308 - MongoDB\Driver\Command::__construct example
• Example#1309 - MongoDB\Driver\Query::__construct example
• Example#1310 - Mixed write operations are grouped by type
• Example#1311 - Ordered write operations causing an error
• Example#1312 - MongoDB\Driver\BulkWrite::__construct example
• Example#1313 - MongoDB\Driver\BulkWrite::count example
• Example#1314 - MongoDB\Driver\BulkWrite::delete example
• Example#1315 - MongoDB\Driver\BulkWrite::insert example
• Example#1316 - MongoDB\Driver\BulkWrite::update example
• Example#1317 - Declare an API version on a manager
• Example#1318 - Declare a strict API version on a manager
• Example#1319 - MongoDB\Driver\WriteConcern::bsonSerialize with majority write concern
• Example#1320 - MongoDB\Driver\WriteConcern::bsonSerialize with wtimeout and journal
• Example#1321 - MongoDB\Driver\WriteConcern::__construct example
• Example#1322 - MongoDB\Driver\WriteConcern::getJournal example
• Example#1323 - MongoDB\Driver\WriteConcern::getW example
• Example#1324 - MongoDB\Driver\WriteConcern::getWtimeout example
• Example#1325 - MongoDB\Driver\WriteConcern::isDefault example
• Example#1326 - MongoDB\Driver\ReadPreference::bsonSerialize with primary read preference
• Example#1327 - MongoDB\Driver\ReadPreference::bsonSerialize with secondary read preference and tag sets
• Example#1328 - MongoDB\Driver\ReadPreference::bsonSerialize with secondary read preference and max staleness
• Example#1329 - MongoDB\Driver\ReadPreference::__construct example
• Example#1330 - MongoDB\Driver\ReadPreference::getMaxStalenessSeconds example
• Example#1331 - MongoDB\Driver\ReadPreference::getMode example
• Example#1332 - MongoDB\Driver\ReadPreference::getModeString example
• Example#1333 - MongoDB\Driver\ReadPreference::getTagSets example
• Example#1334 - MongoDB\Driver\ReadConcern::bsonSerialize with empty read concern
• Example#1335 - MongoDB\Driver\ReadConcern::bsonSerialize with local read concern
• Example#1336 - MongoDB\Driver\ReadConcern::__construct example
• Example#1337 - MongoDB\Driver\ReadConcern::getLevel example
• Example#1338 - MongoDB\Driver\ReadConcern::isDefault example
• Example#1339 - Reading a result set
• Example#1340 - Reading a result set for a tailable cursor
• Example#1341 - MongoDB\Driver\Cursor::getId example
• Example#1342 - MongoDB\Driver\Cursor::getServer example
• Example#1343 - MongoDB\Driver\Cursor::isDead example
• Example#1344 - MongoDB\Driver\Cursor::setTypeMap example
• Example#1345 - MongoDB\Driver\Cursor::toArray example
• Example#1346 - MongoDB\Driver\CursorId::__toString example
• Example#1347 - MongoDB\Driver\Server::getHost example
• Example#1348 - MongoDB\Driver\Server::getInfo example
• Example#1349 - MongoDB\Driver\Server::getLatency example
• Example#1350 - MongoDB\Driver\Server::getPort example
• Example#1351 - MongoDB\Driver\WriteConcernError::getCode example
• Example#1352 - MongoDB\Driver\WriteConcernError::getInfo example
• Example#1353 - MongoDB\Driver\WriteConcernError::getMessage example
• Example#1354 - MongoDB\Driver\WriteError::getCode example
• Example#1355 - MongoDB\Driver\WriteError::getIndex example
• Example#1356 - MongoDB\Driver\WriteError::getMessage example
• Example#1357 - MongoDB\Driver\WriteResult::getDeletedCount example
• Example#1358 - MongoDB\Driver\WriteResult::getInsertedCount example
• Example#1359 - MongoDB\Driver\WriteResult::getMatchedCount example
• Example#1360 - MongoDB\Driver\WriteResult::getModifiedCount example
• Example#1361 - MongoDB\Driver\WriteResult::getServer example
• Example#1362 - MongoDB\Driver\WriteResult::getUpsertedCount example
• Example#1363 - MongoDB\Driver\WriteResult::getUpsertedIds example
• Example#1364 - MongoDB\Driver\WriteResult::getWriteConcernError example
• Example#1365 - MongoDB\Driver\WriteResult::getWriteErrors with a single error
• Example#1366 - MongoDB\Driver\WriteResult::getWriteErrors with multiple errors
• Example#1367 - MongoDB\Driver\WriteResult::isAcknowledged with acknowledged write concern
• Example#1368 - MongoDB\Driver\WriteResult::isAcknowledged with unacknowledged write concern
• Example#1369 - MongoDB\BSON\fromJSON example
• Example#1370 - MongoDB\BSON\fromPHP example
• Example#1371 - MongoDB\BSON\toCanonicalExtendedJSON example
• Example#1372 - MongoDB\BSON\toJSON example
• Example#1373 - MongoDB\BSON\toPHP example
• Example#1374 - MongoDB\BSON\toRelaxedExtendedJSON example
• Example#1375 - MongoDB\BSON\Document::toCanonicalExtendedJSON example
• Example#1376 - MongoDB\BSON\Document::toRelaxedExtendedJSON example
• Example#1377 - MongoDB\BSON\PackedArray::fromJSON example
• Example#1378 - MongoDB\BSON\PackedArray::toCanonicalExtendedJSON example
• Example#1379 - MongoDB\BSON\PackedArray::toRelaxedExtendedJSON example
• Example#1380 - MongoDB\BSON\Binary::__construct example
• Example#1381 - MongoDB\BSON\Binary::getData example
• Example#1382 - MongoDB\BSON\Binary::getType example
• Example#1383 - MongoDB\BSON\Binary::__toString example
• Example#1384 - MongoDB\BSON\Decimal128::__construct example
• Example#1385 - MongoDB\BSON\Decimal128::__toString example
• Example#1386 - MongoDB\BSON\Javascript::__construct example
• Example#1387 - MongoDB\BSON\Javascript::getCode example
• Example#1388 - MongoDB\BSON\Javascript::getScope example
• Example#1389 - MongoDB\BSON\Javascript::__toString example
• Example#1390 - MongoDB\BSON\MaxKey::__construct example
• Example#1391 - MongoDB\BSON\MinKey::__construct example
• Example#1392 - MongoDB\BSON\ObjectId::__construct example
• Example#1393 - MongoDB\BSON\ObjectId::getTimestamp example
• Example#1394 - MongoDB\BSON\ObjectId::__toString example
• Example#1395 - MongoDB\BSON\Regex::__construct example
• Example#1396 - MongoDB\BSON\Regex::getFlags example
• Example#1397 - MongoDB\BSON\Regex::getPattern example
• Example#1398 - MongoDB\BSON\Regex::__toString example
• Example#1399 - MongoDB\BSON\Timestamp::__construct example
• Example#1400 - MongoDB\BSON\Timestamp::__toString example
• Example#1401 - MongoDB\BSON\UTCDateTime::__construct example
• Example#1402 - MongoDB\BSON\UTCDatetime::toDateTime example
• Example#1403 - MongoDB\BSON\UTCDatetime::toDateTimeImmutable example
• Example#1404 - MongoDB\BSON\UTCDateTime::__toString example
• Example#1405 - MongoDB\BSON\Serializable::bsonSerialize returning an associative array for root document
• Example#1406 - MongoDB\BSON\Serializable::bsonSerialize returning a sequential array for root document
• Example#1407 - MongoDB\BSON\Serializable::bsonSerialize returning an associative array for document field
• Example#1408 - MongoDB\BSON\Serializable::bsonSerialize returning a sequential array for document field
• Example#1409 - MongoDB\BSON\Unserializable::bsonUnserialize example
• Example#1410 - MongoDB\BSON\Int64::__toString example
• Example#1411 - MongoDB\Driver\Exception\WriteException::getWriteResult example
• Example#1412 - Comparing the MySQL APIs
• Example#1413 - Comparing prepared statements
• Example#1414 - Configure commands for using mysqlnd or libmysqlclient
• Example#1415 - Unbuffered query example: mysqli
• Example#1416 - Unbuffered query example: pdo_mysql
• Example#1417 - Problems with setting the character set with SQL
• Example#1418 - Setting the character set example: mysqli
• Example#1419 - Setting the character set example: pdo_mysql
• Example#1420 - 从旧的 mysql 扩展轻松迁移
• Example#1421 - 面向对象和面向过程接口
• Example#1422 - 糟糕的编码风格
• Example#1423 - Special meaning of localhost
• Example#1424 - Setting defaults
• Example#1425 - Executing queries
• Example#1426 - Navigation through buffered results
• Example#1427 - Navigation through unbuffered results
• Example#1428 - Text protocol returns strings by default
• Example#1429 - Native data types with mysqlnd and connection option
• Example#1430 - Prepared statement
• Example#1431 - INSERT prepared once, executed multiple times
• Example#1432 - Less round trips using multi-INSERT SQL
• Example#1433 - Native datatypes
• Example#1434 - Output variable binding
• Example#1435 - Using mysqli_result to fetch results
• Example#1436 - Buffered result set for flexible read out
• Example#1437 - Calling a stored procedure
• Example#1438 - Using session variables
• Example#1439 - Fetching results from stored procedures
• Example#1440 - Stored Procedures and Prepared Statements
• Example#1441 - Stored Procedures and Prepared Statements using bind API
• Example#1442 - Multiple Statements
• Example#1443 - SQL Injection
• Example#1444 - Setting autocommit mode with SQL and through the API
• Example#1445 - Commit and rollback
• Example#1446 - Accessing result set meta data
• Example#1447 - Prepared statements metadata
• Example#1448 - $mysqli->affected_rows example
• Example#1449 - mysqli::autocommit 示例
• Example#1450 - mysqli::begin_transaction example
• Example#1451 - Resetting the connection session
• Example#1452 - If database is null the connection is opened without selecting any default database
• Example#1453 - mysqli::character_set_name 示例
• Example#1454 - mysqli::close 示例
• Example#1455 - $mysqli->connect_errno example
• Example#1456 - $mysqli->connect_error example
• Example#1457 - mysqli::__construct example
• Example#1458 - Extending mysqli class
• Example#1459 - Manual error handling
• Example#1460 - Generating a Trace File
• Example#1461 - $mysqli->errno 示例
• Example#1462 - $mysqli->error example
• Example#1463 - $mysqli->error_list example
• Example#1464 - mysqli::execute_query example
• Example#1465 - $mysqli->field_count example
• Example#1466 - mysqli::get_charset example
• Example#1467 - mysqli_get_client_info
• Example#1468 - mysqli_get_client_version
• Example#1469 - A mysqli_get_connection_stats 示例
• Example#1470 - $mysqli->host_info 示例
• Example#1471 - $mysqli->protocol_version 示例
• Example#1472 - $mysqli->server_info 示例
• Example#1473 - $mysqli->server_version 示例
• Example#1474 - $mysqli->info 示例
• Example#1475 - $mysqli->insert_id 示例
• Example#1476 - mysqli::kill 示例
• Example#1477 - mysqli::multi_query 示例
• Example#1478 - mysqli::ping 示例
• Example#1479 - mysqli_poll 示例
• Example#1480 - mysqli::prepare 示例
• Example#1481 - mysqli::query 示例
• Example#1482 - mysqli::real_connect 示例
• Example#1483 - mysqli::real_escape_string 示例
• Example#1484 - mysqli::select_db 示例
• Example#1485 - mysqli::set_charset 示例
• Example#1486 - $mysqli->sqlstate 示例
• Example#1487 - mysqli::stat 示例
• Example#1488 - $mysqli->thread_id 示例
• Example#1489 - mysqli::use_result example
• Example#1490 - $mysqli->warning_count example
• Example#1491 - mysqli_stmt_affected_rows example
• Example#1492 - mysqli_stmt::bind_param example
• Example#1493 - Using ... to provide arguments
• Example#1494 - 面向对象风格
• Example#1495 - 过程化风格
• Example#1496 - 面向对象风格
• Example#1497 - 过程化风格
• Example#1498 - 面向对象风格
• Example#1499 - 过程化风格
• Example#1500 - 面向对象风格
• Example#1501 - 过程化风格
• Example#1502 - 面向对象风格
• Example#1503 - 过程化风格
• Example#1504 - Execute a prepared statement with bound variables
• Example#1505 - Execute a prepared statement with an array of values
• Example#1506 - 面向对象风格
• Example#1507 - 过程化风格
• Example#1508 - 面向对象风格
• Example#1509 - 过程化风格
• Example#1510 - 面向对象风格
• Example#1511 - 过程化风格
• Example#1512 - 面向对象风格
• Example#1513 - 过程化风格
• Example#1514 - 面向对象风格
• Example#1515 - 过程化风格
• Example#1516 - mysqli_stmt::prepare example
• Example#1517 - 面向对象风格
• Example#1518 - 过程化风格
• Example#1519 - 面向对象风格
• Example#1520 - 面向对象风格
• Example#1521 - 过程化风格
• Example#1522 - 面向对象风格
• Example#1523 - 过程化风格
• Example#1524 - Creation of a mysqli_result object
• Example#1525 - 面向对象风格
• Example#1526 - 过程化风格
• Example#1527 - mysqli::data_seek example
• Example#1528 - Adjusting the result pointer when iterating
• Example#1529 - mysqli_result::fetch_all example
• Example#1530 - mysqli_result::fetch_array example
• Example#1531 - mysqli_result::fetch_assoc example
• Example#1532 - Comparison of mysqli_result iterator and mysqli_result::fetch_assoc usage
• Example#1533 - mysqli_result::fetch_column example
• Example#1534 - 面向对象风格
• Example#1535 - 过程化风格
• Example#1536 - 面向对象风格
• Example#1537 - 过程化风格
• Example#1538 - 面向对象风格
• Example#1539 - 过程化风格
• Example#1540 - mysqli_result::fetch_object example
• Example#1541 - mysqli_result::fetch_row example
• Example#1542 - 面向对象风格
• Example#1543 - 过程化风格
• Example#1544 - 面向对象风格
• Example#1545 - 过程化风格
• Example#1546 - 面向对象风格
• Example#1547 - 过程化风格
• Example#1548 - 面向对象风格
• Example#1549 - 过程化风格
• Example#1550 - 面向对象风格
• Example#1551 - 过程化风格
• Example#1552 - Error reporting except bad index errors
• Example#1553 - A mysqli_get_client_stats 示例
• Example#1554 - Connecting to a MySQL Server
• Example#1555 - Creating a Schema and Collection on the MySQL Server
• Example#1556 - Storing and Retrieving Data
• Example#1557 - Fetching and Iterating Multiple Documents
• Example#1558 - mysql_xdevapi\Expression example
• Example#1559 - URI examples
• Example#1560 - mysql_xdevapi\getSession example
• Example#1561 - mysql_xdevapi\RowResult::getWarnings example
• Example#1562 - mysql_xdevapi\RowResult::getWarningsCount example
• Example#1563 - mysql_xdevapi\Client::__construct example
• Example#1564 - mysql_xdevapi\Collection::add example
• Example#1565 - mysql_xdevapi\Collection::addOrReplaceOne example
• Example#1566 - mysql_xdevapi\Collection::getOne example
• Example#1567 - mysql_xdevapi\Collection::count example
• Example#1568 - mysql_xdevapi\Collection::createIndex example
• Example#1569 - mysql_xdevapi\Collection::dropIndex example
• Example#1570 - mysql_xdevapi\Collection::existsInDatabase example
• Example#1571 - mysql_xdevapi\Collection::find example
• Example#1572 - mysql_xdevapi\Collection::getName example
• Example#1573 - mysql_xdevapi\Collection::getOne example
• Example#1574 - mysql_xdevapi\Collection::getSchema example
• Example#1575 - mysql_xdevapi\Collection::getSession example
• Example#1576 - mysql_xdevapi\Collection::modify example
• Example#1577 - mysql_xdevapi\Collection::remove example
• Example#1578 - mysql_xdevapi\Collection::removeOne example
• Example#1579 - mysql_xdevapi\Collection::replaceOne example
• Example#1580 - mysql_xdevapi\CollectionAdd::__construct example
• Example#1581 - mysql_xdevapi\CollectionAdd::execute example
• Example#1582 - mysql_xdevapi\CollectionFind::bind example
• Example#1583 - CollectionFind example
• Example#1584 - CollectionFind example
• Example#1585 - mysql_xdevapi\CollectionFind::fields example
• Example#1586 - mysql_xdevapi\CollectionFind::groupBy example
• Example#1587 - mysql_xdevapi\CollectionFind::having example
• Example#1588 - mysql_xdevapi\CollectionFind::limit example
• Example#1589 - mysql_xdevapi\CollectionFind::lockExclusive example
• Example#1590 - mysql_xdevapi\CollectionFind::lockShared example
• Example#1591 - mysql_xdevapi\CollectionFind::offset example
• Example#1592 - mysql_xdevapi\CollectionFind::sort example
• Example#1593 - mysql_xdevapi\CollectionModify::arrayAppend example
• Example#1594 - mysql_xdevapi\CollectionModify::arrayInsert example
• Example#1595 - mysql_xdevapi\CollectionModify::bind example
• Example#1596 - mysql_xdevapi\CollectionModify::__construct example
• Example#1597 - mysql_xdevapi\CollectionModify::execute example
• Example#1598 - mysql_xdevapi\CollectionModify::limit example
• Example#1599 - mysql_xdevapi\CollectionModify::patch example
• Example#1600 - mysql_xdevapi\CollectionModify::replace example
• Example#1601 - mysql_xdevapi\CollectionModify::set example
• Example#1602 - mysql_xdevapi\CollectionModify::skip example
• Example#1603 - mysql_xdevapi\CollectionModify::sort example
• Example#1604 - mysql_xdevapi\CollectionModify::unset example
• Example#1605 - mysql_xdevapi\CollectionRemove::bind example
• Example#1606 - mysql_xdevapi\Collection::remove example
• Example#1607 - mysql_xdevapi\CollectionRemove::execute example
• Example#1608 - mysql_xdevapi\CollectionRemove::limit example
• Example#1609 - mysql_xdevapi\CollectionRemove::sort example
• Example#1610 - mysql_xdevapi\ColumnResult::__construct example
• Example#1611 - mysql_xdevapi\ColumnResult::getCharacterSetName example
• Example#1612 - mysql_xdevapi\ColumnResult::getCollationName example
• Example#1613 - mysql_xdevapi\ColumnResult::getColumnLabel example
• Example#1614 - mysql_xdevapi\ColumnResult::getColumnName example
• Example#1615 - mysql_xdevapi\ColumnResult::getFractionalDigits example
• Example#1616 - mysql_xdevapi\ColumnResult::getLength example
• Example#1617 - mysql_xdevapi\ColumnResult::getSchemaName example
• Example#1618 - mysql_xdevapi\ColumnResult::getTableLabel example
• Example#1619 - mysql_xdevapi\ColumnResult::getTableName example
• Example#1620 - mysql_xdevapi\ColumnResult::getType example
• Example#1621 - mysql_xdevapi\ColumnResult::isNumberSigned example
• Example#1622 - mysql_xdevapi\ColumnResult::isPadded example
• Example#1623 - mysql_xdevapi\CrudOperationBindable::bind example
• Example#1624 - mysql_xdevapi\CrudOperationLimitable::limit example
• Example#1625 - mysql_xdevapi\CrudOperationSkippable::skip example
• Example#1626 - mysql_xdevapi\CrudOperationSortable::sort example
• Example#1627 - mysql_xdevapi\DatabaseObject::existsInDatabase example
• Example#1628 - mysql_xdevapi\DatabaseObject::getName example
• Example#1629 - mysql_xdevapi\DatabaseObject::getSession example
• Example#1630 - A DocResult example
• Example#1631 - mysql_xdevapi\DocResult::fetchAll example
• Example#1632 - mysql_xdevapi\DocResult::fetchOne example
• Example#1633 - mysql_xdevapi\DocResult::getWarnings example
• Example#1634 - mysql_xdevapi\DocResult::getWarningsCount example
• Example#1635 - execute() examples
• Example#1636 - mysql_xdevapi\ExecutionStatus::__construct example
• Example#1637 - mysql_xdevapi\Expression::__construct example
• Example#1638 - mysql_xdevapi\Result::__construct example
• Example#1639 - mysql_xdevapi\Result::getAffectedItemsCount example
• Example#1640 - mysql_xdevapi\Result::getAutoIncrementValue example
• Example#1641 - mysql_xdevapi\Result::getGeneratedIds example
• Example#1642 - mysql_xdevapi\RowResult::getWarnings example
• Example#1643 - mysql_xdevapi\RowResult::getWarningsCount example
• Example#1644 - mysql_xdevapi\RowResult::__construct example
• Example#1645 - mysql_xdevapi\RowResult::fetchAll example
• Example#1646 - mysql_xdevapi\RowResult::fetchOne example
• Example#1647 - mysql_xdevapi\RowResult::getColumnsCount example
• Example#1648 - mysql_xdevapi\RowResult::getColumnNames example
• Example#1649 - mysql_xdevapi\RowResult::getColumns example
• Example#1650 - mysql_xdevapi\RowResult::getWarnings example
• Example#1651 - mysql_xdevapi\RowResult::getWarningsCount example
• Example#1652 - mysql_xdevapi\Schema::__construct example
• Example#1653 - mysql_xdevapi\Schema::createCollection example
• Example#1654 - mysql_xdevapi\Schema::createCollection example
• Example#1655 - mysql_xdevapi\Schema::dropCollection example
• Example#1656 - mysql_xdevapi\Schema::existsInDatabase example
• Example#1657 - mysql_xdevapi\Schema::getCollection example
• Example#1658 - mysql_xdevapi\Schema::getCollectionAsTable example
• Example#1659 - mysql_xdevapi\Schema::getCollections example
• Example#1660 - mysql_xdevapi\Schema::getName example
• Example#1661 - mysql_xdevapi\Schema::getSession example
• Example#1662 - mysql_xdevapi\Schema::getTable example
• Example#1663 - mysql_xdevapi\Schema::getTables example
• Example#1664 - mysql_xdevapi\Session::getSchema example
• Example#1665 - mysql_xdevapi\Session::close example
• Example#1666 - mysql_xdevapi\Session::commit example
• Example#1667 - mysql_xdevapi\Session::__construct example
• Example#1668 - mysql_xdevapi\Session::createSchema example
• Example#1669 - mysql_xdevapi\Session::dropSchema example
• Example#1670 - mysql_xdevapi\Session::generateUuid example
• Example#1671 - mysql_xdevapi\Session::getSchema example
• Example#1672 - mysql_xdevapi\Session::getSchema example
• Example#1673 - mysql_xdevapi\Session::getSchemas example
• Example#1674 - mysql_xdevapi\Session::getServerVersion example
• Example#1675 - mysql_xdevapi\Session::listClients example
• Example#1676 - mysql_xdevapi\Session::quoteName example
• Example#1677 - mysql_xdevapi\Session::releaseSavepoint example
• Example#1678 - mysql_xdevapi\Session::rollback example
• Example#1679 - mysql_xdevapi\Session::rollbackTo example
• Example#1680 - mysql_xdevapi\Session::setSavepoint example
• Example#1681 - mysql_xdevapi\Session::sql example
• Example#1682 - mysql_xdevapi\Session::startTransaction example
• Example#1683 - mysql_xdevapi\SqlStatement::bind example
• Example#1684 - mysql_xdevapi\SqlStatement::__construct example
• Example#1685 - mysql_xdevapi\SqlStatement::execute example
• Example#1686 - mysql_xdevapi\SqlStatement::getNextResult example
• Example#1687 - mysql_xdevapi\SqlStatement::getResult example
• Example#1688 - mysql_xdevapi\SqlStatement::hasMoreResults example
• Example#1689 - mysql_xdevapi\SqlStatementResult::__construct example
• Example#1690 - mysql_xdevapi\SqlStatementResult::fetchAll example
• Example#1691 - mysql_xdevapi\SqlStatementResult::fetchOne example
• Example#1692 - mysql_xdevapi\SqlStatementResult::getAffectedItemsCount example
• Example#1693 - mysql_xdevapi\SqlStatementResult::getColumnsCount example
• Example#1694 - mysql_xdevapi\SqlStatementResult::getColumnNames example
• Example#1695 - mysql_xdevapi\SqlStatementResult::getColumns example
• Example#1696 - mysql_xdevapi\SqlStatementResult::getGeneratedIds example
• Example#1697 - mysql_xdevapi\SqlStatementResult::getLastInsertId example
• Example#1698 - mysql_xdevapi\SqlStatementResult::getWarnings example
• Example#1699 - mysql_xdevapi\SqlStatementResult::getWarningsCount example
• Example#1700 - mysql_xdevapi\SqlStatementResult::hasData example
• Example#1701 - mysql_xdevapi\SqlStatementResult::nextResult example
• Example#1702 - mysql_xdevapi\Statement::__construct example
• Example#1703 - mysql_xdevapi\Statement::getNextResult example
• Example#1704 - mysql_xdevapi\Statement::getResult example
• Example#1705 - mysql_xdevapi\Statement::hasMoreResults example
• Example#1706 - mysql_xdevapi\Table::__construct example
• Example#1707 - mysql_xdevapi\Table::count example
• Example#1708 - mysql_xdevapi\Table::delete example
• Example#1709 - mysql_xdevapi\Table::existsInDatabase example
• Example#1710 - mysql_xdevapi\Table::getName example
• Example#1711 - mysql_xdevapi\Table::getSchema example
• Example#1712 - mysql_xdevapi\Table::getSession example
• Example#1713 - mysql_xdevapi\Table::insert example
• Example#1714 - mysql_xdevapi\Table::isView example
• Example#1715 - mysql_xdevapi\Table::count example
• Example#1716 - mysql_xdevapi\Table::update example
• Example#1717 - mysql_xdevapi\TableDelete::bind example
• Example#1718 - mysql_xdevapi\TableDelete::__construct example
• Example#1719 - mysql_xdevapi\TableDelete::execute example
• Example#1720 - mysql_xdevapi\TableDelete::limit example
• Example#1721 - mysql_xdevapi\TableDelete::orderBy example
• Example#1722 - mysql_xdevapi\TableDelete::where example
• Example#1723 - mysql_xdevapi\TableInsert::__construct example
• Example#1724 - mysql_xdevapi\TableInsert::execute example
• Example#1725 - mysql_xdevapi\TableInsert::values example
• Example#1726 - mysql_xdevapi\TableSelect::bind example
• Example#1727 - mysql_xdevapi\TableSelect::__construct example
• Example#1728 - mysql_xdevapi\TableSelect::execute example
• Example#1729 - mysql_xdevapi\TableSelect::groupBy example
• Example#1730 - mysql_xdevapi\TableSelect::having example
• Example#1731 - mysql_xdevapi\TableSelect::limit example
• Example#1732 - mysql_xdevapi\TableSelect::lockExclusive example
• Example#1733 - mysql_xdevapi\TableSelect::lockShared example
• Example#1734 - mysql_xdevapi\TableSelect::offset example
• Example#1735 - mysql_xdevapi\TableSelect::orderBy example
• Example#1736 - mysql_xdevapi\TableSelect::where example
• Example#1737 - mysql_xdevapi\TableUpdate::bind example
• Example#1738 - mysql_xdevapi\TableUpdate::__construct example
• Example#1739 - mysql_xdevapi\TableUpdate::execute example
• Example#1740 - mysql_xdevapi\TableUpdate::limit example
• Example#1741 - mysql_xdevapi\TableUpdate::orderby example
• Example#1742 - mysql_xdevapi\TableUpdate::set example
• Example#1743 - mysql_xdevapi\TableUpdate::where example
• Example#1744 - mysql_xdevapi\Warning::__construct example
• Example#1745 - MySQL 扩展概述范例
• Example#1746 - mysql_affected_rows 例子
• Example#1747 - 使用事务处理的 mysql_affected_rows 例子
• Example#1748 - mysql_client_encoding 示例
• Example#1749 - mysql_close 示例
• Example#1750 - mysql_connect 示例
• Example#1751 - mysql_connect 示例：使用 hostname:port 语法
• Example#1752 - mysql_connect 示例：使用 ":/path/to/socket" 语法
• Example#1753 - 替代 mysql_create_db 示例
• Example#1754 - mysql_data_seek 示例
• Example#1755 - mysql_db_name 示例
• Example#1756 - 替代 mysql_db_query 示例
• Example#1757 - mysql_drop_db alternative example
• Example#1758 - mysql_errno 示例
• Example#1759 - mysql_error 示例
• Example#1760 - mysql_escape_string 示例
• Example#1761 - msql_fetch_array 示例
• Example#1762 - 扩展的 mysql_fetch_assoc 例子
• Example#1763 - mysql_fetch_field
• Example#1764 - mysql_fetch_field example
• Example#1765 - mysql_fetch_lengths 示例
• Example#1766 - mysql_fetch_object example
• Example#1767 - mysql_fetch_object example
• Example#1768 - Fetching one row with mysql_fetch_row
• Example#1769 - mysql_field_flags 示例
• Example#1770 - mysql_field_len 示例
• Example#1771 - mysql_field_name 例子
• Example#1772 - mysql_field_name example
• Example#1773 - mysql_field_table 示例
• Example#1774 - mysql_field_type 例子
• Example#1775 - mysql_field_type example
• Example#1776 - A mysql_free_result example
• Example#1777 - mysql_get_client_info 示例
• Example#1778 - mysql_get_host_info 示例
• Example#1779 - mysql_get_proto_info 示例
• Example#1780 - mysql_get_server_info 示例
• Example#1781 - 相关的 MySQL 语句
• Example#1782 - mysql_insert_id 示例
• Example#1783 - mysql_list_dbs 示例
• Example#1784 - 替代弃用 mysql_list_fields
• Example#1785 - mysql_list_processes 示例
• Example#1786 - mysql_list_tables 例子
• Example#1787 - mysql_num_fields 示例
• Example#1788 - mysql_num_rows 示例
• Example#1789 - mysql_ping 示例
• Example#1790 - 无效的查询
• Example#1791 - 有效的查询
• Example#1792 - 简单 mysql_real_escape_string 示例
• Example#1793 - mysql_real_escape_string requires a connection example
• Example#1794 - An example SQL Injection Attack
• Example#1795 - mysql_result 示例
• Example#1796 - mysql_select_db 例子
• Example#1797 - mysql_select_db example
• Example#1798 - mysql_stat 示例
• Example#1799 - 替代 mysql_stat 示例
• Example#1800 - mysql_tablename example
• Example#1801 - mysql_thread_id 示例
• Example#1802 - Examples of code snippets that cause an explicit close
• Example#1803 - Examples of code snippets that cause an implicit close
• Example#1804 - Usage examples
• Example#1805 - Basic query
• Example#1806 - Inserting with bind variables
• Example#1807 - Binding in the WHERE clause of a query
• Example#1808 - Inserting and fetching a CLOB
• Example#1809 - Using a PL/SQL stored function
• Example#1810 - Using a PL/SQL stored procedure
• Example#1811 - Calling a PL/SQL function that returns a REF CURSOR
• Example#1812 - Registering a TAF callback
• Example#1813 - user_oci8_probes.d for tracing all user-level PHP OCI8 Static Probes with DTrace
• Example#1814 - oci_bind_array_by_name example
• Example#1815 - 使用 oci_bind_by_name 插入数据
• Example#1816 - 一次绑定多次执行
• Example#1817 - 使用 foreach 循环绑定
• Example#1818 - 在 WHERE 子句中绑定
• Example#1819 - 使用 LIKE 子句绑定
• Example#1820 - 与 REGEXP_LIKE 绑定
• Example#1821 - 在 IN 子句中绑定多个值
• Example#1822 - Binding a ROWID returned by a query
• Example#1823 - INSERT 时绑定 ROWID
• Example#1824 - 为 PL/SQL 存储函数绑定
• Example#1825 - 为 PL/SQL 存储过程绑定参数
• Example#1826 - 绑定 CLOB 列
• Example#1827 - 绑定 PL/SQL BOOLEAN
• Example#1828 - oci_client_version example
• Example#1829 - 关闭连接
• Example#1830 - 在关闭所有引用之前不会关闭数据库连接
• Example#1831 - 关闭多次打开的连接
• Example#1832 - 当变量超出作用域时关闭连接
• Example#1833 - oci_commit 示例
• Example#1834 - 使用 Easy Connect 语法的基础 oci_connect
• Example#1835 - 使用 Network Connect 名称的基础 oci_connect
• Example#1836 - 带有显式字符集的 oci_connect
• Example#1837 - 多次调用 oci_connect
• Example#1838 - oci_define_by_name 示例
• Example#1839 - oci_define_by_name 带有区分大小写的列名
• Example#1840 - oci_define_by_name 带有 LOB 列
• Example#1841 - oci_define_by_name 带有显式类型
• Example#1842 - 连接错误后显示 Oracle 错误消息
• Example#1843 - 语法解析错误后显示 Oracle 错误消息
• Example#1844 - 显示 Oracle 错误信息、问题语句、执行错误问题所在位置
• Example#1845 - oci_execute 用于查询
• Example#1846 - oci_execute 未指定模式示例
• Example#1847 - oci_execute 和 OCI_NO_AUTO_COMMIT 示例
• Example#1848 - 具有不同提交模式的 oci_execute 示例
• Example#1849 - oci_execute 与 OCI_DESCRIBE_ONLY 示例
• Example#1850 - oci_fetch 与已定义的变量
• Example#1851 - oci_fetch 和 oci_result
• Example#1852 - oci_fetch_all 示例
• Example#1853 - 带有 OCI_FETCHSTATEMENT_BY_ROW 的 oci_fetch_all 示例
• Example#1854 - 带有 OCI_NUM 的 oci_fetch_all
• Example#1855 - oci_fetch_array with OCI_BOTH
• Example#1856 - oci_fetch_array with OCI_NUM
• Example#1857 - oci_fetch_array with OCI_ASSOC
• Example#1858 - oci_fetch_array with OCI_RETURN_NULLS
• Example#1859 - oci_fetch_array with OCI_RETURN_LOBS
• Example#1860 - oci_fetch_array with case sensitive column names
• Example#1861 - oci_fetch_array with columns having duplicate names
• Example#1862 - oci_fetch_array with DATE columns
• Example#1863 - oci_fetch_array with REF CURSOR
• Example#1864 - Pagination with oci_fetch_array using a LIMIT-like query
• Example#1865 - oci_fetch_array with Oracle Database Implicit Result Sets
• Example#1866 - oci_fetch_assoc Example
• Example#1867 - oci_fetch_object example
• Example#1868 - oci_fetch_object with case sensitive column names
• Example#1869 - oci_fetch_object with LOBs
• Example#1870 - oci_fetch_row Example
• Example#1871 - oci_field_name 示例
• Example#1872 - oci_field_name 示例
• Example#1873 - oci_field_precision 示例
• Example#1874 - oci_field_scale 示例
• Example#1875 - oci_field_size 示例
• Example#1876 - oci_field_type 示例
• Example#1877 - oci_field_type_raw 示例
• Example#1878 - Fetching Implicit Result Sets in a loop
• Example#1879 - Getting child statement handles individually
• Example#1880 - Explicitly setting the Prefetch Count
• Example#1881 - Implicit Result Set example without using oci_get_implicit_resultset
• Example#1882 - oci_new_connect 示例
• Example#1883 - 在调用 Oracle 存储过程中绑定 REF CURSOR
• Example#1884 - oci_new_descriptor 示例
• Example#1885 - oci_new_descriptor 示例
• Example#1886 - oci_num_fields 示例
• Example#1887 - oci_num_rows 示例
• Example#1888 - oci_parse 的 SQL 语句示例
• Example#1889 - oci_parse 的 PL/SQL 语句示例
• Example#1890 - oci_password_change 示例，更改已连接用户的密码
• Example#1891 - oci_password_change 示例之一步更改密码并连接
• Example#1892 - 基础 oci_pconnect 示例，使用 Easy Connect 语法
• Example#1893 - oci_fetch 和 oci_result
• Example#1894 - oci_rollback 示例
• Example#1895 - 回滚到 SAVEPOINT 示例
• Example#1896 - oci_server_version 示例
• Example#1897 - Setting the action
• Example#1898 - Setting the timeout
• Example#1899 - Setting the client identifier to the application user
• Example#1900 - Setting the client information
• Example#1901 - Setting the DBOP
• Example#1902 - Two scripts can use different versions of myfunc() at the same time
• Example#1903 - Setting the module name
• Example#1904 - 更改查询的默认预读取值
• Example#1905 - 更改 REF CURSOR 获取的默认预获取值
• Example#1906 - 将 REF CURSOR 传回 Oracle 时设置读取值
• Example#1907 - Changing the LOB prefetch value for a query
• Example#1908 - oci_statement_type 示例
• Example#1909 - PostgreSQL extension overview example
• Example#1910 - PostgreSQL user defined functions example
• Example#1911 - pg_affected_rows 示例
• Example#1912 - pg_cancel_query 示例
• Example#1913 - pg_client_encoding 示例
• Example#1914 - pg_close 示例
• Example#1915 - 使用 pg_connect
• Example#1916 - pg_connection_busy 示例
• Example#1917 - pg_connection_reset 示例
• Example#1918 - pg_connection_status 示例
• Example#1919 - pg_convert 示例
• Example#1920 - pg_copy_from 示例
• Example#1921 - pg_copy_to 示例
• Example#1922 - pg_dbname 示例
• Example#1923 - pg_delete 示例
• Example#1924 - pg_end_copy 示例
• Example#1925 - pg_escape_bytea 示例
• Example#1926 - pg_escape_identifier example
• Example#1927 - pg_escape_literal example
• Example#1928 - pg_escape_string 示例
• Example#1929 - Using pg_execute
• Example#1930 - PostgreSQL 获取全部
• Example#1931 - pg_fetch_all_columns example
• Example#1932 - pg_fetch_array 示例
• Example#1933 - pg_fetch_assoc 示例
• Example#1934 - pg_fetch_object 示例
• Example#1935 - pg_fetch_result 示例
• Example#1936 - pg_fetch_row 示例
• Example#1937 - pg_field_is_null 示例
• Example#1938 - 获取字段信息
• Example#1939 - 获取字段信息
• Example#1940 - 获取字段的信息
• Example#1941 - 获取字段信息
• Example#1942 - Getting table information about a field
• Example#1943 - 获取字段信息
• Example#1944 - Getting information about fields
• Example#1945 - pg_free_result 示例
• Example#1946 - PostgreSQL NOTIFY 消息
• Example#1947 - PostgreSQL 后端 PID
• Example#1948 - pg_get_result 示例
• Example#1949 - pg_host 示例
• Example#1950 - pg_insert 示例
• Example#1951 - pg_last_error 示例
• Example#1952 - pg_last_notice 示例
• Example#1953 - pg_last_oid 示例
• Example#1954 - pg_lo_close 示例
• Example#1955 - pg_lo_create 示例
• Example#1956 - pg_lo_export 示例
• Example#1957 - pg_lo_import 示例
• Example#1958 - pg_lo_open 示例
• Example#1959 - pg_lo_read 示例
• Example#1960 - pg_lo_read_all 示例
• Example#1961 - pg_lo_seek 示例
• Example#1962 - pg_lo_tell 示例
• Example#1963 - pg_lo_truncate example
• Example#1964 - pg_lo_unlink 示例
• Example#1965 - pg_lo_write 示例
• Example#1966 - 取得表的元数据
• Example#1967 - pg_num_fields 示例
• Example#1968 - pg_num_rows 示例
• Example#1969 - pg_options 示例
• Example#1970 - pg_parameter_status example
• Example#1971 - 使用 pg_pconnect
• Example#1972 - pg_ping 示例
• Example#1973 - pg_port 示例
• Example#1974 - Using pg_prepare
• Example#1975 - pg_put_line 示例
• Example#1976 - pg_query 示例
• Example#1977 - 使用多条语句的 pg_query
• Example#1978 - Using pg_query_params
• Example#1979 - pg_result_error 示例
• Example#1980 - pg_result_error_field example
• Example#1981 - pg_result_memory_size example
• Example#1982 - pg_result_seek 示例
• Example#1983 - pg_result_status 示例
• Example#1984 - pg_select 示例
• Example#1985 - Using pg_send_execute
• Example#1986 - Using pg_send_prepare
• Example#1987 - pg_send_query 示例
• Example#1988 - Using pg_send_query_params
• Example#1989 - pg_set_client_encoding 示例
• Example#1990 - pg_set_error_context_visibility example
• Example#1991 - pg_set_error_verbosity example
• Example#1992 - pg_trace 示例
• Example#1993 - pg_transaction_status example
• Example#1994 - pg_tty 示例
• Example#1995 - pg_unescape_bytea 示例
• Example#1996 - pg_untrace 示例
• Example#1997 - pg_update 示例
• Example#1998 - pg_version example
• Example#1999 - Backup an existing database
• Example#2000 - SQLite3::changes example
• Example#2001 - SQLite3::close example
• Example#2002 - SQLite3::__construct 示例
• Example#2003 - max_length aggregation function example
• Example#2004 - SQLite3::createCollation example
• Example#2005 - SQLite3::createFunction example
• Example#2006 - SQLite3::enableExceptions example
• Example#2007 - SQLite3::exec example
• Example#2008 - SQLite3::loadExtension example
• Example#2009 - SQLite3::open example
• Example#2010 - SQLite3::openBlob example
• Example#2011 - Incrementally writing a BLOB
• Example#2012 - SQLite3::prepare example
• Example#2013 - SQLite3::query example
• Example#2014 - SQLite3::querySingle example
• Example#2015 - SQLite3::setAuthorizer example
• Example#2016 - SQLite3::version example
• Example#2017 - SQLite3Stmt::bindParam Usage
• Example#2018 - SQLite3Stmt::bindValue example
• Example#2019 - Inspecting the expanded SQL
• Example#2020 - sqlsrv_begin_transaction example
• Example#2021 - sqlsrv_cancel example
• Example#2022 - sqlsrv_client_info example
• Example#2023 - sqlsrv_close example
• Example#2024 - sqlsrv_commit example
• Example#2025 - Connect using Windows Authentication.
• Example#2026 - Connect by specifying a user name and password.
• Example#2027 - Connect on a specified port.
• Example#2028 - functionname example
• Example#2029 - sqlsrv_execute example
• Example#2030 - sqlsrv_fetch example
• Example#2031 - Retrieving an associative array.
• Example#2032 - Retrieving a numeric array.
• Example#2033 - sqlsrv_fetch_object example
• Example#2034 - sqlsrv_field_metadata example
• Example#2035 - sqlsrv_free_stmt example
• Example#2036 - sqlsrv_get_field example
• Example#2037 - sqlsrv_has_rows example
• Example#2038 - sqlsrv_next_result example
• Example#2039 - sqlsrv_num_fields example
• Example#2040 - sqlsrv_num_rows example
• Example#2041 - sqlsrv_prepare example
• Example#2042 - sqlsrv_query example
• Example#2043 - sqlsrv_rollback example
• Example#2044 - sqlsrv_rows_affected example
• Example#2045 - sqlsrv_send_stream_data example
• Example#2046 - sqlsrv_server_info example
• Example#2047 - cal_days_in_month 示例
• Example#2048 - cal_from_jd 示例
• Example#2049 - cal_info 示例
• Example#2050 - easter_date 示例
• Example#2051 - 使用带 DateTime 的 easter_date
• Example#2052 - easter_days 示例
• Example#2053 - 历法函数
• Example#2054 - 溢出行为
• Example#2055 - jdtojewish 示例
• Example#2056 - DateTimeImmutable::add/sub 添加包含经过时间的间隔
• Example#2057 - DateTimeImmutable::modify 和 strtotime 递增/减单个组件值
• Example#2058 - 新增/减去时间可能会溢出/下溢日期
• Example#2059 - Creating a mutable date time object
• Example#2060 - Creating a mutable date time object
• Example#2061 - DateTime::modify 示例
• Example#2062 - 增加或者减少月份的时候需要当心
• Example#2063 - 支持所有日期和时间格式
• Example#2064 - DateTime::setTimeZone 示例
• Example#2065 - DateTimeImmutable::add example
• Example#2066 - Further DateTimeImmutable::add examples
• Example#2067 - Beware when adding months
• Example#2068 - DateTimeImmutable::__construct example
• Example#2069 - Intricacies of DateTimeImmutable::__construct
• Example#2070 - Changing the associated timezone
• Example#2071 - Using a relative date/time string
• Example#2072 - DateTimeImmutable::createFromFormat example
• Example#2073 - Using predefined format constants with DateTimeImmutable::createFromFormat
• Example#2074 - Intricacies of DateTimeImmutable::createFromFormat
• Example#2075 - Format string with literal characters
• Example#2076 - Overflow behaviour
• Example#2077 - Overflowing day name behaviour
• Example#2078 - Detecting overflown dates
• Example#2079 - Greedy parsing behaviour
• Example#2080 - Creating an immutable date time object
• Example#2081 - Creating an immutable date time object
• Example#2082 - DateTimeImmutable::getLastErrors example
• Example#2083 - DateTimeImmutable::modify example
• Example#2084 - Beware when adding or subtracting months
• Example#2085 - DateTimeImmutable::setDate example
• Example#2086 - Values exceeding ranges are added to their parent values
• Example#2087 - DateTimeImmutable::setISODate example
• Example#2088 - Values exceeding ranges are added to their parent values
• Example#2089 - Finding the month a week is in
• Example#2090 - DateTimeImmutable::setTime example
• Example#2091 - Values exceeding ranges are added to their parent values
• Example#2092 - DateTimeImmutable::setTimestamp example
• Example#2093 - DateTimeImmutable::setTimeZone example
• Example#2094 - DateTimeImmutable::sub example
• Example#2095 - Further DateTimeImmutable::sub examples
• Example#2096 - Beware when subtracting months
• Example#2097 - DateTimeImmutable::diff 示例
• Example#2098 - DST 转换期间的 DateTimeInterface::diff
• Example#2099 - DateTimeInterface::diff range
• Example#2100 - DateTime 对象比较
• Example#2101 - DateTimeInterface::format 示例
• Example#2102 - 更多示例
• Example#2103 - 格式化时转义字符
• Example#2104 - DateTime::getOffset 示例
• Example#2105 - DateTime::getTimestamp 示例
• Example#2106 - 以毫秒和微秒精度检索时间戳
• Example#2107 - DateTime::getTimezone 示例
• Example#2108 - 创建 DateTimeZone 并附加到 DateTimeImmutable
• Example#2109 - 实例化 DateTimeZone 时捕捉错误
• Example#2110 - DateTimeZone::getLocation 函数的范例：
• Example#2111 - DateTimeZone::getOffset 例子
• Example#2112 - A timezone_transitions_get example
• Example#2113 - A timezone_transitions_get example with timestampBegin set
• Example#2114 - timezone_abbreviations_list 函数的范例：
• Example#2115 - timezone_identifiers_list 范例
• Example#2116 - 列出指定区域的标识符
• Example#2117 - 列出多个区域的标识符
• Example#2118 - 列出单个国家的标识符
• Example#2119 - Constructing and using DateInterval objects
• Example#2120 - DateInterval example
• Example#2121 - Parsing valid date intervals
• Example#2122 - Parsing combinations and negative intervals
• Example#2123 - Parsing special relative date intervals
• Example#2124 - DateInterval example
• Example#2125 - DateInterval and carry over points
• Example#2126 - DateInterval and DateTime::diff with the %a and %d modifiers
• Example#2127 - DatePeriod example
• Example#2128 - DatePeriod example with DatePeriod::EXCLUDE_START_DATE
• Example#2129 - DatePeriod example showing all last Thursdays in a year
• Example#2130 - DatePeriod::createFromISO8601String example
• Example#2131 - DatePeriod::getDateInterval example
• Example#2132 - DatePeriod::getEndDate example
• Example#2133 - DatePeriod::getEndDate without an end date
• Example#2134 - Different values for DatePeriod::getRecurrences
• Example#2135 - DatePeriod::getStartDate example
• Example#2136 - checkdate 例子
• Example#2137 - date 示例
• Example#2138 - date 中的转义字符
• Example#2139 - date 和 mktime 示例
• Example#2140 - date 格式化
• Example#2141 - 获取默认时区
• Example#2142 - 获取时区缩写
• Example#2143 - 获取默认时区
• Example#2144 - 具有全面的 datetime 字符串的 date_parse 示例
• Example#2145 - 带时区缩写信息的 date_parse
• Example#2146 - 带时区标识符信息的 date_parse
• Example#2147 - 带最小字符串的 date_parse
• Example#2148 - 带相对格式的 date_parse
• Example#2149 - date_parse with side-effects
• Example#2150 - date_parse_from_format example
• Example#2151 - date_parse_from_format with warnings example
• Example#2152 - date_parse_from_format with errors example
• Example#2153 - A date_sun_info example
• Example#2154 - Polar night, with some processing
• Example#2155 - Midnight sun (Tromsø, Norway)
• Example#2156 - Calculating length of day (Kyiv)
• Example#2157 - date_sunrise 例子
• Example#2158 - No sunrise
• Example#2159 - date_sunset 例子
• Example#2160 - No sunrise
• Example#2161 - getdate 例子
• Example#2162 - gettimeofday 例子
• Example#2163 - gmdate 示例
• Example#2164 - gmmktime 基础示例
• Example#2165 - gmstrftime 例子
• Example#2166 - idate example
• Example#2167 - localtime 例子
• Example#2168 - 计时脚本执行时间
• Example#2169 - microtime 和 REQUEST_TIME_FLOAT
• Example#2170 - 基本例子
• Example#2171 - mktime 例子
• Example#2172 - 下个月的最后一天
• Example#2173 - strftime 区域的例子
• Example#2174 - ISO 8601:1988 week number example
• Example#2175 - %e 修改器跨平台兼容的例子
• Example#2176 - 显示所有已知和未知的格式
• Example#2177 - strptime 例子
• Example#2178 - strtotime 例子
• Example#2179 - 失败检查
• Example#2180 - time 例子
• Example#2181 - A timezone_name_from_abbr example
• Example#2182 - 获取 timezonedb 版本
• Example#2183 - Measure several code blocks execution and get the total
• Example#2184 - 关闭文件描述符
• Example#2185 - 设置并清除锁
• Example#2186 - 打开文件描述符
• Example#2187 - 在文件中定位
• Example#2188 - 在串口上设置波特率
• Example#2189 - chdir 例子
• Example#2190 - chroot example
• Example#2191 - closedir 例子
• Example#2192 - dir 示例
• Example#2193 - getcwd 例子
• Example#2194 - opendir 示例
• Example#2195 - 列出目录中的所有文件
• Example#2196 - 列出当前目录的所有文件并去掉 . 和 ..
• Example#2197 - 简单的 scandir 示例
• Example#2198 - finfo_buffer 示例
• Example#2199 - finfo_file 示例
• Example#2200 - 面向对象风格
• Example#2201 - 过程化风格
• Example#2202 - mime_content_type 示例
• Example#2203 - basename 例子
• Example#2204 - 改变文件所属的组
• Example#2205 - 简单的 chown 用法
• Example#2206 - clearstatcache 例子
• Example#2207 - copy 例子
• Example#2208 - dirname 例子
• Example#2209 - disk_free_space 例子
• Example#2210 - disk_total_space 例子
• Example#2211 - 一个简单 fclose 例子
• Example#2212 - fdatasync 示例
• Example#2213 - 处理 feof 的超时
• Example#2214 - 使用无效文件指针的 feof 例子
• Example#2215 - File write example using fflush
• Example#2216 - 一个 fgetc 例子
• Example#2217 - 读取并显示 CSV 文件的整个内容
• Example#2218 - 逐行读取文件
• Example#2219 - 一行行读取一个 PHP 文件
• Example#2220 - file 例子
• Example#2221 - 测试一个文件是否存在
• Example#2222 - 获取并输出网站首页 HTML 源码
• Example#2223 - 在 include_path 里搜索
• Example#2224 - 读取文件一小节
• Example#2225 - 使用 stream 上下文（context）
• Example#2226 - 简单用法示例
• Example#2227 - Using flags
• Example#2228 - fileatime 例子
• Example#2229 - filectime 例子
• Example#2230 - 查找文件所在的组
• Example#2231 - 将某个文件和当前文件的 inode 进行对比
• Example#2232 - filemtime 例子
• Example#2233 - 找到文件的所有者
• Example#2234 - 以八进制的形式显示文件的权限
• Example#2235 - 输出全部权限
• Example#2236 - filesize 例子
• Example#2237 - filetype 例子
• Example#2238 - flock 例子
• Example#2239 - flock 使用 LOCK_NB 选项
• Example#2240 - 用 shell 中的通配符模式匹配来检查颜色名称
• Example#2241 - fopen 例子
• Example#2242 - 对二进制文件使用 fpassthru
• Example#2243 - fputcsv 例子
• Example#2244 - 一个简单的 fread 例子
• Example#2245 - Binary fread example
• Example#2246 - Remote fread examples
• Example#2247 - fscanf 例子
• Example#2248 - users.txt 的内容
• Example#2249 - fseek 例子
• Example#2250 - fstat 例子
• Example#2251 - fsync 示例
• Example#2252 - ftell 例子
• Example#2253 - 文件截取示例
• Example#2254 - 简单的 fwrite 示例
• Example#2255 - 怎样用 glob 方便地替代 opendir 和相关函数
• Example#2256 - is_dir 例子
• Example#2257 - is_executable 例子
• Example#2258 - is_file 例子
• Example#2259 - 创建并确认一个文件是否为符号连接
• Example#2260 - is_readable 例子
• Example#2261 - is_uploaded_file 例子
• Example#2262 - is_writable 例子
• Example#2263 - 更改符号链接的所有组
• Example#2264 - Changing the owner of a symbolic link
• Example#2265 - 创建简单的硬链接
• Example#2266 - linkinfo 例子
• Example#2267 - stat 和 lstat 的对照
• Example#2268 - mkdir 例子
• Example#2269 - 通过 recursive 参数使用 mkdir
• Example#2270 - Uploading multiple files
• Example#2271 - sample.ini 的内容
• Example#2272 - parse_ini_file 例子
• Example#2273 - parse_ini_file 格式化 php.ini 文件
• Example#2274 - 内插值
• Example#2275 - 转义字符
• Example#2276 - pathinfo 例子
• Example#2277 - pathinfo 对比空扩展名和无扩展名之间区别的示例
• Example#2278 - pathinfo 形如 .file 的示例
• Example#2279 - pathinfo 示例和解除数组引用
• Example#2280 - pclose 例子
• Example#2281 - popen 例子
• Example#2282 - popen 例子
• Example#2283 - 使用 readfile 强制下载
• Example#2284 - readlink 示例
• Example#2285 - realpath 例子
• Example#2286 - Windows 上的 realpath
• Example#2287 - realpath_cache_get 示例
• Example#2288 - realpath_cache_size 示例
• Example#2289 - rename 例子
• Example#2290 - rewind overwriting example
• Example#2291 - rmdir 例子
• Example#2292 - stat 例子
• Example#2293 - Using stat information together with touch
• Example#2294 - 创建一个符号连接
• Example#2295 - tempnam 例子
• Example#2296 - tmpfile 例子
• Example#2297 - touch 例子
• Example#2298 - 使用 mtime 参数的 touch
• Example#2299 - umask 例子
• Example#2300 - 基本的 unlink 用法
• Example#2301 - inotify 使用示例
• Example#2302 - Checks if system administrator has signed the file
• Example#2303 - Prints names of all extended attributes of file
• Example#2304 - Removes all extended attributes of a file
• Example#2305 - Sets extended attributes on .wav file
• Example#2306 - xattr_supported example
• Example#2307 - xdiff_file_bdiff example
• Example#2308 - xdiff_file_bdiff_size example
• Example#2309 - xdiff_file_bpatch example
• Example#2310 - xdiff_file_diff example
• Example#2311 - xdiff_file_diff_binary example
• Example#2312 - xdiff_file_merge3 example
• Example#2313 - xdiff_file_patch example
• Example#2314 - Patch reversing example
• Example#2315 - xdiff_file_patch_binary example
• Example#2316 - xdiff_file_rabdiff example
• Example#2317 - xdiff_string_bdiff_size example
• Example#2318 - xdiff_string_diff example
• Example#2319 - xdiff_string_patch example
• Example#2320 - Enchant Usage Example
• Example#2321 - List the backends provided by the given broker
• Example#2322 - A enchant_broker_dict_exists example
• Example#2323 - List all available dictionaries for one broker
• Example#2324 - A enchant_broker_request_dict example
• Example#2325 - Adding a word to a PWL
• Example#2326 - A enchant_dict_describe example
• Example#2327 - A enchant_dict_quick_check example
• Example#2328 - A enchant_dict_suggest example
• Example#2329 - Usage example.
• Example#2330 - Using Gender\Gender::country
• Example#2331 - bindtextdomain example
• Example#2332 - gettext-check
• Example#2333 - ngettext example
• Example#2334 - iconv 示例
• Example#2335 - iconv_get_encoding 示例
• Example#2336 - iconv_mime_decode实例
• Example#2337 - iconv_mime_decode_headers 示例
• Example#2338 - iconv_mime_encode example
• Example#2339 - iconv_set_encoding 示例
• Example#2340 - ob_iconv_handler 例子：
• Example#2341 - Example of using the procedural API
• Example#2342 - Example of using the object-oriented API
• Example#2343 - FRENCH_COLLATION rules
• Example#2344 - ALTERNATE_HANDLING rules
• Example#2345 - CASE_FIRST rules
• Example#2346 - CASE_LEVEL rules
• Example#2347 - collator_asort example
• Example#2348 - collator_compare example
• Example#2349 - Comparing strings without diacritics or case-sensitivity
• Example#2350 - Collator::__construct example
• Example#2351 - collator_create example
• Example#2352 - collator_get_attribute example
• Example#2353 - collator_get_error_code example
• Example#2354 - collator_get_error_message example
• Example#2355 - collator_get_locale example
• Example#2356 - collator_get_sort_keyexample
• Example#2357 - collator_get_strength example
• Example#2358 - collator_set_attribute example
• Example#2359 - collator_set_strength example
• Example#2360 - collator_sort example
• Example#2361 - collator_sort_with_sort_keys example
• Example#2362 - numfmt_create example
• Example#2363 - NumberFormatter::create example
• Example#2364 - numfmt_format example
• Example#2365 - OO example
• Example#2366 - numfmt_format_currency example
• Example#2367 - OO example
• Example#2368 - numfmt_get_attribute example
• Example#2369 - OO example
• Example#2370 - numfmt_get_error_code example
• Example#2371 - OO example
• Example#2372 - numfmt_get_error_message example
• Example#2373 - OO example
• Example#2374 - numfmt_get_locale example
• Example#2375 - numfmt_get_pattern example
• Example#2376 - OO example
• Example#2377 - numfmt_get_symbol example
• Example#2378 - OO example
• Example#2379 - numfmt_get_text_attribute example
• Example#2380 - OO example
• Example#2381 - numfmt_parse example
• Example#2382 - OO example
• Example#2383 - numfmt_parse_currency example
• Example#2384 - OO example
• Example#2385 - numfmt_set_attribute example
• Example#2386 - OO example
• Example#2387 - numfmt_set_pattern example
• Example#2388 - OO example
• Example#2389 - numfmt_set_symbol example
• Example#2390 - OO example
• Example#2391 - numfmt_set_text_attribute example
• Example#2392 - OO example
• Example#2393 - locale_accept_from_http example
• Example#2394 - OO example
• Example#2395 - locale_compose example
• Example#2396 - OO example
• Example#2397 - Subtag limits
• Example#2398 - locale_filter_matches example
• Example#2399 - OO example
• Example#2400 - locale_get_all_variants example
• Example#2401 - OO example
• Example#2402 - locale_get_default example
• Example#2403 - OO example
• Example#2404 - locale_get_display_language example
• Example#2405 - OO example
• Example#2406 - locale_get_display_name example
• Example#2407 - OO example
• Example#2408 - locale_get_display_region example
• Example#2409 - OO example
• Example#2410 - locale_get_display_script example
• Example#2411 - OO example
• Example#2412 - locale_get_display_variant example
• Example#2413 - OO example
• Example#2414 - locale_get_keywords example
• Example#2415 - OO example
• Example#2416 - locale_get_primary_language example
• Example#2417 - OO example
• Example#2418 - locale_get_region example
• Example#2419 - OO example
• Example#2420 - locale_get_script example
• Example#2421 - OO example
• Example#2422 - locale_lookup example
• Example#2423 - OO example
• Example#2424 - locale_parse example
• Example#2425 - OO example
• Example#2426 - locale_set_default example
• Example#2427 - OO example
• Example#2428 - Normalizer::getRawDecomposition example
• Example#2429 - normalizer_is_normalized example
• Example#2430 - OO example
• Example#2431 - normalizer_normalize example
• Example#2432 - OO example
• Example#2433 - msgfmt_create example
• Example#2434 - OO example
• Example#2435 - msgfmt_format example
• Example#2436 - OO example
• Example#2437 - msgfmt_format_message example
• Example#2438 - OO example
• Example#2439 - Instructing ICU to format currency with common and with narrow currency symbol
• Example#2440 - msgfmt_get_error_message example
• Example#2441 - OO example
• Example#2442 - msgfmt_get_locale example
• Example#2443 - OO example
• Example#2444 - msgfmt_get_pattern example
• Example#2445 - OO example
• Example#2446 - msgfmt_parse example
• Example#2447 - OO example
• Example#2448 - msgfmt_parse_message example
• Example#2449 - OO example
• Example#2450 - msgfmt_set_pattern example
• Example#2451 - OO example
• Example#2452 - IntlCalendar::add
• Example#2453 - IntlCalendar::after
• Example#2454 - IntlCalendar::clear examples
• Example#2455 - IntlCalendar::createInstance
• Example#2456 - IntlCalendar::equals
• Example#2457 - IntlCalendar::fieldDifference
• Example#2458 - IntlCalendar::fromDateTime
• Example#2459 - IntlCalendar::get
• Example#2460 - IntlCalendar::getActualMaximum
• Example#2461 - IntlCalendar::getAvailableLocales
• Example#2462 - IntlCalendar::getDayOfWeekType
• Example#2463 - IntlCalendar::getErrorCode and IntlCalendar::getErrorMessage
• Example#2464 - IntlCalendar::getErrorMessage
• Example#2465 - IntlCalendar::getFirstDayOfWeek
• Example#2466 - IntlCalendar::getKeyworkValuesForLocale
• Example#2467 - Maxima examples
• Example#2468 - IntlCalendar::getLocale
• Example#2469 - IntlCalendar::getMinimalDaysInFirstWeek
• Example#2470 - IntlCalendar::getNow
• Example#2471 - IntlCalendar::getRepeatedWallTimeOption
• Example#2472 - IntlCalendar::getSkippedWallTimeOption
• Example#2473 - IntlCalendar::getTime
• Example#2474 - IntlCalendar::getTimeZone
• Example#2475 - IntlCalendar::getType
• Example#2476 - IntlCalendar::inDaylightTime
• Example#2477 - IntlCalendar::isEquivalentTo
• Example#2478 - IntlCalendar::isLenient
• Example#2479 - IntlCalendar::isWeekend
• Example#2480 - IntlCalendar::roll
• Example#2481 - IntlCalendar::set
• Example#2482 - IntlCalendar::setDate example
• Example#2483 - IntlCalendar::setDateTime example
• Example#2484 - IntlCalendar::setFirstDayOfWeek
• Example#2485 - IntlCalendar::setTime
• Example#2486 - IntlCalendar::setTimeZone
• Example#2487 - IntlCalendar::toDateTime
• Example#2488 - IntlGregorianCalendar::createFromDate example
• Example#2489 - IntlGregorianCalendar::createFromDateTime example
• Example#2490 - datefmt_create example
• Example#2491 - OO example
• Example#2492 - Example of invalid locale handling
• Example#2493 - datefmt_format example
• Example#2494 - OO example
• Example#2495 - With IntlCalendar object
• Example#2496 - IntlDateFormatter::formatObject examples
• Example#2497 - datefmt_get_calendar example
• Example#2498 - OO example
• Example#2499 - Example of invalid locale handling
• Example#2500 - datefmt_get_datetype example
• Example#2501 - OO example
• Example#2502 - datefmt_get_error_code example
• Example#2503 - OO example
• Example#2504 - datefmt_get_error_message example
• Example#2505 - OO example
• Example#2506 - datefmt_get_locale example
• Example#2507 - OO example
• Example#2508 - datefmt_get_pattern example
• Example#2509 - OO example
• Example#2510 - datefmt_get_timetype example
• Example#2511 - OO example
• Example#2512 - datefmt_get_timezone_id example
• Example#2513 - OO example
• Example#2514 - IntlDateFormatter::getCalendarObject example
• Example#2515 - IntlDateFormatter::getTimeZone examples
• Example#2516 - datefmt_is_lenient example
• Example#2517 - OO example
• Example#2518 - datefmt_localtime example
• Example#2519 - OO example
• Example#2520 - OO example
• Example#2521 - datefmt_parse example
• Example#2522 - datefmt_set_calendar example
• Example#2523 - OO example
• Example#2524 - Example with IntlCalendar argument
• Example#2525 - datefmt_set_lenient example
• Example#2526 - OO example
• Example#2527 - datefmt_set_pattern example
• Example#2528 - OO example
• Example#2529 - IntlDateFormatter::setTimeZone examples
• Example#2530 - resourcebundle_count example
• Example#2531 - OO example
• Example#2532 - resourcebundle_create example
• Example#2533 - ResourceBundle::create example
• Example#2534 - resourcebundle_get example
• Example#2535 - OO example
• Example#2536 - resourcebundle_get_error_code example
• Example#2537 - OO example
• Example#2538 - resourcebundle_get_error_message example
• Example#2539 - OO example
• Example#2540 - resourcebundle_locales example
• Example#2541 - OO example
• Example#2542 - Spoofchecker::areConfusable example
• Example#2543 - Spoofchecker::isSuspicious example
• Example#2544 - Retrieving the registered transliterator IDs
• Example#2545 - Converting escaped UTF-16 code units
• Example#2546 - IntlDatePatternGenerator::getBestPattern example
• Example#2547 - Converting from UTF-8 to UTF-16 and back
• Example#2548 - Invalid characters in input
• Example#2549 - Characters which cannot be encoded
• Example#2550 - grapheme_extract example
• Example#2551 - grapheme_stripos example
• Example#2552 - grapheme_stristr example
• Example#2553 - grapheme_strlen example
• Example#2554 - grapheme_strpos example
• Example#2555 - grapheme_strripos example
• Example#2556 - grapheme_strrpos example
• Example#2557 - grapheme_strstr example
• Example#2558 - grapheme_substr example
• Example#2559 - idn_to_ascii 示例
• Example#2560 - idn_to_utf8 示例
• Example#2561 - Testing different code points
• Example#2562 - Testing different code points
• Example#2563 - Testing different code points
• Example#2564 - Testing different code points
• Example#2565 - Testing different code points
• Example#2566 - Testing different code points
• Example#2567 - Testing different code points
• Example#2568 - Testing different code points
• Example#2569 - Testing different code points
• Example#2570 - Enumerating over a sample range of code points
• Example#2571 - Enumerating over a sample range of code points
• Example#2572 - Testing different code points
• Example#2573 - Testing different code points
• Example#2574 - Testing different code points
• Example#2575 - Testing different code points
• Example#2576 - Testing different code points
• Example#2577 - Testing different properties
• Example#2578 - Testing different properties
• Example#2579 - Testing different properties
• Example#2580 - Testing different code points
• Example#2581 - Testing different properties
• Example#2582 - Testing different properties
• Example#2583 - Testing different properties
• Example#2584 - Testing different properties
• Example#2585 - Testing different properties
• Example#2586 - Testing different properties
• Example#2587 - Testing different code points
• Example#2588 - Testing different code points
• Example#2589 - Testing different code points
• Example#2590 - Testing different code points
• Example#2591 - Testing different code points
• Example#2592 - Testing different code points
• Example#2593 - Testing different code points
• Example#2594 - Testing different code points
• Example#2595 - Testing different code points
• Example#2596 - Testing different code points
• Example#2597 - Testing different code points
• Example#2598 - Testing different code points
• Example#2599 - Testing different code points
• Example#2600 - Testing different code points
• Example#2601 - Testing different code points
• Example#2602 - Testing different code points
• Example#2603 - Testing different code points
• Example#2604 - Testing different code points
• Example#2605 - Testing different code points
• Example#2606 - Testing different code points
• Example#2607 - Testing different code points
• Example#2608 - Testing different code points
• Example#2609 - Testing different code points
• Example#2610 - Testing different code points
• Example#2611 - Testing different code points
• Example#2612 - Testing different code points
• Example#2613 - Testing different code points
• Example#2614 - Testing different code points
• Example#2615 - Testing different code points
• Example#2616 - Testing different code points
• Example#2617 - Testing different code points
• Example#2618 - Testing different code points
• Example#2619 - intl_error_name example
• Example#2620 - intl_get_error_code example
• Example#2621 - intl_get_error_message example
• Example#2622 - intl_is_failure example
• Example#2623 - php.ini 设置例子
• Example#2624 - php.ini 里 EUC-JP 用户的设置
• Example#2625 - php.ini 里 SJIS 用户的设置
• Example#2626 - 在 php.ini 中禁用 HTTP 输入转换
• Example#2627 - php.ini 设置例子
• Example#2628 - 脚本例子
• Example#2629 - Testing different code points
• Example#2630 - mb_convert_case 示例
• Example#2631 - 非拉丁 UTF-8 文本的 mb_convert_case 示例
• Example#2632 - mb_convert_encoding 示例
• Example#2633 - mb_convert_kana example
• Example#2634 - mb_convert_variables 示例
• Example#2635 - map 示例
• Example#2636 - map 示例，转义 JavaScript 字符串
• Example#2637 - mb_detect_encoding 示例
• Example#2638 - strict 参数的影响
• Example#2639 - 匹配多个编码时顺序的影响
• Example#2640 - mb_detect_order 示例
• Example#2641 - 案例展示了无效的检测顺序
• Example#2642 - mb_encode_mimeheader 例子
• Example#2643 - map example
• Example#2644 - mb_encode_numericentity example
• Example#2645 - mb_encoding_aliases example
• Example#2646 - mb_ereg_replace_callback example
• Example#2647 - mb_ereg_replace_callback using anonymous function
• Example#2648 - mb_internal_encoding 示例
• Example#2649 - mb_list_encodings 例子
• Example#2650 - 一个基础的 mb_ord 示例
• Example#2651 - mb_output_handler 示例
• Example#2652 - mb_preferred_mime_name 示例
• Example#2653 - mb_str_pad example
• Example#2654 - mb_strimwidth 示例
• Example#2655 - mb_strtolower 示例
• Example#2656 - 非拉丁 UTF-8 文本的 mb_strtolower 例子
• Example#2657 - mb_strtoupper 示例
• Example#2658 - 非拉丁 UTF-8 文本的 mb_strtoupper 示例
• Example#2659 - mb_strwidth 示例
• Example#2660 - mb_substitute_character 示例
• Example#2661 - mb_substr_count 示例
• Example#2662 - pspell_add_to_personal
• Example#2663 - pspell_check Example
• Example#2664 - pspell_add_to_personal Example
• Example#2665 - pspell_config_create
• Example#2666 - pspell_config_ignore
• Example#2667 - pspell_config_mode Example
• Example#2668 - pspell_config_personal
• Example#2669 - pspell_config_repl
• Example#2670 - pspell_config_runtogether
• Example#2671 - pspell_new
• Example#2672 - pspell_new_config
• Example#2673 - pspell_new_personal
• Example#2674 - pspell_add_to_personal
• Example#2675 - pspell_store_replacement
• Example#2676 - pspell_suggest example
• Example#2677 - Basic recode_file example
• Example#2678 - Basic recode_string example
• Example#2679 - exif_imagetype 示例
• Example#2680 - exif_read_data 例子
• Example#2681 - exif_read_data with streams available as of PHP 7.2.0
• Example#2682 - exif_tagname 函数示例
• Example#2683 - exif_thumbnail 示例
• Example#2684 - 使用 PHP 创建 PNG 图像
• Example#2685 - 使用 Alpha 通道为图像加水印
• Example#2686 - 使用 imagecopymerge 函数创建半透明水印
• Example#2687 - 使用 gd_info
• Example#2688 - getimagesize 和 MIME 类型
• Example#2689 - getimagesize 示例
• Example#2690 - getimagesize (URL)
• Example#2691 - getimagesize() 返回 IPTC
• Example#2692 - getimagesizefromstring 示例
• Example#2693 - image_type_to_extension 示例
• Example#2694 - image_type_to_mime_type 示例
• Example#2695 - image2wbmp 示例
• Example#2696 - imageaffinematrixconcat example
• Example#2697 - imageaffinematrixget example
• Example#2698 - imagealphablending 用法示例
• Example#2699 - 比较两条线，一条开启了抗锯齿
• Example#2700 - 使用 imagearc 画圆
• Example#2701 - Saving a BMP file
• Example#2702 - imagechar 示例
• Example#2703 - imagecharup 示例
• Example#2704 - imagecolorallocate 示例
• Example#2705 - 使用 imagecolorallocatealpha 的示例
• Example#2706 - Convert typical alpha values for use with imagecolorallocatealpha
• Example#2707 - 访问不同的 RGB 值
• Example#2708 - 使用 imagecolorsforindex 获取可读的 RGB 值
• Example#2709 - 在图像中搜索一组颜色
• Example#2710 - 在图像中搜索一组颜色
• Example#2711 - 使用 imagecolorclosesthwb 示例
• Example#2712 - 使用 imagecolordeallocate
• Example#2713 - 从 GD logo 中获取颜色
• Example#2714 - 从 GD logo 中获取颜色
• Example#2715 - imagecolormatch 示例
• Example#2716 - 使用 imagecoloresolve 从图像中获取颜色
• Example#2717 - 使用 imagecoloresolvealpha 从图像中获取颜色
• Example#2718 - imagecolorset 示例
• Example#2719 - imagecolorsforindex 示例
• Example#2720 - 使用 imagecolorstotal 获取图像中的颜色总数
• Example#2721 - imagecolortransparent 示例
• Example#2722 - Embossing the PHP.net logo
• Example#2723 - Gaussian blur
• Example#2724 - 裁剪 PHP.net logo
• Example#2725 - 使用 75% 透明度合并 PHP.net logo 的两个副本
• Example#2726 - imagecopymergegray 用法
• Example#2727 - 简单的示例
• Example#2728 - 按比例对图像重新采样
• Example#2729 - 缩放图像
• Example#2730 - 创建新的 GD 图像流并输出图像。
• Example#2731 - Convert an BMP image to a PNG image using imagecreatefrombmp
• Example#2732 - imagecreatefromgd 示例
• Example#2733 - imagecreatefromgd2 示例
• Example#2734 - imagecreatefromgd2part 示例
• Example#2735 - 在加载 GIF 期间处理错误的示例
• Example#2736 - 在加载 JPEG 期间处理错误的示例
• Example#2737 - 在加载 PNG 期间处理错误的示例
• Example#2738 - imagecreatefromstring 示例
• Example#2739 - 在加载 WBMP 期间处理错误的示例
• Example#2740 - 使用 imagecreatefromwebp 转换 WebP 图像为 jpeg 图像
• Example#2741 - 使用 imagecreatefromxbm 转换 XBM 图像为 png 图像
• Example#2742 - 使用 imagecreatefromxpm 创建图像实例
• Example#2743 - 新建 GD 图像流并输出图像。
• Example#2744 - imagecrop example
• Example#2745 - Proper handling of auto-cropping
• Example#2746 - imagedashedline 示例
• Example#2747 - 替代 imagedashedline
• Example#2748 - PHP 8.0.0 前使用 imagedestroy
• Example#2749 - imageellipse 示例
• Example#2750 - imagefill 示例
• Example#2751 - 创建 3D 外观的饼图
• Example#2752 - imagefilledellipse 示例
• Example#2753 - imagefilledpolygon 示例
• Example#2754 - imagefilledrectangle 用法
• Example#2755 - 用颜色填充椭圆
• Example#2756 - imagefilter 灰度示例
• Example#2757 - imagefilter 亮度示例
• Example#2758 - imagefilter 着色示例
• Example#2759 - imagefilter 反例
• Example#2760 - imagefilter 像素化示例
• Example#2761 - imagefilter 散射示例
• Example#2762 - Flips an image vertically
• Example#2763 - Flips the image horizontally
• Example#2764 - 在内置字体上使用 imagefontheight
• Example#2765 - 将 imagefontheight 与 imageloadfont 一起使用
• Example#2766 - 在内置字体上使用 imagefontwidth
• Example#2767 - 将 imagefontwidth 与 imageloadfont 一起使用
• Example#2768 - imageftbbox 示例
• Example#2769 - imagefttext 示例
• Example#2770 - imagegammacorrect 用法
• Example#2771 - 输出 GD 图像
• Example#2772 - 保存 GD 图像
• Example#2773 - 输出 GD2 图像
• Example#2774 - 保存 GD2 图像
• Example#2775 - imagegetclip example
• Example#2776 - 使用 imagegif 输出图像
• Example#2777 - 使用 imagegif 将 PNG 图像转换成 GIF
• Example#2778 - imagegrabscreen example
• Example#2779 - imagegrabwindow example
• Example#2780 - 使用 imageinterlace 打开隔行扫描
• Example#2781 - 使用 imageistruecolor 简单检测真彩色实例
• Example#2782 - 输出 JPEG 图像到浏览器
• Example#2783 - 保存 JPEG 图像到文件
• Example#2784 - 以 75% 的图像质量输出图像到浏览器
• Example#2785 - imagelayereffect 示例
• Example#2786 - 绘制粗线
• Example#2787 - imageloadfont 用法示例
• Example#2788 - imageopenpolygon example
• Example#2789 - imagepalettecopy 示例
• Example#2790 - Converts any image object to true color
• Example#2791 - imagepolygon 示例
• Example#2792 - imagerectangle 的简单示例
• Example#2793 - Setting and getting the resolution of an image
• Example#2794 - 图像旋转 180 度
• Example#2795 - 基础 imagesavealpha 用法
• Example#2796 - imagesetbrush 示例
• Example#2797 - imagesetinterpolation example
• Example#2798 - imagesetpixel 示例
• Example#2799 - imagesetstyle 例子
• Example#2800 - imagesetthickness 示例
• Example#2801 - imagesettile 示例
• Example#2802 - imagestring 示例
• Example#2803 - imagestringup 示例
• Example#2804 - 使用 imagesx
• Example#2805 - 使用 imagesy
• Example#2806 - 将真彩色图像转换为基于调色板的图像
• Example#2807 - imagettfbbox 示例
• Example#2808 - imagettftext 示例
• Example#2809 - 检测 PNG 支持
• Example#2810 - 输出 WBMP 图像
• Example#2811 - 保存 WBMP 图像
• Example#2812 - 使用不同的前景色输出图像
• Example#2813 - 保存为 WebP 图像文件
• Example#2814 - 保存 XBM 文件
• Example#2815 - 以不同前景色保存一个 XBM 文件
• Example#2816 - 嵌入 IPTC 数据到 JPEG
• Example#2817 - iptcparse() 与 getimagesize 一起使用
• Example#2818 - jpeg2wbmp 示例
• Example#2819 - png2wbmp 示例
• Example#2820 - Gmagick Example
• Example#2821 - Gmagick::despeckleimage example
• Example#2822 - Gmagick::setCompressionQuality
• Example#2823 - Creating a thumbnail in Imagick
• Example#2824 - Make a thumbnail of all JPG files in a directory
• Example#2825 - Creating a reflection of an image
• Example#2826 - Filling text with gradient
• Example#2827 - Read in GIF image and resize all frames
• Example#2828 - Create a PHP logo
• Example#2829 - Using Imagick::adaptiveBlurImage:
• Example#2830 - Using Imagick::adaptiveResizeImage
• Example#2831 - A Imagick::adaptiveSharpenImage example
• Example#2832 - Imagick::adaptiveThresholdImage
• Example#2833 - Imagick::addNoiseImage
• Example#2834 - Imagick::affineTransformImage
• Example#2835 - Using Imagick::annotateImage:
• Example#2836 - Imagick::appendImages example
• Example#2837 - Imagick::autoLevelImage
• Example#2838 - Imagick::blackThresholdImage
• Example#2839 - Imagick::blueShiftImage
• Example#2840 - Using Imagick::blurImage:
• Example#2841 - Imagick::borderImage
• Example#2842 - Imagick::brightnessContrastImage
• Example#2843 - Imagick::charcoalImage
• Example#2844 - Using Imagick::chopImage:
• Example#2845 - Imagick object cloning in different versions of imagick
• Example#2846 - Using Imagick::clutImage:
• Example#2847 - Imagick::colorizeImage
• Example#2848 - Imagick::colorMatrixImage
• Example#2849 - Using Imagick::commentImage:
• Example#2850 - Using Imagick::compareImageLayers
• Example#2851 - Using Imagick::compareImages:
• Example#2852 - 使用 Imagick::compositeImage:
• Example#2853 - Imagick::contrastImage
• Example#2854 - Imagick::convolveImage
• Example#2855 - Imagick::cropImage
• Example#2856 - Imagick::deskewImage
• Example#2857 - Imagick::despeckleImage
• Example#2858 - Using Imagick::distortImage:
• Example#2859 - Imagick::edgeImage
• Example#2860 - Imagick::embossImage
• Example#2861 - Imagick::enhanceImage
• Example#2862 - Imagick::equalizeImage
• Example#2863 - Using Imagick::evaluateImage
• Example#2864 - Using Imagick::exportImagePixels
• Example#2865 - Imagick::filter
• Example#2866 - Imagick::flipImage
• Example#2867 - Imagick::floodfillPaintImage example
• Example#2868 - Imagick::flopImage
• Example#2869 - Imagick::forwardFourierTransformImage
• Example#2870 - Imagick::frameImage
• Example#2871 - Create a sinusoidal gradient
• Example#2872 - Create a gradient from the polynomial (4x^2 - 4x + 1)
• Example#2873 - Create a complex gradient from the polynomial (4x^2 - 4x^2 + 1) modulated by a sinusoidal gradient
• Example#2874 - Imagick::fxImage
• Example#2875 - Imagick::gammaImage
• Example#2876 - Imagick::gaussianBlurImage
• Example#2877 - Using Imagick::getImageGeometry
• Example#2878 - Generates Imagick::getImageHistogram
• Example#2879 - Using Imagick::getImageLength:
• Example#2880 - Using Imagick::getImageProperties:
• Example#2881 - Using Imagick::getImageProperty:
• Example#2882 - Using Imagick::getIteratorIndex:
• Example#2883 - Imagick::getPixelIterator
• Example#2884 - Imagick::getPixelRegionIterator example
• Example#2885 - Getting the size of a raw RGB image set at 200x400, after scaling to 400x800 (compared to width / height)
• Example#2886 - Imagick::haldClutImage
• Example#2887 - Imagick::identifyFormat
• Example#2888 - Example Result Format
• Example#2889 - Imagick::implodeImage
• Example#2890 - Imagick::importImagePixels example
• Example#2891 - Imagick::levelImage
• Example#2892 - Imagick::linearStretchImage
• Example#2893 - Imagick::magnifyImage
• Example#2894 - Imagick::medianFilterImage
• Example#2895 - Imagick::mergeImageLayers
• Example#2896 - Imagick::modulateImage
• Example#2897 - Convolve Imagick::morphology
• Example#2898 - Correlate Imagick::morphology
• Example#2899 - Erode Imagick::morphology
• Example#2900 - Erode Intensity Imagick::morphology
• Example#2901 - Dilate Imagick::morphology
• Example#2902 - Dilate intensity Imagick::morphology
• Example#2903 - Distance with Chebyshev kernel Imagick::morphology
• Example#2904 - Distance with Manhattan kernel Imagick::morphology
• Example#2905 - Distance with ocatagonal kernel Imagick::morphology
• Example#2906 - Distance with Euclidean kernel Imagick::morphology
• Example#2907 - Edge Imagick::morphology
• Example#2908 - Open Imagick::morphology
• Example#2909 - Open intensity Imagick::morphology
• Example#2910 - Close Imagick::morphology
• Example#2911 - Close Intensity Imagick::morphology
• Example#2912 - Smooth Imagick::morphology
• Example#2913 - Edge in Imagick::morphology
• Example#2914 - Edge out Imagick::morphology
• Example#2915 - The 'TopHat' method, or more specifically 'White Top Hat', returns the pixels that were removed by a Opening of the shape, that is the pixels that were removed to round off the points, and the connecting bridged between shapes. Imagick::morphology
• Example#2916 - The 'BottomHat' method, also known as 'Black TopHat' is the pixels that a Closing of the shape adds to the image. That is the pixels that were used to fill in the 'holes', 'gaps', and 'bridges'. Imagick::morphology
• Example#2917 - Hit and Miss Imagick::morphology
• Example#2918 - Thinning Imagick::morphology
• Example#2919 - Thicken Imagick::morphology
• Example#2920 - Thick to generate a convex hull Imagick::morphology
• Example#2921 - Iterative morphology Imagick::morphology
• Example#2922 - Helper function to get an image silhouette Imagick::morphology
• Example#2923 - Imagick::motionBlurImage
• Example#2924 - Imagick::negateImage
• Example#2925 - Using Imagick::newImage:
• Example#2926 - Imagick::newPseudoImage
• Example#2927 - Imagick::normalizeImage
• Example#2928 - Imagick::oilPaintImage
• Example#2929 - Using Imagick::optimizeImageLayers
• Example#2930 - Imagick::orderedPosterizeImage
• Example#2931 - Using Imagick::pingImageBlob
• Example#2932 - Using Imagick::pingImageFile
• Example#2933 - A Imagick::polaroidImage example
• Example#2934 - Imagick::posterizeImage
• Example#2935 - Imagick::quantizeImage
• Example#2936 - Using Imagick::queryFontMetrics:
• Example#2937 - Imagick::queryFonts
• Example#2938 - Imagick::queryFormats
• Example#2939 - Imagick::radialBlurImage
• Example#2940 - Imagick::raiseImage
• Example#2941 - Imagick::randomThresholdImage
• Example#2942 - Imagick::readImageBlob
• Example#2943 - Imagick::recolorImage
• Example#2944 - Imagick::reduceNoiseImage
• Example#2945 - Imagick::resampleImage
• Example#2946 - Imagick::resizeImage
• Example#2947 - Imagick::rollImage
• Example#2948 - Imagick::rotateImage
• Example#2949 - Imagick::rotationalBlurImage
• Example#2950 - Using Imagick::roundCorners:
• Example#2951 - Imagick::scaleImage
• Example#2952 - Imagick::segmentImage
• Example#2953 - Imagick::selectiveBlurImage
• Example#2954 - Imagick::separateImageChannel
• Example#2955 - Imagick::sepiaToneImage
• Example#2956 - Imagick::setCompressionQuality
• Example#2957 - A Imagick::setFont example
• Example#2958 - A Imagick::setImage example
• Example#2959 - Imagick::setImageArtifact
• Example#2960 - Imagick::setImageBias
• Example#2961 - Imagick::setImageClipMask
• Example#2962 - Imagick::setImageCompressionQuality
• Example#2963 - Modify animated Gif with Imagick::setImageDelay
• Example#2964 - Basic Imagick::setImageIterations usage
• Example#2965 - A Imagick::setImageOpacity example
• Example#2966 - Imagick::setImageOrientation
• Example#2967 - Using Imagick::setImageProperty:
• Example#2968 - Imagick::setImageResolution
• Example#2969 - Modify animated Gif with Imagick::setImageTicksPerSecond
• Example#2970 - Using Imagick::setIteratorIndex:
• Example#2971 - Attempt to reach '$extent' sizeImagick::setOption
• Example#2972 - Imagick::setOption
• Example#2973 - Imagick::setOption
• Example#2974 - A Imagick::setPointSize example
• Example#2975 - Imagick::setProgressMonitor
• Example#2976 - Imagick::setSamplingFactors
• Example#2977 - Imagick::shadeImage
• Example#2978 - Imagick::shadowImage
• Example#2979 - Imagick::sharpenImage
• Example#2980 - Imagick::shaveImage
• Example#2981 - Imagick::shearImage
• Example#2982 - Create a gradient image using Imagick::sigmoidalContrastImage suitable for blending two images together smoothly, with the blending defined by $contrast and $the midpoint
• Example#2983 - Imagick::sketchImage
• Example#2984 - Imagick::smushImages
• Example#2985 - Imagick::solarizeImage
• Example#2986 - SPARSECOLORMETHOD_BARYCENTRIC Imagick::sparseColorImage
• Example#2987 - SPARSECOLORMETHOD_BILINEAR Imagick::sparseColorImage
• Example#2988 - SPARSECOLORMETHOD_SPEPARDS Imagick::sparseColorImage
• Example#2989 - SPARSECOLORMETHOD_VORONOI Imagick::sparseColorImage
• Example#2990 - SPARSECOLORMETHOD_BARYCENTRIC Imagick::sparseColorImage
• Example#2991 - createGradientImage is used by other examples. Imagick::sparseColorImage
• Example#2992 - Imagick::spliceImage
• Example#2993 - Imagick::spreadImage
• Example#2994 - Imagick::statisticImage
• Example#2995 - Imagick::subImageMatch
• Example#2996 - Imagick::swirlImage
• Example#2997 - Imagick::textureImage
• Example#2998 - Imagick::thresholdImage
• Example#2999 - Imagick::thumbnailImage
• Example#3000 - Imagick::tintImage
• Example#3001 - Using Imagick::transformImage:
• Example#3002 - Imagick::transformImageColorspace example
• Example#3003 - Imagick::transparentPaintImage
• Example#3004 - Imagick::transposeImage
• Example#3005 - Imagick::transverseImage
• Example#3006 - Using Imagick::trimImage:
• Example#3007 - Imagick::uniqueImageColors
• Example#3008 - Imagick::unsharpMaskImage
• Example#3009 - Imagick::vignetteImage
• Example#3010 - WaveImage can be quite slow Imagick::waveImage
• Example#3011 - Imagick::whiteThresholdImage
• Example#3012 - ImagickDraw::affine example
• Example#3013 - ImagickDraw::arc example
• Example#3014 - ImagickDraw::bezier example
• Example#3015 - ImagickDraw::circle example
• Example#3016 - ImagickDraw::composite example
• Example#3017 - ImagickDraw::ellipse example
• Example#3018 - ImagickDraw::line example
• Example#3019 - ImagickDraw::matte example
• Example#3020 - ImagickDraw::pathCurveToQuadraticBezierAbsolute example
• Example#3021 - ImagickDraw::pathCurveToQuadraticBezierSmoothAbsolute example
• Example#3022 - ImagickDraw::pathCurveToQuadraticBezierSmoothRelative example
• Example#3023 - ImagickDraw::pathStart example
• Example#3024 - ImagickDraw::point example
• Example#3025 - ImagickDraw::polygon example
• Example#3026 - ImagickDraw::polyline example
• Example#3027 - ImagickDraw::popDefs example
• Example#3028 - ImagickDraw::push example
• Example#3029 - ImagickDraw::pushPattern example
• Example#3030 - ImagickDraw::rectangle example
• Example#3031 - ImagickDraw::rotate example
• Example#3032 - ImagickDraw::roundRectangle example
• Example#3033 - ImagickDraw::scale example
• Example#3034 - ImagickDraw::setClipPath example
• Example#3035 - ImagickDraw::setClipRule example
• Example#3036 - ImagickDraw::setClipUnits example
• Example#3037 - ImagickDraw::setFillAlpha example
• Example#3038 - ImagickDraw::setFillColor
• Example#3039 - ImagickDraw::setFillOpacity
• Example#3040 - ImagickDraw::setFillRule example
• Example#3041 - ImagickDraw::setFont example
• Example#3042 - ImagickDraw::setFontFamily example
• Example#3043 - ImagickDraw::setFontSize example
• Example#3044 - ImagickDraw::setFontStretch example
• Example#3045 - ImagickDraw::setFontStyle example
• Example#3046 - ImagickDraw::setFontWeight example
• Example#3047 - ImagickDraw::setGravity example
• Example#3048 - ImagickDraw::setStrokeAlpha example
• Example#3049 - ImagickDraw::setStrokeAntialias example
• Example#3050 - ImagickDraw::setStrokeColor example
• Example#3051 - ImagickDraw::setStrokeDashArray example
• Example#3052 - ImagickDraw::setStrokeDashOffset example
• Example#3053 - ImagickDraw::setStrokeLineCap example
• Example#3054 - ImagickDraw::setStrokeLineJoin example
• Example#3055 - ImagickDraw::setStrokeMiterLimit example
• Example#3056 - ImagickDraw::setStrokeOpacity example
• Example#3057 - ImagickDraw::setStrokeWidth example
• Example#3058 - ImagickDraw::setTextAlignment example
• Example#3059 - ImagickDraw::setTextAntialias example
• Example#3060 - ImagickDraw::setTextDecoration example
• Example#3061 - ImagickDraw::setTextUnderColor example
• Example#3062 - ImagickDraw::setVectorGraphics example
• Example#3063 - ImagickDraw::setViewBox example
• Example#3064 - ImagickDraw::skewX example
• Example#3065 - ImagickDraw::skewY example
• Example#3066 - ImagickDraw::translate example
• Example#3067 - ImagickPixel::construct
• Example#3068 - Basic Imagick::getColor usage
• Example#3069 - Basic Imagick::getColorAsString usage
• Example#3070 - ImagickPixel getColorCount
• Example#3071 - Basic Imagick::getColorValue usage
• Example#3072 - ImagickPixel::getColorValueQuantum
• Example#3073 - Basic Imagick::getHSL example
• Example#3074 - ImagickPixel::isSimilar
• Example#3075 - ImagickPixel::setColor
• Example#3076 - Basic Imagick::setColorValue usage
• Example#3077 - ImagickPixel::setColorValueQuantum
• Example#3078 - Use ImagickPixel::setHSL to modify a color
• Example#3079 - ImagickPixelIterator::clear
• Example#3080 - ImagickPixelIterator::construct
• Example#3081 - ImagickPixelIterator::getNextIteratorRow
• Example#3082 - ImagickPixelIterator::resetIterator
• Example#3083 - ImagickPixelIterator::setIteratorRow
• Example#3084 - ImagickKernel::addKernel
• Example#3085 - ImagickKernel::addUnityKernel
• Example#3086 - ImagickKernel::addUnityKernel
• Example#3087 - ImagickKernel::fromBuiltin
• Example#3088 - ImagickKernel::fromMatrix
• Example#3089 - ImagickKernel::getMatrix
• Example#3090 - ImagickKernel::scale
• Example#3091 - ImagickKernel::separate
• Example#3092 - imap_append example
• Example#3093 - imap_check example
• Example#3094 - imap_createmailbox example
• Example#3095 - imap_delete example
• Example#3096 - imap_fetch_overview example
• Example#3097 - imap_gc example
• Example#3098 - imap_get_quota example
• Example#3099 - imap_get_quota 4.3 or greater example
• Example#3100 - imap_get_quotaroot example
• Example#3101 - imap_getacl example
• Example#3102 - imap_getmailboxes example
• Example#3103 - imap_is_open example
• Example#3104 - imap_list example
• Example#3105 - imap_mail_compose example
• Example#3106 - imap_mailboxmsginfo example
• Example#3107 - imap_mime_header_decode example
• Example#3108 - Different use of imap_open
• Example#3109 - imap_open example
• Example#3110 - imap_ping Example
• Example#3111 - imap_reopen example
• Example#3112 - imap_rfc822_parse_adrlist example
• Example#3113 - imap_rfc822_write_address example
• Example#3114 - imap_search example
• Example#3115 - imap_set_quota example
• Example#3116 - imap_setflag_full example
• Example#3117 - imap_status example
• Example#3118 - imap_thread Example
• Example#3119 - imap_timeout example
• Example#3120 - Basic imap_utf8 Usage
• Example#3121 - 计算散列值并订阅一个用户
• Example#3122 - 发送邮件
• Example#3123 - 使用额外标头发送邮件
• Example#3124 - 使用 array 形式的额外标头发送邮件
• Example#3125 - 使用附加命令行参数发送邮件。
• Example#3126 - Sending HTML email
• Example#3127 - mailparse_determine_best_xfer_encoding example
• Example#3128 - mailparse_rfc822_parse_addresses example
• Example#3129 - mailparse_stream_encode example
• Example#3130 - mailparse_uudecode_all example
• Example#3131 - bcadd 示例
• Example#3132 - bccomp 示例
• Example#3133 - bcdiv 示例
• Example#3134 - bcmod 示例
• Example#3135 - 带小数点的 bcmod
• Example#3136 - bcmul 示例
• Example#3137 - bcmul scale example
• Example#3138 - bcpow 示例
• Example#3139 - bcpow scale example
• Example#3140 - bcscale 示例
• Example#3141 - bcsqrt 示例
• Example#3142 - bcsub 示例
• Example#3143 - Factorial function using GMP
• Example#3144 - gmp_abs example
• Example#3145 - gmp_add example
• Example#3146 - gmp_and example
• Example#3147 - gmp_clrbit example
• Example#3148 - gmp_cmp example
• Example#3149 - gmp_com example
• Example#3150 - gmp_div_q example
• Example#3151 - Division of GMP numbers
• Example#3152 - gmp_div_r example
• Example#3153 - gmp_divexact example
• Example#3154 - gmp_export example
• Example#3155 - gmp_fact example
• Example#3156 - gmp_gcd example
• Example#3157 - Solving a linear Diophantine equation
• Example#3158 - gmp_hamdist example
• Example#3159 - gmp_import example
• Example#3160 - Creating GMP number
• Example#3161 - gmp_intval example
• Example#3162 - gmp_invert example
• Example#3163 - gmp_jacobi example
• Example#3164 - gmp_legendre example
• Example#3165 - gmp_mod example
• Example#3166 - gmp_mul example
• Example#3167 - gmp_neg example
• Example#3168 - gmp_nextprime example
• Example#3169 - gmp_or example
• Example#3170 - gmp_perfect_square example
• Example#3171 - gmp_popcount example
• Example#3172 - gmp_pow example
• Example#3173 - gmp_powm example
• Example#3174 - gmp_prob_prime example
• Example#3175 - gmp_random example
• Example#3176 - gmp_random_bits example
• Example#3177 - gmp_random_range example
• Example#3178 - gmp_random_seed example
• Example#3179 - gmp_scan0 example
• Example#3180 - gmp_scan1 example
• Example#3181 - gmp_setbit example - 0 index
• Example#3182 - gmp_setbit example - 1 index
• Example#3183 - gmp_setbit example - clearing a bit
• Example#3184 - gmp_sign example
• Example#3185 - gmp_sqrt example
• Example#3186 - gmp_sqrtrem example
• Example#3187 - Converting a GMP number to a string
• Example#3188 - gmp_sub example
• Example#3189 - gmp_testbit example
• Example#3190 - gmp_xor example
• Example#3191 - abs 示例
• Example#3192 - base_convert 示例
• Example#3193 - bindec 示例
• Example#3194 - bindec 将输入解读为无符号整数
• Example#3195 - ceil 示例
• Example#3196 - cos 示例
• Example#3197 - decbin 示例
• Example#3198 - dechex 示例
• Example#3199 - 大整数的 dechex 示例
• Example#3200 - decoct 示例
• Example#3201 - deg2rad 示例
• Example#3202 - exp 示例
• Example#3203 - Using fdiv
• Example#3204 - floor 示例
• Example#3205 - fmod 的使用
• Example#3206 - fpow example
• Example#3207 - hexdec 示例
• Example#3208 - intdiv 的一些示例
• Example#3209 - is_finite 示例
• Example#3210 - is_infinite 示例
• Example#3211 - is_nan 示例
• Example#3212 - 使用 max 的示例
• Example#3213 - min 用法的示例
• Example#3214 - octdec 示例
• Example#3215 - pi 示例
• Example#3216 - pow 的一些示例
• Example#3217 - rad2deg 示例
• Example#3218 - round 示例
• Example#3219 - precision 如何影响 float
• Example#3220 - mode 示例
• Example#3221 - 带 precision 的 mode 示例
• Example#3222 - sin 示例
• Example#3223 - sqrt 示例
• Example#3224 - tan 示例
• Example#3225 - Evaluating a FDF document
• Example#3226 - Adding JavaScript code to a FDF
• Example#3227 - Populating a PDF document
• Example#3228 - Storing an uploaded file
• Example#3229 - Detecting all fieldnames in a FDF
• Example#3230 - Accessing the form data
• Example#3231 - Accessing the form data
• Example#3232 - Retrieving FDF as a string
• Example#3233 - Passing FDF data to a second form
• Example#3234 - gnupg clearsign example (procedural)
• Example#3235 - gnupg clearsign example (OO)
• Example#3236 - keylistiterator
• Example#3237 - Procedural gnupg_adddecryptkey example
• Example#3238 - OO gnupg_adddecryptkey example
• Example#3239 - Procedural gnupg_addencryptkey example
• Example#3240 - OO gnupg_addencryptkey example
• Example#3241 - Procedural gnupg_addsignkey example
• Example#3242 - OO gnupg_addsignkey example
• Example#3243 - Procedural gnupg_cleardecryptkeys example
• Example#3244 - OO gnupg_cleardecryptkeys example
• Example#3245 - Procedural gnupg_clearencryptkeys example
• Example#3246 - OO gnupg_clearencryptkeys example
• Example#3247 - Procedural gnupg_clearsignkeys example
• Example#3248 - OO gnupg_clearsignkeys example
• Example#3249 - Procedural gnupg_decrypt example
• Example#3250 - OO gnupg_decrypt example
• Example#3251 - Procedural gnupg_decryptverify example
• Example#3252 - OO gnupg_decryptverify example
• Example#3253 - Procedural gnupg_deletekey example
• Example#3254 - OO gnupg_deletekey example
• Example#3255 - Procedural gnupg_encrypt example
• Example#3256 - OO gnupg_encrypt example
• Example#3257 - Procedural gnupg_encryptsign example
• Example#3258 - OO gnupg_encryptsign example
• Example#3259 - Procedural gnupg_export example
• Example#3260 - OO gnupg_export example
• Example#3261 - Procedural gnupg_getengineinfo example
• Example#3262 - OO gnupg_getengineinfo example
• Example#3263 - Procedural gnupg_geterror example
• Example#3264 - OO gnupg_geterror example
• Example#3265 - Procedural gnupg_geterrorinfo example
• Example#3266 - OO gnupg_geterrorinfo example
• Example#3267 - Procedural gnupg_getprotocol example
• Example#3268 - OO gnupg_getprotocol example
• Example#3269 - Procedural gnupg_gettrustlist example
• Example#3270 - OO gnupg_gettrustlist example
• Example#3271 - Procedural gnupg_import example
• Example#3272 - OO gnupg_import example
• Example#3273 - Procedural gnupg_init example with default setting
• Example#3274 - Procedural gnupg_init example with overriden file name and home dir
• Example#3275 - OO gnupg initializer example with default setting
• Example#3276 - OO gnupg initializer example with overriden file name and home dir
• Example#3277 - Procedural gnupg_keyinfo example
• Example#3278 - OO gnupg_keyinfo example
• Example#3279 - Procedural gnupg_listsignatures example
• Example#3280 - OO gnupg_listsignatures example
• Example#3281 - Procedural gnupg_setarmor example
• Example#3282 - OO gnupg_setarmor example
• Example#3283 - Procedural gnupg_seterrormode example
• Example#3284 - OO gnupg_seterrormode example
• Example#3285 - Procedural gnupg_setsignmode example
• Example#3286 - OO gnupg_setsignmode example
• Example#3287 - Procedural gnupg_sign example
• Example#3288 - OO gnupg_sign example
• Example#3289 - Procedural gnupg_verify example
• Example#3290 - OO gnupg_verify example
• Example#3291 - Creating and using a pattern
• Example#3292 - Creating and using a template
• Example#3293 - Hyphennate a text
• Example#3294 - Drawing a rectangle
• Example#3295 - Creating and using a spot color
• Example#3296 - Rotation of the coordinate system
• Example#3297 - Placing text at a given position
• Example#3298 - Drawing a dashed line
• Example#3299 - Translation of the coordinate system
• Example#3300 - A rpmdbinfo example
• Example#3301 - Searching for the package owning a file
• Example#3302 - A rpminfo example
• Example#3303 - example
• Example#3304 - example
• Example#3305 - example
• Example#3306 - example
• Example#3307 - example
• Example#3308 - example
• Example#3309 - example
• Example#3310 - example
• Example#3311 - example
• Example#3312 - example
• Example#3313 - example
• Example#3314 - example
• Example#3315 - example
• Example#3316 - setColumn example
• Example#3317 - setRow example
• Example#3318 - Align style example
• Example#3319 - Bold style example
• Example#3320 - Italic style example
• Example#3321 - Underline style example
• Example#3322 - Incorrect requests
• Example#3323 - Calling request from a request callback
• Example#3324 - Calling request from a request callback
• Example#3325 - Using eio with libevent
• Example#3326 - Cancelling a request
• Example#3327 - Calling eio_chmod
• Example#3328 - Making a custom request
• Example#3329 - Grouping requests
• Example#3330 - Using eio with libevent extension
• Example#3331 - Using eio with event extension
• Example#3332 - eio_cancel example
• Example#3333 - eio_custom example
• Example#3334 - eio_event_loop example
• Example#3335 - eio_lstat example
• Example#3336 - Using eio with libevent
• Example#3337 - eio_grp example
• Example#3338 - Grouping requests
• Example#3339 - eio_link example
• Example#3340 - eio_lstat example
• Example#3341 - eio_mkdir example
• Example#3342 - eio_mknod example
• Example#3343 - eio_nreqs example
• Example#3344 - eio_open example
• Example#3345 - eio_poll example
• Example#3346 - eio_read example
• Example#3347 - eio_readdir example
• Example#3348 - eio_readlink example
• Example#3349 - eio_realpath example
• Example#3350 - eio_rename example
• Example#3351 - eio_rmdir example
• Example#3352 - eio_stat example
• Example#3353 - eio_statvfs example
• Example#3354 - eio_symlink example
• Example#3355 - Simple timers
• Example#3356 - Periodic timer. Tick each 10.5 seconds
• Example#3357 - Periodic timer. Use reschedule callback
• Example#3358 - Periodic timer. Tick every 10.5 seconds starting at now
• Example#3359 - Wait until STDIN is readable
• Example#3360 - Use some async I/O to access a socket
• Example#3361 - Embedding one loop into another
• Example#3362 - Embedding loop created with kqueue backend into the default loop
• Example#3363 - Handle SIGTERM signal
• Example#3364 - Monitor changes of /var/log/messages
• Example#3365 - Monotor changes of /var/log/messages. Avoid missing updates by means of one second delay
• Example#3366 - Process status changes
• Example#3367 - Using reschedule callback
• Example#3368 - Embedding loop created with kqueue backend into the default loop
• Example#3369 - Embedding one loop into another
• Example#3370 - Embedding loop created with kqueue backend into the default loop
• Example#3371 - Embedding loop created with kqueue backend into the default loop
• Example#3372 - Periodic timer. Use reschedule callback
• Example#3373 - Periodic timer. Tick every 10.5 seconds starting at now
• Example#3374 - Hourly watcher
• Example#3375 - Handle SIGTERM signal
• Example#3376 - Monitor changes of /var/log/messages
• Example#3377 - Monitor changes of /var/log/messages
• Example#3378 - Simple timers
• Example#3379 - Monotor changes of /var/log/messages. Avoid missing updates by means of one second delay
• Example#3380 - Register an I/O watcher for some UDP socket but do not keep the event loop from running just because of that watcher.
• Example#3381 - Expect Usage Example
• Example#3382 - Another Expect Usage Example
• Example#3383 - expect_expectl example
• Example#3384 - expect_popen example
• Example#3385 - 进程控制示例
• Example#3386 - pcntl_fork 示例
• Example#3387 - pcntl_get_last_error example
• Example#3388 - pcntl_rfork example
• Example#3389 - pcntl_signal 示例
• Example#3390 - pcntl_signal_dispatch 示例
• Example#3391 - pcntl_signal_get_handler example
• Example#3392 - pcntl_sigprocmask 示例
• Example#3393 - pcntl_sigwaitinfo 示例
• Example#3394 - pcntl_strerror example
• Example#3395 - posix_access example
• Example#3396 - posix_ctermid example
• Example#3397 - posix_eaccess example
• Example#3398 - posix_fpathconf example
• Example#3399 - posix_get_last_error example
• Example#3400 - posix_getcwd example
• Example#3401 - posix_getegid example
• Example#3402 - posix_geteuid example
• Example#3403 - posix_getgid example
• Example#3404 - Example use of posix_getgrgid
• Example#3405 - Example use of posix_getgrnam
• Example#3406 - Example use of posix_getgroups
• Example#3407 - Example use of posix_getlogin
• Example#3408 - Example use of posix_getpgid
• Example#3409 - posix_getpid 的使用例子
• Example#3410 - Example use of posix_getppid
• Example#3411 - Example use of posix_getpwnam
• Example#3412 - Example use of posix_getpwuid
• Example#3413 - Example use of posix_getrlimit
• Example#3414 - Example use of posix_getsid
• Example#3415 - Example use of posix_getuid
• Example#3416 - A posix_mknod example
• Example#3417 - posix_pathconf example
• Example#3418 - posix_setegid example
• Example#3419 - posix_setgid example
• Example#3420 - posix_setuid example
• Example#3421 - posix_strerror example
• Example#3422 - posix_sysconf example
• Example#3423 - Example use of posix_times
• Example#3424 - Example use of posix_uname
• Example#3425 - escapeshellarg 的例子
• Example#3426 - escapeshellcmd example
• Example#3427 - exec 示例
• Example#3428 - 使用 proc_open 函数将进程设置为高优先级
• Example#3429 - proc_open 示例
• Example#3430 - proc_open 在 Windows 上的怪异行为
• Example#3431 - shell_exec 示例
• Example#3432 - system 示例
• Example#3433 - Example showing Future as return value
• Example#3434 - Example showing Future as synchronization point
• Example#3435 - 获取对象属性表中的部分条目
• Example#3436 - 计算对象中的属性数量
• Example#3437 - Runtime inheritance
• Example#3438 - 检测对象状态
• Example#3439 - 检测对象状态
• Example#3440 - 合并数据到对象的属性表
• Example#3441 - 等待和唤醒
• Example#3442 - Notifications and Waiting
• Example#3443 - 弹出对象属性表中的最后一项数据
• Example#3444 - 弹出对象属性表中第一项数据
• Example#3445 - 同步
• Example#3446 - 等待和唤醒
• Example#3447 - 返回创建线程的线程或进程ID
• Example#3448 - 获取当前执行线程
• Example#3449 - 返回当前执行线程的ID
• Example#3450 - 返回引用线程的ID
• Example#3451 - 检测线程状态
• Example#3452 - 监测线程是否开始执行
• Example#3453 - 加入线程
• Example#3454 - 开始线程
• Example#3455 - A basic example of Worker::collect
• Example#3456 - Worker::getStacked 基本示例
• Example#3457 - 检测 Worker 对象状态
• Example#3458 - 关闭 Worker
• Example#3459 - 向 Worker 中入栈任务并执行
• Example#3460 - 从 Worker 栈中移除对象
• Example#3461 - Pool::collect 基本用法示例
• Example#3462 - 创建 Pool 对象
• Example#3463 - 完全停止一个 Pool
• Example#3464 - 提交任务
• Example#3465 - 提交任务到特定的 Worker
• Example#3466 - New immutability semantics of Threaded
• Example#3467 - Volatile use-case
• Example#3468 - Shared Memory Operations Overview
• Example#3469 - Closing shared memory block
• Example#3470 - Deleting shared memory block
• Example#3471 - Create a new shared memory block
• Example#3472 - Reading shared memory block
• Example#3473 - Getting the size of the shared memory block
• Example#3474 - Writing to shared memory block
• Example#3475 - SyncMutex::__construct named mutex with lock timeout example
• Example#3476 - SyncMutex::__construct unnamed mutex example
• Example#3477 - SyncMutex::lock example
• Example#3478 - SyncMutex::unlock example
• Example#3479 - SyncSemaphore::__construct example
• Example#3480 - SyncSemaphore::lock example
• Example#3481 - SyncSemaphore::unlock example
• Example#3482 - SyncEvent::__construct example
• Example#3483 - SyncEvent::fire example
• Example#3484 - SyncEvent::reset example
• Example#3485 - SyncEvent::wait example
• Example#3486 - SyncReaderWriter::__construct example
• Example#3487 - SyncReaderWriter::readlock example
• Example#3488 - SyncReaderWriter::readunlock example
• Example#3489 - SyncReaderWriter::writelock example
• Example#3490 - SyncReaderWriter::writeunlock example
• Example#3491 - SyncSharedMemory::__construct example
• Example#3492 - SyncSharedMemory::first example
• Example#3493 - SyncSharedMemory::__construct example
• Example#3494 - SyncSharedMemory::size example
• Example#3495 - SyncSharedMemory::write example
• Example#3496 - geoip_asnum_by_name 示例
• Example#3497 - geoip_continent_code_by_name 函数的使用范例：
• Example#3498 - geoip_country_code_by_name 函数的范例：
• Example#3499 - geoip_country_code3_by_name 函数的使用范例：
• Example#3500 - geoip_country_name_by_name 函数的使用范例：
• Example#3501 - geoip_database_info 函数的使用范例：
• Example#3502 - geoip_db_avail 函数的使用范例：
• Example#3503 - geoip_db_filename函数的使用范例：
• Example#3504 - geoip_db_get_all_info 使用范例：
• Example#3505 - geoip_db_get_all_info 使用范例：
• Example#3506 - 一个 geoip_domain_by_name 使用范例：
• Example#3507 - 一个 geoip_id_by_name 使用范例：
• Example#3508 - 一个 geoip_isp_by_name 使用范例：
• Example#3509 - 一个 geoip_netspeedcell_by_name 使用范例：
• Example#3510 - 一个 geoip_org_by_name 使用范例：
• Example#3511 - geoip_record_by_name 例子：
• Example#3512 - geoip_region_by_name 例子：
• Example#3513 - geoip_region_name_by_code 使用美国和加拿大地区的范例。
• Example#3514 - geoip_region_name_by_code 使用 FIPS 代码的范例：
• Example#3515 - geoip_setup_custom_directory 例子：
• Example#3516 - geoip_time_zone_by_country_and_region 使用美国和加拿大地区的范例：
• Example#3517 - geoip_time_zone_by_country_and_region 使用 FIPS 代码的范例：
• Example#3518 - xor.data file
• Example#3519 - 一般训练
• Example#3520 - 一般测试
• Example#3521 - fann_create_train_from_callback 示例
• Example#3522 - fann_read_train_from_file 函数的使用范例：
• Example#3523 - igbinary_serialize example
• Example#3524 - 返回 array 的 JsonSerializable::jsonSerialize 例子
• Example#3525 - 返回关联 array 的 JsonSerializable::jsonSerialize 例子
• Example#3526 - 返回 int 的 JsonSerializable::jsonSerialize 例子s
• Example#3527 - 返回 string 的JsonSerializable::jsonSerialize 例子
• Example#3528 - json_decode 的例子
• Example#3529 - Accessing invalid object properties
• Example#3530 - common mistakes using json_decode
• Example#3531 - depth errors
• Example#3532 - json_decode of large integers
• Example#3533 - json_encode 例子
• Example#3534 - json_encode 函数中 flags 参数的用法
• Example#3535 - 选项 JSON_NUMERIC_CHECK 例子
• Example#3536 - 连续与非连续数组示例
• Example#3537 - 选项 JSON_PRESERVE_ZERO_FRACTION 的例子
• Example#3538 - json_last_error 例子
• Example#3539 - json_encode 的 json_last_error
• Example#3540 - json_last_error 和 JSON_THROW_ON_ERROR
• Example#3541 - json_validate 示例
• Example#3542 - simdjson_decode examples
• Example#3543 - Accessing invalid object properties
• Example#3544 - common mistakes using simdjson_decode
• Example#3545 - depth errors
• Example#3546 - simdjson_decode of large integers
• Example#3547 - simdjson_decode examples
• Example#3548 - depth errors
• Example#3549 - Lua::assign示例
• Example#3550 - Lua::call示例
• Example#3551 - Lua::eval示例
• Example#3552 - Lua::registerCallback示例
• Example#3553 - LuaClosure::__invoke示例
• Example#3554 - Execute some Lua code
• Example#3555 - Calling a Lua function
• Example#3556 - Profiling Lua code
• Example#3557 - Loading code into Lua
• Example#3558 - Manipulating the usage timer
• Example#3559 - Registering PHP functions to call from Lua
• Example#3560 - Calling a Lua function
• Example#3561 - Calling a Lua function
• Example#3562 - constant 与常量一起使用
• Example#3563 - constant 和 Enum Cases 一起使用（自 PHP 8.1.0 起）
• Example#3564 - 定义常量
• Example#3565 - 以保留名称定义常量
• Example#3566 - 检查常量
• Example#3567 - 检测 Enum Cases（自 PHP 8.1.0 起）
• Example#3568 - eval 例子 - 简单的文本合并
• Example#3569 - exit 例子
• Example#3570 - exit 状态码例子
• Example#3571 - 无论如何，Shutdown函数与析构函数都会被执行
• Example#3572 - 列出所有用户浏览器的信息
• Example#3573 - __halt_compiler 例子
• Example#3574 - highlight_string 例子
• Example#3575 - hrtime 的用法
• Example#3576 - ignore_user_abort例子
• Example#3577 - pack 范例
• Example#3578 - php_strip_whitespace 的例子
• Example#3579 - Basic sapi_windows_generate_ctrl_event Usage
• Example#3580 - Basic sapi_windows_set_ctrl_handler Usage
• Example#3581 - sapi_windows_vt100_support default state
• Example#3582 - sapi_windows_vt100_support changing state
• Example#3583 - Example usage of VT100 support enabled
• Example#3584 - sleep 示例
• Example#3585 - sys_getloadavg 示例
• Example#3586 - time_nanosleep 示例
• Example#3587 - time_sleep_until 示例
• Example#3588 - uniqid 例子
• Example#3589 - unpack example
• Example#3590 - unpack example with a repeater
• Example#3591 - unpack example with unnamed keys
• Example#3592 - usleep例子
• Example#3593 - Random Example
• Example#3594 - mt_rand 例子
• Example#3595 - rand 例子
• Example#3596 - random_bytes example
• Example#3597 - random_int 示例
• Example#3598 - Random\Randomizer::__construct example
• Example#3599 - Random\Randomizer::getBytes example
• Example#3600 - Random\Randomizer::getBytesFromString example
• Example#3601 - Generate a random code for multi-factor authentication
• Example#3602 - Select from a string with a non-uniform distribution
• Example#3603 - Random\Randomizer::getFloat example
• Example#3604 - Random\Randomizer::getInt example
• Example#3605 - Random\Randomizer::nextFloat example
• Example#3606 - Incorrect scaling using an affine transformation
• Example#3607 - Random\Randomizer::nextInt example
• Example#3608 - Random\Randomizer::pickArrayKeys example
• Example#3609 - Picking random values
• Example#3610 - Random\Randomizer::__serialize example
• Example#3611 - Random\Randomizer::shuffleArray example
• Example#3612 - Random\Randomizer::shuffleBytes example
• Example#3613 - Byte-wise shuffling breaks Unicode characters
• Example#3614 - Random\Randomizer::__unserialize example
• Example#3615 - Random\Engine::generate example
• Example#3616 - Random\Engine\Mt19937::__construct example
• Example#3617 - Random\Engine\Mt19937::__debugInfo example
• Example#3618 - Random\Engine\Mt19937::__serialize example
• Example#3619 - Random\Engine\Mt19937::__unserialize example
• Example#3620 - Random\Engine\PcgOneseq128XslRr64::__construct example
• Example#3621 - Deriving a seed from a string
• Example#3622 - Random\Engine\PcgOneseq128XslRr64::__debugInfo example
• Example#3623 - Random\Engine\PcgOneseq128XslRr64::jump example
• Example#3624 - Randomizer methods may call the engine more than once
• Example#3625 - Random\Engine\PcgOneseq128XslRr64::__serialize example
• Example#3626 - Random\Engine\PcgOneseq128XslRr64::__unserialize example
• Example#3627 - Random\Engine\Xoshiro256StarStar::__construct example
• Example#3628 - Deriving a seed from a string
• Example#3629 - Random\Engine\Xoshiro256StarStar::__debugInfo example
• Example#3630 - Random\Engine\Xoshiro256StarStar::jump example
• Example#3631 - Random\Engine\Xoshiro256StarStar::jumpLong example
• Example#3632 - Random\Engine\Xoshiro256StarStar::__serialize example
• Example#3633 - Random\Engine\Xoshiro256StarStar::__unserialize example
• Example#3634 - 获取与设置根目录
• Example#3635 - 获取与设置 logger
• Example#3636 - 快速写入日志
• Example#3637 - 快速获取某级别下日志的数量
• Example#3638 - 获取某级别下日志的详情
• Example#3639 - seaslog_get_author 示例
• Example#3640 - seaslog_get_version 示例
• Example#3641 - SeasLog::alert 示例
• Example#3642 - SeasLog::analyzerCount example
• Example#3643 - SeasLog::analyzerDetail example
• Example#3644 - SeasLog::closeLoggerStream example
• Example#3645 - SeasLog::__construct example
• Example#3646 - SeasLog::critical 示例
• Example#3647 - SeasLog::debug 示例
• Example#3648 - SeasLog::__destruct example
• Example#3649 - SeasLog::emergency 示例
• Example#3650 - SeasLog::error 示例
• Example#3651 - SeasLog::flushBuffer 示例
• Example#3652 - SeasLog::getBasePath 示例
• Example#3653 - SeasLog::getBuffer 示例
• Example#3654 - SeasLog::getBufferEnabled example
• Example#3655 - SeasLog::getDatetimeFormat 示例
• Example#3656 - SeasLog::getLastLogger 示例
• Example#3657 - SeasLog::getRequestID 示例
• Example#3658 - SeasLog::getRequestVariable example
• Example#3659 - SeasLog::info 示例
• Example#3660 - SeasLog::log 示例
• Example#3661 - SeasLog::notice 示例
• Example#3662 - SeasLog::setBasePath 示例
• Example#3663 - SeasLog::setDatetimeFormat 示例
• Example#3664 - SeasLog::setLogger 示例
• Example#3665 - SeasLog::setRequestID 示例
• Example#3666 - SeasLog::setRequestVariable example
• Example#3667 - SeasLog::warning 示例
• Example#3668 - SplStack 示例
• Example#3669 - SplQueue 示例
• Example#3670 - 使用 SplQueue 高效处理任务
• Example#3671 - SplFixedArray usage example
• Example#3672 - SplFixedArray::__construct example
• Example#3673 - SplFixedArray::count example
• Example#3674 - SplFixedArray::fromArray example
• Example#3675 - SplFixedArray::getSize example
• Example#3676 - SplFixedArray::setSize example
• Example#3677 - SplFixedArray::toArray example
• Example#3678 - SplObjectStorage as a set
• Example#3679 - SplObjectStorage as a map
• Example#3680 - SplObjectStorage::addAll example
• Example#3681 - SplObjectStorage::attach example
• Example#3682 - SplObjectStorage::contains example
• Example#3683 - SplObjectStorage::count example
• Example#3684 - SplObjectStorage::current example
• Example#3685 - SplObjectStorage::detach example
• Example#3686 - SplObjectStorage::getHash example
• Example#3687 - SplObjectStorage::getInfo example
• Example#3688 - SplObjectStorage::key example
• Example#3689 - SplObjectStorage::next example
• Example#3690 - SplObjectStorage::offsetExists example
• Example#3691 - SplObjectStorage::offsetGet example
• Example#3692 - SplObjectStorage::offsetSet example
• Example#3693 - SplObjectStorage::offsetUnset example
• Example#3694 - SplObjectStorage::removeAll example
• Example#3695 - SplObjectStorage::removeAllExcept example
• Example#3696 - SplObjectStorage::rewind example
• Example#3697 - SplObjectStorage::seek example
• Example#3698 - SplObjectStorage::serialize example
• Example#3699 - SplObjectStorage::setInfo example
• Example#3700 - SplObjectStorage::unserialize example
• Example#3701 - SplObjectStorage::valid example
• Example#3702 - AppendIterator::append example
• Example#3703 - Iterating AppendIterator with foreach
• Example#3704 - Iterating AppendIterator with the AppendIterator API
• Example#3705 - AppendIterator.getIteratorIndex basic example
• Example#3706 - AppendIterator::key basic example
• Example#3707 - ArrayIterator::current example
• Example#3708 - ArrayIterator::key example
• Example#3709 - ArrayIterator::next example
• Example#3710 - ArrayIterator::rewind example
• Example#3711 - ArrayIterator::valid example
• Example#3712 - CachingIterator::getCache example
• Example#3713 - Available callback arguments
• Example#3714 - Callback basic examples
• Example#3715 - A DirectoryIterator::__construct example
• Example#3716 - A DirectoryIterator::current example
• Example#3717 - A DirectoryIterator::getBasename example
• Example#3718 - DirectoryIterator::getExtension example
• Example#3719 - A DirectoryIterator::getFilename example
• Example#3720 - A DirectoryIterator::isDot example
• Example#3721 - A DirectoryIterator::key example
• Example#3722 - DirectoryIterator::next example
• Example#3723 - DirectoryIterator::rewind example
• Example#3724 - DirectoryIterator::seek example
• Example#3725 - A DirectoryIterator::__toString example
• Example#3726 - A DirectoryIterator::valid example
• Example#3727 - FilesystemIterator::__construct example
• Example#3728 - FilesystemIterator::current example
• Example#3729 - FilesystemIterator::key example
• Example#3730 - FilesystemIterator::next example
• Example#3731 - FilesystemIterator::rewind example
• Example#3732 - FilesystemIterator::key example
• Example#3733 - FilterIterator::accept example
• Example#3734 - GlobIterator example
• Example#3735 - GlobIterator::count example
• Example#3736 - InfiniteIterator::__construct example
• Example#3737 - LimitIterator usage example
• Example#3738 - LimitIterator::__construct example
• Example#3739 - LimitIterator::getPosition example
• Example#3740 - Iterating a MultipleIterator
• Example#3741 - NoRewindIterator::__construct example
• Example#3742 - NoRewindIterator::rewind example
• Example#3743 - RecursiveArrayIterator::getChildren example
• Example#3744 - RecursiveArrayIterator::hasChildren example
• Example#3745 - Available callback arguments
• Example#3746 - Recursive callback basic example
• Example#3747 - RecursiveCallbackFilterIterator::hasChildren basic usage
• Example#3748 - RecursiveDirectoryIterator example
• Example#3749 - getSubPath example
• Example#3750 - getSubPathname example
• Example#3751 - Basic RecursiveFilterIterator example
• Example#3752 - RecursiveFilterIterator example
• Example#3753 - Iterating a RecursiveIteratorIterator
• Example#3754 - RecursiveRegexIterator::__construct example
• Example#3755 - RecursiveRegexIterator::getChildren example
• Example#3756 - RecursiveRegexIterator::hasChildren example
• Example#3757 - RegexIterator::accept example
• Example#3758 - RegexIterator::__construct example
• Example#3759 - RegexIterator::getFlags example
• Example#3760 - RegexIterator::getMode example
• Example#3761 - RegexIterator::getPregFlags example
• Example#3762 - RegexIterator::setFlags example
• Example#3763 - RegexIterator::setMode example
• Example#3764 - RegexIterator::setPregFlags example
• Example#3765 - Countable::count 示例
• Example#3766 - 基础用法
• Example#3767 - SeekableIterator::seek example
• Example#3768 - class_implements 示例
• Example#3769 - class_parents 示例
• Example#3770 - class_uses example
• Example#3771 - iterator_apply 示例
• Example#3772 - iterator_count 示例
• Example#3773 - iterator_count 修改位置
• Example#3774 - iterator_count 在 foreach 中循环
• Example#3775 - iterator_to_array 示例
• Example#3776 - spl_autoload_extensions 示例
• Example#3777 - spl_autoload_register 作为 __autoload 函数的替代
• Example#3778 - 类未能加载的 spl_autoload_register 例子
• Example#3779 - 提供的标识符将不包含开头的反斜线
• Example#3780 - spl_classes example
• Example#3781 - A spl_object_hash 示例
• Example#3782 - A spl_object_id example
• Example#3783 - SplFileInfo::__construct 示例
• Example#3784 - SplFileInfo::getATime example
• Example#3785 - SplFileInfo::getBasename example
• Example#3786 - SplFileInfo::getCTime 例子
• Example#3787 - SplFileInfo::getExtension example
• Example#3788 - SplFileInfo::getFilename example
• Example#3789 - SplFileInfo::getGroup example
• Example#3790 - SplFileInfo::getLinkTarget example
• Example#3791 - SplFileInfo::getMTime example
• Example#3792 - SplFileInfo::getOwner example
• Example#3793 - SplFileInfo::getPath example
• Example#3794 - SplFileInfo::getPathInfo example
• Example#3795 - SplFileInfo::getPathname example
• Example#3796 - SplFileInfo::getPerms example
• Example#3797 - SplFileInfo::getRealPath example
• Example#3798 - SplFileInfo::getSize example
• Example#3799 - SplFileInfo::getType example
• Example#3800 - SplFileInfo::isDir example
• Example#3801 - SplFileInfo::isExecutable example
• Example#3802 - SplFileInfo::isFile example
• Example#3803 - SplFileInfo::isLink example
• Example#3804 - SplFileInfo::isReadable example
• Example#3805 - SplFileInfo::isWriteable example
• Example#3806 - SplFileInfo::openFile example
• Example#3807 - SplFileInfo::setFileClass example
• Example#3808 - SplFileInfo::setFileClass example
• Example#3809 - SplFileInfo::__toString example
• Example#3810 - SplFileObject::__construct example
• Example#3811 - SplFileObject::current example
• Example#3812 - SplFileObject::eof example
• Example#3813 - SplFileObject::fflush example
• Example#3814 - SplFileObject::fgetc example
• Example#3815 - SplFileObject::fgetcsv example
• Example#3816 - SplFileObject::READ_CSV example
• Example#3817 - SplFileObject::fgets example
• Example#3818 - SplFileObject::fgetss example
• Example#3819 - SplFileObject::flock example
• Example#3820 - SplFileObject::fpassthru example
• Example#3821 - SplFileObject::fputcsv example
• Example#3822 - SplFileObject::fread example
• Example#3823 - SplFileObject::fscanf example
• Example#3824 - SplFileObject::fseek example
• Example#3825 - SplFileObject::fstat example
• Example#3826 - SplFileObject::ftell example
• Example#3827 - SplFileObject::ftruncate example
• Example#3828 - SplFileObject::fwrite example
• Example#3829 - SplFileObject::getCsvControl example
• Example#3830 - SplFileObject::getFlags example
• Example#3831 - SplFileObject::getMaxLineLen example
• Example#3832 - SplFileObject::key example
• Example#3833 - SplFileObject::key example with SplFileObject::setMaxLineLen
• Example#3834 - SplFileObject::next example
• Example#3835 - SplFileObject::rewind example
• Example#3836 - SplFileObject::seek example
• Example#3837 - SplFileObject::setCsvControl example
• Example#3838 - SplFileObject::setFlags example
• Example#3839 - SplFileObject::setMaxLineLen example
• Example#3840 - SplFileObject::valid example
• Example#3841 - SplTempFileObject example
• Example#3842 - ArrayObject::append 例子
• Example#3843 - ArrayObject::asort example
• Example#3844 - ArrayObject::__construct example
• Example#3845 - ArrayObject::count 例子
• Example#3846 - ArrayObject::exchangeArray example
• Example#3847 - ArrayObject::getArrayCopy example
• Example#3848 - ArrayObject::getFlags example
• Example#3849 - ArrayObject::getIterator example
• Example#3850 - ArrayObject::getIteratorClass example
• Example#3851 - ArrayObject::ksort example
• Example#3852 - ArrayObject::natcasesort example
• Example#3853 - ArrayObject::natsort example
• Example#3854 - ArrayObject::offsetExists example
• Example#3855 - ArrayObject::offsetGet example
• Example#3856 - ArrayObject::offsetSet 例子
• Example#3857 - ArrayObject::offsetUnset example
• Example#3858 - ArrayObject::serialize example
• Example#3859 - ArrayObject::setFlags example
• Example#3860 - ArrayObject::setIteratorClass example
• Example#3861 - ArrayObject::uasort example
• Example#3862 - ArrayObject::uksort example
• Example#3863 - 使用 file_get_contents 从多个来源检索数据
• Example#3864 - 向 https 服务器发出 POST 请求
• Example#3865 - 将数据写入压缩文件
• Example#3866 - 用于读写全局变量的流
• Example#3867 - Listing files from tar archives
• Example#3868 - stream_bucket_prepend examples
• Example#3869 - 使用 stream_context_create
• Example#3870 - Using stream_context_get_default
• Example#3871 - stream_context_get_options 的例子
• Example#3872 - stream_context_get_params example
• Example#3873 - stream_context_set_default example
• Example#3874 - stream_context_set_options example
• Example#3875 - A stream_copy_to_stream example
• Example#3876 - Controlling where filters are applied
• Example#3877 - Filter for capitalizing characters on foo-bar.txt stream
• Example#3878 - Registering a generic filter class to match multiple filter names.
• Example#3879 - 动态地重新过滤一个资源流
• Example#3880 - stream_get_contents 例子
• Example#3881 - 使用 stream_get_filters
• Example#3882 - stream_get_meta_data 示例，fopen 和 http 一起使用
• Example#3883 - stream_get_meta_data 示例，stream_socket_client 和 https 一起使用
• Example#3884 - 使用 stream_get_transports
• Example#3885 - stream_get_wrappers 例子
• Example#3886 - 检查一个流类型是否存在
• Example#3887 - stream_is_local example
• Example#3888 - stream_isatty example
• Example#3889 - stream_notification_callback example
• Example#3890 - Simple progressbar for commandline download client
• Example#3891 - stream_resolve_include_path example
• Example#3892 - stream_select Example
• Example#3893 - stream_set_timeout example
• Example#3894 - stream_set_write_buffer example
• Example#3895 - stream_socket_client example
• Example#3896 - Using UDP connection
• Example#3897 - stream_socket_enable_crypto example
• Example#3898 - stream_socket_pair 例子
• Example#3899 - stream_socket_recvfrom example
• Example#3900 - stream_socket_sendto Example
• Example#3901 - 使用 TCP 服务器套接字
• Example#3902 - 使用 UDP 服务器套接字
• Example#3903 - A stream_socket_shutdown example
• Example#3904 - 如何注册一个 stream wrapper
• Example#3905 - Basic Tidy usage
• Example#3906 - tidy::getBody example
• Example#3907 - tidy::cleanrepair example
• Example#3908 - tidy::__construct example
• Example#3909 - tidy::diagnose example
• Example#3910 - tidy_get_error_buffer example
• Example#3911 - tidy::getConfig example
• Example#3912 - tidy_getopt example
• Example#3913 - Print all options along with their documentation and default value
• Example#3914 - tidy::getStatus example
• Example#3915 - tidy::head example
• Example#3916 - tidy::html example
• Example#3917 - tidy::parseFile example
• Example#3918 - tidy::parseString example
• Example#3919 - tidy::repairFile example
• Example#3920 - tidy::repairString example
• Example#3921 - tidy::root example
• Example#3922 - tidyNode::getNextSibling example
• Example#3923 - tidyNode::getParent example
• Example#3924 - tidyNode::getPreviousSibling example
• Example#3925 - tidyNode::hasChildren example
• Example#3926 - tidyNode::hasSiblings example
• Example#3927 - Extract ASP code from a mixed HTML document
• Example#3928 - Extract comments from a mixed HTML document
• Example#3929 - Extract HTML code from a mixed HTML document
• Example#3930 - Extract JSTE code from a mixed HTML document
• Example#3931 - Extract PHP code from a mixed HTML document
• Example#3932 - Extract text from a mixed HTML document
• Example#3933 - ob_tidyhandler example
• Example#3934 - tidy_access_count example
• Example#3935 - tidy_config_count example
• Example#3936 - tidy_error_count example
• Example#3937 - tidy_get_output example
• Example#3938 - tidy_warning_count example
• Example#3939 - 使用 tokenizer 去除注释
• Example#3940 - PhpToken::getTokenName example
• Example#3941 - PhpToken::is example
• Example#3942 - Usage with array
• Example#3943 - PhpToken::isIgnorable example
• Example#3944 - PhpToken::__toString example
• Example#3945 - PhpToken::tokenize example
• Example#3946 - Extending PhpToken
• Example#3947 - token_get_all 示例
• Example#3948 - token_get_all 错误用法示例
• Example#3949 - token_get_all 在类上使用关键词示例
• Example#3950 - token_name 示例
• Example#3951 - base64_decode 示例
• Example#3952 - base64_encode 示例
• Example#3953 - get_headers 例子
• Example#3954 - get_headers 使用 HEAD 示例
• Example#3955 - get_meta_tags 解析了什么
• Example#3956 - get_meta_tags 返回了什么
• Example#3957 - http_build_query 使用示例
• Example#3958 - http_build_query 使用数字下标的元素
• Example#3959 - http_build_query 使用复杂的数组
• Example#3960 - http_build_query 使用对象
• Example#3961 - parse_url 示例
• Example#3962 - parse_url 解析丢失协议的示例
• Example#3963 - rawurldecode 示例
• Example#3964 - 在 FTP URL 里包含一个密码
• Example#3965 - rawurlencode 示例 2
• Example#3966 - urldecode 示例
• Example#3967 - urlencode 例子
• Example#3968 - urlencode 与 htmlentities 例子
• Example#3969 - Basic Javascript execution
• Example#3970 - Yaml 范例
• Example#3971 - Parse callback example
• Example#3972 - Emit callback example
• Example#3973 - yaml_emit example
• Example#3974 - yaml_parse example
• Example#3975 - 一个典型的应用目录结构
• Example#3976 - 入口文件
• Example#3977 - 重写规则
• Example#3978 - 应用配置文件
• Example#3979 - 默认控制器
• Example#3980 - 默认视图文件
• Example#3981 - 运行应用
• Example#3982 - PHP 数组示例
• Example#3983 - ini 文件示例
• Example#3984 - Bootstrap 示例
• Example#3985 - Yaf_Application::bootstrap 示例
• Example#3986 - Yaf_Application::clearLastError 示例
• Example#3987 - A ini config file example
• Example#3988 - Yaf_Application::__construct 示例
• Example#3989 - Yaf_Application::__construct 示例
• Example#3990 - Yaf_Application::environ 示例
• Example#3991 - Yaf_Application::execute 示例
• Example#3992 - Yaf_Application::getConfig 示例
• Example#3993 - Yaf_Application::getDispatcher 示例
• Example#3994 - Yaf_Application::getLastErrorMsg 示例
• Example#3995 - Yaf_Application::getLastErrorNo 示例
• Example#3996 - Yaf_Application::getModules 示例
• Example#3997 - Bootstrap 示例
• Example#3998 - Yaf_Dispatcher::autoRender 示例
• Example#3999 - Yaf_Dispatcher::catchException 示例
• Example#4000 - Yaf_Dispatcher::registerPlugin 示例
• Example#4001 - 自定义视图引擎示例
• Example#4002 - Yaf_Dispatcher::setView 示例
• Example#4003 - Yaf_Dispatcher::throwexception 示例
• Example#4004 - Yaf_Dispatcher::throwexception 示例
• Example#4005 - Yaf_Config_Ini 示例
• Example#4006 - 在单独的文件中定义 action
• Example#4007 - Dummy_action.php
• Example#4008 - Yaf_Controller_Abstract::forward 示例
• Example#4009 - Yaf_Action_Abstract::execute 示例
• Example#4010 - Yaf_Action_Abstract::execute 示例
• Example#4011 - Yaf_View_Simple::assign 示例
• Example#4012 - templateexample
• Example#4013 - Yaf_View_Simple::assignRef 示例
• Example#4014 - templateexample
• Example#4015 - Yaf_View_Simple::clear 示例
• Example#4016 - Yaf_View_Simple::__constructor 示例
• Example#4017 - Yaf_View_Simple::__set 示例
• Example#4018 - Config example
• Example#4019 - 注册本地命名空间
• Example#4020 - 加载类示例
• Example#4021 - 加载命名空间类示例
• Example#4022 - MVC 类加载示例
• Example#4023 - MVC 类区别
• Example#4024 - MVC 加载示例
• Example#4025 - Yaf_Loader::registerNamespaceexample
• Example#4026 - Yaf_Loader::registerLocalNamespace 示例
• Example#4027 - Yaf_Loader::registerNamespaceexample
• Example#4028 - 插件示例
• Example#4029 - Yaf_Plugin_Abstract::routerShutdown 示例
• Example#4030 - Yaf_Response_Abstract::appendBody 示例
• Example#4031 - Yaf_Response_Abstract::getBody 示例
• Example#4032 - Yaf_Response_Abstract::prependBody 示例
• Example#4033 - Yaf_Response_Abstract::response 示例
• Example#4034 - Yaf_Response_Abstract::setBody 示例
• Example#4035 - Yaf_Route_Map::assemble 示例
• Example#4036 - Yaf_Route_Map 示例
• Example#4037 - Yaf_Route_Map 示例
• Example#4038 - Yaf_Route_Map 示例
• Example#4039 - Yaf_Route_Regex::assemble 示例
• Example#4040 - Yaf_Route_Regex 示例
• Example#4041 - Yaf_Route_Regex（从 2.3.0 起）示例
• Example#4042 - Yaf_Route_Regex 和命名捕获组（从 2.3.0 起）示例
• Example#4043 - Yaf_Route_Regex 示例
• Example#4044 - Yaf_Route_Rewrite::assemble 示例
• Example#4045 - Yaf_Route_Rewrite 示例
• Example#4046 - Yaf_Route_Rewrite 示例
• Example#4047 - Yaf_Route_Rewrite（自 2.3.0 起）示例
• Example#4048 - Apache 重写规则
• Example#4049 - Apache 重写规则
• Example#4050 - Lighttpd 重写规则
• Example#4051 - Nginx 重写规则
• Example#4052 - Yaf_Route_Static（默认路由）示例
• Example#4053 - application.ini 示例
• Example#4054 - Yaf_Dispatcher::autoConfig 示例
• Example#4055 - Yaf_Dispatcher::autoRender 示例
• Example#4056 - 注册一些路由到 Bootstrap
• Example#4057 - plugin Dummy.php (under application.directory/plugins)
• Example#4058 - Yaf_Route_Simple::assemble 示例
• Example#4059 - Yaf_Route_Simple::route 示例
• Example#4060 - Yaf_Route_Simple::routeexample
• Example#4061 - Yaf_Route_Static::assemble 示例
• Example#4062 - Yaf_Route_Static::routeexample
• Example#4063 - Yaf_Route_Supervar::assemble 示例
• Example#4064 - Yaf_Route_Supervar 示例
• Example#4065 - INI example
• Example#4066 - INI sections example
• Example#4067 - INIexample
• Example#4068 - Taintexample
• Example#4069 - Vector
• Example#4070 - Map
• Example#4071 - Ds\Collection::clear example
• Example#4072 - Ds\Collection::copy example
• Example#4073 - Ds\Collection::isEmpty example
• Example#4074 - Ds\Collection::toArray example
• Example#4075 - Ds\Hashable::hash example
• Example#4076 - Ds\Sequence::allocate example
• Example#4077 - Ds\Sequence::apply example
• Example#4078 - Ds\Sequence::capacity example
• Example#4079 - Ds\Sequence::contains example
• Example#4080 - Ds\Sequence::filter example using callback function
• Example#4081 - Ds\Sequence::filter example without a callback function
• Example#4082 - Ds\Sequence::find example
• Example#4083 - Ds\Sequence::first example
• Example#4084 - Ds\Sequence::get example
• Example#4085 - Ds\Sequence::get example using array syntax
• Example#4086 - Ds\Sequence::insert example
• Example#4087 - Ds\Sequence::join example using a separator string
• Example#4088 - Ds\Sequence::join example without a separator string
• Example#4089 - Ds\Sequence::last example
• Example#4090 - Ds\Sequence::map example
• Example#4091 - Ds\Sequence::merge example
• Example#4092 - Ds\Sequence::pop example
• Example#4093 - Ds\Sequence::push example
• Example#4094 - Ds\Sequence::reduce with initial value example
• Example#4095 - Ds\Sequence::reduce without an initial value example
• Example#4096 - Ds\Sequence::remove example
• Example#4097 - Ds\Sequence::reverse example
• Example#4098 - Ds\Sequence::reversed example
• Example#4099 - Ds\Sequence::rotate example
• Example#4100 - Ds\Sequence::set example
• Example#4101 - Ds\Sequence::set example using array syntax
• Example#4102 - Ds\Sequence::shift example
• Example#4103 - Ds\Sequence::slice example
• Example#4104 - Ds\Sequence::sort example
• Example#4105 - Ds\Sequence::sort example using a comparator
• Example#4106 - Ds\Sequence::sorted example
• Example#4107 - Ds\Sequence::sorted example using a comparator
• Example#4108 - Ds\Sequence::sum integer example
• Example#4109 - Ds\Sequence::sum float example
• Example#4110 - Ds\Sequence::unshift example
• Example#4111 - Ds\Vector::allocate example
• Example#4112 - Ds\Vector::apply example
• Example#4113 - Ds\Vector::capacity example
• Example#4114 - Ds\Vector::clear example
• Example#4115 - Ds\Vector::__construct example
• Example#4116 - Ds\Vector::contains example
• Example#4117 - Ds\Vector::copy example
• Example#4118 - Ds\Vector::filter example using callback function
• Example#4119 - Ds\Vector::filter example without a callback function
• Example#4120 - Ds\Vector::find example
• Example#4121 - Ds\Vector::first example
• Example#4122 - Ds\Vector::get example
• Example#4123 - Ds\Vector::get example using array syntax
• Example#4124 - Ds\Vector::insert example
• Example#4125 - Ds\Vector::isEmpty example
• Example#4126 - Ds\Vector::join example using a separator string
• Example#4127 - Ds\Vector::join example without a separator string
• Example#4128 - Ds\Vector::last example
• Example#4129 - Ds\Vector::map example
• Example#4130 - Ds\Vector::merge example
• Example#4131 - Ds\Vector::pop example
• Example#4132 - Ds\Vector::push example
• Example#4133 - Ds\Vector::reduce with initial value example
• Example#4134 - Ds\Vector::reduce without an initial value example
• Example#4135 - Ds\Vector::remove example
• Example#4136 - Ds\Vector::reverse example
• Example#4137 - Ds\Vector::reversed example
• Example#4138 - Ds\Vector::rotate example
• Example#4139 - Ds\Vector::set example
• Example#4140 - Ds\Vector::set example using array syntax
• Example#4141 - Ds\Vector::shift example
• Example#4142 - Ds\Vector::slice example
• Example#4143 - Ds\Vector::sort example
• Example#4144 - Ds\Vector::sort example using a comparator
• Example#4145 - Ds\Vector::sorted example
• Example#4146 - Ds\Vector::sorted example using a comparator
• Example#4147 - Ds\Vector::sum integer example
• Example#4148 - Ds\Vector::sum float example
• Example#4149 - Ds\Vector::toArray example
• Example#4150 - Ds\Vector::unshift example
• Example#4151 - Ds\Deque::allocate example
• Example#4152 - Ds\Deque::apply example
• Example#4153 - Ds\Deque::capacity example
• Example#4154 - Ds\Deque::clear example
• Example#4155 - Ds\Deque::__construct example
• Example#4156 - Ds\Deque::contains example
• Example#4157 - Ds\Deque::copy example
• Example#4158 - Ds\Deque::filter example using callback function
• Example#4159 - Ds\Deque::filter example without a callback function
• Example#4160 - Ds\Deque::find example
• Example#4161 - Ds\Deque::first example
• Example#4162 - Ds\Deque::get example
• Example#4163 - Ds\Deque::get example using array syntax
• Example#4164 - Ds\Deque::insert example
• Example#4165 - Ds\Deque::isEmpty example
• Example#4166 - Ds\Deque::join example using a separator string
• Example#4167 - Ds\Deque::join example without a separator string
• Example#4168 - Ds\Deque::last example
• Example#4169 - Ds\Deque::map example
• Example#4170 - Ds\Deque::merge example
• Example#4171 - Ds\Deque::pop example
• Example#4172 - Ds\Deque::push example
• Example#4173 - Ds\Deque::reduce with initial value example
• Example#4174 - Ds\Deque::reduce without an initial value example
• Example#4175 - Ds\Deque::remove example
• Example#4176 - Ds\Deque::reverse example
• Example#4177 - Ds\Deque::reversed example
• Example#4178 - Ds\Deque::rotate example
• Example#4179 - Ds\Deque::set example
• Example#4180 - Ds\Deque::set example using array syntax
• Example#4181 - Ds\Deque::shift example
• Example#4182 - Ds\Deque::slice example
• Example#4183 - Ds\Deque::sort example
• Example#4184 - Ds\Deque::sort example using a comparator
• Example#4185 - Ds\Deque::sorted example
• Example#4186 - Ds\Deque::sorted example using a comparator
• Example#4187 - Ds\Deque::sum integer example
• Example#4188 - Ds\Deque::sum float example
• Example#4189 - Ds\Deque::toArray example
• Example#4190 - Ds\Deque::unshift example
• Example#4191 - Ds\Map::allocate example
• Example#4192 - Ds\Map::apply example
• Example#4193 - Ds\Map::capacity example
• Example#4194 - Ds\Map::clear example
• Example#4195 - Ds\Map::__construct example
• Example#4196 - Ds\Map::copy example
• Example#4197 - Ds\Map::diff example
• Example#4198 - Ds\Map::filter example using callback function
• Example#4199 - Ds\Map::filter example without a callback function
• Example#4200 - Ds\Map::first example
• Example#4201 - Ds\Map::get example
• Example#4202 - Ds\Map::get example using array syntax
• Example#4203 - Ds\Map::hasKey example
• Example#4204 - Ds\Map::hasValue example
• Example#4205 - Ds\Map::intersect example
• Example#4206 - Ds\Map::isEmpty example
• Example#4207 - Ds\Map::keys example
• Example#4208 - Ds\Map::ksort example
• Example#4209 - Ds\Map::ksort example using a comparator
• Example#4210 - Ds\Map::ksorted example
• Example#4211 - Ds\Map::ksorted example using a comparator
• Example#4212 - Ds\Map::last example
• Example#4213 - Ds\Map::map example
• Example#4214 - Ds\Map::merge example
• Example#4215 - Ds\Map::pairs example
• Example#4216 - Ds\Map::put example
• Example#4217 - Ds\Map::put example using objects as keys
• Example#4218 - Ds\Map::putAll example
• Example#4219 - Ds\Map::reduce with initial value example
• Example#4220 - Ds\Map::reduce without an initial value example
• Example#4221 - Ds\Map::remove example
• Example#4222 - Ds\Map::reverse example
• Example#4223 - Ds\Map::reversed example
• Example#4224 - Ds\Map::skip example
• Example#4225 - Ds\Map::slice example
• Example#4226 - Ds\Map::sort example
• Example#4227 - Ds\Map::sort example using a comparator
• Example#4228 - Ds\Map::sort example
• Example#4229 - Ds\Map::sort example using a comparator
• Example#4230 - Ds\Map::sum integer example
• Example#4231 - Ds\Map::sum float example
• Example#4232 - Ds\Map::toArray example
• Example#4233 - Ds\Map::union example
• Example#4234 - Ds\Map::values example
• Example#4235 - Ds\Map::xor example
• Example#4236 - Ds\Pair::clear example
• Example#4237 - Ds\Pair::copy example
• Example#4238 - Ds\Pair::isEmpty example
• Example#4239 - Ds\Pair::toArray example
• Example#4240 - Ds\Set::add example using integers
• Example#4241 - Ds\Set::add example using objects
• Example#4242 - Ds\Set::allocate example
• Example#4243 - Ds\Set::capacity example
• Example#4244 - Ds\Set::clear example
• Example#4245 - Ds\Set::__construct example
• Example#4246 - Ds\Set::contains example
• Example#4247 - Ds\Set::copy example
• Example#4248 - Ds\Set::diff example
• Example#4249 - Ds\Set::filter example using callback function
• Example#4250 - Ds\Set::filter example without a callback function
• Example#4251 - Ds\Set::first example
• Example#4252 - Ds\Set::get example
• Example#4253 - Ds\Set::get example using array syntax
• Example#4254 - Ds\Set::intersect example
• Example#4255 - Ds\Set::isEmpty example
• Example#4256 - Ds\Set::join example using a separator string
• Example#4257 - Ds\Set::join example without a separator string
• Example#4258 - Ds\Set::last example
• Example#4259 - Ds\Set::map example
• Example#4260 - Ds\Set::merge example
• Example#4261 - Ds\Set::reduce with initial value example
• Example#4262 - Ds\Set::reduce without an initial value example
• Example#4263 - Ds\Set::remove example
• Example#4264 - Ds\Set::reverse example
• Example#4265 - Ds\Set::reversed example
• Example#4266 - Ds\Set::slice example
• Example#4267 - Ds\Set::sort example
• Example#4268 - Ds\Set::sort example using a comparator
• Example#4269 - Ds\Set::sorted example
• Example#4270 - Ds\Set::sorted example using a comparator
• Example#4271 - Ds\Set::sum integer example
• Example#4272 - Ds\Set::sum float example
• Example#4273 - Ds\Set::toArray example
• Example#4274 - Ds\Set::union example
• Example#4275 - Ds\Set::xor example
• Example#4276 - Ds\Stack::clear example
• Example#4277 - Ds\Stack::__construct example
• Example#4278 - Ds\Stack::copy example
• Example#4279 - Ds\Stack::isEmpty example
• Example#4280 - Ds\Stack::peek example
• Example#4281 - Ds\Stack::pop example
• Example#4282 - Ds\Stack::push example
• Example#4283 - Ds\Stack::toArray example
• Example#4284 - Ds\Queue::allocate example
• Example#4285 - Ds\Queue::capacity example
• Example#4286 - Ds\Queue::clear example
• Example#4287 - Ds\Queue::__construct example
• Example#4288 - Ds\Queue::copy example
• Example#4289 - Ds\Queue::isEmpty example
• Example#4290 - Ds\Queue::peek example
• Example#4291 - Ds\Queue::pop example
• Example#4292 - Ds\Queue::push example
• Example#4293 - Ds\Queue::toArray example
• Example#4294 - Ds\PriorityQueue::allocate example
• Example#4295 - Ds\PriorityQueue::capacity example
• Example#4296 - Ds\PriorityQueue::clear example
• Example#4297 - Ds\PriorityQueue::__construct example
• Example#4298 - Ds\PriorityQueue::copy example
• Example#4299 - Ds\PriorityQueue::isEmpty example
• Example#4300 - Ds\PriorityQueue::peek example
• Example#4301 - Ds\PriorityQueue::pop example
• Example#4302 - Ds\PriorityQueue::push example
• Example#4303 - Ds\PriorityQueue::toArray example
• Example#4304 - var_representation Examples
• Example#4305 - Escaping control characters
• Example#4306 - Exporting stdClass
• Example#4307 - Exporting classes
• Example#4308 - Using __set_state()
• Example#4309 - 使用 PHP cURL 模块获取 example.com 的主页
• Example#4310 - 初始化新 cURL 会话并获取网页
• Example#4311 - 复制 cURL 句柄
• Example#4312 - curl_errno 示例
• Example#4313 - curl_error 示例
• Example#4314 - curl_escape 示例
• Example#4315 - 获取网页
• Example#4316 - curl_getinfo 示例
• Example#4317 - 使用 option 参数的 curl_getinfo 示例
• Example#4318 - 初始化新 cURL 会话并获取网页
• Example#4319 - curl_multi_close 示例
• Example#4320 - curl_multi_exec 示例
• Example#4321 - curl_reset 示例
• Example#4322 - 初始化一个新的cURL会话并获取一个网页
• Example#4323 - 初始化新的 cURL 会话并抓取 web 页面
• Example#4324 - curl_share_setopt 示例
• Example#4325 - curl_share_init 示例
• Example#4326 - curl_share_setopt 示例
• Example#4327 - curl_errno 示例
• Example#4328 - curl_escape 示例
• Example#4329 - curl_upkeep example
• Example#4330 - curl_version 示例
• Example#4331 - CURLFile::__construct 示例
• Example#4332 - CURLFile::__construct 上传多文件示例
• Example#4333 - CURLStringFile::__construct 示例
• Example#4334 - 简单的 HTTP 客户端
• Example#4335 - 使用异步 DNS 解析器的 HTTP 客户端
• Example#4336 - Echo 服务器
• Example#4337 - SSL echo 服务器
• Example#4338 - 信号处理程序
• Example#4339 - 使用 libevent 的循环处理 `eio` 扩展的请求
• Example#4340 - 杂项
• Example#4341 - 简单的 HTTP 服务器
• Example#4342 - 简单的 HTTPS 服务器
• Example#4343 - OpenSSL 连接
• Example#4344 - EventHttpConnection::makeRequest 示例
• Example#4345 - 基于 UNIX 域套接字的连接监听器
• Example#4346 - 简单 SMTP 服务器
• Example#4347 - Handling SIGTERM signal
• Example#4348 - Adding a custom signal
• Example#4349 - Adding a timer
• Example#4350 - EventBase::getFeatures example
• Example#4351 - EventBase::getMethod example
• Example#4352 - EventBuffer::search example
• Example#4353 - EventBufferEvent::connect example
• Example#4354 - Connect to UNIX domain socket which presumably is served by a server, read response from the server and output it to the console
• Example#4355 - EventBufferEvent::connectHost example
• Example#4356 - Buffer event's read callback
• Example#4357 - EventBufferEvent::getOutput example
• Example#4358 - EventBufferEvent::sslError example
• Example#4359 - 简单 SMTP 服务器
• Example#4360 - EventConfig::avoidMethod 示例
• Example#4361 - EventConfig::__construct 示例
• Example#4362 - EventConfig::requireFeatures 示例
• Example#4363 - EventHttp::accept example
• Example#4364 - EventHttp::addServerAlias example
• Example#4365 - EventHttp::bind example
• Example#4366 - Simple HTTP server
• Example#4367 - EventHttp::setCallback example
• Example#4368 - EventHttp::setDefaultCallback example
• Example#4369 - EventHttpConnection::makeRequest example
• Example#4370 - EventHttpConnection::setCloseCallback example
• Example#4371 - EventHttpRequest::__construct example
• Example#4372 - EventHttpRequest::sendError example
• Example#4373 - EventListener::__construct example
• Example#4374 - EventSslContext::__construct example
• Example#4375 - FTP 示例
• Example#4376 - ftp_alloc 示例
• Example#4377 - ftp_cdup 例子
• Example#4378 - ftp_chdir 例子
• Example#4379 - ftp_chmod 示例
• Example#4380 - ftp_close 示例
• Example#4381 - ftp_connect 示例
• Example#4382 - ftp_delete 示例
• Example#4383 - ftp_exec 示例
• Example#4384 - ftp_fget 示例
• Example#4385 - ftp_fput 示例
• Example#4386 - ftp_get 示例
• Example#4387 - ftp_get_option 示例
• Example#4388 - ftp_login 示例
• Example#4389 - ftp_mdtm 示例
• Example#4390 - ftp_mkdir 示例
• Example#4391 - ftp_mlsd 示例
• Example#4392 - ftp_nb_continue 示例
• Example#4393 - ftp_nb_fget 函数示例
• Example#4394 - ftp_nb_fput 函数示例
• Example#4395 - ftp_nb_get 示例
• Example#4396 - 通过 ftp_nb_get 恢复下载一个文件
• Example#4397 - 使用 ftp_nb_get 从指定位置恢复下载文件
• Example#4398 - ftp_nb_put 示例
• Example#4399 - 使用 ftp_nb_put 来续传文件
• Example#4400 - ftp_nlist 示例
• Example#4401 - ftp_pasv 示例
• Example#4402 - ftp_put 实例
• Example#4403 - ftp_pwd 示例
• Example#4404 - 使用 ftp_raw 登录远程 FTP 服务器
• Example#4405 - ftp_rawlist 示例
• Example#4406 - ftp_rename 例子
• Example#4407 - ftp_rmdir 示例
• Example#4408 - ftp_set_option 示例
• Example#4409 - 向 FTP 服务器发送 SITE 命令
• Example#4410 - ftp_size 示例
• Example#4411 - ftp_ssl_connect 函数示例
• Example#4412 - ftp_systype 示例
• Example#4413 - Basic Gearman client and worker
• Example#4414 - Basic Gearman client and worker, background
• Example#4415 - Basic Gearman client and worker, submitting tasks
• Example#4416 - Adding two job servers
• Example#4417 - Add two job servers
• Example#4418 - Basic submission of two tasks
• Example#4419 - Basic submission of two tasks with passing application context
• Example#4420 - Two tasks, one background and one not
• Example#4421 - A high priority task along with two normal tasks
• Example#4422 - A low priority task along with two normal tasks
• Example#4423 - Monitor completion of multiple background tasks
• Example#4424 - Simple job submission with immediate return
• Example#4425 - Submitting a job and retrieving incremental status
• Example#4426 - Submit and monitor a background job
• Example#4427 - Simple job submission with immediate return
• Example#4428 - Submitting a job and retrieving incremental status
• Example#4429 - Get the status of a long running job
• Example#4430 - Monitor the status of a long running background job
• Example#4431 - Simple worker making use of extra application context data
• Example#4432 - Add alternate Gearman servers
• Example#4433 - Add two job servers
• Example#4434 - GearmanWorker::setId example
• Example#4435 - A simple worker with a 5 second timeout
• Example#4436 - Running worker in non-blocking mode
• Example#4437 - GearmanWorker::work example
• Example#4438 - Testing support for paged result control
• Example#4439 - LDAP search example
• Example#4440 - Bind with policy information
• Example#4441 - Modify description only if it's not empty
• Example#4442 - Read some values before deletion
• Example#4443 - Delete a reference
• Example#4444 - Use pagination for a search
• Example#4445 - Complete example with authenticated bind
• Example#4446 - 使用 LDAP Bind
• Example#4447 - Using LDAP Bind Anonymously
• Example#4448 - Complete example of password check
• Example#4449 - Example of connecting to LDAP server.
• Example#4450 - Example of connecting securely to LDAP server.
• Example#4451 - LDAP pagination
• Example#4452 - LDAP pagination
• Example#4453 - ldap_count_entries example
• Example#4454 - Enumerating all LDAP error messages
• Example#4455 - Generating and catching an error
• Example#4456 - Searching for an email address
• Example#4457 - Whoami extended operation
• Example#4458 - PASSWD extended operation
• Example#4459 - Show the list of attributes held for a particular directory entry
• Example#4460 - Check protocol version
• Example#4461 - List all values of the "mail" attribute for a directory entry
• Example#4462 - Produce a list of all organizational units of an organization
• Example#4463 - Add a telephone number to a contact
• Example#4464 - Rename a user
• Example#4465 - Add two e-mail addresses to a user
• Example#4466 - Change a user's password
• Example#4467 - Change a user's password (Active Directory)
• Example#4468 - ldap_parse_result example
• Example#4469 - LDAP search
• Example#4470 - Set protocol version
• Example#4471 - Set server controls
• Example#4472 - LDAP sort
• Example#4473 - memcache 扩展概述示例
• Example#4474 - 使用 memcache session 处理程序
• Example#4475 - Memcache::add示例
• Example#4476 - Memcache::addServer 示例
• Example#4477 - Memcache::close示例
• Example#4478 - Memcache::connect example
• Example#4479 - Memcache::decrement example
• Example#4480 - Memcache::delete 示例
• Example#4481 - Memcache::flush示例
• Example#4482 - Memcache::get 示例
• Example#4483 - Memcache::getExtendedStats 示例
• Example#4484 - Memcache::getServerStatus 示例
• Example#4485 - Memcache::getVersion 示例
• Example#4486 - Memcache::increment 示例
• Example#4487 - Memcache::pconnect 示例
• Example#4488 - Memcache::replace 示例
• Example#4489 - Memcache::set 示例
• Example#4490 - Memcache::set 示例
• Example#4491 - Memcache::setCompressThreshold 示例
• Example#4492 - Memcache::setServerParams 示例
• Example#4493 - 结果回调示例
• Example#4494 - 通读回调示例
• Example#4495 - Memcached::addServer 示例
• Example#4496 - Memcached::addServers 示例
• Example#4497 - Memcached::append 示例
• Example#4498 - Memcached::cas 示例
• Example#4499 - 创建 Memcached 对象
• Example#4500 - Memcached::decrement 示例
• Example#4501 - Memcached::delete 示例
• Example#4502 - Memcached::fetch 示例
• Example#4503 - Memcached::getDelayed 示例
• Example#4504 - Memcached::flush 示例
• Example#4505 - Memcached::get 示例
• Example#4506 - Memcached::get 示例
• Example#4507 - Memcached::getDelayed 示例
• Example#4508 - Memcached::getMulti 的 Memcached v3 示例
• Example#4509 - Memcached::getMulti 的 Memcached v1 和 v2 示例
• Example#4510 - Memcached::GET_PRESERVE_ORDER 的 Memcached v3 示例
• Example#4511 - Memcached::GET_PRESERVE_ORDER 的 Memcached v1 和 v2 示例
• Example#4512 - 获取 Memcached 选项
• Example#4513 - Memcached::getResultCode 示例
• Example#4514 - Memcached::getResultMessage 示例
• Example#4515 - Memcached::getServerByKey 示例
• Example#4516 - Memcached::getServerList 示例
• Example#4517 - Memcached::getStats 示例
• Example#4518 - Memcached::getVersion 示例
• Example#4519 - Memcached::increment 示例
• Example#4520 - Memcached::prepend 示例
• Example#4521 - Memcached::set 示例
• Example#4522 - Memcached::setByKey 示例
• Example#4523 - Memcached::setMulti 示例
• Example#4524 - 设置一个 memcached 选项值
• Example#4525 - Setting Memcached options
• Example#4526 - mqseries_back example
• Example#4527 - mqseries_begin example
• Example#4528 - mqseries_close example
• Example#4529 - mqseries_cmit example
• Example#4530 - mqseries_conn example
• Example#4531 - mqseries_connx example
• Example#4532 - mqseries_connx example using SSL connection & OCSP Responder URL
• Example#4533 - mqseries_disc example
• Example#4534 - mqseries_get example
• Example#4535 - mqseries_inq example
• Example#4536 - mqseries_open example
• Example#4537 - mqseries_put example
• Example#4538 - mqseries_strerror example
• Example#4539 - 使用 dns_get_record
• Example#4540 - 使用 dns_get_record 和 DNS_ANY
• Example#4541 - fsockopen 示例
• Example#4542 - 使用 UDP 连接
• Example#4543 - gethostbyaddr 的简单例子
• Example#4544 - 简单的 gethostbyname 例子
• Example#4545 - gethostbynamel 例子
• Example#4546 - 简单的 gethostname 例子
• Example#4547 - getprotobyname example
• Example#4548 - getservbyname 例子
• Example#4549 - 下载对话框
• Example#4550 - 缓存指令
• Example#4551 - 设置一个 Cookie
• Example#4552 - header_register_callback 例子
• Example#4553 - 取消指定的头
• Example#4554 - 取消之前全部指定的头
• Example#4555 - 使用 headers_list 的例子
• Example#4556 - 使用 headers_sent 的例子
• Example#4557 - http_get_last_response_headers example
• Example#4558 - Web 服务器环境内使用 http_response_code
• Example#4559 - 在 CLI 环境内使用 http_response_code
• Example#4560 - inet_ntop Example
• Example#4561 - inet_pton Example
• Example#4562 - ip2long 例子
• Example#4563 - 显示 IP 地址
• Example#4564 - setcookie 发送示例
• Example#4565 - setcookie 删除示例
• Example#4566 - setcookie 和数组
• Example#4567 - Using syslog
• Example#4568 - Procedural usage of rrd
• Example#4569 - OO usage of rrd
• Example#4570 - RRDGraph::setOptions example
• Example#4571 - Set multiple color options
• Example#4572 - RRDUpdater::update examples
• Example#4573 - Fetch instrumented calls
• Example#4574 - Fetch the list of functions scoutapm will instrument
• Example#4575 - snmp_get_quick_print 示例
• Example#4576 - Using snmp_get_valueretrieval
• Example#4577 - Using snmp_read_mib
• Example#4578 - Using snmp_set_enum_print
• Example#4579 - Using snmprealwalk
• Example#4580 - 使用 snmp_set_quick_print
• Example#4581 - Using snmp_set_valueretrieval
• Example#4582 - Using snmp2_get
• Example#4583 - Using snmp2_get_next
• Example#4584 - Using snmp2_real_walk
• Example#4585 - Using snmp2_set
• Example#4586 - Using snmp2_set for setting BITS SNMP object id
• Example#4587 - snmp2_walk Example
• Example#4588 - Using snmp3_get
• Example#4589 - Using snmp3_getnext
• Example#4590 - Using snmp3_real_walk
• Example#4591 - Using snmp3_set
• Example#4592 - Using snmp3_set for setting BITS SNMP object id
• Example#4593 - snmp3_walk Example
• Example#4594 - 使用 snmpget
• Example#4595 - Using snmpgetnext
• Example#4596 - 使用 snmprealwalk
• Example#4597 - 使用 snmpset
• Example#4598 - 使用 snmpset 设置 BITS SNMP 对象 ID
• Example#4599 - snmpwalk 示例
• Example#4600 - snmpwalkoid 示例
• Example#4601 - SNMP::close example
• Example#4602 - Fetching the physical location of the host
• Example#4603 - Single SNMP object
• Example#4604 - Multiple SNMP objects
• Example#4605 - SNMP::getErrno example
• Example#4606 - SNMP::getError example
• Example#4607 - Single SNMP object
• Example#4608 - Miltiple SNMP objects
• Example#4609 - Set single SNMP object id
• Example#4610 - Set multiple values using single SNMP::set call
• Example#4611 - Using SNMP::set for setting BITS SNMP object id
• Example#4612 - SNMP::setSecurity example
• Example#4613 - SNMP::walk example
• Example#4614 - suffixAsKey example
• Example#4615 - Socket 举例：简单的 TCP/IP 服务器
• Example#4616 - Socket 举例：简单的 TCP/IP 客户端
• Example#4617 - 使用 socket_atmark 设置源地址
• Example#4618 - 使用 socket_bind 来设置源地址
• Example#4619 - socket_create_pair 示例
• Example#4620 - socket_create_pair IPC 示例
• Example#4621 - socket_get_option 示例
• Example#4622 - socket_import_stream 示例
• Example#4623 - socket_last_error 示例
• Example#4624 - socket_recv 示例
• Example#4625 - socket_recvfrom 示例
• Example#4626 - socket_select 使用 null
• Example#4627 - 理解 socket_select 的返回值
• Example#4628 - socket_select 示例
• Example#4629 - socket_sendto 示例
• Example#4630 - socket_set_block 示例
• Example#4631 - socket_set_nonblock 示例
• Example#4632 - socket_set_option 示例
• Example#4633 - socket_strerror 示例
• Example#4634 - Authenticating with a ssh agent
• Example#4635 - Authentication using a public hostkey
• Example#4636 - Retrieving a list of authentication methods
• Example#4637 - Authenticating with a password
• Example#4638 - Authentication using a public key
• Example#4639 - ssh2_connect example
• Example#4640 - Executing a command
• Example#4641 - Opening a shell and retrieving the stderr stream associated with it
• Example#4642 - Checking the fingerprint against a known value
• Example#4643 - Determining what methods were negotiated
• Example#4644 - Adding a publickey with ssh2_publickey_add
• Example#4645 - Listing authorized keys with ssh2_publickey_list
• Example#4646 - Downloading a file via SCP
• Example#4647 - Uploading a file via SCP
• Example#4648 - Opening a file via SFTP
• Example#4649 - Changing the mode of a file on a remote server
• Example#4650 - Stating a symbolic link via SFTP
• Example#4651 - Creating a directory on a remote server
• Example#4652 - Reading a symbolic link
• Example#4653 - Resolving a pathname
• Example#4654 - Renaming a file via sftp
• Example#4655 - Removing a directory on a remote server
• Example#4656 - Stating a file via SFTP
• Example#4657 - Creating a symbolic link
• Example#4658 - Deleting a file
• Example#4659 - Requesting an interactive shell
• Example#4660 - Opening a tunnel to an arbitrary host
• Example#4661 - 面向对象风格
• Example#4662 - 过程化风格
• Example#4663 - stomp_connect_error example
• Example#4664 - stomp_version example
• Example#4665 - 面向对象风格
• Example#4666 - 过程化风格
• Example#4667 - 面向对象风格
• Example#4668 - 过程化风格
• Example#4669 - 面向对象风格
• Example#4670 - 过程化风格
• Example#4671 - 面向对象风格
• Example#4672 - 过程化风格
• Example#4673 - 面向对象风格
• Example#4674 - 过程化风格
• Example#4675 - 面向对象风格
• Example#4676 - 过程化风格
• Example#4677 - 面向对象风格
• Example#4678 - 过程化风格
• Example#4679 - 面向对象风格
• Example#4680 - 过程化风格
• Example#4681 - 面向对象风格
• Example#4682 - 过程化风格
• Example#4683 - Train from array
• Example#4684 - Train from a file
• Example#4685 - svn_add 例子
• Example#4686 - Default authentication example
• Example#4687 - svn_blame example
• Example#4688 - Basic example
• Example#4689 - Basic example
• Example#4690 - Basic example
• Example#4691 - Basic example
• Example#4692 - 基本示例
• Example#4693 - Basic example
• Example#4694 - Diffing two revisions of a repository path
• Example#4695 - Portably diffing two local files
• Example#4696 - svn_export example
• Example#4697 - Basic example
• Example#4698 - svn_log example
• Example#4699 - svn_ls example
• Example#4700 - Basic example
• Example#4701 - Basic example
• Example#4702 - Deny all connections from localhost
• Example#4703 - Ban an URL
• Example#4704 - Get statistic snapshot
• Example#4705 - Read varnish shared memory log
• Example#4706 - VarnishAdmin::__construct example
• Example#4707 - Parallel searching using Yaz
• Example#4708 - CCL configuration
• Example#4709 - CCL Parsing
• Example#4710 - Record Update
• Example#4711 - Array for GRS-1 record
• Example#4712 - Working with MARCXML
• Example#4713 - PHP function that scans titles
• Example#4714 - Query Examples
• Example#4715 - Sort Criterias
• Example#4716 - A ZMQContext example
• Example#4717 - A ZMQContext example
• Example#4718 - A ZMQContext example
• Example#4719 - A ZMQSocket example
• Example#4720 - A send/recv example
• Example#4721 - A ZMQPoll example
• Example#4722 - zookeeper_dispatch example #1
• Example#4723 - zookeeper_dispatch example #2
• Example#4724 - Zookeeper::addAuth example
• Example#4725 - Zookeeper::create example
• Example#4726 - Zookeeper::delete example
• Example#4727 - Zookeeper::exists example
• Example#4728 - Zookeeper::get example
• Example#4729 - Zookeeper::get stat example
• Example#4730 - Zookeeper::getAcl example
• Example#4731 - Zookeeper::getChildren example
• Example#4732 - Zookeeper::set example
• Example#4733 - Zookeeper::setAcl example
• Example#4734 - Zookeeper::setDebugLevel example
• Example#4735 - ZookeeperConfig::add example
• Example#4736 - ZookeeperConfig::get example
• Example#4737 - ZookeeperConfig::remove example
• Example#4738 - ZookeeperConfig::set example
• Example#4739 - solr_get_version 示例
• Example#4740 - Contents of the BootStrap file
• Example#4741 - Adding a document to the index
• Example#4742 - Merging one document into another document
• Example#4743 - Searching for documents - SolrObject responses
• Example#4744 - Searching for documents - SolrDocument responses
• Example#4745 - Simple TermsComponent example - basic
• Example#4746 - Simple TermsComponent example - using a prefix
• Example#4747 - Simple TermsComponent example - specifying a minimum frequency
• Example#4748 - Simple Facet Example
• Example#4749 - Simple Facet Example - with optional field override for mincount
• Example#4750 - Facet Date Example
• Example#4751 - Connecting to SSL-Enabled Server
• Example#4752 - Collapsing a SolrQuery
• Example#4753 - Solr Real Time Get (RTG) example SolrClient::getById
• Example#4754 - SolrInputDocument::addChildDocument example
• Example#4755 - SolrInputDocument::addChildDocuments example
• Example#4756 - SolrDocument::toArray example
• Example#4757 - SolrObject::__construct example
• Example#4758 - SolrObject::offsetUnset example
• Example#4759 - SolrClient::addDocument example
• Example#4760 - SolrClient::addDocument example 2
• Example#4761 - SolrClient::addDocuments example
• Example#4762 - SolrClient::__construct example
• Example#4763 - SolrQuery::deleteByQuery example
• Example#4764 - SolrClient::getById example
• Example#4765 - SolrClient::getByIds example
• Example#4766 - SolrClient::ping example
• Example#4767 - SolrClient::query example
• Example#4768 - SolrClient::request example
• Example#4769 - SolrClient::setResponseWriter example
• Example#4770 - SolrParams::setParam example
• Example#4771 - SolrQuery::addFacetField example
• Example#4772 - SolrQuery::addFacetField example
• Example#4773 - SolrQuery::addFilterQuery example
• Example#4774 - SolrQuery::addGroupSortField example
• Example#4775 - SolrQuery::collapse example
• Example#4776 - SolrQuery::setExpand example
• Example#4777 - SolrDisMaxQuery::addBigramPhraseField example
• Example#4778 - SolrDisMaxQuery::addBoostQuery example
• Example#4779 - SolrDisMaxQuery::addPhraseField example
• Example#4780 - SolrDisMaxQuery::addQueryField example
• Example#4781 - SolrDisMaxQuery::addTrigramPhraseField example
• Example#4782 - SolrDisMaxQuery::addUserField example
• Example#4783 - SolrDisMaxQuery::__construct example
• Example#4784 - SolrDisMaxQuery::removeBigramPhraseField example
• Example#4785 - SolrDisMaxQuery::removeBoostQuery example
• Example#4786 - SolrDisMaxQuery::removePhraseField example
• Example#4787 - SolrDisMaxQuery::removeQueryField example
• Example#4788 - SolrDisMaxQuery::removeTrigramPhraseField example
• Example#4789 - SolrDisMaxQuery::removeUserField example
• Example#4790 - SolrDisMaxQuery::setBigramPhraseFields example
• Example#4791 - SolrDisMaxQuery::setBigramPhraseSlop example
• Example#4792 - SolrDisMaxQuery::setBoostFunction example
• Example#4793 - SolrDisMaxQuery::setBoostQuery example
• Example#4794 - SolrDisMaxQuery::setMinimumMatch example
• Example#4795 - SolrDisMaxQuery::setPhraseFields example
• Example#4796 - SolrDisMaxQuery::setPhraseSlop example
• Example#4797 - SolrDisMaxQuery::setQueryAlt example
• Example#4798 - SolrDisMaxQuery::setQueryPhraseSlop example
• Example#4799 - SolrDisMaxQuery::setTieBreaker example
• Example#4800 - SolrDisMaxQuery::setTrigramPhraseFields example
• Example#4801 - SolrDisMaxQuery::setTrigramPhraseSlop example
• Example#4802 - SolrDisMaxQuery::setUserFields example
• Example#4803 - SolrDisMaxQuery::useDisMaxQueryParser example
• Example#4804 - SolrDisMaxQuery::useEDisMaxQueryParser example
• Example#4805 - SolrCollapseFunction::__construct example
• Example#4806 - SolrCollapseFunction::setHint example
• Example#4807 - SolrCollapseFunction::setMax example
• Example#4808 - 用 .htaccess 禁用一个目录的 PHP 解析
• Example#4809 - apache_get_modules 示例
• Example#4810 - apache_get_version 示例
• Example#4811 - apache_getenv 示例
• Example#4812 - apache_lookup_uri 例子
• Example#4813 - 在 PHP 与 Perl 之间传递信息
• Example#4814 - 在 access.log 中记录值
• Example#4815 - apache_request_headers 示例
• Example#4816 - apache_response_headers 示例
• Example#4817 - 使用 apache_setenv 设置一个 Apache 环境变量
• Example#4818 - getallheaders 示例
• Example#4819 - 在 $_SESSION 中注册变量。
• Example#4820 - 从 $_SESSION 中反注册变量。
• Example#4821 - 某单一用户的点击数
• Example#4822 - 样例信息
• Example#4823 - session_cache_expire 示例
• Example#4824 - session_cache_limiter 示例
• Example#4825 - session_create_id example with session_regenerate_id
• Example#4826 - 销毁会话数据以及 $_SESSION
• Example#4827 - session_gc example for task managers like cron
• Example#4828 - session_gc example for user accessible script
• Example#4829 - session_name 示例
• Example#4830 - A session_regenerate_id 示例
• Example#4831 - Avoiding lost session by session_regenerate_id
• Example#4832 - 自定义会话处理程序：完整代码请参见 SessionHandlerInterface。
• Example#4833 - page1.php
• Example#4834 - page2.php
• Example#4835 - 覆盖 Cookie 超时时间设定
• Example#4836 - 读取会话之后立即关闭会话存储文件
• Example#4837 - Using SessionHandler to add encryption to internal PHP save handlers.
• Example#4838 - Example using SessionHandlerInterface
• Example#4839 - Tokenize comma separated integer list
• Example#4840 - Tokenize assign statement
• Example#4841 - Simple calculator
• Example#4842 - Parse words out from a sentence
• Example#4843 - 合法模式示例
• Example#4844 - 非法模式示例
• Example#4845 - PCRE 模式中注释的用法
• Example#4846 - 比较preg_filter 和preg_replace的示例
• Example#4847 - preg_grep 示例
• Example#4848 - preg_last_error 示例
• Example#4849 - preg_last_error_msg example
• Example#4850 - 查找文本字符串"php"
• Example#4851 - 查找单词"word"
• Example#4852 - 获取URL中的域名
• Example#4853 - 使用命名子组
• Example#4854 - 查找所有文本中的电话号码。
• Example#4855 - 查找匹配的HTML标签（贪婪）
• Example#4856 - 使用子命名组
• Example#4857 - preg_quote示例
• Example#4858 - 将文本中的单词替换为斜体
• Example#4859 - 使用后向引用紧跟数值原文
• Example#4860 - preg_replace 中使用基于索引的数组
• Example#4861 - 替换一些值
• Example#4862 - 剥离空白字符
• Example#4863 - 使用参数 count
• Example#4864 - preg_replace_callback 和 匿名函数
• Example#4865 - preg_replace_callback示例
• Example#4866 - preg_replace_callback 使用递归构造处理 BB 码的封装
• Example#4867 - preg_replace_callback_array example
• Example#4868 - preg_split示例：获取搜索字符串的部分
• Example#4869 - 将一个字符串分隔为组成它的字符
• Example#4870 - 分隔一个字符串并获取每部分的偏移量
• Example#4871 - addcslashes 例子
• Example#4872 - 一个 addslashes 例子
• Example#4873 - bin2hex 示例
• Example#4874 - chr 例子
• Example#4875 - 溢出行为
• Example#4876 - 从单个字节构建 UTF-8 字符串
• Example#4877 - chunk_split 例子
• Example#4878 - convert_uudecode 例子
• Example#4879 - convert_uuencode 例子
• Example#4880 - count_chars 示例
• Example#4881 - 显示 crc32 校验和
• Example#4882 - crypt 示例
• Example#4883 - echo 示例
• Example#4884 -
• Example#4885 - explode 例子
• Example#4886 - explode return examples
• Example#4887 - limit 参数的例子
• Example#4888 - fprintf：零填充整数
• Example#4889 - fprintf：格式化货币
• Example#4890 - 转换表示例
• Example#4891 - hex2bin 例子
• Example#4892 - Decoding HTML entities
• Example#4893 - htmlentities 例子
• Example#4894 - ENT_IGNORE 用法示例
• Example#4895 - htmlspecialchars 例子
• Example#4896 - htmlspecialchars_decode 示例
• Example#4897 - implode 例子
• Example#4898 - lcfirst 例子：
• Example#4899 - levenshtein 例子：
• Example#4900 - localeconv example
• Example#4901 - ltrim的使用示例
• Example#4902 - md5 示例
• Example#4903 - md5_file 使用示例
• Example#4904 - metaphone basic example
• Example#4905 - Using the max_phonemes parameter
• Example#4906 - Using the max_phonemes parameter
• Example#4907 - money_format 例子
• Example#4908 - nl_langinfo example
• Example#4909 - nl2br 使用示例
• Example#4910 - 使用 use_xhtml 生成合法的 HTML 标记
• Example#4911 - 各种换行分隔符
• Example#4912 - number_format 示例
• Example#4913 - ord 示例
• Example#4914 - 检查 UTF-8 字符串的每一个字节
• Example#4915 - parse_str 的使用
• Example#4916 - parse_str 名称改写
• Example#4917 - print 示例
• Example#4918 -
• Example#4919 -
• Example#4920 - printf：多种 format 格式的示例
• Example#4921 - printf：字符串说明符
• Example#4922 - quoted_printable_decode 示例
• Example#4923 - quoted_printable_encode 示例
• Example#4924 - quotemeta 示例
• Example#4925 - rtrim 使用示例
• Example#4926 - setlocale 示例
• Example#4927 - Windows 的 setlocale 示例
• Example#4928 - sha1 示例
• Example#4929 - sha1_file 示例
• Example#4930 - similar_text 交换参数示例
• Example#4931 - Soundex Examples
• Example#4932 - 参数替换
• Example#4933 - 指定填充字符
• Example#4934 - 位置说明符与其他说明符
• Example#4935 - sprintf：零填充整数
• Example#4936 - sprintf：货币格式
• Example#4937 - sprintf：科学记数法
• Example#4938 - sscanf 示例
• Example#4939 - sscanf——使用可选参数
• Example#4940 - 使用空字符串 ''
• Example#4941 - 展示大小写区分
• Example#4942 - Basic str_decrement example
• Example#4943 - str_decrement example with a carry
• Example#4944 - 使用空字符串 ''
• Example#4945 - 展示大小写区分
• Example#4946 - str_getcsv 示例
• Example#4947 - 处理空字符串的 str_getcsv 示例
• Example#4948 - Basic str_increment example
• Example#4949 - str_increment example with a carry
• Example#4950 - str_ireplace 示例
• Example#4951 - str_pad 示例
• Example#4952 - str_repeat 示例
• Example#4953 - str_replace 基本示例
• Example#4954 - 可能的 str_replace 替换示例
• Example#4955 - str_rot13 示例
• Example#4956 - str_shuffle 示例
• Example#4957 - str_split 使用示例
• Example#4958 - 使用空字符串 ''
• Example#4959 - 展示大小写区分
• Example#4960 - str_word_count 示例
• Example#4961 - strcasecmp 示例
• Example#4962 - strcmp 例子
• Example#4963 - strcspn 示例
• Example#4964 - strip_tags 示例
• Example#4965 - stripcslashes 示例
• Example#4966 - stripos 示例
• Example#4967 - stripslashes 示例
• Example#4968 - 对数组使用 stripslashes
• Example#4969 - stristr 示例
• Example#4970 - 测试字符串的存在与否
• Example#4971 - 使用非字符串 needle
• Example#4972 - strlen 示例
• Example#4973 - strnatcasecmp 示例
• Example#4974 - strncasecmp 示例
• Example#4975 - strncmp 示例
• Example#4976 - strpbrk 示例
• Example#4977 - 使用 ===
• Example#4978 - 使用 !==
• Example#4979 - 使用位置偏移量
• Example#4980 - strrchr 示例
• Example#4981 - 使用 strrev 反转字符串
• Example#4982 - strripos 简单示例
• Example#4983 - 检查字串是否存在
• Example#4984 - 使用偏移位置进行查找
• Example#4985 - strspn 示例
• Example#4986 - strstr 示例
• Example#4987 - strtok 示例
• Example#4988 - 当 strtok 找不到标记时的反应
• Example#4989 - strtok 和 explode 的不同点
• Example#4990 - strtolower 示例
• Example#4991 - strtoupper 示例
• Example#4992 - strtr 示例
• Example#4993 - 使用两个参数的 strtr 示例
• Example#4994 - strtr 行为比较
• Example#4995 - 使用负数 offset
• Example#4996 - 使用负数 length
• Example#4997 - substr 基本用法
• Example#4998 - substr casting behaviour
• Example#4999 - 无效字符范围
• Example#5000 - substr_compare 示例
• Example#5001 - substr_count 示例
• Example#5002 - substr_replace 示例
• Example#5003 - 一次性使用 substr_replace 替换多个字符串
• Example#5004 - trim 使用示例
• Example#5005 - 使用 trim 清理数组值
• Example#5006 - ucfirst 示例
• Example#5007 - ucwords 示例
• Example#5008 - ucwords 自定义分隔符的例子
• Example#5009 - 带附加分隔符的 ucwords 示例
• Example#5010 - 基础示例
• Example#5011 - 基础示例
• Example#5012 - vfprintf: 前导 0 的整数
• Example#5013 - vprintf：补零整数
• Example#5014 - vsprintf: 前导 0 的整数
• Example#5015 - wordwrap 示例
• Example#5016 - wordwrap 示例
• Example#5017 - wordwrap 例子
• Example#5018 - array 例子
• Example#5019 - array 的自动索引
• Example#5020 - 从 1 开始索引的 array
• Example#5021 - 访问双引号内的数组
• Example#5022 - array_all example
• Example#5023 - array_any example
• Example#5024 - array_change_key_case例一
• Example#5025 - array_chunk 例子
• Example#5026 - 从结果集中取出 first_name 列
• Example#5027 - 从结果集中总取出 last_name 列，用相应的“id”作为键值
• Example#5028 - username 列是从对象获取 public 的 "username" 属性
• Example#5029 - 通过 __get 魔术方法从对象中获取 private 属性的 "name" 列。
• Example#5030 - 一个 array_combine 简单的例子
• Example#5031 - array_count_values 例子
• Example#5032 - array_diff 例子
• Example#5033 - array_diff 不匹配类型的示例
• Example#5034 - array_diff_assoc 示例
• Example#5035 - array_diff_assoc 示例
• Example#5036 - array_diff_key 例
• Example#5037 - array_diff_uassoc 示例
• Example#5038 - array_diff_ukey 例子
• Example#5039 - array_fill 例子
• Example#5040 - 开始索引为负数的 array_fill 示例
• Example#5041 - array_fill_keys 示例
• Example#5042 - array_filter 示例
• Example#5043 - array_filter 不使用 callback 参数时
• Example#5044 - array_filter 不使用 mode 参数时
• Example#5045 - array_find example
• Example#5046 - array_find_key example
• Example#5047 - array_flip 例子
• Example#5048 - array_flip 例子 : 冲突
• Example#5049 - array_intersect 例子
• Example#5050 - array_intersect_assoc 例子
• Example#5051 - array_intersect_key 例子
• Example#5052 - array_intersect_uassoc 例子
• Example#5053 - array_intersect_ukey 例子
• Example#5054 - array_is_list 示例
• Example#5055 - array_key_exists 示例
• Example#5056 - array_key_exists 与 isset 的对比
• Example#5057 - array_key_first 基本用法
• Example#5058 - array_keys 例子
• Example#5059 - array_map 例子
• Example#5060 - array_map 使用匿名函数
• Example#5061 - array_map：使用更多的数组
• Example#5062 - 多个数组的合并操作
• Example#5063 - 仅有 array1 时，callback 设置为 null
• Example#5064 - array_map 键（key）是 string
• Example#5065 - array_map - 关联数组
• Example#5066 - array_merge 示例
• Example#5067 - 单一结构的 array_merge 示例
• Example#5068 - array_merge 合并非数组的类型
• Example#5069 - array_merge_recursive 例子
• Example#5070 - 多个数组排序
• Example#5071 - 排序多维数组
• Example#5072 - 对数据库结果进行排序
• Example#5073 - 不区分大小写字母排序
• Example#5074 - array_pad 例子
• Example#5075 - array_pop 例子
• Example#5076 - array_product 示例
• Example#5077 - array_push 例子
• Example#5078 - array_rand 例子
• Example#5079 - array_reduce 例子
• Example#5080 - array_replace 示例
• Example#5081 - array_replace_recursive 示例
• Example#5082 - array_replace_recursive 及其递归表现
• Example#5083 - array_reverse 例子
• Example#5084 - array_search 例子
• Example#5085 - array_shift 例子
• Example#5086 - array_slice 例子
• Example#5087 - array_slice 于索引从 1 开始的 array
• Example#5088 - array_slice 与混合类型键的 array
• Example#5089 - array_splice 例子
• Example#5090 - 几个以不同表达式实现相同效果的 array_splice 例子
• Example#5091 - array_sum 例子
• Example#5092 - array_udiff 使用 stdClass 对象的示例
• Example#5093 - array_udiff 使用 DateTime 对象的示例
• Example#5094 - array_udiff_assoc 示例
• Example#5095 - array_udiff_uassoc 示例
• Example#5096 - array_uintersect 示例
• Example#5097 - array_uintersect_assoc 示例
• Example#5098 - array_uintersect_uassoc 示例
• Example#5099 - array_unique 例子
• Example#5100 - array_unique 和类型
• Example#5101 - array_unshift 示例
• Example#5102 - 关联数组用法
• Example#5103 - array_values 例子
• Example#5104 - array_walk 例子
• Example#5105 - array_walk example using anonymous function
• Example#5106 - array_walk_recursive 例子
• Example#5107 - arsort 示例
• Example#5108 - asort 示例
• Example#5109 - compact 示例
• Example#5110 - count 例子
• Example#5111 - count 非 Countable|array 的例子 （这是个反例，请勿模仿）
• Example#5112 - 递归 count 例子
• Example#5113 - Countable 对象
• Example#5114 - current 函数使用示例
• Example#5115 - each 例子
• Example#5116 - 用 each 遍历数组
• Example#5117 - end 例子
• Example#5118 - extract 例子
• Example#5119 - in_array 例子
• Example#5120 - in_array 严格类型检查例子
• Example#5121 - in_array 中用数组作为 needle
• Example#5122 - key 例子
• Example#5123 - krsort 示例
• Example#5124 - ksort 示例
• Example#5125 - 对使用 int 键的数组进行 ksort
• Example#5126 - list 例子
• Example#5127 - list 用法的一个例子
• Example#5128 - 使用嵌套的 list
• Example#5129 - list 和索引顺序定义
• Example#5130 - 带键的 list
• Example#5131 - natcasesort 示例
• Example#5132 - natsort 基本用法的操作示例
• Example#5133 - natsort 示例，解释了潜在的陷阱
• Example#5134 - next 及相关函数的用法示例
• Example#5135 - prev 及相关函数用法示例
• Example#5136 - range 示例
• Example#5137 - reset 例子
• Example#5138 - rsort 示例
• Example#5139 - shuffle 例子
• Example#5140 - sort 示例
• Example#5141 - 使用 sort 不区分大小写自然排序的示例
• Example#5142 - uasort 的基本示例
• Example#5143 - uksort 示例
• Example#5144 - usort 示例
• Example#5145 - 使用多维数组的 usort 示例
• Example#5146 - 使用一个对象的成员函数的 usort 示例
• Example#5147 - usort 示例，使用闭包对多维数组进行排序
• Example#5148 - 使用太空船运算符的 usort 示例
• Example#5149 - 定义类
• Example#5150 - test_script.php
• Example#5151 - class_alias 示例
• Example#5152 - class_exists 示例
• Example#5153 - autoload 参数示例
• Example#5154 - enum_exists 示例
• Example#5155 - get_called_class 的使用
• Example#5156 - 使用 get_class
• Example#5157 - 父类中使用 get_class
• Example#5158 - 命名空间中的类中使用 get_class
• Example#5159 - get_class_methods 示例
• Example#5160 - get_class_vars 示例
• Example#5161 - get_class_vars 和作用域行为
• Example#5162 - get_declared_classes 示例
• Example#5163 - get_declared_interfaces 示例
• Example#5164 - get_mangled_object_vars 示例
• Example#5165 - get_object_vars 使用
• Example#5166 - 使用 get_parent_class
• Example#5167 - interface_exists 示例
• Example#5168 - is_a 示例
• Example#5169 - 使用 instanceof 运算符
• Example#5170 - is_subclass_of 示例
• Example#5171 - is_subclass_of 使用接口示例
• Example#5172 - method_exists 示例
• Example#5173 - 静态 method_exists 示例
• Example#5174 - property_exists 示例
• Example#5175 - ctype_alnum 示例 (使用默认的区域设置)
• Example#5176 - ctype_alpha 例子（使用默认的语言环境）
• Example#5177 - ctype_cntrl 示例
• Example#5178 - ctype_digit 示例
• Example#5179 - ctype_digit 示例，比对字符和整数
• Example#5180 - ctype_graph 示例
• Example#5181 - ctype_lower 示例 (使用默认的语言环境)
• Example#5182 - ctype_print 示例
• Example#5183 - ctype_punct 示例
• Example#5184 - ctype_space 示例
• Example#5185 - ctype_upper 示例（使用当前默认语言环境）
• Example#5186 - ctype_xdigit 示例
• Example#5187 - 配置默认过滤器的表现像 htmlspecialchars
• Example#5188 - Configuring the default filter to act like htmlspecialchars
• Example#5189 - 使用 filter_var 验证电子邮件地址
• Example#5190 - 使用 filter_var 验证 IP 地址
• Example#5191 - 传递选项到 filter_var
• Example#5192 - 清理和验证电子邮件地址
• Example#5193 - 配置默认过滤器
• Example#5194 - 一个 filter_input 的例子
• Example#5195 - filter_input_array 示例
• Example#5196 - 一个 filter_list 的例子
• Example#5197 - 一个 filter_var 的示例
• Example#5198 - 过滤数组示例
• Example#5199 - 一个 filter_var_array 的例子
• Example#5200 - call_user_func 的参考例子
• Example#5201 - call_user_func 的例子
• Example#5202 - call_user_func 命名空间的使用
• Example#5203 - 用call_user_func来调用一个类里面的方法
• Example#5204 - 把完整的函数作为回调传入call_user_func
• Example#5205 - call_user_func_array例子
• Example#5206 - call_user_func_array使用命名空间的情况
• Example#5207 - 把完整的函数作为回调传入call_user_func_array
• Example#5208 - 传引用
• Example#5209 - call_user_func_array 使用命名参数
• Example#5210 - Creating a function dynamically, with create_function or anonymous functions
• Example#5211 - Making a general processing function, with create_function or anonymous functions
• Example#5212 - Using dynamic functions as callback functions
• Example#5213 - forward_static_call 示例
• Example#5214 - forward_static_call_array 示例
• Example#5215 - func_get_arg 例子
• Example#5216 - byRef 和 byVal 参数的 func_get_arg 示例
• Example#5217 - func_get_args 例子
• Example#5218 - byRef 和 byVal 参数的 func_get_args 示例
• Example#5219 - func_num_args 示例
• Example#5220 - function_exists 的例子
• Example#5221 - get_defined_functions 例子
• Example#5222 - register_shutdown_function 例子
• Example#5223 - register_tick_function 示例
• Example#5224 - Quickhash Example
• Example#5225 - Quickhash ArrayAccess Example
• Example#5226 - Quickhash Iterator Example
• Example#5227 - Quickhash String Values Example
• Example#5228 - QuickHashIntSet::add example
• Example#5229 - QuickHashIntSet::__construct example
• Example#5230 - QuickHashIntSet::delete example
• Example#5231 - QuickHashIntSet::exists example
• Example#5232 - QuickHashIntSet::getSize example
• Example#5233 - QuickHashIntSet::loadFromFile example
• Example#5234 - QuickHashIntSet::loadFromString example
• Example#5235 - QuickHashIntSet::saveToFile example
• Example#5236 - QuickHashIntSet::saveToString example
• Example#5237 - QuickHashIntHash::add example
• Example#5238 - QuickHashIntHash::__construct example
• Example#5239 - QuickHashIntHash::delete example
• Example#5240 - QuickHashIntHash::exists example
• Example#5241 - QuickHashIntHash::get example
• Example#5242 - QuickHashIntHash::getSize example
• Example#5243 - QuickHash IntHash file format
• Example#5244 - QuickHash IntHash file format
• Example#5245 - QuickHashIntHash::loadFromFile example
• Example#5246 - QuickHashIntHash::loadFromString example
• Example#5247 - QuickHashIntHash::saveToFile example
• Example#5248 - QuickHashIntHash::saveToString example
• Example#5249 - QuickHashIntHash::set example
• Example#5250 - QuickHashIntHash::update example
• Example#5251 - QuickHashStringIntHash::add example
• Example#5252 - QuickHashStringIntHash::__construct example
• Example#5253 - QuickHashStringIntHash::delete example
• Example#5254 - QuickHashStringIntHash::get example
• Example#5255 - QuickHashStringIntHash::getSize example
• Example#5256 - QuickHash StringIntHash file format
• Example#5257 - QuickHash IntHash file format
• Example#5258 - QuickHashStringIntHash::loadFromFile example
• Example#5259 - QuickHashStringIntHash::loadFromString example
• Example#5260 - QuickHashStringIntHash::saveToFile example
• Example#5261 - QuickHashStringIntHash::saveToString example
• Example#5262 - QuickHashStringIntHash::set example
• Example#5263 - QuickHashStringIntHash::update example
• Example#5264 - QuickHashIntStringHash::add example
• Example#5265 - QuickHashIntStringHash::__construct example
• Example#5266 - QuickHashIntStringHash::delete example
• Example#5267 - QuickHashIntStringHash::get example
• Example#5268 - QuickHashIntStringHash::getSize example
• Example#5269 - QuickHash IntString file format
• Example#5270 - QuickHash IntString file format
• Example#5271 - QuickHashIntStringHash::loadFromFile example
• Example#5272 - QuickHashIntStringHash::loadFromString example
• Example#5273 - QuickHashIntStringHash::saveToFile example
• Example#5274 - QuickHashIntStringHash::saveToString example
• Example#5275 - QuickHashIntStringHash::set example
• Example#5276 - QuickHashIntStringHash::update example
• Example#5277 - Shell （终端）里的反射示例
• Example#5278 - 扩展内置的类
• Example#5279 - Reflection::getModifierNames 示例
• Example#5280 - ReflectionClass 的基本用法
• Example#5281 - ReflectionClass::export 的基本用法
• Example#5282 - 基础用法
• Example#5283 - 通过类名过滤结果
• Example#5284 - 通过类名和继承过滤结果
• Example#5285 - 使用 ReflectionClass::getConstant
• Example#5286 - ReflectionClass::getConstructor 的基本用法
• Example#5287 - ReflectionClass::getDefaultProperties 示例
• Example#5288 - ReflectionClass::getDocComment 示例
• Example#5289 - ReflectionClass::getEndLine 示例
• Example#5290 - ReflectionClass::getExtension 的基本用法
• Example#5291 - ReflectionClass::getExtensionName 的基本用法
• Example#5292 - ReflectionClass::getInterfaceNames 示例
• Example#5293 - ReflectionClass::getInterfaces 示例
• Example#5294 - ReflectionClass::getMethod 的基本用法
• Example#5295 - ReflectionClass::getMethods 的基本用法
• Example#5296 - 从 ReflectionClass::getMethods 中过滤结果
• Example#5297 - ReflectionClass::getName 示例
• Example#5298 - ReflectionClass::getNamespaceName 示例
• Example#5299 - ReflectionClass::getProperties 过滤示例
• Example#5300 - ReflectionClass::getProperty 的基本用法
• Example#5301 - Basic ReflectionClass::getReflectionConstants example
• Example#5302 - ReflectionClass::getShortName 示例
• Example#5303 - ReflectionClass::getStaticPropertyValue 的基本用法
• Example#5304 - ReflectionClass::hasConstant 示例
• Example#5305 - ReflectionClass::hasMethod 示例
• Example#5306 - ReflectionClass::hasProperty 示例
• Example#5307 - Basic usage
• Example#5308 - ReflectionClass::inNamespace 示例
• Example#5309 - ReflectionClass::isAbstract 示例
• Example#5310 - ReflectionClass::isAnonymous 示例
• Example#5311 - ReflectionClass::isCloneable 的基本用法
• Example#5312 - ReflectionClass::isFinal 示例
• Example#5313 - ReflectionClass::isInstance 相关示例
• Example#5314 - ReflectionClass::isInstantiable 示例
• Example#5315 - ReflectionClass::isInterface 基本用法
• Example#5316 - ReflectionClass::isInternal 的基本用法
• Example#5317 - Basic ReflectionClass::isIterable Usage
• Example#5318 - ReflectionClass::isReadOnly example
• Example#5319 - Basic usage
• Example#5320 - Marking an uninitialized lazy object as initialized
• Example#5321 - Marking an initialized object as initialized
• Example#5322 - ReflectionClass::newInstanceArgs 的基本用法
• Example#5323 - Basic usage
• Example#5324 - Basic usage
• Example#5325 - ReflectionClass::__toString 示例
• Example#5326 - Basic usage
• Example#5327 - Filtering results by class name
• Example#5328 - Filtering results by class name, with inheritance
• Example#5329 - ReflectionClassConstant::isDeprecated example
• Example#5330 - ReflectionClassConstant::isEnumCase example
• Example#5331 - ReflectionEnum::getBackingType 示例
• Example#5332 - ReflectionEnum::getCase 示例
• Example#5333 - ReflectionEnum::getCases 示例
• Example#5334 - ReflectionEnum::hasCase 示例
• Example#5335 - ReflectionEnum::isBacked 示例
• Example#5336 - ReflectionEnum::getValue 示例
• Example#5337 - ReflectionEnum::getBackingValue 示例
• Example#5338 - ReflectionExtension 示例
• Example#5339 - ReflectionExtension::getClasses 示例
• Example#5340 - ReflectionExtension::getClassNames 示例
• Example#5341 - ReflectionExtension::getConstants example
• Example#5342 - ReflectionExtension::getDependencies example
• Example#5343 - ReflectionExtension::getFunctions 示例
• Example#5344 - ReflectionExtension::getINIEntries 示例
• Example#5345 - ReflectionExtension::getName 示例
• Example#5346 - ReflectionExtension::getVersion 示例
• Example#5347 - ReflectionExtension::info 示例
• Example#5348 - ReflectionFunction::__construct example
• Example#5349 - ReflectionFunction::invoke example
• Example#5350 - ReflectionFunction::invokeArgs example
• Example#5351 - ReflectionFunction::invokeArgs with references example
• Example#5352 - ReflectionFunction::isAnonymous example
• Example#5353 - ReflectionFunction::__toString example
• Example#5354 - Basic usage with a class method
• Example#5355 - Basic usage with a function
• Example#5356 - Filtering results by class name
• Example#5357 - Filtering results by class name, with inheritance
• Example#5358 - Example showcasing difference between ReflectionFunctionAbstract::getClosureCalledClass, ReflectionFunctionAbstract::getClosureScopeClass, and ReflectionFunctionAbstract::getClosureThis with a closure in the object context
• Example#5359 - Example showcasing difference between ReflectionFunctionAbstract::getClosureCalledClass, ReflectionFunctionAbstract::getClosureScopeClass, and ReflectionFunctionAbstract::getClosureThis with a static closure without an object context
• Example#5360 - Example showcasing difference between ReflectionFunctionAbstract::getClosureCalledClass, ReflectionFunctionAbstract::getClosureScopeClass, and ReflectionFunctionAbstract::getClosureThis with a closure in the object context
• Example#5361 - Example showcasing difference between ReflectionFunctionAbstract::getClosureCalledClass, ReflectionFunctionAbstract::getClosureScopeClass, and ReflectionFunctionAbstract::getClosureThis with a static closure without an object context
• Example#5362 - ReflectionFunctionAbstract::getClosureUsedVariables example
• Example#5363 - ReflectionFunctionAbstract::getReturnType example
• Example#5364 - Usage on built-in functions
• Example#5365 - ReflectionFunctionAbstract::getTentativeReturnType example
• Example#5366 - ReflectionFunctionAbstract::hasReturnType example
• Example#5367 - Usage on built-in functions
• Example#5368 - ReflectionFunctionAbstract::hasTentativeReturnType example
• Example#5369 - ReflectionFunctionAbstract::isClosure 示例
• Example#5370 - ReflectionFunctionAbstract::isDeprecated 示例
• Example#5371 - ReflectionMethod::__construct 示例
• Example#5372 - ReflectionMethod::createFromMethodName example
• Example#5373 - ReflectionMethod::getDeclaringClass 示例
• Example#5374 - ReflectionMethod::getModifiers 示例
• Example#5375 - ReflectionMethod::getPrototype 示例
• Example#5376 - ReflectionMethod::hasPrototype example
• Example#5377 - ReflectionMethod::invoke 示例
• Example#5378 - ReflectionMethod::invokeArgs 示例
• Example#5379 - 简单类定义
• Example#5380 - ReflectionMethod::__toString 示例
• Example#5381 - ReflectionNamedType::isBuiltin 示例
• Example#5382 - Using the ReflectionParameter class
• Example#5383 - Basic usage
• Example#5384 - Filtering results by class name
• Example#5385 - Filtering results by class name, with inheritance
• Example#5386 - 使用 ReflectionParameter 类
• Example#5387 - Getting the class that declared the method
• Example#5388 - Getting default values of function parameters
• Example#5389 - Getting default values' constant names of function parameters
• Example#5390 - ReflectionParameter::getType Usage as of PHP 7.1.0
• Example#5391 - ReflectionParameter::getType Usage before PHP 7.1.0
• Example#5392 - ReflectionParameter::getType Usage in PHP 8.0.0 and later
• Example#5393 - ReflectionParameter::hasType example
• Example#5394 - PHP 8.0.0 equivalent
• Example#5395 - PHP 8.0.0 equivalent
• Example#5396 - ReflectionParameter::__toString example
• Example#5397 - ReflectionProperty::__construct example
• Example#5398 - Getting value from private and protected properties using ReflectionProperty class
• Example#5399 - Basic usage
• Example#5400 - Filtering results by class name
• Example#5401 - Filtering results by class name, with inheritance
• Example#5402 - ReflectionProperty::getDefaultValue example
• Example#5403 - ReflectionProperty::getDocComment example
• Example#5404 - Multiple property declarations
• Example#5405 - ReflectionProperty::getType example
• Example#5406 - ReflectionProperty::getValue example
• Example#5407 - ReflectionProperty::hasDefaultValue example
• Example#5408 - ReflectionProperty::hasType example
• Example#5409 - ReflectionProperty::isDefault example
• Example#5410 - ReflectionProperty::isInitialized example
• Example#5411 - ReflectionProperty::isPromoted example
• Example#5412 - Simple Class definition
• Example#5413 - ReflectionProperty::setValue example
• Example#5414 - ReflectionType::allowsNull example
• Example#5415 - ReflectionType::__toString example
• Example#5416 - ReflectionUnionType::getTypes 示例
• Example#5417 - ReflectionGenerator::__construct example
• Example#5418 - ReflectionGenerator::getExecutingFile example
• Example#5419 - ReflectionGenerator::getExecutingGenerator example
• Example#5420 - ReflectionGenerator::getExecutingLine example
• Example#5421 - ReflectionGenerator::getFunction example
• Example#5422 - ReflectionGenerator::getThis example
• Example#5423 - ReflectionGenerator::getTrace example
• Example#5424 - ReflectionGenerator::isClosed example
• Example#5425 - ReflectionIntersectionType::getTypes 示例
• Example#5426 - 基本的 ReflectionReference::getId 用法
• Example#5427 - boolval examples
• Example#5428 - debug_zval_dump 示例
• Example#5429 - 一个简单的 empty 与 isset 的比较。
• Example#5430 - 在字符串偏移量上使用 empty
• Example#5431 - floatval 示例
• Example#5432 - floatval 最左边的字符为非数字的示例
• Example#5433 - get_debug_type 示例
• Example#5434 - get_defined_vars 示例
• Example#5435 - get_resource_id 与 int 转换的结果相同
• Example#5436 - get_resource_type 示例
• Example#5437 - gettype 示例
• Example#5438 - intval 例子
• Example#5439 - 检测变量是否是数组
• Example#5440 - is_bool 示例
• Example#5441 - is_callable 例子
• Example#5442 - is_callable 和构造函数
• Example#5443 - is_countable 示例
• Example#5444 - is_float 示例
• Example#5445 - is_int 示例
• Example#5446 - is_iterable 示例
• Example#5447 - is_null 示例
• Example#5448 - is_numeric 示例
• Example#5449 - 带有空格的 is_numeric
• Example#5450 - is_object 示例
• Example#5451 - is_resource 示例
• Example#5452 - is_scalar 示例
• Example#5453 - is_string 示例
• Example#5454 - isset 例子
• Example#5455 - 在字符串位移中使用 isset
• Example#5456 - print_r 例子
• Example#5457 - return 参数的例子
• Example#5458 - serialize 示例
• Example#5459 - settype 示例
• Example#5460 - 使用 PHP 魔术方法 __toString() 的 strval 示例。
• Example#5461 - unserialize 例子
• Example#5462 - unserialize_callback_func 例子
• Example#5463 - unset 示例
• Example#5464 - 使用 (unset) 类型强制转换
• Example#5465 - var_dump 例子
• Example#5466 - var_export 示例
• Example#5467 - 输出 stdClass 类 (自 PHP 7.3.0 起)
• Example#5468 - 输出对象 (自 PHP 5.1.0 起)
• Example#5469 - 使用 __set_state()
• Example#5470 -
• Example#5471 - OAuth::fetch example
• Example#5472 - OAuth::getAccessToken 例子
• Example#5473 - OAuth::getRequestToken 例子
• Example#5474 - OAuth::setRequestEngine 例子
• Example#5475 - 一个 OAuth::setRsaCertificate 例子
• Example#5476 - OAuth::setToken 例子
• Example#5477 - OAuthProvider::__construct 例子
• Example#5478 - OAuthProvider::consumerHandler 回调的例子
• Example#5479 - OAuthProvider::generateToken 例子
• Example#5480 - OAuthProvider::is2LeggedEndpoint 例子
• Example#5481 - OAuthProvider::timestampNonceHandler 回调的例子
• Example#5482 - OAuthProvider::tokenHandler 回调的例子
• Example#5483 - is_soap_fault example
• Example#5484 - SOAP's standard method for error reporting is exceptions
• Example#5485 - Specifying use of TLS 1.3 only
• Example#5486 - SoapClient::__construct example
• Example#5487 - Using the SOAP_SINGLE_ELEMENT_ARRAYS feature
• Example#5488 - SoapClient::__doRequest example
• Example#5489 - SoapClient::__getFunctions example
• Example#5490 - SoapClient::__getLastRequest() example
• Example#5491 - SoapClient::__getLastRequestHeaders() example
• Example#5492 - SoapClient::__getLastResponse() example
• Example#5493 - SoapClient::__getLastResponse() example
• Example#5494 - SoapClient::__getTypes example
• Example#5495 - SoapClient::__setLocation example
• Example#5496 - SoapClient::__setSoapHeaders example
• Example#5497 - Set Multiple Headers
• Example#5498 - SoapClient::__soapCall example
• Example#5499 - SoapServer::addFunction 示例
• Example#5500 - SoapServer::__construct example
• Example#5501 - SoapServer::getFunctions example
• Example#5502 - SoapServer::__getLastResponse() example
• Example#5503 - SoapServer::handle example
• Example#5504 - SoapServer::setPersistence example
• Example#5505 - Some examples
• Example#5506 - Some examples
• Example#5507 - SoapHeader::__construct example
• Example#5508 - SoapParam::__construct example
• Example#5509 - SoapVar::__construct example
• Example#5510 - Yar Server示例
• Example#5511 - 通过浏览器访问(GET请求)
• Example#5512 - Yar Client示例
• Example#5513 - Yar Concurrent Client示例
• Example#5514 - Yar_Server::__construct 示例
• Example#5515 - Yar_Server::handle 示例
• Example#5516 - Yar_Client::__call 示例
• Example#5517 - Yar_Client::__construct 示例
• Example#5518 - Yar_Client::setOpt 示例
• Example#5519 - Yar_Concurrent_Client::call示例
• Example#5520 - Yar_Concurrent_Client::loop 示例
• Example#5521 - Yar_Concurrent_Client::reset example
• Example#5522 - Yar_Server_Exception::getType 示例
• Example#5523 - Yar_Client_Exception::getType 示例
• Example#5524 - XMLRPC 客户端函数示例
• Example#5525 - XML-RPC 类型示例
• Example#5526 - xmlrpc_set_type 示例
• Example#5527 - For Each in ASP
• Example#5528 - foreach in PHP
• Example#5529 - com example (1)
• Example#5530 - com example (2)
• Example#5531 - dotnet example
• Example#5532 - variant example
• Example#5533 - Basic COMPersistHelper::saveToFile Usage
• Example#5534 - COM event sink example
• Example#5535 - Registering a PHP script to run as a service
• Example#5536 - Unregistering a service
• Example#5537 - Running as a service
• Example#5538 - A win32_create_service example
• Example#5539 - A win32_create_service example with dependencies
• Example#5540 - A win32_create_service example with recovery
• Example#5541 - A win32_delete_service example
• Example#5542 - A win32_start_service_ctrl_dispatcher example
• Example#5543 - book.xml
• Example#5544 - Creating a new DOMAttr object
• Example#5545 - DOMAttr::isId() Example
• Example#5546 - Creating a new DOMCdataSection object
• Example#5547 - DOMCharacterData::after example
• Example#5548 - DOMCharacterData::before example
• Example#5549 - DOMCharacterData::remove example
• Example#5550 - DOMCharacterData::replaceWith example
• Example#5551 - Creating a new DOMComment
• Example#5552 - DOMDocument::adoptNode example
• Example#5553 - DOMDocument::append example
• Example#5554 - Creating a new DOMDocument
• Example#5555 - Creating a new element and inserting it as root
• Example#5556 - Passing text containing an unescaped & as value
• Example#5557 - Creating a new element and inserting it as root
• Example#5558 - A namespace prefix example
• Example#5559 - DOMDocument::getElementById() Example
• Example#5560 - Basic Usage Example
• Example#5561 - Get all the XInclude elements
• Example#5562 - DOMDocument::importNode example
• Example#5563 - Creating a Document
• Example#5564 - Creating a Document
• Example#5565 - Creating a Document
• Example#5566 - Creating a Document
• Example#5567 - DOMDocument::prepend example
• Example#5568 - Adding a new method to DOMElement to ease our code
• Example#5569 - Retrieving elements as custom class
• Example#5570 - Retrieving owner document
• Example#5571 - Custom objects are transient
• Example#5572 - DOMDocument::replaceChildren example
• Example#5573 - Saving a DOM tree into a file
• Example#5574 - Saving a HTML tree into a string
• Example#5575 - Saving a HTML tree into a file
• Example#5576 - Saving a DOM tree into a string
• Example#5577 - Example of DTD validation
• Example#5578 - DOMDocument::xinclude() example
• Example#5579 - DOMDocumentFragment::append example
• Example#5580 - Appending XML data to your document
• Example#5581 - DOMDocumentFragment::prepend example
• Example#5582 - DOMDocumentFragment::replaceChildren example
• Example#5583 - DOMElement::after example
• Example#5584 - DOMElement::append example
• Example#5585 - DOMElement::before example
• Example#5586 - Creating a new DOMElement
• Example#5587 - DOMElement::getAttributeNames example
• Example#5588 - DOMElement::insertAdjacentElement example
• Example#5589 - DOMElement::insertAdjacentText example
• Example#5590 - DOMElement::prepend example
• Example#5591 - DOMElement::remove example
• Example#5592 - DOMElement::replaceChildren example
• Example#5593 - DOMElement::replaceWith example
• Example#5594 - Setting an attribute
• Example#5595 - DOMElement::toggleAttribute example
• Example#5596 - Creating a new DOMEntityReference
• Example#5597 - Creating a document with an attached DTD
• Example#5598 - Testing your DOM Implementation
• Example#5599 - Getting an attribute on a node
• Example#5600 - Accessing attribute with array syntax
• Example#5601 - Adding a child
• Example#5602 - Nested children
• Example#5603 - Example with XPath query
• Example#5604 - DOMNode::compareDocumentPosition example
• Example#5605 - DOMNode::contains example
• Example#5606 - DOMNode::getLineNo example
• Example#5607 - DOMNode::getNodePath example
• Example#5608 - DOMNode::getRootNode example
• Example#5609 - DOMNode::isEqualNode example
• Example#5610 - Removing a child
• Example#5611 - Traversing all the entries of the table
• Example#5612 - Accessing item with array syntax
• Example#5613 - Traversing items with foreach
• Example#5614 - DOMParentNode::replaceChildren example
• Example#5615 - Creating a new DOMProcessingInstruction object
• Example#5616 - Creating a new DOMText
• Example#5617 - Getting the count of all the english books
• Example#5618 - Getting all the english books
• Example#5619 - Matching attribute value with quotes
• Example#5620 - book.xml
• Example#5621 - DOMXPath::registerPHPFunctions with php:functionString
• Example#5622 - DOMXPath::registerPHPFunctions with php:function
• Example#5623 - Import SimpleXML into DOM with dom_import_simplexml
• Example#5624 - Import SimpleXML into DOM and modify SimpleXML through DOM
• Example#5625 - A libxml_get_errors example
• Example#5626 - libxml_set_external_entity_loader example
• Example#5627 - A libxml_set_streams_context example
• Example#5628 - A libxml_use_internal_errors example
• Example#5629 - Include file example.php with XML string
• Example#5630 - Getting <plot>
• Example#5631 - Getting <line>
• Example#5632 - Accessing non-unique elements in SimpleXML
• Example#5633 - Using attributes
• Example#5634 - Comparing Elements and Attributes with Text
• Example#5635 - Comparing Two Elements
• Example#5636 - Using XPath
• Example#5637 - Setting values
• Example#5638 - Adding elements and attributes
• Example#5639 - DOM Interoperability
• Example#5640 - Loading broken XML string
• Example#5641 - Add attributes and children to a SimpleXML element
• Example#5642 - Add attributes and children to a SimpleXML element
• Example#5643 - Get XML
• Example#5644 - Using asXML() on SimpleXMLElement::xpath results
• Example#5645 - Interpret an XML string
• Example#5646 - Traversing a children() pseudo-array
• Example#5647 - Using namespaces
• Example#5648 - Create a SimpleXMLElement object
• Example#5649 - Create a SimpleXMLElement object from a URL
• Example#5650 - Counting the number of children
• Example#5651 - Return the current element
• Example#5652 - Get document namespaces
• Example#5653 - Working with multiple namespaces
• Example#5654 - Get XML element names
• Example#5655 - Get document namespaces in use
• Example#5656 - Return the sub-elements of the current element
• Example#5657 - Check whether the current element has sub-elements
• Example#5658 - Get the current XML tag key
• Example#5659 - Move to the next element
• Example#5660 - Setting a namespace prefix to use in an XPath query
• Example#5661 - Rewind to the first element
• Example#5662 - Get string content
• Example#5663 - Check whether the current element is valid
• Example#5664 - Xpath
• Example#5665 - Importing DOM
• Example#5666 - Interpret an XML document
• Example#5667 - Interpret an XML string
• Example#5668 - Serializing a single value with WDDX
• Example#5669 - Using incremental packets with WDDX
• Example#5670 - wddx_serialize_vars example
• Example#5671 - 显示 XML 元素结构
• Example#5672 - 将 XML 映射为 HTML
• Example#5673 - 外部实体示例
• Example#5674 - xmltest.xml
• Example#5675 - xmltest2.xml
• Example#5676 - 分块解析大型 XML 文档
• Example#5677 - xml_parse_into_struct 示例
• Example#5678 - moldb.xml - 分子信息的小型数据库
• Example#5679 - parsemoldb.php - 将 moldb.xml 解析到分子（molecular）对象的数组中
• Example#5680 - xml_set_object 示例
• Example#5681 - Validating XML
• Example#5682 - Creating a simple XML document
• Example#5683 - Working with XML namespaces
• Example#5684 - Working with the OO API
• Example#5685 - Direct output of XML
• Example#5686 - XMLWriter::setIndent and mixed Content
• Example#5687 - Basic XMLWriter::startAttribute Usage
• Example#5688 - Intermixing Sub-elements and Attributes
• Example#5689 - Basic xmlwriter_write_cdata Usage
• Example#5690 - collection.xml
• Example#5691 - collection.xsl
• Example#5692 - fruits.xml
• Example#5693 - fruits.xsl
• Example#5694 - Collating and printing errors
• Example#5695 - Creating an XSLTProcessor
• Example#5696 - Testing EXSLT support
• Example#5697 - Simple PHP Function call from a stylesheet
• Example#5698 - Changing the owner before the transformation
• Example#5699 - Example profiling output
• Example#5700 - Transforming to a DOMDocument
• Example#5701 - Transforming to a HTML file
• Example#5702 - Transforming to a string
• Example#5703 - 隐藏的 HTML 表单单元
• Example#5704 - 等待用户编辑的数据
• Example#5705 - URL 中的例子
• Example#5706 - PHP/FI 代码示例
• Example#5707 - dev. 域名激活完整的屏幕错误报告
• Example#5708 - 受保护的区域添加安全脚本
• Example#5709 - Unix include_path
• Example#5710 - Windows include_path
• Example#5711 - Unix include_path 使用 ${USER} env 变量
• Example#5712 - string.rot13
• Example#5713 - string.toupper
• Example#5714 - string.tolower
• Example#5715 - string.strip_tags
• Example#5716 - convert.base64-encode & convert.base64-decode
• Example#5717 - convert.quoted-printable-encode & convert.quoted-printable-decode
• Example#5718 - convert.iconv.*
• Example#5719 - zlib.deflate 和 zlib.inflate
• Example#5720 - zlib.deflate 简单参数用法
• Example#5721 - bzip2.compress 和 bzip2.decompress
• Example#5722 - 用 Blowfish 算法加解密
• Example#5723 - 将文件以 SHA256 HMAC 的 AES-128 CBC 加密